Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Schedule-A |
| 2 | Demolition of wall and ceiling and boards (Fibre, pulp, insulation etc.) or insulation board / slabs any thickness incl cover fillets complete all as specified and as directed by Engineer- in- Charge.. |
| 3 | S&F4 mm thick Aluminium Composite Panel with combination of aluminium skin material of 0.25mm thick (coloured sheet as directed) aluinium sheet of alloy grade 1100H cover material, coated, on external side with PVDF coating containing 70% resin for anti-fungal & anti bacterial properties and the centre core shall be with natural polyethylene (LDPE and HDPE) bonded to the aluminium skin on both side. Cladding panel to be fixed on aluminium frame Section 14043 size 44.45 x 25.40 x 3.20 mm with rawal plug and SS Screws al as approved on walls,ceiling and roof including necessary accessories, Panel of framing size appx 1.20 x 0.6m complete all as per manufacturer\"s instructions and as directed by Engr-in-Charge Make : Lenonox/reyno bond/Alpolic/Allex and Equivalent all as specified and as directed by Engineer-in-Charge. |
| 4 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand mixed with Liquid WPC) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand: 2 stone chipping 6mm t0 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) |
| 5 | M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using Aluminium Channel, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as specified and directed by Engineer-in-charge. |
| 6 | M&L water proofing treatment on roof and sunken portion of floor andvertical surface including taking down of old bituminious felt and removing from MoD land consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 Kg/sqm including preparation of roof surfaces (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified.(c) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/ sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed. |
| 7 | M&L for applyingtwo coat Bitumenwater proofing aluminium heat resistance painton the roof as per manufacture instructions complete all as specified and directed by Engr-in-Charge. Make : PLASCON/PLASCON or equivalent. |
| 8 | Taking down Chowkhats or frames not exc 1.5 Sqm each with shutters (without taking of shutter from the frame) all as specifed. |
| 9 | Taking down Chowkhats or framesexc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking of shutter from the frame) all as specifed. |
| 10 | S&F aluminium colour powder coated door Frame and shutter single or double leaf glazed/pre laminated particle board interior panels fabricated including aluminium powder coated beading rubber Gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Door Shutter Vertical Style of Size 85x44.45x2 mm as per spd. (c) Door Shutter Top style section 95.25x44.45x2.00 mm as per spd.(d) Aluminium coloured powder coated middle lock rail/bottom rail section 150x44.45x1.93mm cat No.20002.(e) Aluminium coloured powder coated Tower Bolt 02 Nos in each shutter 200 mm long as spd. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long as per spd.(g) Door Floor spring ISI Marked Make-Sandhu, Amar or equivalent.(h) Six lever mortice lock brass on in each door.(j) 12 mm thick partical board (pre laminated both face) exterior grade ISI Marked(k) Tinted glass/Plain glass(Colour) 5mm thick. |
| 11 | S&F aluminium colouredpower coated (shade or tint as directed by GE) Side Hung window/ventilator frame and Shutter with section as per TD-109/2012 sheet (1/4 to 4/4) comprising the following:-(a) Al coloured powder coated window frame section 101.60x44.45x1.93 mm fixed as per spd(b) Aluminium colouredpower coated double shutter (Glass and Wire Mesh shutter) 44x44x1.50mm top/bottom/sides style. (c) Aluminium colouredpower coated butt hinges 8 Nos in each window 100 mm sizes as per spd. (d) Aluminium colouredpower coated tower bolt 3 Nos in each window 150 mm long as per spd.(e) Aluminium colouredpower coated handle 2 Nos in each window 100 mm long as per spd.(f) Tinted/coloured glass 5 mm thick fixed to window with rubber gasket & Al Powder coated beading.(g) Aluminium colouredpower coated grill make deco grill DG-104 fixed with \"H\" Section.Note : If groundrequirement for sliding window/AC windowcontractor should provide as per direction of Engineer-in-Charge without any price adjustment. |
| 12 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, fixing in opening as per specification & drawing. |
| 13 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain printed PVC Sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beaading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; supplying & fixing in the frame at site as per specification & drawing. |
| 14 | S&F butt hinges medium weight MS cold rolled 100mm long, complete all as specified and directed by Engr-in-charge. |
| 15 | S&F 200 mm long aluminium anodised barrel tower bolt to extruded section and fixed, complete all as specified and directed by Engr-in-charge. |
| 16 | S&F 150 mm aluminium handle, cast type anodised, complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F 300 mm long aluminum alloy, anodised, sliding door bolt long whith hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixidng bolts and siliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed by Engr-in-Charge. |
| 18 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the same from Site(s), complete all as specified and as directed, complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for 20 mm thick rendering in CM 1:4 by on brick/concrete surfaces of sunken slab, mixed with liquid water proofing compound both floor and wall of sunken slab, the surface shall be cured and allow to dry, finished even and smooth without using extra cementcomplete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately. |
| 20 | M&L applying evenly two coatcemetious/ liquid waterproofingcoating on sunken slab/ceiling/wall as per manufacturer instructions including cleaning surface complete all as specified.Make :- Doctor Fixit/ SIKA/FOSROC/STP/CHOKSEY CHEMICAL/APURVA INDIA/BOSTIK INDIA/STP/MARUTI BITUMEN. |
| 21 | M&L for PCC 1:5:10 type E2 Using 40mm graded stone aggregate as in filling under floor/sunken slab, complete all as specified and directed by Engr-in-Charge. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises completed all as specified and as directed. |
| 23 | M&L providing 50 mm thick cement concrete type B1,1:2:4 (20mm graded aggregate) as in floor finish complete all as specified and as directed. |
| 24 | M&L non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular ) area of each tile exceedng0.06 sqm but not exceeding 0.11 sqmin floors etcset and jointed in neat cement slurry andpointed in white/coloured cement to match over and including15 mm thick screed bed in cement mortarin(1:6) completeall as specified and as directed by Engineer-in-Charge. |
| 25 | M&L for glazed ceramic coloured tilesin vertical surface 350 x 250 x 7mm /450 x 350 x 7mm thick set in walls set and jointed in neat cementslurry over and including 15 mm thick backing coat in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting, dado etc completeall as specified and as directed by Engineer-in-Charge. |
| 26 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bedding layers of cement mortar 1:6 and pointed with white or coloured cement to match, the shade of the tiles, complete all as specified and as directed. |
| 27 | Dismantling of brick work built in cement mortar including all quions, arches, pillars, etc.completed all as specified and as directed |
| 28 | M&L for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 completed all as specified and as directed |
| 29 | Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included (up to 4th storey) with necessary scaffolding and safety measures) |
| 30 | M&L for 15 mm thick rendering in CM 1:4 on brick/concrete surfaces of wall, mixed with integral water proofing compound, the surface shall be cured and allow to dry, finished even and smooth without using extra cement (up to 4th storey) complete all as specified and directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately. |
| 31 | M&L for 15mm thick rendering on brick or concrete surfaces in internal surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 32 | M & L for5mm thick rendering in CM 1:3 on brick/stone/concrete surfaces of ceiling mixed with integral water proofing compound finished the surface even & smooth without using extra cement including preparing of new plastered surface of ceiling and applying two coats of white wash over a coat of primer . complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply only liquid water proofing compound |
| 34 | M&L for prepration of new plastered/un plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including necessary (scoffolding 4th storey). |
| 35 | M&L for preparation of newly plastered surfaces of walls by Vacuum based sanding machine complete all as specified,applying wall careputty upto 1mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over a coat of approved primerby auto rollercomplete all as specified & directed by Engineer-in-Charge. |
| 36 | M&L for comlpete removal of existing treatment from old decorated plastered surfaces of walls by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with putty, applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform adn proper mixing of putty) and applying two coats of oil bound distemper white or coloured over a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-charge. |
| 37 | M&L for complete removalof existingtreatment from old decorated plasterred surfaces of walls by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion anti fungal paint 100% acrilic smooth exterior paint @ 1.67 Ltr/ 10 Sqm, colour as approved by GE, over & including a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L for comlpete removal of existing treatment from old decorated plastered surfaces on ceilings by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with putty and applying two coats of white wash white or coloured over a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-charge. |
| 39 | Taking upor down 15mm dia GI Tubing and connection including, cleaning for refixing or removal to storecomplete all as specified.. |
| 40 | -ditto- as per item No 38, but 20 mm dia. |
| 41 | S&F 15mm bore GI tubing medium grade with all fittings fixed to walls or laid in floorscomplete all as specified. |
| 42 | -ditto- as per item No 40 above but 20 mm bore |
| 43 | S&F in repair 15 mm bore fency type CP Bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule and fixed |
| 44 | S&F in repair Fancy type two way Bib tap 15mm Bore,Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.(MAKE MARC/JAGUAR/PRIMA/SONA/GEM or equivalent out of makes specified in list of makes). |
| 45 | S&F in rep 15 mm fancy type angle stop valves, cast copper alloy, screwed down high pressure,with crutch or butterfly handle scresed both ends for iron pipe or for unions and fixed. |
| 46 | -ditto- as per item No 44 above but 20 mm dia. |
| 47 | S&F in repair Stop valve CP 15mm bore(Concealed type), cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union,complete all as specified and as directed.. |
| 48 | S&F in repair 20 mm gun-metal, globe or gate valves, screwd both ends for iron pipe and fixed. |
| 49 | S&F in repair, 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered, ISI marked, hoisted and fixed in position including tank neeples of required size and 20 mm bore dia pipe ball brass valve high pressure with plolythelene float and flynutcomplete all as specified in SSR Part I complete all as specified and as directed. |
| 50 | S&F Viterious china Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, size 580X440 mm White, with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime Concrete Bedding including taking out unserviceable WC Pan and connected Items, complete all as specified and as directed. |
| 51 | S&F vitreous china premium/1st quality wash down water closet wall hung EWC white /ivory/off white (closed pattern incl all necessary acessories like rag bolts/ gel gaskit etc, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etcin repair (excluding flushing cistern & flush pipe) complete in all respect all as specified (Make- Cera/Parryware) |
| 52 | S&F in repair of floor /wallmounted western toilet/commode S/P trap square type seat in built in single pices white water closet (EWC) including seat cover complete all fittings cmplete all as spd and directed by Engr-in-charge. |
| 53 | S&F plastic water closed seat/ coloured close pattern with flat bottom and cover & mild steel chromiumplated or aluminised highing device complete all as specified. |
| 54 | S&F PVC (SWR) \"S\" trap 110 mm bore, complete all as speicified and directed by Engr-in-charge. |
| 55 | S&F in repair PVC valveless syphonic action type flushing cistern low level 10 ltr capacity, white with inlet, ball valve,flat and handle including brackets, flush pipe of polythylene of low or high density or PVC , 32 mm dia for lovele cistern complete all as specified. |
| 56 | Vitreous China half stal urinals, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 57 | M&L 12 mm thick Toughned glass as in hinged doors, partitions automatic doors, Urinal Partition and similar work including cutting to shape, drilling holes required, complete all as specified and directed by Engr-in-charge. |
| 58 | S&F Gratings complete all as specified and directed by Engr-in-Charge, |
| 59 | S&F PVC connection 15mm size PTMT nut of length 750 mm complete all as specified |
| 60 | S&F in repair Vitreous China wash basin, white, flat back, size 550x400mmexcluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F Vitreous China 550 x 400 mm Size Oval Shaped Wash Hand Basin White with 32mm dia Brass Chromium Plated Waste Fitting, including Cutting Chase cutting in wall and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed, complete all as specified and as directed. |
| 62 | S&F in repair 15 mm bore dia Swan neck Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in repair 15 mm bore dia swan neck WHB Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete and fixed all as specified and directed by Engr-in-Charge. |
| 64 | S&F in repair 32 mm bore chromium plated bottle trap for wash hand basin with inlet & outlet screwed for iron pipes or connection including necessary packing , union and cap complete all as specified and as directed by Engineer-in-Charge. |
| 65 | S&F PTMT waste pipe 31/32 mm bore 80 cm long complete all as specified by Engineer-in -Charge . |
| 66 | S&F in repair Stainless steel Towel Rail 600 mm Long and 20 mm dia, as Approved, fixed including Taking down un serviceable Towel Rail of any description, complete as all specified and directed by Engr-in-Charge. |
| 67 | S&F accessibility fuxtures for specially abled and handicaped children including installation of stainless steel grab bars, support rauls near WC and washbasin, accessiabe leave type faucets, and adjustable mirrors. All items shall confirm to universal design standards and be fixed securely to ensure user safety duranility, and ease of access. and ease of access including all fittings complete all as didrected by Engr-in-Charge. |
| 68 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.50 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed by Engr-in-charge. |
| 69 | S&F EURONICS Plastic 300ML Liquid Soap Dispensar for bath room & offices/wall mounted Ea51, white or other colour copmlete all as speciied and direced by Engr -in-Charge. |
| 70 | S&F in repair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F grating round /circular with waste hole or without waste hole of dia 75mm/ 100mmsize of PTMT complete all as specified and as directed by the Engineer in Charge. |
| 72 | S&Fas in repair over headshower150 mm dia/ 120 mm square size, Stainless steelfancy type,with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in repair, 6 mm thick glass corner shelf (12\"x12\")with C type Brass CPbracket, complete all as specified and directed by Engr-in-charge. |
| 74 | S&F in repair, 6mm thick Glass shelf (6 x 22 \") with Brass CP Bracket , brass nut, SS railing complete all as specified and directed by Engr in charge. |
| 75 | S & F Looking Mirror selected quality of size 900 mm x 600 mm x 6 mm thick, having four holes on corners fixed to walls with CP Brass screws with fancy type head top complete all as specified and directed by Engr-in-Charge. |
| 76 | Dismantling of old existing PVC/CI/concrete pipes of any description, jointed in cement mortarup to 100 mm dia and removing to store. |
| 77 | S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls/floor with oval access door with clamps complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F 100mm dia CI bends, diminishing pieces or tapers, complete all as specified and directed by Engr-in-charge. |
| 79 | S&F 100 mm dia CI Sockets (double) collars, complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F 100mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door, complete all as specified and directed by Engr-in-Charge. |
| 81 | S&F 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls with clamps complete all as specified and directed by Engr-in-Charge. |
| 82 | S&F 75mm dia CI bends with oval access door, diminishing pieces or tapers, complete all as specified and directed by Engr-in-charge. |
| 83 | S&F 75 mm dia CISockets (double) collars, complete all as specified and directed by Engr-in-charge. |
| 84 | S&F 75mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door, complete all as specified and directed by Engr-in-charge. |
| 85 | S&F in repair PVC ( SWR) rain water pipe 110 mm bore single socketed in any length with rubber ring joints fixed to walls/ floor complete as specified including flat iron clamps 25x3mm complete all as specified including taking out old damaged PVC rain water pipes, complete all as specified and directed by Engr-in-charge. |
| 86 | All as per item No.84 but for 75 mm bore. |
| 87 | S&F PVC (SWR) bends of any radius for 110 mm bore complete all as specified and directed. |
| 88 | S&F PVC (SWR) Junction Single(Single T)for 110 mm bore equal or unequal complete all as specified and directed. |
| 89 | S&F PVC (SWR) bends of any radius for 75 mm bore complete all as specified and directed. |
| 90 | M&L in repair PVC (SWR) floor trap trap/Nahani Trap ,plain with grating including jointing to waste pipe with solvent cement dia of outlet 75mm in repairs, complete all as specified and directed by Engr-in-charge. |
| 91 | PVC in repair (SWR) gully trap 125/110 mm,setting and jointing with solvent cement, complete all as specified and directed by Engr-in-charge. |
| 92 | S&F stainlessSteel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of Mild Steel Wire Stapes, etc, complete all as specified and as directed by Engr-in-charge. |
| 93 | Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as specified and as directed by Engineer-in-Charge. |
| 94 | S&F 4.00 mm thick figure glass, in square n exc 0.5 sq m each pane over solar control film 25 microne reflective type sticked to glass panes as per instruction manufactures fixed to aluminium frame with rubber gasket or fixed with glass putty as required etc completed all as specified and as directed by Engr-in-charge. |
| 95 | Dismantling structural steel work incl. steel door, gate, window guard bars, grills etc. complete all as specified and as directed by Engr-in-Charge. |
| 96 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge |
| 97 | Demolition of Cement Concrete reinforcement roof, floor (Other than ground floors), beams , staircase, landing, chajjas and similar suspended works etc., complete all as specified and directed by Engr-in-Charge. |
| 98 | M&L for RCC (Nominal mix) type B1, 1:1 1/2:3 (20 mm graded aggregated) asin slab supported walls, beams and columns in floors, roof, landing, balconies,chajjas, conopies, cooping deck slab and selves and the like, complete all as specified and directed by Engr-in-Charge. |
| 99 | M&L Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs etc,complete all specified and directed by Engr-in-Charge. |
| 100 | M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 101 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite over 15 mm thick screed bed in CM 1:4 including grinding, moulding rounnding and polishingbedding as in, window Cill, kichen self plateform etccomplete all as specified and directed by Engr-in-Charge. |
| 102 | Removing demolished building material includingloading,unloading and stacking at the destination,distance more than 5 km and less than 10 km as per NGT norms complete all as specified and as directed by Engr-in-Charge.Note:-(a) The quoted rate shall be inclusive of carrying out work upto 15m height of building. (b)Water is not supplied by the MES. Water will be arranged by contractor and contractor should produced all necessary Test Certificates for portable water fit for construction and rehabilation as per relevant IS. Rate of Water tankerand rate of water testing are inclusive in quoted rate.(c) All debris will be removed from MoD land as per NGT Norms.(d) The contractor should make good of any damaged and disturbed surface and clean all cement/guniting etc patch on windows/doors/and all surface. |
| 103 | Surface dressing not exceeding 15 cm deep in soft soil, complete in all respect as specified and directed by Engr-in-Charge. |
| 104 | Excavation over areas in soft/loose soil n exc 1.5m depth and getting out complete all as specified and directed. |
| 105 | Excavation over areas in soft/loose soil exc 1.5m and n.exc 3.0m depth and getting out complete all as specified and directed. |
| 106 | Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation, shaft, manholes, etc. not exc. 10 sqm on plan and getting out in soft/ loose soil complete in all respect as specified and directed. |
| 107 | Returning, filling in, including spreading, levelling, watering and well ramming (RFR) in layers not exc 25 cm, complete in all respect as specified and directed. |
| 108 | Removal of excavated soil to a distanceexc 1.5 KM and not exc 5.00 KM incl loading, unloading and stacking etc in all respect as specified and directed |
| 109 | M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete in all respect as specified and directed by Engr-in-Charge. |
| 110 | M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete in all respect as specified and directed by Engr-in-Charge. |
| 111 | M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete in all respect as specified and directed by Engr-in-Charge. |
| 112 | M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete in all respect as specified and directed by Engr-in-Charge. |
| 113 | M&L for PCC type D-2, 1:4:8 (using 40 mm nominal size crushed and graded stone aggregate) in foundations, filling and mass concret, complete in all respect as specified and directed. |
| 114 | M&L for RCC nominal mix Type B-1 , 1:1.5:3 (20 mm graded aggregates)in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.; basement slabs under-reamed piles and mass concrete, complete and all as specified and as directed by Engr-in charge |
| 115 | M&L for RCC M-25 (20 mm grades aggreages) design mix in columns, pillars, piers, psts and struts, complete in all respect as specifified and directed. |
| 116 | M&L for RCCnominal mix Type B-1 , 1:1.5:3(20 mm grades aggreages) in beams, cantilevers, bressummers, lintels over 1.5 m span, complete in all respect as specifified and directed. |
| 117 | M&L for RCCnominal mix Type B-1 , 1:1.5:3(20 mm grades aggreages)in chajjas, complete in all respect as specifified and directed. |
| 118 | M & L forformwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished flat surface of concrete complete in all respect as specifified and directed. |
| 119 | M & L forformwork to sides of pillars, posts, struts, piers,columns and stanchionsin rough finished flat surface of concrete complete in all respect as specifified and directed. |
| 120 | M & L forformwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. in rough finished flat surface of concrete complete in all respect as specifified and directed. |
| 121 | M&L for formwork to chullah hoods, chajjas, troghs and similar items including edges in rough finished flat surfaces of concrete, complete all as specified and directed by Engr-in-Charge. |
| 122 | M&L for deformed TMT steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete in all respect as specified and directed. |
| 123 | S&F exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping, of grid size 600 x 600 mm comprising of wall/ cleat angle of size 25x25x0.35 mm and corss tee of size 24x38x0.70 mm with 4 mm dia GI wire as suspender and including 4 mm thick decorative pre-painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/ wooden truss of any type, complete in all respect as specified and directed by Engr-in-charge. (Make:- Eternit, Everest or equivalent) |
| 124 | M&L for 40 mm thick damp proof course (DPC) to horizontal or vertical surfaces including necessary formwork using cement concrete type B-0, 1:2:4 (using 12.5 mm nominal size crushed and graded stone aggregate) mixed with water proofing compound complete in all respect as specified and directed. (Water proofing compound shall be measured & paid separately under supply only item). |
| 125 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete in all respect as specified and directed by Engr-in-charge. |
| 126 | M&L for broken stone or boulders hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface. |
| 127 | M&L for 25 mm thick PCC 1:2:4Type B-1 (20 mm Graded Stone Aggregate) as in sub floor etc., including rough top surface to receive floor finish, complete all as specified and as directed. |
| 128 | M&L for 75 mm thick PCC 1:4:8Type D-2 (40 mm Graded Stone Aggregate) as in floor etc., including rough top surface to receive tiles finish, complete all as specified and as directed. |
| 129 | M&L for skid/ non skid ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed by Engr-in-charge. |
| 130 | M&L for 75 mm thick PCC, type C-2, 1:3:6 (using 40 mm crushed and graded stone aggregate) as in plinth protection and finished surface even and smooth without using extra cement complete in all respect as specified and directed. |
| 131 | M&L for preparation of plastered or unplastered decorated surfaces on ceilings by vaccum based standing machine all as specified, removal of nails etc and filling cracks/ hole by applying wall care putty (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coat oil bound distemper white or colured by auto roller, complete in all respect as specified and directed by Engr-in-Charge. |
| 132 | S&F three layered white in colour rotational moulded made out from LLDPE material water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) including three tank nipples of 20 mm nominal bore dia hoisted and fixed in position, all as pspecified in SSR part I, complete in all respect as specified and directed. |
| 133 | S&F 20 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. |
| 134 | S&F Vitreous China Wash Hand Basin 630X450mm in size, White (bowl Type) with 32mm dia Brass Chromium Plated Waste Fitting,UPVC/CP Bottle trap long, Chromium plated swan neck basin mixer, UPVC’ 32mm bore Waste Pipe, and fixed on granite top surface with necessary cement mortar 1:3 and making good disturbed surfaces with white cement and fixed, complete all as specified and as directed. |
| 135 | M&L for replacement of 100 mm CI floor/ nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and directed by Engr-in-Charge |
| 136 | S&F in repair PVC (SWR) Pipes 75mm in Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls/Floors, etc, complete all as specified and as directed. |
| 137 | S&F 75 mm dia PVC (SWR) Tee with access door suitable for PVC (SWR) Pipes 75mm in Bore (dia), jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 138 | S&F 110 mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/in floors/ walls, complete in all respect as specified and directed. |
| 139 | M&L for 100 mm bore pipe for concret bed in PCC 1:4:8, type D2, using 40 mm nominal size crushed and grades stone aggregate to drain pipes incluidng pack,ing under and completely surrounidng pipes with concrete after they are laid and testeed in complete in all respect as specified and directed. |
| 140 | S&F PVC (SWR) 110 mm internal bore cowl, complete in all respect as specified and directed. |
| 141 | S&F stack clamp made out of GI angle and 10mm dia U bolt and nut with washer for 75 and 100 mm dia pipe |
| 142 | M&L for 100 mm thick PCC, type D-2, 1:4:8 (using 40 mm crushed and graded stone aggregate) as in footpath, floor finished even and fair without using extra cement and making impressions of expanded metal whilst the concrete is green, complete in all respect as specified and directed. |
| 143 | M&L for Chequered Cement Concrete Tiles 30 cm x 30 Cm x 25 mm thick pre-printed coloured, Set and Jointed in Neat Cement Slurry with Grey Cement and Pigment over and including 15mm thick Screed Bed in CM (1:4) as in Path, complete all as specified and directed by Engr-in-Charge. |
| 144 | S&F aluminium anodized duco grill DG 208 design as per approved pattern including aluminium U Channel etc complete all as specified and directed by Engr-in-Charge. |
| 145 | S&F in repairVitreous China Soap Dish, Single, as Approved, fixing with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish of any description, complete as all specified and directed. |
| 146 | S&F corner glass shelf of 300 mm long fixed on the wall with nuts & washers, complete all as specified and directed by Engr-in-charge. |
| 147 | S&F glass shelf 450 mm long on wall with screws and making good surface of wall, complete all as specified and directed by Engr-in-charge. |
| 148 | S&F aluminium floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber shoe with over all length of cover plate 140mm complete all as specified and directed by Engr-in-Charge. |
| 149 | S&F aluminium alloy door seal of size 1 metre long fixed to wooden doors complete all as specified and directed by Engr-in-Charge. |
| 150 | S&F aluminium die cast of door closer hydraulically regulated designed No 3 universal type suitable for door shutter size of 850 mm to 1000 mm in width weight between from 61 to 80 kg and fixed, complete all as specified and directed by Engr-in-Charge. |
| 151 | S&F continious (piano) hinges, MS bright finish or electro galvanised 30 mm width of flaps(when open), complete all as specified and directed by Engr-in-charge. |
| 152 | S&F prelaminated particle board of 18/ 19mm thick exterior grade both sides with decorativeface with veneer on both sides using cub bords finished with fixed with screws to timber frame, complete all as specified and directed by Engr-in-Charge. |
| 153 | S&F brass drawer handles fancy type projection drop (50mm to 65mm) on screwed plate, complete all as spd and directed by Engineer in Charge. |
| 154 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats, holdfast, bolted or welded attachment etc. using FE-410W (Grade E-250 quality \"A\") complete all as specified and directed. |
| 155 | S & F plates (plain or chequered) channels, square cutor notched (ordinary and counter sunk) forming holes, without any attachmentwith riveted, bolted or welded attachment using Fe-410W (Grade E-250 quality \"A\") complete in all respect as specified and directed. |
| 156 | M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth all as specified and as directed by Engineer-in-charge. |
| 157 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc, complete all as specified and directed by Engr-in-Charge. |
| 158 | M&L for along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc, complete all as specified and directed by Engr-in-Charge. |
| 159 | M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors. |
| 160 | M&L for 40 mm thick PCC type B-1, 1:2:4 in floor (using 20 mm crushed and grades stone aggregate) finished fair and even complete in all respect as specified and directed. |
| 161 | M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new plastered surface complete all as specified and as directed by Engineer-in-charge. (Note:-including necessary scaffolding upto 4th Storey) |
| 162 | S&F vanishing roller/ vertical blinds as required for windows/ door/ ventilator of any colour and pattern with exc 1.5 sqm but not exc 4.50 sqm each, as approved by Engr-in-Charge including connected items i.e. rod, hooks etc with complete fittings, complete all as specified and directed. |
| 163 | Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed. |
| 164 | Taking down carefully by unscrewing from theboards/outlets boxes fittings and fixturessuch as switches, sockets ceiling, rose, lamp holders, tube light fittings, regulators etc and making good of disturbedsurfaces |
| 165 | Taking down of LED T/L/Ceilling light/Round light/Bulkhed light of any type and capacity complete all as specified and as directed. |
| 166 | Taking down of old unserviceable Exhaust fans/wall fan of any capacity and deposited to MES store yard the same for repair/ condemnation . |
| 167 | Material and labour in replacementfor point wiring (concealed) in and including rigid non metallic PVC heavy duty conduit, 19/20 mm dia/suitable size as per site reqmt including cutting chases for conduits, sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable in and including flush type metal boxes modular type suitable for fixing modular switches, sockets, fan regulators etc with brass screw, cup washer and including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as earth wire connected to common earth and earth dolly as per IS specification and as specified for the One light/fan/bell point controlled by one switch. |
| 168 | All as per item No. 166.01here-in-before, but for exhaust fan point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm. complete all as specified and directed. |
| 169 | All as per item166.01 here-in-before but for 3 pin socket outlet, 5 Amp on the same board with other switches, complete all as specified and directed. |
| 170 | All as per item166.01 here-in-before, but for 3 pin 5 amp switch socket combination on independent board with other switch complete all as specified and directed. |
| 171 | All as per item166.01 here-in-before but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on independent board and provision of 1.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. . |
| 172 | M&L for concealed sub main wiring three run of 06 sqmm PVC insulated unsheathed copper conductor cable ISI marked 1100 volts grade drawn in and including PVC surface conduit suitable size of medium grade fixed on wall/ceiling/passing through wall etc connected as required at site complete all as directed.Note- (a)Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit). (b)Make disturbed surface good to wall/floors as existing surface. |
| 173 | Taking down u/s light fitting any type and Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.or equivalent in Philips/ Crompton asapproved by GE. |
| 174 | M&Lmodular switch, single pole, one way 6 Amp , 240 volts 1 module ISI marked,Make Anchor/ Havells/Cona/ Leader |
| 175 | M&Lmodular switch, single pole, one way 16 Amp , 240 volts 1 module ISI marked,Make Anchor/ Havells/Cona/ Leader |
| 176 | Supply and fixing,Polycarbonate ceiling rose, surface type, 3 terminal, 240 , ISI marked,Make Anchor/Havells/ Cona/ Leader (white colur) |
| 177 | S&Fmodular socket, single pole, one way, 2/3 pin 6 Amp 240 volts 2 module ISI marked,Make Anchor/ Havells/Cona/ Leader |
| 178 | S&Fmodular socket, single pole, one way, 2/3 pin 6/16 Amp combined 240 volts 2 module ISI marked,Make Anchor/ Havells/Cona/ Leader |
| 179 | S&Fmodular cover plate with frame 3 module ISI marked,Make Anchor/ Havells/Cona/ Leader |
| 180 | S&Fmodular cover plate with frame 4 module ISI marked,Make Anchor/ Havells/Cona/ Leader |
| 181 | S&Fmodular cover plate with frame 6 module ISI marked,Make Anchor/ Havells/Cona/ Leader |
| 182 | S&Fmodular cover plate with frame 8 module ISI marked,Make Anchor/ Havells/Cona/ Leader |
| 183 | S&Fmodular metal flus box 3 module ISI marked,Make Anchor/ Havells/Cona/ Leader |
| 184 | S&Fmodular metal flus box 4 module ISI marked,Make Anchor/ Havells/Cona/ Leader |
| 185 | S&Fmodular metal flus box 6 module ISI marked,Make Anchor/ Havells/Cona/ Leader |
| 186 | S & FMCB SP 6 to 32 amps 10 KA ,c-series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge. Make- Legrand/ L&T/C&S |
| 187 | Supply and Fix, wall fan,rating 240 V, 50 Hz, Single Phase, 300 mm sweep with all accessories, all as per Model “D’zire HS” of Make ‘Havells’ or equivalent Model of Make ‘Usha’/ ’Crompton Greaves’/ ’Almonard’, and connecting up from socket outlet to fan complete all as specified and directed. |
| 188 | S&F steped type electronic fan regulator flush type on the existing phenolic laminated sheet etc |
| 189 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from celling rose complete. |
| 190 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holider and LED lamp |
| 191 | Supply and fix LED building security lights fitting 35 watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified. |
| 192 | S&F exhaust fan 450 mm sweep compete with louvers including all civil work like cutting and making circular opening in existing wall of kitchen etc ,including including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make:CG. |
| 193 | M&L Earthing complete with galvanised steel earth plate electrode 50×60cm.x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25x4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed. |
| 194 | Supply and fox factory made epoxy polyster powder coated distribution board SPN DB way fabricated from minimum 1.5 mm thick CRCA Each sheet with double door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable lies for cable management, suitable for one incoming and 5 outgoings complute all as specified and confirming to 15: 8623 (Make: Legrand/Siemens) Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the OB including making good the disturbed surface is deemed to be included in quoted rate |
| 195 | S&F Single pole and neutral enclosure with a two pin and earth including plug and socket complete set with one single pole MCB of 20 Amp, complete all as specified. |
| 196 | 5 & F MCB SPN of rating 40 Amp. 240 Voit, 10 KA, \"C\" series type complete all as specified and as directed. |
| 197 | &F in MCB SP 40 Amp Glemens Schneider Amps, 10 KA 230 Volts 50 HZ complete all as specified and as directed by Engineer-in-charge. |
| 198 | MAL for hole cutting on wall for 250mm exhaust fan including PCC 1:2:4 complete all as specified and as directed. |
| 199 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz. RPM 1200, Each Copper winding of sweep 250mm complete all as specified and as directed |
| 200 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 201 | S&F 20 mm rigid PVC non mettallic conduit including junction boxes, tees, bends, elbow reducers, bell mouth tube ends including all accesssories such as couplers, lock nuts, saddle etc all as specified and directed. |
| 202 | S&F Air Circulator fan 230 volts, single phase, oscilating 450mm sweep suitable for wall mounting complete all as specified and as directed by Engr-in-charge. |
| 203 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 204 | Supply and Fix 25 mm dia Galvanised Steel water tubing(ISI Marked ) medium grade with and including all tube fittings and fixtures such as GI bends teeunion etc in trenches/fixed to wall/ fixed on pillercomplete and connecting to water supply pipe line and testing complete all as and as directed. |
| 205 | M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed. Note :-Thickness of sand cushioning shall be measured after punning. |
| 206 | M&L for brick protection with sub class \"B\" Designation 75 old bricks laid dry flat 23cm in width over sand cushioning in trenches as perpendicular to the direction of underground cable complete all as specified and as directed. |
| 207 | Supply and fixingin replacement of GI tubing, light grade, 40mm bore with all fitting laid in trenches / pole / wall for protection of cables in repairs complete all as specified and directed. |
| 208 | Supply , Laying , testing and commissioning XLPE insulated and PVC Sheathed , galvanized steel strip or wire armoured , heavy duty electric cable with multi stranded aluminium conductor, 1100 volts grade of size 16 sqmm 4 core complete all as specified & directed by Engineer - In - Charge. |
| 209 | S & F25 mm dia Gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 210 | M & L for cutting/threading of GI tubing in position of size 100/80 mm dia pipe for insertion of new Tees, branches etc. of 25 mm dia bore dia all as directed. |
| 211 | Note:- The amount of Rs 36902/- against Schedule of Crediton Srl Page 158 to 159 shall be deducted from the total amount quoted against Sch \"A\" |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
