|
| 1 | SOFA SET 4/5 SEATER- FD-281/373Replacement of existing foam cushion of Sofa includingexisting tapestry cloth of sofa set 4/5 seater, and supply & fix new PU Moulded Foam of density 50-55 kg per cubic meter of size 560 x 535 x 100mm thick,duly stitched with tapestry cloth and closed with Velcro of suitable size completeall as specified in drawing and diredted by Engr-in-Charge |
| 2 | M&L for smoothening surface with sand paper of Sofa set four seaterfor repolishing the old polished surface including bottom with one coat of french polish complete all as specified in drawing and diredted by Engr-in-Charge |
| 3 | M&L for smoothening surface with sand paper of Sofa set five seaterforrepolishing the old polished surface or unpolished surface including bottom of sofawith one coat of french polish both above and below the sofa complete all as specified and directed by Engr-in-charge |
| 4 | CHAIR DINING :- FD-16(M)/203/ 279 S&F in repair following part of chair dining of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing completeall as specified and directed.Rear Legs |
| 5 | Front Legs |
| 6 | Side rail of seat frame includingdrilling holes for weaving (spacing of holes shall be as per existing) |
| 7 | Front/back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing) |
| 8 | Bottom stiffener |
| 9 | Back stiffener |
| 10 | M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed. |
| 11 | CHAIR WRITING :- FD-20(M)/202/280S&F in repair following part of chair writing with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.Rear legs |
| 12 | Front Legs |
| 13 | Side rail of seat frame including drilling holes for weaving(spacing of holes shall be as per existing) |
| 14 | Front/Back rails of seat frame including drilling holes for weaving(spacing of holes shall be as per existing) |
| 15 | Bottom stiffener |
| 16 | Back stiffener |
| 17 | Arm rest |
| 18 | M&L for polishing of chair writing with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed. |
| 19 | CHAIR EASY:-FD-17(M)/201 /229S&F in repairs following parts of the chair easy with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.Rear Legs |
| 20 | Front Legs |
| 21 | Side Rails |
| 22 | Front/Back Rails |
| 23 | Back Stiffener |
| 24 | Bottom Stiffener |
| 25 | Arms rest |
| 26 | M&L for polishing of chair easy with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed. |
| 27 | REPAIR OF PEG TABLE :- FD-236/266 /277/384S&F in repair of the following parts of Table Peg with Ist class hard wood (teak) as per existing shape and size duly planned as shown on drawing complete all as specified as directed and as shown on drawing.Legs |
| 28 | Long rail |
| 29 | Short rail |
| 30 | Side stiffener |
| 31 | Removing the existing unserviceable table top of peg table and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge |
| 32 | M&L for polishing of table Peg with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed. |
| 33 | REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES-FD-67 (M)/351/1031Removal ofold existing U/S shutter (Single Leaf) of almirah large steel and S&F new shutter made of 1 mm thick CRCA sheet as per existing shape and size incl a coat of red oxide primer on both sideand preparation of new steel surfaces completeall as specified and directed. |
| 34 | All as per item No 6 here-in-before but Shelves |
| 35 | All as per item No 6 here-in-before but Cover plate of locks |
| 36 | Removing U/S lock of almirah large and S&F new brasslock 6 levers Godrej pattern as per existing size with duplicate keys complete all as specified and directed |
| 37 | Removing of old U/S lock assembly and S&F new lock assembly of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer and preparation of new steel surfaces complete all as specified and directed. |
| 38 | Removing of old U/S handle of almirah and S&F new chromiumplated steel handle of existing shape and size complete all as directed |
| 39 | Removing of old U/S key plate and S&F of new Chromium plated key plate fixed with screw and nuts of almirah large steel complete all as directed. |
| 40 | Removing of old U/S leg of almirah large steel and S&F new leg made of 1 mm thick PBI sheet with Gas welding as per existing shape and size incl a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed. |
| 41 | M&L for painting spray painting of almirah large steelwith two coat synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces complete all as specified and directed. |
| 42 | REPAIR TO ALMIRAH MEDIUM STEEL WITH SHELVES - FD-67 (M)/350 /1032All as per item No 6 here-in-before but shutter of Almirah Medium |
| 43 | All as per item No 6 here-in-before but Shelves of Almirah Medium |
| 44 | All as per item No 6 here-in-before but Cover plate of locks of Almirah Medium |
| 45 | All as per item No 6.03 here-in-before but locks of Almirah Medium |
| 46 | All as per item No 6.04 here-in-before but lock assemblyof Almirah Medium |
| 47 | All as per item No 6.05 here-in-before but Handleof Almirah Medium |
| 48 | All as per item No 6.06 here-in-before but Key Plate of Almirah Medium |
| 49 | All as per item No 6.07 here-in-before but Legsof Almirah Medium |
| 50 | All as per item No 6.08 here-in-before but Painting of Almirah Medium |
| 51 | LOCKER BED SIDE STEEL-FD-257/1029All as per item No 6 here-in-before but shutter of Locker steel |
| 52 | All as per item No 6 here-in-before but shelves of Locker steel |
| 53 | All as per item No 6.05 here-in-before but Handle \"D\" type of Locker steel |
| 54 | All as per item No 6.07 here-in-before but Legsof Locker steel |
| 55 | All as per item No 6.08 here-in-before but Painting of Locker steel |
| 56 | Removing of old U/S haps and stapple and S&F of new Chromium plated haps & stapple fixed with rivets of locker steel complete all as directed. |
| 57 | TABLE DINING OR\"s - FD-165(M) Supply and fixing in replacement including welding mild steel square tube of size 25mm x 25mmx 1.6 mm thick as in frame complete all as specified and directed by Engr -in charge |
| 58 | Supply and fixing in replacement of top with 18 mm thick block board of size 1900 mm x 685 mm with aluminium sheet 22 guage on top complete all as specified and directed by Engr -in charge |
| 59 | REPAIR TO CHAIR CB STEEL WITH ARMS -FD-75(M)Removing the existing unserviceable/ broken seat for chair CB steel with arms and supply and fix new Seat of size 450 x 390 mm complete with frame made out of 12mm thick plywood duly pasted with 75mm PU Foam covered with tapestry Jute pattern dark brown/Red/Choclate colour not less than Rs 250 per RM . The seat frame to be bolted to the MS tublar frame of the chair by four 75mm long screw complete all as specified and directed by Engr -in charge |
| 60 | All as per item No 10 above but back frame |
| 61 | Removal of old u/s arms of chair CB steel with arms and S&F new arms made of 1st class hard shisham wood duly planned,finished smooth with black hish class polish and fixed with steel screws of required size complete all as specified and directed by Engr -in charge |
| 62 | M&L for painting to chair CB steel with arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed by Engr -in charge |
| 63 | REPAIR TO CHAIR VERANDAH -FD-256/259/359Removing the existing unserviceable/ plastic cane, new PVC seat made of PPCP material 4mm thick(Make : AMKO/SWASTIC/HARMONY) of Chair Verandah MAP including taking down the old worn out /broken seat all as specified as shown on drg and directed by Engr-in-Charge. |
| 64 | Preparing the existing steel surfaces and spray panting with one coat of white synthetic enamel paint and providing new plastic shoes for chair verandah & including taking down old shoes complete all as specified as shown on drg and directed by Engr-in-Charge. |
| 65 | REPAIR TO TABLE OFFICE CLK/TYPIST STEEL - FD-84(M)/1004Removing the existing unserviceable/ broken top of steel table office clerk and S&F new table top of 1220 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade complete all as specified as shown on drg and directed by Engr-in-Charge. |
| 66 | Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engr-in-Charge. |
| 67 | Removal of old U/S lock and S&F new lock of 06 levers Godrej pattern with two keys completedall as specified and directed by Engr-in-Charge. |
| 68 | Taking down old U/S long rail table office clk/typist andS&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engr-in-Charge. |
| 69 | All as per item No 12.03 above but short rails |
| 70 | All as per item No 12.03 above but stiffener |
| 71 | All as per item No 12.03 above but legs |
| 72 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg. |
| 73 | M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed by Engr-in-Charge. |
| 74 | REPAIR TO TABLE 3\" x 2\" STEEL WITHOUT DRAWER STEEL - FD-1007Removing the existing unserviceable/ broken top of steel table 3\"x2\" and S&F new table top of 900 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade all as directed by GE/Engr-in-Charge |
| 75 | Taking down old U/S long rail table office 3\" x 2\" andS&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed. |
| 76 | All as per item No 13.01 above but short rails |
| 77 | All as per item No 13.01 above but stiffener |
| 78 | All as per item No 13.01 above but legs |
| 79 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg complete all as specified and directed by Engr-in-Charge. |
| 80 | M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed by Engr -in charge |
| 81 | REPAIR TO TABLE OFFICE OFFICER STEEL -FD-1003Removing the existing unserviceable/ broken top of steel table office offrs and S&F new table top of 1370 X 760 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade complete all as specified and directed by Engr -in charge |
| 82 | Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engr -in charge |
| 83 | Removal of old U/S lock and S&F new lock of 06 levers Godrej pattern with two keys complete all as specified and directed by Engr -in charge |
| 84 | Taking down old U/S long rail table office clk/typist andS&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed by gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engr -in charge |
| 85 | All as per item No 14.04 above but short rails |
| 86 | All as per item No 14.04 above but stiffener |
| 87 | ll as per item No 14.04 above but legs |
| 88 | Taking down oldU/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg complete all as specified and directed by Engr-in-Charge. |
| 89 | TM&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed by Engr-in-Charge. |
| 90 | REPAIR TO GI PIPE CHARPOY WITH PLYTOP -FD-220S&F in replacement of u/s Elbow galvanized iron 32 mm dia 3 ways complete all as specified and directed by Engr-in-Charge.Note:- weight of each elbow not less than 450 grams |
| 91 | S&F in replacement of u/s check nut galvanized iron 32 mm dia, complete all as specified and directed by Engr-in-Charge. Note :- weight of each check nut not less than 125 grams |
| 92 | S&F in replacement of long rail of 32 mm dia galvanized iron pipe medium grade incl cutting threading at both ends complete all as specified and directed by Engr-in-Charge. |
| 93 | Fixing only in repairs short rail of 32 mm dia GI pipe medium grade incl cutting, threading as required for short rail of GI Charpoy complete all as specified and directed by Engr-in-Charge.Note :- short rail shall be converted from long rail retrieved vide item No 15.02 here-in-before |
| 94 | Fixing only in repairs legs of 32 mm dia GI Pipe medium grade cutting, threading at one end as required for legs as per existing size incl S&F 1.6 mm thick, 40 mm dia MS Sheet base plate welded on another end complete all as specified and directed by Engr-in-Charge.Note :- Legs shall be converted from pipe retrieved vide item No 15.03 above. |
| 95 | Removing the existing unserviceable /broken ply wood top and supply and fixing new12 mm thickBWP Grade conforming to IS: 710plywood top ISI marked alongwith 12 in Nos Countersunk screws and washers on three stiffeners all as shown on Drg and as specified and directed by Engr-in-Charge. |
| 96 | RE-CANNING OF CHAIRS :-FD-228,229, 279,280,252,244Removing the existing unserviceable/ broken plastic cane and supplying and canning with new plastic cream colour cane 2 mm wide and 0.5mm thick, 4 mm thick for borders for canning of chair of all types including couch with detachable chair, bin soiled linen, stool dressing complete as per Godrej pattern and directed by Engr-in-Charge. |
| 97 | REPAIR TO CHAIR REVOLVING -TPRemoving unserviceable Seat of chair Revolving and Supply and Fix new Seat 75mm thick polyurethane foam(PU) moulded with density 50-55kg per cubic metre thick and hardnessover ready made plywood base of 12mm thick BWR Grade and duly covered with tapestry cloth not less than 350/- per RM and PVC liping all as specified and directed by Engr-in-Charge.Texture and shade of the tapestry to be got approved by GE/Engr-in-Charge before bulk repairs |
| 98 | All as per item No 17here-in-before but back of chair revolving |
| 99 | Removing the existing unserviceablePVC arm rest and Supply and Fix in repairs new PVC armrest of best quality one No in one piece arm rest of size 24cmx 6.4cmx 3.3cm shall be made out of polyurethane(PU) 76-85 shore ‘A’ Hardness and reinforced with MS insert scratch and weather resistant complete all as specified and directed by Engr-in-Charge. |
| 100 | Removal of old U/S pedestal assembly and S&F new pedestal assemblycomplete all as specified and directed by Engr -in charge |
| 101 | Taking down oldU/S twin wheel coasters and S&F newtwin wheel coasters press fitted at the bottom of leg complete all as specified and directed by Engr -in charge |
| 102 | REPAIR TO CHARPOY MS TUBE WITH PLYTOP -FD/MAP-II/01Removing the existing unserviceable /broken ply wood top and supply and fixing new12 mm thickBWP Grade conforming to IS: 710plywood top ISI marked alongwith 06 in Nos Countersunk screws and washers on three stiffeners all as shown on Drg and as specified and directed by Engr -in charge |
| 103 | REPAIR TO TABLE 900mm x 600mm WITHDRAWER -FD-283S&F in repair of the following parts of table 900mm x 600mm with drawer with Ist class hard wood (teak) as per existing shape & size duly plannedas shown on drg complete all as spcd and directed by Engr -in chargeLegs |
| 104 | Long Rail |
| 105 | Short Rail |
| 106 | Bottom Side stiffener |
| 107 | Bottom Centre stiffener |
| 108 | Drawer |
| 109 | Removing the existing unserviceable/ broken top of wooden table 3\"x2\" and S&F new table top of 900 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade all as directed by GE/Engr-in-Charge |
| 110 | M&L for polishing of table900x600mm w/o drawer with highclass French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed by Engr -in charge |
