|
| 1 | Supplying all materials & T&P for manual labour charges for excavating bore holes for single under reamed piles of 250mm dia centre to centre length including casting & laying of M.S Rod etc. |
| 2 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50 Mtr. & lift of 1.5 Mtr. etc. complete as per the direction of the Engineer-incharge. |
| 3 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-in-charge. |
| 4 | Cement concrete (1:4:8) with 04cm size H.G.B crusher broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. |
| 5 | Rigid smooth centering & shuttering H.G RCC works. (a) RCC foundation plinth footing base of column. |
| 6 | (b) Lintal |
| 7 | © RCC Roof slab and chajja upto 4.3 Mtr |
| 8 | (d) RCC Column |
| 9 | Cement concrete (1:2:4) with 12mm size black H.G.B crusher broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge. |
| 10 | Brick work with Fly Ash Brick 25cm x 12cm x 08cm size having crushing strength not less than 75kg/ cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge. In foundation and plinth |
| 11 | Brick work with Fly Ash Brick 25cm x 12cm x 08cm size having crushing strength not less than 75kg/ cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in superstructure. complete as per the Engineer-incharge. |
| 12 | 2.5 cm DPC with CC (1:2:4) using 12mm.size H.G Chips. |
| 13 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 14 | Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 15 | Labour charges for cutting bending binding tying the Grills including the cost of binding wires(18 to 20 gauge) including cost of M.S Rod. |
| 16 | 25mm thick A.S flooring with C.C (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 17 | Cost of Iron Door with Choukath (1.00x2.00m) 1 No & Iron Window with Choukath (0.75x1.00m) size 1 No. |
| 18 | Labour for fitting and fixing of M.S Door shutter & window shutter with grills including cost of screw complete as per approved design. |
| 19 | Finishing wall with water proofing cement paint two coats. |
| 20 | Labour charges for painting two coats with any approved paint over two coat primer. |
| 21 | 12mm cement plaster in cement mortar (1:4) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 22 | Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. |
| 23 | Writing charge of required information and data on both side of the transperancy pillar and on the wall of the pump chamber including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. |
| 24 | Cost of Enamel Paint |
| 25 | Supplying of Rigid UPVC Pipe of 200mm.dia ivory grey colour having specific gravity of 1.4 to 1.46 gms/cc of straight length of 6Mtrfor portable water supplies specification bearing ISI mark for working pressure of 2.5kgf/cm2 as per latest amendment of IS 4985 including cost of coupler for plain ended pipes of one end plain and other bell ended. PDI test are to be conducted and should be marked on body of each pipe and report is to be obtained from CIPET, BBSRfor necessary approval of authority including transportation and laying at site and joining the solvent cement including the cost of solvent cement. The pipe should be clearly & indelible marked ink or stenciled confirming to IS 4985/2000 with CIPET certificate (Pre-CIPET Test & Post CIPET Test). |
| 26 | Supplying all materials, labour and T&P for laying & fitting of 200mm.dia UPVC (Class-I) in underground in proper alignment including testing of Pipeline supply of jointing materials like solvent cement, carriage of all materials to work site as per direction of Engineer-in-charge. |
| 27 | Supplying of 100mm dia nominal bore GI Pipe having wall thickness 4.5mm.electrical resistance welded.Medium class confirming to IS 1239(Pt-1/2004) with latest amendment screwed at both ends as per IS-554 with screw & socketed with one end and other end protected with plastic threaded protector.The socket confirming to IS 1239(PT-II 1992)with latest amendment with random length of 4 to 7 Mtr& socket bear ISI certification & manufacturer Trande Marks including all taxes etc.with guarantee. |
| 28 | Cost of 100mm.dia G.I Bend confirming to IS-1239 (Pt-II 1992) including all taxes etc. |
| 29 | Cost of 100mm dia G.I Flange confirming to IS No6392/1971 with ISI Mark including all taxes etc. |
| 30 | Supplying fitting fixing of 100mm Dia M.S Tubewell clamp (Heavy Duty) including all taxes and royalties etc. |
| 31 | Supplying fitting fixing of 200mmX100mm dia M.S Tubewell Cap including all taxes and royalties etc. |
| 32 | Supplying fitting fixing of 200mm dia P.V.C End Cap 6 kgf./Cm2 including all taxes, cost & conveyance and royalties etc. |
| 33 | Supplying fitting fixing of 6mm2 PVC insulated Wire Rope for preventing slipping the Submerssible Pumpsets including all taxes and royalties etc. |
| 34 | Supplying fitting fixing of 100mm G.I Socket confirming to IS-1239(PT-II 1992) including all taxes and royalties etc. |
| 35 | Supplying fitting fixing of 200X200X160mm PVC Tee 10 Kgf. Confirming to (IS-4985/2000) including all taxes and royalties etc. |
| 36 | Supplying fitting fixing of 160X160X160mm PVC Equal Tee (6 Kgf/Cm2) confirming to PL-RPVC-IS 200F & Aseccories. |
| 37 | Supplying fitting fixing of 200X110mm reducing socket 6 kg F/Cm2 PVC/ MS including all taxes and royalties etc. |
| 38 | Supplying fitting fixing of 100mm dia C.I Sluice Valve Confirming IS-14846/2000 Part-I with ISI Mark handwheel, G.M Fitting, Brass espindle including all taxes & royalties etc. |
| 39 | Supplying fitting fixing of all materials for jointing 160mm PVC pipe in delivery side with prim ing Tee, Sluice valve, NR Valve, Air Release Valve, Raiser Tee etc. with labour charges. |
| 40 | Cost of labour charges for lowering of Submerssible Motor with all assessories including cost of Transportation etc. |
| 41 | Supplying fitting fixing of 160X160X110 MS Raiser Tee with flange and bend etc.accessories including all taxes & royalties of materials. |
| 42 | Supplying fitting fixing of all materials for 50mm dia Air Release Valve shall confirm to to IS 14845 with saddle, Raiser pipe & other fitting materials including all taxes & royalties of materials. |
| 43 | Supplying fitting fixing of 200mm.dia P.V.C Coupler 6 kgf./Cm2 including all taxes,cost & conveyance and royalties etc. |
| 44 | Supplying fitting fixing of 160mm dia P.V.C End Cap including all taxes, cost & conveyance and royalties etc. |
| 45 | Supplying fitting fixing of 160mm dia P.V.C Coupler 4 kgf./Cm2 including all taxes, cost & conveyance and royalties etc. |
| 46 | Cost of Nutbolt & Rubber Insertion etc. |
| 47 | Cost of Out let for Tee Tank |
| 48 | Supplying of 7.5 HP./5.6 KW Star Rated (BEE 03 Star Energy efficient) Submerssible pumpset Coupled with totally enclose water cooled squirrel cage induction motor with delivery discharge 900 LPM at 25 Mtrhead (having Bronze metal impeller grade LTB-02 of IS 318/1981 confirming to IS specification) with full length cable, cable clip, support clamp etc. suitable for operation at 415+6%,- 15% Volt, 3 Phase, 50 Hz and AC Power supply with ISI Mark gauarantee including all taxes. |
| 49 | Supplying of Autostar Delta Control Pannel Starter of sheet steel enclosure suitable for operation of 7.5 HP/5.6 KW squirrel cage induction Motor with 16 amp (AC/3) duty contactor at 415 Volt+6% - 15%, 3 Phase, 50 HZ,AC supply with over load relay range 8.9 Amp to 13.5 Amp. and No volt coil with Electronic timer suitable for operation at voltage of 300 - 400 volt and to provide dependable protection during over load and single phasing including all taxes etc. with ISI make guarantee. |
| 50 | Supplying of 3 core X10mm2 PVC Insulated(HD) Armoured Electric cable with Aluminium Conductor for use in 3 Phases power system of working voltage upto and including 11 KV of 50 HZ confirming to IS-1554 (PT-5)/1998 with ISI mark including all taxed etc. |
| 51 | Supplying 63 Amp 415 volt T.P Main switch confirming to IS- 4064 (PT-1 & PT-II) with utilisation category AC-22 with ISI mark including all taxes etc. |
| 52 | Pipe earthing with 30mm dia x 3 Mtr G.I Pipe with proper slotting-02 Nos.,30mm diam G.I Flange-02 Nos., No 8 G.I Wire-10Kg., Charcol-10 bags, Salt-100Kg., 50mm diam flexible conduit pipe-05 Mtr., digging earth pit 02 Nos. (1.2m x1.2m x3m) and earth trench-03x6.3mx1.0mx06m with transportation, fitting and labour charges etc complete as per direction of Engineer-In-charge. |
| 53 | Labour charges for Electrical Installation &energisation |
| 54 | Supplying all materials T&P and labour for wiring of Pump Chamber with required wiring materials like 7/20 PVC wire,3/20 PVC Wire, Ampere Tape, PVC Tape, 63 Amp. Kit Kat,12\"X10\" Tin Board with fibre plate, Indicator Lamp with holder,angle holder,rotary switch, 1/4\" conduit Pipe, Flexible conduct 05 Pin Socket, Wall Clamp, Nut Bolt, 03 Way boz,100 W Bolt Switch and fitting. Fixing on completion of wiring including supplying,Transportation of materials to work site including cost conveyance royalty taxes of all materials as per direction of Engineer-in-charge. |
| 55 | Supplying all materials T&P and labour for fitting of T.D.Cable with Main supply line underground by digging cable,Trench & fitting after laying of cable connection the pannel as required as per direction of the site Engineer-in-charge. |
| 56 | Supplying 4KVAR Capacitor including all taxes etc. |
| 57 | Supplying 4 mm2 single core PVC coated Copper wire including all taxes etc. |
| 58 | Repair and Re-erection of tilted 11 /0.4 KV , 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary boundary wall with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPCOCL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning as per specification of TPCODL etc complete. |
| 59 | Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
