|
| 1 | Taking down of chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed |
| 2 | Ditto all as per item No 1.00 above but area exc 1.50 Sqm but n-exc 4.0 Sqm each |
| 3 | Taking down of sutters of any description exc 1.0 sqm but n-exc 2 Sqm each |
| 4 | S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm mild steel sheets complete all as specified and directed |
| 5 | Material and labour for PCC 1:3:6 type C-1 (20mm graded agg) filling in pressed door chowkat/hold fast blocks complete all as specified and directed |
| 6 | M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 7 | Supply and fixing plain framed panelled shutter 35mm thick of 2nd class hardtwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatsist ,complete all as specified |
| 8 | Supply and fixing aluminium anodised barrel tower bolts of extruded section and fixed of 200mm long complete all as specified and directed by Engr-in-charge. |
| 9 | Supply and fixing aluminium alloy anodised sliding door bolt 300mm long with haps staple bolt type and fixing clips of sheet etc complete all as specified and directed by Engr-in-charge. |
| 10 | Supply and fixing 150mm long aluminium handles cast type anodized complete all as specified and directed by Engr-in-charge. |
| 11 | M&L for powder coated aluminium anodised window slidingtype (2 x glass & 1 x wiremesh shutter) with and including 3 to 4 mm thick glass as approved, stainless steel wiremesh fixing with necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable anodised fittings such as, autolock, handles, including anodised aluminium frame, with one or more rebates and all necessary related items complete, all as specified & directed by Engr-in-charge. |
| 12 | Supply and fixing powder coated aluminium ventilator, openable type, made out of hollow extruded aluminium sections, as approved and fixed with and including 5 to 6mm thick tinted/froasted/black glass with glazing clips rubber beading / gasket, anodised aluminium beading screws, S/S wiremesh, locking systeme, handles, etc complete all as specified and directed by Engr-in-charge. |
| 13 | Framed work such as grills, gratings, etc.. with ends of bars, shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk, ways; railings; framework of, water tanks and similar work, conforming to Fe.290.Gde-E-165 |
| 14 | Supply and fixing for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge. |
| 15 | S&F, Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 16 | Supply and fixing for 100mm long but hinges heavy duty cold rolled mild steel medium weight complete all as specified and directed by Engr-in-charge. |
| 17 | S&F anodised aluminium door shutters, with and including anodised aluminium frame with one or more rebates, both with aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as aluminium handle 2 No\"s in each door, hinges, and including 5 to 6 mm thick glass (black) and aluminium grill(where ever required) fixed to frame, completeallasspecified & directed. |
| 18 | M&L, 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 19 | Ditto all as per inet No 18 above but in repair |
| 20 | Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame |
| 21 | Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane incl one coat of synthetic enamel paint to oil putty complete all as specified & directed. |
| 22 | Supply & fix in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed. |
| 23 | Resecuring or easying and adjusting without taking down shutters of any description(door/window) exe 1 sq.m but n exe 2.0 sqmeach |
| 24 | Resecuring or easying and adjusting without taking down shutters of any description(door/window) not exe 1.0sqmeach |
| 25 | Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm |
| 26 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 27 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 28 | S&F, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa of approved pattern/design as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 29 | Ditto all as per Item No 28 above but fixing only sheets obtained from dismantling |
| 30 | S&F, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 31 | S&F 50mm thick Puff insulated, colour coated, pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick on both sides of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 32 | Dismantling of framed timber scantlings 40 sq. cm and over in section, in any position |
| 33 | Dismantling structural steel work including doors, gates but excluding framed truss etc |
| 34 | S&F rolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W Gde E-250quality A complete all as specified and directed. |
| 35 | M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and includinga coat of pink primer (by spraying) all as specified & directed |
| 36 | Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new or previously untreated steel surfaces of any description incl preparation of surface over 10cm widthor girth complete all as specified and directed by Engr-in-charge. |
| 37 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or belowGL) complete all as specified |
| 38 | M&L cement concrete 1:5:10 type E-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed. |
| 39 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 40 | Supply and fixing in repair 20 mm dia stianless steel, 1mm thick curtain rods with and including fancy type stianless steel funnel, holding bracket with suitable screws etc, complete all as specified and directed by Engr-in-charge. |
| 41 | S&F in repairsbib taps, cast copper alloy , fancy type, chromium plated, long bodywith crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 42 | S&F in repairs pillar taps, cast copper alloy, with capston heads, fancytype chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 43 | M&L 15mm bore, senser based, touchless (automatic type), pillar tap, cast copper alloy, with capston heads, fancytype chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make, Jaquar/Hindware or equivalent |
| 44 | S&F in repairangular stop cockwith wall flange, cast copper alloy , fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed both ends for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 45 | S&F, fully automatic, touchless, wall mounted, stianless steel urinal flusher with sensor with and including supply and fixing of all connected items, complete all as specified and directed. Make, Jaquar/Hindware or equivalent |
| 46 | S&F in repairfor 600x450mm bevelled edge looking mirror of selected quality glass 4 mm thick mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 47 | Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed by Engineer-in-Charge. Make : Syme/ Prayag |
| 48 | Description all as per item No 47.00 here-in-before but length 600mm. |
| 49 | S&F in repair tubular towel rail , brass, chromium plated, fancy type,min 60 cm long between flanges fixed with and including CP brass screws, rawl plug etccomplete all as specified and directed |
| 50 | S&F in repair soap dish/plate , 3mm thick stainess steel of size 300 x 100mm, fancy type , with impression/mould for soap, paste etc alongwith adequet perforations, holes for tooth brush fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. |
| 51 | Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed by Engr-in-charge.Make : Hindware/Paryyware /Prayag /Polytuff |
| 52 | S&F in repairs vitreous china squatting pan \" Orissa pattern\" size 580 x 440 mm, white withintegral foot rest (excluding flushing cistern and flush pipe) with cast iron \" P \" trap and including connecting totrap and flushing pipe, anti syphonage pipe etc complete & including making good to floor complete all as specified and directed. |
| 53 | Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including plastic water closet seat white/black, connection to out going pipe and flushing pipe complete all as specified and directed by Engineer-in-Charge.Make : Parry ware/Hind ware/CERA |
| 54 | Supply and fixing in repair vitreous china wash down water closet pan single piece in white shade of size 365x675x740mm, with andincluding PP soft close slim seat cover,hinges ,dual flush cistern fitting,fixing of S trap 220 mm,and accessories setincluding necessaryfixing arrangement as per manufactures instruction complete all as specified and directed. Cat Part No :- ECS-WHT-851S220SPPSM of Brand: ESSCO (Jaqar & Co.Pvt Ltd) or equivalent brand ofmake as specified in Appx. |
| 55 | S&F in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F in repairvitreous china wash hand basin (flat back) of size 580x450mm excluding taps, waste,chain and plug and porcelain stopper but including one number waste fittings, 32 mm dia, brass, chromium platedwith long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe 610 mm long with connector,with and including MS brackets and cutting for and pinning in ends of brackets completeall as specified and directed. |
| 57 | Ditto all as per item No 56.00 above but oval type, fixing with granite platform, complete all as specified and directed |
| 58 | S&F in repair Sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one chromium plated suitable waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm longcomplete all as specified and directed. |
| 59 | Taking down steel tubing and connections incl cleaning for refixing or removal from site for 15 mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 60 | Description all as per item No 59.00 here-in-before but for 20 mm bore pipe |
| 61 | Supply and fixing 15 mm bore tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed by Engineer-in-Charge.Make : JINDAL/PRAKASH/TATA |
| 62 | Description all as per item No 61.00 here-in-before but for 20 mm dia |
| 63 | Refixing only 15 mm bore tubes, any grade, to walls and ceilings or laying in floors |
| 64 | Description all as per item No 63.00 here-in-before but for 20 mm dia |
| 65 | Supply and fixedin repair vitreous china urinal, Half stall type,white including grating and union for discharge pipe,waste pipe andchromium plated spreader 15mm bore fixed to senser based automatic flusher system, including fixing plugs beading urinal against wall in CM 1:2, securing urinal to plugs with brass screws 60 mm long, pointing around urinal in white cement specified and directed. |
| 66 | Description all as per item No 65.00 here-in-before but re-fixing only |
| 67 | S&F in repairs PVC waste pipe of 32 mm bore of suitable length for WHB/urinal/sink complete all as specified and directed. |
| 68 | S&F in repair, Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 69 | S&F in repair transparent 6.30mm thick glass corner shelf of size 250mm radius, complete with CP grill, bracings/brackets and screws etc. |
| 70 | S&F in repair health faucet ABS body, fancy type with wall hook and one meter stainless steel braided rubber hose pipe suitable and screwed for 15 mm bore GI pipe including necessary fixing arrangement as per manufactures instructions complete all as specified and directed. |
| 71 | S&F in repair grating 100/125 mm dia of ,steel chromium plated with or without hole as required complete all as specified and directed. |
| 72 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 73 | M&L for non skidcoloured Ceramic tiles,first quality( of approved class , colourand design/ shade )7 to 8 mm thick (Square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floorsurfaceetc set and jointed in neatcement slurry and pointed in coloured cement to match with shade ofcoloured tiles over and including 15 mm thickscreed bed in Cement mortar 1: 6 Complete all as specified and directed. |
| 74 | M&L forvitrefied coloured Ceramic tiles,first quality( of approved class ,light Shade, double charged ), 8 to 10 mm thick (Square/ rectangular),polished, area of each tilesnot exceeding 0.36 sqm,,as in floorsurfaceetc set and jointed in neatcement slurry and pointed in coloured cement to match with shade ofcoloured tiles over and including 15 mm thickscreed bed in Cement mortar 1: 6 Complete all as specified and directed. |
| 75 | M&L forvitrefied coloured Ceramic tiles,first quality( of approved class ,dark Shade), 10 mm thick (Square/ rectangular),polished, area of each tilesnot exceeding 0.36 sqm,,(cutin required size), fixed on vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of colouredtiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tilescomplete all as specified and directed. |
| 76 | M&L for glazed coloured ceramic tiles,first quality ( of approved class , colourand design/ shade ) of size 450 x 300 x 7 to 8 mm thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of colouredtiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tilescomplete all as specified and directed. |
| 77 | M&L forgranite stone black machine cut 18 to 20 mm thickfixed on any surface ie steps, jambs,pillarwindow cills, cooking platform and the like etc setin cement mortar 1:4 and pointed with white cement (1:2) using marble dust and admixture of pigment to match with shade of stoneincluding grinding, rubbing and polishing mirror finish and half rounding of the exposed faces of stone , with and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 78 | S&F stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed Make : Bluestar/ Nirali/ Pearl. |
| 79 | M&L 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregates as in plinth protection finishing cement concrete even and smooth without using extra cement complete all as specified and directed. |
| 80 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed. |
| 81 | Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and evenas in wallcomplete all as specified and directed. |
| 82 | Material and labour for rendering 15 mm thick using ready mix plaster bags on brick work or concrete surfaces, finished surface even and smooth as in wall complete all as specified and directed. |
| 83 | M&L Rendering 5 mm thick in cement mortar (1:3), on fair faces of concrete surfaces, finished even and smooth, over and including fixing of chicken wiremesh with nails and set with cement slurry and paste before plastering on ceiling complete all as specified & directed. |
| 84 | M&L for preparing new plastered or un-plastered surfaces and applying ofwall care putty 1.5 to 2mm thick on existingprepared surface for smooth finishing and applying two coats of oil emulsion distemper over a coat of suitable primering as a base coat as per manufacturer\"s instructions, complete all as specified and directed. |
| 85 | M&L for preparing new plastered or un-plastered surfaces and applying 1.5 to 2mm thick exterior grade wall care putty on existingprepared surface for smooth finishing and applyingtwo coats of weather proof exterior emulsion paint silicon based over a coat of water based suitable primering as a base coat as per manufacturer\"s instructions with using roller complete all as specified and directed. |
| 86 | Complete removal of existing treatment on wall/ceiling/roof projections including chajja, facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc and applying 1.5 mm to 2 mm thick wall care putty making smooth surface by skilled labour complete all as specified and directed. |
| 87 | M&L for applying two coat of oil emulsion distemper(OBD) (on plastered or unplastered surface) using roller on old surfaces, complete all as specified and directed. |
| 88 | Preparation of plastered/unplastered surfaces and applying two coats of premium acrylic emulsion paint exterior weather coat, complete all as specified and directed. |
| 89 | Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed |
| 90 | M&L Brick work with sub class \"B\" bricks, old size straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed |
| 91 | M&L for brick work (except bricks), old size straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.NOTE:- Old bricks retrived under item No. 95 here in above shall be reused. |
| 92 | M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 93 | S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints including jointed with approved adhesive and fixed to wall/ under floor with suitable clamps complete all as specified and directed. |
| 94 | S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints including jointed with approved adhesive and fixed to wall/ under floor with suitable clamps complete all as specified and directed. |
| 95 | S&F in repair PVC (SWR) bend 75 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed. |
| 96 | S&F in repair PVC (SWR) branch piece,75 mm bore, single (single Y) equal or unequaland jointed with approved adhesive complete all as specified & directed. |
| 97 | S&F in repair PVC (SWR) bend 110 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed. |
| 98 | S&F in repair PVC (SWR) branch piece,110 mm bore, single (single Y) equal or unequaland jointed with approved adhesive complete all as specified & directed. |
| 99 | Supply & fix in repairPVC (SWR) vent cowl 110 mm bore, and jointed with approved adhesive complete all as specified & directed. |
| 100 | M&L, 75mm dia, PVC (SWR) multi floor trap, with grating including jointing with solvent cement, complete all as specified & directed. |
| 101 | M&L, PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement, complete all as specified & directed. |
| 102 | Disconnecting & taking down existing water tank any type and S&F rotational moulded polyethylene water storage tanks 500 liter capacity (cylindrical verticalwith closed top) with and including PVC ball valves, high pressure with polythene float and fly nut complete screwed for 20 mm bore iron pipeor for brass ferrule, hoisted and fixed in positionall as specified in SSR Part I 2009complete all as specified & directed. |
| 103 | All as per item no 102but water storage tanks 1000 liter capacity complete all as specified and directed. |
| 104 | S&F in repair ball brass valveshigh pressure with polythene float and fly nut complete screwed for iron pipe 20 mm diaor for brass ferrule complete all as specified and directed. |
| 105 | M&L for dismantling/taking down old dilaped/broken RCC chajja, facia, dropwall, roof projection, shelf/rack etc and repairing/re-casting of the same with reinforced cement concrete type B1,1:2:4(20mm graded stone aggregate), including necessary formwork, scaffolding and TMT steel reinforcement if required, upto four storeys and making surface smooth and finish with PCC type B0, 1:2:4(using 12.5mm graded aggregate) as in fillet, rendering 5mm thick in cm 1:3 on soffit with drip course and 10mm thick rendering in cm 1:4 for concrete surface with WPC after strucking off formwork, area not exc 2.0 Sqm each, including removal of deberies from the site and disposed out side the the MD land, complete all as specified and directed.Note- Steel reinforcement whenever used will be measured and paid separately under respective items) |
| 106 | M&L for cutting and completely removing of bushes, small trees, vegetation (Peepal, small plants etc) growth alongwith its roots on building wall/roof/chhajja/parapet wall/water tank staging area etc or like of any dia and girth at any height by necessary demolition of brick, concrete, plaster portion if required and filling holes onand making good disturbed surfaces to match with existing surface with cement mortar 1:4 with and including WPC and PCC 1:2:4 as per site requirement, complete all as specified and directed. |
| 107 | Material & labour for sunken slab treatment comprising ofthe following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work putside of defence land.(b) Material & labour for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat overPCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thickplastering in CM 1:4using water proofing compound (WPC) @ 3% by weight of cement.on wallof sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g)Supply & fix PVC (SWR) floor trap of 75/110mm diaand 32mm dia GI pipe medium grade, 450m long (for draining out the water) all as directed by engineer-in-Charge |
| 108 | S&F for lnsulated PVC hollow Wall/ceiling Lining consisting of PVC Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted to wall/ceiling. PVC Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet of approved quality & design, over and including 3mm dia MS square mesh of approved size, fixed to MS frame work, including dismantling of boarding, any description, fixed in any position with nails/screw complete all as specified and directed. |
| 109 | Supply and fixing for GI snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm GI angles weight 0.36 kg fixed all along the wall at ends and with GI main and cross tee of size 36.50 mm x 25 mm x 1.4 mm weight not less than 0.24 kg per RM including GI cleat bolts nuts and washers and 2mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including fixing suitable for non asbestos fibre cement boards in ceiling including 4 mm thick, non-asbestos ceiling boards as per approved make of size 600 x 600 mm, fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling, with and including Dismantlingof ceiling board of any description, fixed in any position complete all as specified and directed by Engr-in-charge. |
| 110 | Providing and fixing in repair Gypsum Board 12mm thick in ceiling, with and including fixed over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh with screw to flat surface as per manufacturers instructions, including dismantlingof ceiling board of any description, fixed in any position complete all as specified and directed by Engr-in-charge. |
| 111 | Material and labour for cleaning of sewage linesfrom manholes to manhole of any length (Manhole to manhole consider Each Job) for any depth by rodding and well flushing the sewage lines after removing sludge including taking off the manhole covers and refixing after cleaning of manhole of any size and depth. The manhole lines to be cleaned by mechanical sludge trailor and all sludge to be removed a distance of 500m outside of the Cantt area (Note : (a) The contractor shall provide sufficient labours everyday to clear for all types sewage line blockage complaints, (b) The period of completion for each complaints shall be 24 Hours (c) It will be the responsibility of the contractor to get the complaints completed with in stipulated period the labour shall be made available during the office hours for any complaints (d) The payment shall be made to the contractor on the basis of job done on complaints slip for each complaint. No payment shall be done for any incomplete work .The contractor to quote the rates accordingly). |
| 112 | Cleaning/Clearing blokage of WC\"s/traps(any type) upto & incl 1st Manhole etc complete all as spd and directed. |
| 113 | Dewatering of soak well/soak pit including connected septic tank by discharging the sewage water, sludge, solid waste etc into a sealed tanker/truck with pipe system including vehicle and other arrangements and disposing outside cantt area, complete all as directed by Engr-in-Charge.(Note: 4000 Ltr capacity tank shall be measured as one unit) |
| 114 | Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as spd & directed. |
| 115 | M & L PCC (1:2:4) Type B-1 using (20mm graded stone aggregate) as in precast cover slabs for man holes/Soakage Well/Septic Tank, lintels and like, set in cement mortar 1:4, with and including necessary form work, placing in desired position, complete all as specified and directed. |
| 116 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 117 | M&L for RCC NP3 150mm diameter pipes laid on 150mm thick concrete bed with and including excavation in any type of soil, RFR, removing of surplus soil,including construction of manholes/drop manhole of standard size as directed, made of Brick masonry, 15mm thick rendering in cm 1:4 and covered with RCC covers, including all related items and activities,to execute and make sewer line functional, complete all as spd & directed. |
| 118 | Labour only, desilting, completely removing of vegitation growth, cleaning of surfacecs, etc of existing drain of any section, and thrown away out of defence land, complete all as spd & directed. |
| 119 | Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width or weight between 36 to 60 kg and fixed |
| 120 | M&L for cement concrete, type B-2 1:2:4 using (40 mm graded stone agg)in surface channels and drains |
| 121 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc all as specified. |
| 122 | S&F in repairfor 1200x450mm looking mirror of selected quality glass 4 mm thick mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers, with and including LED based illuminating background light, complete all as specified & directed. |
| 123 | M&L for ante-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed. |
| 124 | M&L for PCC type B1 (1:2:4) using 20 mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.” |
| 125 | M&L for soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.40m dia, 3.00m depth complete all as spd & directed |
| 126 | M&L for septic tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc complete for 100 users. |
