|
| 1 | LOW HEIGHT BOUNDARY WALL- Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. |
| 2 | Filling foundation & Plinth with excavated materials well watered & rammed etc. complete |
| 3 | Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge |
| 4 | 300mm dia 3.00mtr long Single Under ream Pile foundation with RCC-M20 using 12mm size black hard granite chips including cost of boring but excluding cost of MS/Tor steel and labour charges for cutting , bending and binding of steel. |
| 5 | Supplying, filling in foundation & plinth with sand in layers including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with T&P required for the work etc. complete |
| 6 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge. |
| 7 | Brick work with Flyash bricks 25 Cm. x 12 Cm. x 8 cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance + 2 percent in cement mortar (1:6) in foundation. |
| 8 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Pilecap |
| 9 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Grade Beam |
| 10 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Column |
| 11 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Roof Slab |
| 12 | Supplying, fitting and placing un-coated HYSD bar reinforcement complete as per drawing and technical specification |
| 13 | 12mm thick cement plaster (1:6) on brick work. |
| 14 | Providing & fixing 25 mm thick best quality Dholpuri stone Tiles. of approved quality, colour and size between 0.1 sqm to 0.4 sqm in dado/skirting confirming to IS specifications over 12mm thick cement mortar (1: 3) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with white cement and colouring pigment to match the colour and shade of stones, cleaning the surface with Oxalic acid and polishing complete including the cost, conveyance, , of all materials, cost of labour, loading, unloading, T&P, etc. complete as per the direction of Engineer-in-Charge. |
| 15 | Painting two coats of synthetic enamel paint over Iron Works as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance, ,, materials, labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use) |
| 16 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. including cost of all materials with ,, transportation, all labour, sundries, T&P etc. complete as per direction of Engineer in charge. |
| 17 | Emergency Exit gate with sentry post (2Nos)- Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. |
| 18 | Filling foundation & Plinth with excavated materials well watered & rammed etc. complete |
| 19 | Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge |
| 20 | 300 MM DIA 6.00 M Long Double Under ream Pile foundation with RCC M25 using 12mm size black hard granite chips including cost of boring but excluding the cost of MS/Tor steel and labour charges for cutting, bending, binding of steel. |
| 21 | Supplying, filling in foundation & plinth with sand in layers including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with T&P required for the work etc. complete |
| 22 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge. |
| 23 | Cement concrete (1:2:4) with 12mm hard granite chips(Crusher broken) per 1 cum. |
| 24 | Brick work with Flyash bricks 25 Cm. x 12 Cm. x 8 cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance + 2 percent in cement mortar (1:6) in foundation. |
| 25 | Brick work with Flyash bricks 25 Cm. x 12 Cm. x 8 cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance + 2 percent in cement mortar (1:6) in Super-Structure. |
| 26 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Pilecap |
| 27 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Grade Beam |
| 28 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Column |
| 29 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Roof Beam |
| 30 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Roof Slab |
| 31 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Lintel |
| 32 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Chajja |
| 33 | Supplying, fitting and placing un-coated HYSD bar reinforcement complete as per drawing and technical specification |
| 34 | 12mm thick cement plaster (1:4) over brick with cement punnig for exernal wall |
| 35 | 12mm thick cement plaster (1:6) on brick work. |
| 36 | 16mm thick cement plaster (1:6) over brick or stone masonry. |
| 37 | 6mm thick cement plaster (1:4) to R.C.C. surfaces finished smooth including deep chiping and slury treatement. |
| 38 | Supplying, fitting & fixing of 8-10 mm thick & size of 600x600 mm vertified floor tile of with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) |
| 39 | Fixing of vetrifed wall tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles or stones. |
| 40 | Supplying, fitting and laying pressed clay Tiles ( as per approved pattern 20mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 mixed with 2% integral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 Coarse Sand) and finished neat complete . as per the direction of Engineer-in-Charge. |
| 41 | Providing & fixing 25 mm thick best quality Dholpuri stone Tiles. of approved quality, colour and size between 0.1 sqm to 0.4 sqm in dado/skirting confirming to IS specifications over 12mm thick cement mortar (1: 3) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with white cement and colouring pigment to match the colour and shade of stones, cleaning the surface with Oxalic acid and polishing complete including the cost, conveyance, , of all materials, cost of labour, loading, unloading, T&P, etc. complete as per the direction of Engineer-in-Charge. |
| 42 | Finishing plastered surfaces of walls with Cement based Putty & making smooth to receive painting including cost of Birla Putty. |
| 43 | Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, ,, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) |
| 44 | Painting two coats of synthetic enamel paint over Iron Works as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance, ,, materials, labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use) |
| 45 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 46 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 47 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. including cost of all materials with ,, transportation, all labour, sundries, T&P etc. complete as per direction of Engineer in charge. |
| 48 | Open Air Theater with Green Room- Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. |
| 49 | Filling foundation & Plinth with excavated materials well watered & rammed etc. complete |
| 50 | Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge |
| 51 | 300 MM DIA 6.00 M Long Double Under ream Pile foundation with RCC M25 using 12mm size black hard granite chips including cost of boring but excluding the cost of MS/Tor steel and labour charges for cutting, bending, binding of steel. |
| 52 | Supplying, filling in foundation & plinth with sand in layers including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with T&P required for the work etc. complete |
| 53 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge. |
| 54 | Cement concrete (1:2:4) with 12mm hard granite chips(Crusher broken) per 1 cum. |
| 55 | Brick work with Flyash bricks 25 Cm. x 12 Cm. x 8 cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance + 2 percent in cement mortar (1:6) in foundation. |
| 56 | Brick work with Flyash bricks 25 Cm. x 12 Cm. x 8 cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance + 2 percent in cement mortar (1:6) in Super-Structure. |
| 57 | Brick work with Fly ash Bricks having crushing strength 75kg/cm2 with dimension tolerance ± 8% in Cement mortar(1:4) in F&P |
| 58 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Pilecap |
| 59 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Grade Beam |
| 60 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Column |
| 61 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Roof Beam |
| 62 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Roof Slab |
| 63 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Lintel |
| 64 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Chajja |
| 65 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Seat Out Area - RAFT |
| 66 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Seat Out Area - RCC Wall |
| 67 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Seat Out Area - RCC Gallery Slab |
| 68 | Supplying, fitting and placing un-coated HYSD bar reinforcement complete as per drawing and technical specification |
| 69 | 12mm thick cement plaster (1:4) over brick with cement punnig for exernal wall |
| 70 | 12mm thick cement plaster (1:6) on brick work. |
| 71 | 16mm thick cement plaster (1:6) over brick or stone masonry. |
| 72 | 6mm thick cement plaster (1:4) to R.C.C. surfaces finished smooth including deep chiping and slury treatement. |
| 73 | Finishing plastered surfaces of walls with Cement based Putty & making smooth to receive painting including cost of Birla Putty. |
| 74 | Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, ,, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) |
| 75 | Wall painting two coats with 100% Acrylic emulsion paint (1st quality) weather seal coat exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. |
| 76 | Providing & fixing 25 mm thick best quality Dholpuri stone Tiles. of approved quality, colour and size between 0.1 sqm to 0.4 sqm in dado/skirting confirming to IS specifications over 12mm thick cement mortar (1: 3) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with white cement and colouring pigment to match the colour and shade of stones, cleaning the surface with Oxalic acid and polishing complete including the cost, conveyance, , of all materials, cost of labour, loading, unloading, T&P, etc. complete as per the direction of Engineer-in-Charge. |
| 77 | Supplying, fitting & fixing of 8-10 mm thick & size of 600x600 mm vertified floor tile of with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) |
| 78 | Fixing of vetrifed wall tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles or stones. |
| 79 | Other building item no.1(b) of /S/R-2012:Fixing of Industrial vetrified tiles in floors of Size 600x600mm of approved make coformaing to I.S:13755 laid on on 25mm thick bed of Cement mortar 1:4 ( 1 Cement : 4 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. ( For new work) |
| 80 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. including cost of all materials with ,, transportation, all labour, sundries, T&P etc. complete as per direction of Engineer in charge. |
| 81 | Painting two coats of synthetic enamel paint over Iron Works as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance, ,, materials, labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use) |
| 82 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 83 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 84 | Dressed seasoned salwood work framed and fixed(wrought & Put up)in trusses, purlins, frames of doors & windows, ventilators & beams in burghas,rafters and posts. |
| 85 | Supplying and fixing W.I. clamps 33cm to 38cm long of 35mm x 5mm size for doors and windows and ventilators including fixing in cement concrete (1:3:6) with 12 mm. to 20mm hard stone chips or in cement mortar (1:3) including cost of all materials. |
| 86 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design including cost of all door fittings and fixtures etc. complete |
| 87 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification etc all completed. |
| 88 | PARKING AREA WITH PAVER BLOCK ROAD - Loosening,leveling and compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm mixed with water at OMC and then compacted by Vibratory Road Roller so as to achive minimum dry density to meet the requirement of Table-300.2 and as per Clause 305 of MoRT&H Specifications for Road & Bridge works(4th Revision) including cost, conveyance, Royalities, Taxes of all materials,all labours,hire and running charges of all machineries,T&P ,sundries etc. complete as per spcification and direction of Engineer-in-Charge. |
| 89 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018. |
| 90 | Construction of granular sub-base by providing Grading-VI Material as per table 400-2, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 |
| 91 | Yoga Pindhi (12Nos) - Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. |
| 92 | Filling foundation & Plinth with excavated materials well watered & rammed etc. complete |
| 93 | Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge |
| 94 | Supplying, filling in foundation & plinth with sand in layers including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with T&P required for the work etc. complete |
| 95 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge. |
| 96 | Brick work with Flyash bricks 25 Cm. x 12 Cm. x 8 cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance + 2 percent in cement mortar (1:6) in foundation. |
| 97 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying. for Roof Slab |
| 98 | Supplying, fitting and placing un-coated HYSD bar reinforcement complete as per drawing and technical specification |
| 99 | 12mm thick cement plaster (1:4) over brick with cement punnig for exernal wall |
| 100 | Fixing Dholpuri Stone Tiles. in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointedwith neat cement slurymixedwithpigment tomatch theshades of the tiles including rubbing and polishing complete excluding cost of precast tiles |
| 101 | Providing and laying 6mm thick Glazed Ceramic Wall Tiles of approved make, quality, colour and size 300mm x 200mm in dado/skirting upto required height from floor level fixed in neat cement slurry after soaking the tiles in water and fixing over an under layer of 12mm thick cement mortar (1:3) , filling joints with white cement mixed with colouring pigments to match the colour and shade including washing and cleaning with Oxalic acid including polishing, cost of all materials, labour, ,, transportation, loading & unloading, royalties, sundries, T&P, watering and curing etc. complete as per the direction of the Engineer-in-Charge. |
| 102 | Supplying, fitting and fixing of Yoga pindhi Canopy |
| 103 | ARBORICULTURE - Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. |
| 104 | Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 105 | Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment). |
| 106 | Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge. |
| 107 | Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge. |
| 108 | Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 109 | Main Entrance Gate (Superstructure) - Cement concrete (1:2:4) with 12mm hard granite chips(Crusher broken) per 1 cum. |
| 110 | Brick work with Flyash bricks 25 Cm. x 12 Cm. x 8 cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance + 2 percent in cement mortar (1:6) in Super-Structure. |
| 111 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Column |
| 112 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Roof Beam |
| 113 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Roof Slab |
| 114 | RCC work of M-25 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying - Lintel |
| 115 | Supplying, fitting and placing un-coated HYSD bar reinforcement complete as per drawing and technical specification |
| 116 | 12mm thick cement plaster (1:6) on brick work. |
| 117 | 16mm thick cement plaster (1:6) over brick or stone masonry. |
| 118 | 6mm thick cement plaster (1:4) to R.C.C. surfaces finished smooth including deep chiping and slury treatement. |
| 119 | Finishing plastered surfaces of walls with Cement based Putty & making smooth to receive painting including cost of Birla Putty. |
| 120 | Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, ,, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) |
| 121 | Wall painting two coats with 100% Acrylic emulsion paint (1st quality) weather seal coat exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. Please Enable Macros to View BoQ information |
