Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | AR/SR/Anurakshan/Sewage works of C and D Type and other Govt. Resi. Qtrs. in Sect. No. 15 under RTC Sub Dn, PWD Bhopal Please Enable Macros to View BoQ information Bill of Quantities (BOQ) Name of work : AR/SR/Anurakshan/Sewage works of C and D Type and other Govt. Resi. Qtrs. in Sect. No. 15 under RTC Sub Dn, PWD Bhopal Probable Amount of contract : (Rs. in Figures) : Rs.78.00 Lacs (Rs in words) : Rupees Time Alloved :09 months SNo SOR Item Particulers of Item Unit Rate Remark |
| 2 | 1.2 1.2.1 Lime, moorum, building rubbish cum 53.43 1.2.2 Earth cum 66.78 1.2.3 Manure or sludge cum 58.07 1.2.4 Excavated rock cum 106.85 1.2.5 Sand, stone aggregate below 40mm nominal size cum 66.78 1.2.6 Stone aggregate 40mm nominal size and above cum 72.2 1.2.7 Stone soling cum 78.57 1.2.8 Bricks 1000 Nos. 124.66 1.2.9 S.W. Pipes 1.2.9.1 100 mm dia 100 m 96.94 1.2.9.2 150 mm dia 100 m 164.95 1.2.9.3 200 mm dia 100 m 230.57 1.2.9.4 250 mm dia 100 m 384.35 1.2.9.5 300 mm dia 100 m 549.07 1.2.9.6 350 mm dia 100 m 768.7 1.2.9.7 400 mm dia 100 m 960.87 1.2.9.8 450 mm dia 100 m 1164.7 1.2.9.9 500 mm dia 100 m 1423.52 1.2.9.10 600 mm dia 100 m 1747.05 1.2.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 1.2.10.1 100 mm dia 100 m 135.49 1.2.10.2 125 mm dia 100m 165.79 1.2.10.3 150 mm dia 100 m 190.91 1.2.10.4 200 mm dia 100 m 286.47 1.2.10.5 250 mm dia 100 m 503.52 1.2.10.6 300 mm dia 100 m 630.09 1.2.10.7 350 mm dia 100 m 900.82 1.2.10.8 400 mm dia 100 m 1048.23 1.2.10.9 450 and 500 mm dia 100 m 1397.64 1.2.10.10 600, 700, 750 and 800 mm dia 100 m 1537.41 |
| 3 | 1.3 1.3.1 Lime, moorum, building rubbish cum 11.63 1.3.2 Earth cum 14.54 1.3.3 Manure or sludge cum 12.64 1.3.4 Excavated rock cum 23.27 1.3.5 Sand, stone aggregate below 40mm nominal size cum 14.54 1.3.6 Stone aggregate 40mm nominal size and above cum 15.72 1.3.7 Stone soling cum 17.11 1.3.8 Bricks 1000 Nos. 27.14 1.3.9 S.W. Pipes 1.3.9.1 100 mm dia 100 m 14.21 1.3.9.2 150 mm dia 100 m 24.19 1.3.9.3 200 mm dia 100 m 33.81 1.3.9.4 250 mm dia 100 m 56.36 1.3.9.5 300 mm dia 100 m 80.51 1.3.9.6 350 mm dia 100 m 112.71 1.3.9.7 400 mm dia 100 m 140.89 1.3.9.8 450 mm dia 100 m 170.78 1.3.9.9 500 mm dia 100 m 208.73 1.3.9.10 600 mm dia 100 m 256.17 1.3.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 1.3.10.1 100 mm dia 100 m 19.87 1.3.10.2 125 mm dia 100m 24.31 1.3.10.3 150 mm dia 100 m 27.99 1.3.10.4 200 mm dia 100 m 42.0 1.3.10.5 250 mm dia 100 m 73.83 1.3.10.6 300 mm dia 100 m 92.39 1.3.10.7 350 mm dia 100 m 132.09 1.3.10.8 400 mm dia 100 m 153.7 1.3.10.9 450 and 500 mm dia 100 m 204.93 1.3.10.10 600, 700, 750 and 800 mm dia 100 m 225.43 |
| 4 | 2.4 2.4.1 beyond 30 cm girth up to and including 60 cm girth each 350.0 2.4.2 beyond 60 cm girth up to and including 120 cm girth each 1150.0 2.4.3 beyond 120 cm girth up to and including 240 cm girth each 3500.0 2.4.4 above 240 cm girth each 6300.0 |
| 5 | 2.7 2.7.1 Ordinary rock cum 287.0 2.7.2 Hard rock (requiring blasting) cum 519.0 2.7.3 Hard rock (blasting prohibited) cum 828.0 |
| 6 | 2.8 2.8.1 Ordinary rock cum 216.0 2.8.2 Hard rock (requiring blasting) cum 452.0 2.8.3 Hard rock (blasting prohibited) cum 593.0 |
| 7 | 2.9 2.9.1 Pipes, cables etc., not exceeding 80 mm dia. metre 96.0 2.9.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre 156.0 2.9.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. metre 244.0 |
| 8 | 2.12 2.12.1 Ordinary rock : 2.12.1.1 Pipes, cables etc. not exceeding 80 mm dia. metre 139.0 2.12.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. metre 344.0 2.12.1.3 Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia metre 395.0 2.12.2 Hard rock (requiring blasting) 2.12.2.1 Pipes, cables etc. not exceeding 80 mm dia. metre 251.0 2.12.2.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre 621.0 2.12.2.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia metre 715.0 2.12.3 Hard rock (blasting prohibited) 2.12.3.1 Pipes, cables etc. not exceeding 80 mm dia. metre 270.0 2.12.3.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre 670.0 2.12.3.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. metre 770.0 |
| 9 | 2.15 2.15.1 Depth not exceeding 1.5 m. sqm 118.0 2.15.2 Depth exceeding 1.5 m but not exceeding 3 m. sqm 122.0 2.15.3 Depth exceeding 3 m but not exceeding 4.5 m. sqm 130.0 |
| 10 | 2.16 2.16.1 Depth not exceeding 1.5 m. sqm 120.0 2.16.2 Depth exceeding 1.5 m but not exceeding 3 m. sqm 128.0 2.16.3 Depth exceeding 3 m but not exceeding 4.5 m. sqm 136.0 |
| 11 | 2.17 2.17.1 Depth not exceeding 1.5 m. sqm 105.0 2.17.2 Depth exceeding 1.5 m but not exceeding 3 m. sqm 109.0 2.17.3 Depth exceeding 3 m but not exceeding 4.5 m. sqm 114.0 |
| 12 | 2.23 2.23.1 In or under water and/or liquid mud, including pumping out water as required. metre depth 0.2 2.23.2 In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. metre depth 0.25 |
| 13 | 2.25 2.25.1 All kinds of soil. cum 30.0 2.25.2 Ordinary or hard rock. cum 53.0 |
| 14 | 2.27 2.27.1 With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) cum 393.0 2.27.2 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. cum 331.0 |
| 15 | 2.28 2.28.1 All kinds of soil. each 42.0 2.28.2 Ordinary rock each 68.0 2.28.3 Hard rock (requiring blasting) each 138.0 2.28.4 Hard rock (blasting prohibited) each 151.0 |
| 16 | 2.3 2.30.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 36.0 2.30.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 42.0 2.30.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. sqm 199.0 2.30.4 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 50.0 2.30.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. metre 201.0 |
| 17 | 2.39 2.39.1 Permanent piping system with Junction boxes sqm 113.0 2.39.2 Anti-termite chemical injected area sqm 53.0 |
| 18 | 4.1 4.1.1 With 20mm nominal size graded stone aggregate. 4.1.1.1 M-25 – Grade concrete cum 6338.0 4.1.1.2 M-20 – Grade concrete cum 4933.0 4.1.1.3 M-15 – Grade concrete cum 4471.0 4.1.1.4 M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) cum 3890.0 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.1 M-15 - Grade concrete cum 4403.0 4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) cum 3808.0 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate cum 3474.0 4.1.3 With fly ash. 4.1.3.1 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) Cum 3459.0 4.1.3.2 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. Cum 3150.0 |
| 19 | 4.2 4.2.1 With 20mm nominal size graded stone aggregate 4.2.1.1 M-25 – Grade concrete Cum 6582.0 4.2.1.2 M 20 – Grade concrete Cum 5177.0 4.2.1.3 M 15 – Grade concrete Cum 4714.0 4.2.1.4 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Cum 4134.0 4.2.2 With 40mm nominal size graded stone aggregate 4.2.2.1 M-15 - Grade concrete cum 4647.0 4.2.2.2 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate cum 4052.0 |
| 20 | 4.3 4.3.1 Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. Sqm 169.0 4.3.2 above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. sqm 267.0 4.3.3 Above plinth: Columns, pillars, posts and struts. Sqm 356.0 |
| 21 | 4.4 4.4.1 M-15 (With 20mm nominal size graded stone aggregate) cum 4471.0 4.4.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate cum 3890.0 |
| 22 | 4.6 4.6.1 M-25 (With 20mm nominal size graded stone aggregate) cum 5095.0 4.6.2 M-20 (With 20mm nominal size graded stone aggregate) cum 5558.0 4.6.3 M-15 (With 20mm nominal size graded stone aggregate) cum 5095.0 4.6.4 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. cum 4515.0 |
| 23 | 4.7 4.7.1 M-15 (With 20mm nominal size graded stone aggregate) cum 7057. 00 4.7.2 M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate cum 6477.0 |
| 24 | 4.8 4.8.1 M-15 (With 20mm nominal size graded stone aggregate) cum 5339.0 4.8.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. cum 5072.0 |
| 25 | 4.23 4.23.1 All works up to plinth level: 4.23.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) cum 5810.0 4.23.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) cum 5720.0 4.23.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) cum 5592.0 4.23.2 All works above plinth and upto floor two level 4.23.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 5930.0 4.23.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) cum 5886.0 4.23.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) cum 5758.0 |
| 26 | 4.24 4.24.1 All works up to plinth level: 4.24.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) cum 5910.0 4.24.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) cum 5869.0 4.24.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) cum 5740.0 4.24.2 All works above plinth and upto floor two level 4.24.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) cum 6315.0 4.24.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) cum 6235.0 4.24.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) cum 6106.0 |
| 27 | 5.1 5.1.1 M-20 Grade Concrete cum 6153.0 5.1.2 M-15 Grade Concrete cum 5397.0 |
| 28 | 5.2 5.2.1 M-20 Grade Concrete cum 6231.0 |
| 29 | 5.3 5.3.1 M-20 Grade Concrete cum 6541.0 |
| 30 | 5.4 5.4.1 M-20 Grade Concrete cum 5542.0 |
| 31 | 5.5 5.5.1 M-20 Grade Concrete 6906.0 |
| 32 | 5.6 5.6.1 M-20 Grade Concrete cum 6337.0 |
| 33 | 5.7 5.7.1 M-20 Grade Concrete cum 5448.0 |
| 34 | 5.9 5.9.1 Foundations, footings, bases of columns, etc. for concrete upto plinth level sqm 190.6 5.9.2 Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. 5.9.2.1 Uptoplinthlevel. sqm 219.0 5.9.2.2 Above plinth upto 3.6 m height from plinth level sqm 330.0 5.9.2.3 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. sqm 40.0 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 439.6 5.9.4 Shelves(Cast in situ) sqm 290.0 5.9.5 Lintels, beams, girders, bressumers and cantilevers sqm 356.0 5.9.6 Columns, P i l l a r s , Piers, Abutments, Posts and Struts. sqm 471.2 5.9.7 Stairs, (excluding landings) except spiral- Staircases. sqm 435.7 5.9.8 Spiral staircases (including landing). sqm 450.0 5.9.9 Arches, domes,vaults upto 6m span sqm 1141.6 40307.0 Extra for arches, domes, vaults exceeding 6 m span sqm 451.3 40672.0 Chimneys and shafts sqm 294.0 41038.0 Coffer/waffle slab of any size or shape as shown in the drawing. sqm 1481.0 41403.0 Well steining sqm 264.0 41768.0 Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. sqm 643.4 42133.0 Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). sqm 0.2 42499.0 Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. sqm 191.0 42864.0 Cornices and mouldings sqm 565.0 43229.0 Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. sqm 529.6 43594.0 Weather shade, Chajjas, corbels etc., including Edges. sqm 534.2 43960.0 Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) sqm 575.35 44325.0 Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) sqm 521.2 |
| 35 | 5.1 5.10.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). sqm 212.0 |
| 36 | 5.12 5.12.1 50 mm thick sqm 790.0 5.12.2 40 mm thick sqm 689.0 5.12.3 25 mm thick sqm 598.0 |
| 37 | 5.16 5.16.1 Mild steel and Medium Tensile steel bars. kg 78.0 5.16.2 Hard drawn steel wire kg 75.0 5.16.3 Cold twisted bars (CTD) kg 81.0 5.16.4 Hot rolled deformed bars kg 81.0 5.16.5 Hard drawn steel wire fabric kg 76.0 5.16.6 Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 kg 80.0 |
| 38 | 5.22 5. 22.1 12 mm thick sqm 402.0 5. 22.2 25 mm thick sqm 574.0 5. 22.3 50 mm thick sqm 674.0 |
| 39 | 5.23 5. 23.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 5. 23.1.1 150mm wide. RM 102.0 5. 23.1.2 200mm wide. RM 137.0 5. 23.1.3 250mm wide. RM 153.0 5. 23.2 Aluminium fluted strips 3.15mm thick. 5. 23.2.1 150 mm wide. RM 483.0 5. 23.2.2 200 mm wide. RM 646.0 5. 23.2.3 250 mm wide. RM 725.0 5. 23.3 Stainless steel Grade 304 plate-1.0 mm thick 5. 23.3.1 150 mm wide. RM 367.0 5. 23.3.2 200 mm wide. RM 443.0 5. 23.3.3 250 mm wide. RM 555.0 |
| 40 | 5.27 5.27.1 All works upto plinth level. cum 6100.0 5.27.2 All works above plinth level and upto floor five level. cum 6581.0 5.27.3 Add extra for each floor for all works above floor five level. cum 72.0 |
| 41 | 5.28 5. 28.1 Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) cum 110.0 5. 28.2 Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) cum 140.0 5. 28.3 Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) cum 280.0 5. 28.4 Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) cum 421.0 |
| 42 | 5.3 5.30.1 All works upto plinth level. cum 6332.0 5.30.2 All works above plinth level and upto floor V level. cum 6814.0 5.30.3 Extra for each additional floor for all works above floor five level cum 72.0 |
| 43 | 5.32 5.32.1 Non pigmented wet curing compound sqm 93.0 5.32.2 Pigmented wet curing compound. sqm 100.0 |
| 44 | 5.33 5. 33.1. Frame 125 mmx 60 mm (double rebate) RM 366.0 5. 33.2. Frame 100mmx 60 mm (Single rebate) RM 339.0 5. 33.3 Frame 85mmx 60 mm (Single rebate) RM 325.0 |
| 45 | 5.35 5. 35.1 12 mm thick sqm 441.0 5. 35.2 25 mm thick. sqm 894.0 5. 35.3 50 mm thick. sqm 1194.0 |
| 46 | 5.37 5.37.1 150mm wide meter 96.0 5.37.2 200mm wide meter 130.0 5.37.3 250mm wide meter 160.0 |
| 47 | 5.39 5. 39.1 Floor Joint of 100 mm gap metre 4857.0 5. 39.2 Floor Joint of 150 mm gap metre 5946.0 5. 39.3 Floor Joint of 200 mm gap metre 7616.0 |
| 48 | 5.4 5. 40.1 Wall Joint of 100 mm gap metre 4044.0 5. 40.2 Wall Joint of 150 mm gap metre 4552.0 5. 40.3 Wall Joint of 200 mm gap metre 5293.0 |
| 49 | 5.41 5.41.1 Roof Joint for 100 mm gap metre 4509.0 5.41.2 Roof Joint for 150 mm gap metre 5017.0 5.41.3 Roof Joint for 200 mm gap metre 5950.0 |
| 50 | 6.1 6.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5818.0 6.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5626.0 |
| 51 | 6.2 6.2.1 Cement mortar 1:4 (1 cement : 4 sand) cum 6012.0 6.2.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5821.0 |
| 52 | 6.3 6.3.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5252.0 6.3.2 Cement Mortar 1:6 (1 cement:6 sand). cum 5061.0 |
| 53 | 6.4 6.4.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5446.0 6.4.2 Cement Mortar 1:6 (1 cement:6 sand). cum 5255.0 |
| 54 | 6.5 6.5.1 Cement mortar 1:4 (1 cement : 4 sand) cum 4347.0 6.5.2 Cement Mortar 1:6 (1 cement: 6 sand). cum 4155.0 |
| 55 | 6.6 6.6.1 Cement mortar 1:4 (1 cement : 4 sand) cum 4541.0 6.6.2 Cement Mortar 1:6 (1 cement : 6 sand) cum 4350.0 |
| 56 | 6.7 6.7.1 Having 100 kg / cm2 average compressive strength. 6.7.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5384.0 6.7.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5162.0 6.7.2 Having 75 kg / cm2 average compressive strength. 6.7.2.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5271.0 6.7.2.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5049.0 6.7.3 Having 50 kg / cm2 average compressive strength. 6.7.3.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5158.0 6.7.3.2 Cement mortar 1:6 (1 cement : 6 sand) cum 4936.0 |
| 57 | 6.8 6.8.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5287.0 6.8.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5095.0 |
| 58 | 6.12 6.12.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 697.0 6.12.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 673.0 |
| 59 | 6.13 6.13.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 639.0 6.13.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 615.0 |
| 60 | 6.14 6.14.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 546.0 6.14.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 522.0 |
| 61 | 6.15 6.15.1 Having 100 kg/cm2 average compressive strength. 6.15.1.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 570.0 6.15.1.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 551.0 6.15.2 Having 75 kg/cm2 average compressive strength. 6.15.2.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 524.0 6.15.2.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 505.0 6.15.3 Having 50 kg/cm2 average compressive strength. 6.15.3.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 479.0 6.15.3.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 459.0 |
| 62 | 6.26 6.26.1 AAC Masonry in polymer modified mortar cum 5500.0 |
| 63 | 6.32 6.32.1 From ground level upto plinth level cum 4689.0 6.32.2 Above plinth level upto floor II level cum 5236.0 |
| 64 | 6.33 6.33.1 From ground level upto plinth level cum 4038.0 6.33.2 Above plinth level upto floor II level cum 4563.0 |
| 65 | 7.1 7.1.1 Cement mortar 1:6 (1 cement : 6 sand) cum 4147.0 |
| 66 | 7.2 7.2.1 Cement mortar 1:6 (1cement: 6 sand). cum 4351.0 |
| 67 | 7.4 7.4.1 Square or rectangular pillars cum 213.0 7.4.2 Circular pillars. cum 894.0 |
| 68 | 7.6 7.6.1 Cement mortar 1:6 (1 cement : 6 sand) cum 4603.0 7.6.2 Cement mortar 1:6 (1 cement : 6 sand) cum 4342.0 |
| 69 | 7.7 7.7.1 Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) cum 4803.0 7.7.2 Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) cum 4541.0 |
| 70 | 7.9 7.9.1 Square or rectangular pillars cum 235.0 7.9.2 Circular pillars. cum 1003.0 7.9.3 Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. cum 384.0 |
| 71 | 7.1 7.10.1 One face dressed. 7.10.1.1 Red sand stone cum 12905.0 7.10.1.2 White sand stone cum 12998.0 7.10.2 Both face dressed. 7.10.2.1 Red sand stone. cum 18003.0 7.11.2.2 White sand stone cum 18080.0 |
| 72 | 7.11 7.11.1 One face dressed. 7.11.1.1 Red sand stone cum 17182.0 7.11.1.2 White sand stone cum 17207.0 7.11.2 Both face dressed. 7.11.2.1 Red sand stone. cum 22264.0 7.11.2.2 White sand stone cum 22341.0 |
| 73 | 7.12 7.12.1 One face dressed 7.12.1.1 Red sand stone cum 27834.0 7.12.1.2 White sand stone cum 27912.0 7.12.2 Both face dressed. 7.12.2.1 Red sand stone. cum 39693.0 7.12.2.2 White sand stone. cum 39770.0 |
| 74 | 7.13 7.13.1 Red sand stone one face punched. cum 12190.0 7.13.2 Red sand stone both face punched cum 12267.0 7.13.3 White sand stone one face punched. cum 1654100.0 7.13.4 White sand stone double face punched cum 16618.0 |
| 75 | 7.15 7.15.1 Square or rectangular pillars cum 1771.0 |
| 76 | 7.18 7.18.1 Red sand stone cum 20629.0 7.18.2 White sand stone cum 19706.0 |
| 77 | 7.19 7.19.1 Triangular or Square or rectangular pillars cum 2310.0 7.19.2 Circular or polygonal pillars cum 6545.0 |
| 78 | 7.21 7.21.1 Red sand stone - exposed face fine dressed with rough backing. 7.21.1.1 70 mm thick. sqm 1321.0 7.21.1.2 60 mm thick. sqm 1299.0 7.21.1.3 50 mm thick sqm 1276.0 7.21.1.4 40 mm thick. sqm 1257.0 7.21.1.5 30 mm thick. sqm 1230.0 7.21.2 Red sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.2.1 70 mm thick. sqm 1808.0 7.21.2.2 60 mm thick. sqm 1785.0 7.21.2.3 50 mm thick sqm 1762.0 7.21.2.4 40 mm thick. sqm 1739.0 7.21.2.5 30 mm thick. sqm 1717.0 7.21.3 White sand stone - exposed face fine dressed with rough backing. 7.21.3.1 70 mm thick. sqm 1327.0 7.21.3.2 60 mm thick. sqm 1303.0 7.21.3.3 50 mm thick sqm 1280.0 7.21.3.4 40 mm thick. sqm 1256.0 7.21.3.5 30 mm thick. sqm 1233.0 7.21.4 White sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.4.1 70 mm thick. sqm 1813.0 7.21.4.2 60 mm thick. sqm 1790.0 7.21.4.3 50 mm thick sqm 1766.0 7.21.4.4 40 mm thick. sqm 1743.0 7.21.4.5 30 mm thick. sqm 1719.0 |
| 79 | 7.26 7.26.1 Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. sqm 1196.0 7.26.2 White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. sqm 1196.0 |
| 80 | 7.27 7.27.1 Red sand stone sqm 744.0 7.27.2 White sand stone sqm 744.0 |
| 81 | 7.3 7.30.1 Red sand stone cum 13187.0 7.30.2 White sand stone cum 13249.0 |
| 82 | 7.31 7.31.1 Red sand stone sqm 5797.0 7.31.2 White sand stone sqm 5797.0 |
| 83 | 7.35 7.35.1 25mm thick Kota stone slabs exposed face dressed and rubbed. sqm 1222.0 7.35.2 25mm thick Dholpur stone slabs exposed face dressed and rubbed. sqm 1469.0 7.35.3 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. sqm 900.0 7.35.4 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. sqm 1122.0 |
| 84 | 7.36 7.36.1 Granite stone of any colour and shade sqm 1524.0 7.36.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble sqm 1119.0 |
| 85 | 7.38 7.38.1 Red sand stone. sqm 1639.0 7.38.2 White sand stone sqm 1706.0 |
| 86 | 8.7 8.7.1 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) sqm 3800.0 8.7.2 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) sqm 3556.0 8.7.3 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) sqm 3312.0 |
| 87 | 9.1 9.1.1 Second class teak wood cum 90618.0 9.1.2 Sal wood cum 71309.0 9.1.3 Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) cum 72744.0 9.1.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 9.1.4.1 Frame of size 100mmX60mm single or double rebate meter 389.0 9.1.4.2 Frame of size 120mmX60mm double rebate. meter 457.0 |
| 88 | 9.3 9.3.1 Sal wood cum 76229.0 9.3.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. cum 77538.0 9.3.3 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. cum 64833.0 |
| 89 | 9.4 9.4.1 Second class teak wood cum 9062.0 9.4.2 Sal wood cum 7131.0 9.4.3 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. cum 7275.0 9.4.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. cum 6030.0 |
| 90 | 9.5 9.5.1 Second class teak wood 9.5.1.1 35 mm thick shutters sqm 2776.0 9.5.1.2 30 mm thick shutters sqm 2448.0 9.5.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 9.5.2.1 35 mm thick shutters sqm 2205.0 9.5.2.2 30 mm thick shutters sqm 1956.0 9.5.3 Kiln seasoned selected planks of sheesham wood. 9.5.3.1 35 mm thick shutters sqm 2060.0 9.5.3.2 30 mm thick shutters sqm 1816.0 9.5.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 9.5.4.1 35 mm thick sqm 1089.0 9.5.4.2 30 mm thick sqm 969.0 |
| 91 | 9.6 9.6.1 Second class teak wood sqm 2215.0 9.6.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood sqm 1763.0 9.6.3 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. sqm 971.0 9.6.4 Ply wood 5 ply, 9 mm thick : 9.6.4.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. sqm 1439.0 9.6.4.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type sqm 1369.0 9.6.5 Ply wood 7 ply, 9 mm thick : 9.6.5.1 Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. sqm 1861.0 9.6.5.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type sqm 1650.0 9.6.6 Particle Board 12 mm thick 9.6.6.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. sqm 791.0 9.6.6.2 Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. sqm 1087.0 9.6.6.3 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. sqm 1333.0 9.6.6.4 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. sqm 1390.0 9.6.6.5 Coir Veneer Board (conforming to IS 14842) 12 mm thick sqm 1298.0 9.6.7 Float glass panes 9.6.7.1 4 mm thick glass pane (weight not less than 10 kg/sqm) sqm 973.0 9.6.7.2 5 mm thick glass pane (weight not less than 12.5 kg/sqm) sqm 1046.0 9.6.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading sqm 1532.0 9.6.8.1 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum sqm 580.0 9.6.8.2 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum sqm 754.0 |
| 92 | 9.7 9.7.1 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : sqm 2717.0 9.7.2 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: sqm 2868.0 9.7.3 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: sqm 2775.0 |
| 93 | 9.8 9.8.1 Second class teak wood 9.8.1.1 35 mm thick sqm 3408.0 9.8.1.2 30 mm thick sqm 3033.0 9.8.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood 9.8.2.1 35 mm thick sqm 2758.0 9.8.2.2 30 mm thick sqm 2474.0 9.8.3 Kiln seasoned selected planks of sheesham wood. 9.8.3.1 35 mm thick sqm 2594.0 9.8.3.2 30 mm thick sqm 2331.0 9.8.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 9. 8.4.1 30 mm thick shutters sqm 1469.0 9. 8.4.2 35 mm thick shutters sqm 1589.0 |
| 94 | 9.1 9.10.1 5 mm thick instead of 4 mm thick. sqm 73.0 9.10.2 10 to 12 mm float glass sqm 132.0 9.10.3 5.5 mm safety glass sqm 400.0 9.10.4 10-12mm safety glass sqm 960.0 |
| 95 | 9.14 9.14.1 Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. sqm 170.0 9.14.2 ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. sqm 53.0 |
| 96 | 9.15 9.15.1 Panelled or panelled and glazed shutters : 9.15.1.1 Using ISI marked anodised aluminium butt hinges with necessary screws. sqm 2736.0 9.15.1.2 Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. sqm 2753.0 9.15.2 Glazed shutters : 9.15.2.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. sqm 2815.0 9.15.2. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. sqm 2759.0 |
| 97 | 9.16 9.16.1 12 mm thick sqm 555.0 9.16.2 18 mm thick sqm 654.0 |
| 98 | 9.17 9.17.1 18 mm thick sqm 1270.0 9.17.2 25 mm thick sqm 1383.0 |
| 99 | 9.18 9.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 2823.0 9.18.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 2648.0 9.18.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. sqm 2465.0 |
| 100 | 9.19 9.19.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 1870.0 9.19.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 1696.0 9.19.3 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. sqm 1623.0 |
| 101 | 9.22 9.22.1 Rectangular or square. sqm 157.0 9.22.2 Circular. sqm 244.0 |
| 102 | 9.25 9.25.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.1.1 Second class teak wood. sqm 3174.0 9.25.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm 2599.0 9.25.1.3 Kiln seasoned selected class of sheesham wood. sqm 2452.0 9.25.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.2.1 Second class teak wood. sqm 3291.0 9.25.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm 2716.0 9.25.2.3 Kiln seasoned selected class of sheesham wood. sqm 2569.0 9.25.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.3.1 Second class teak wood. sqm 2797.0 9.25.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm 2306.0 9.25.3.3 Kiln seasoned selected class of sheesham wood. sqm 2179.0 9.25.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.4.1 Second class teak wood. sqm 2914.0 9.25.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm 2423.0 9.25.4.3 Kiln seasoned selected class of sheesham wood. sqm 2296.0 |
| 103 | 9.26 9.26.1 35 mm thick shutters sqm 2427.0 9.26.2 30 mm thick shutters sqm 2102.0 |
| 104 | 9.28 9.28.1 25 mm long each 16.0 9.28.2 32 mm long each 18.0 9.28.3 40 mm long each 21.0 9.28.4 50 mm long each 25.0 9.28.5 60 mm long each 28.0 |
| 105 | 9.29 9.29.1 40 mm thick. sqm 5407.0 9.29.2 25 mm thick. sqm 3469.0 9.29.3 20 mm thick sqm 2802.0 9.29.4 12 mm thick sqm 1768.0 |
| 106 | 9.3 9.30.1 12 mm thick sqm 1174.0 9.30.2 18 mm thick sqm 1410.0 9.30.3 25 mm thick sqm 1525.0 |
| 107 | 9.34 9.34.1 18 mm thick sqm 1626.0 9.34.2 25 mm thick sqm 1741.0 |
| 108 | 9.35 9.35.1 2nd class teak wood 9.35.1.1 50x12 mm metre 102.0 9.35.1.2 50 x 20 mm metre 147.0 9.35.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.35.2.1 50x12 mm metre 85.0 9.35.2.2 50x20 mm metre 119.0 |
| 109 | 9.39 9.39.1 Non decorative veneer on both sides. metre 34.0 9.39.2 Particle board with decorative veneering on both sides. metre 102.0 |
| 110 | 9.41 9.41.1 12 mm dia. metre 289.0 9.41.2 20 mm dia. metre 377.0 9.41.3 25 mm dia. metre 382.0 |
| 111 | 9.42 9.42.1 20 mm dia (heavy type) metre 127.0 9.42.2 25 mm dia (heavy type) metre 141.0 |
| 112 | 9.43 9.43.1 Fixed to steel windows by welding. Kg 119.0 9.43.2 Fixed to openings /wooden frames with rawl plugs screws etc. Kg 128.0 |
| 113 | 9.46 9.46.1 With 2nd class teak wood beading 62x19 mm. sqm 1000.0 9.46.2 With 12 mm mild steel U beading. sqm 681.0 |
| 114 | 9.49 9.49.1 Sal wood. cum 72600.0 9.49.2 Haldu, Kail, Bija wood. cum 72550.0 |
| 115 | 9.5 9.50.1 125x65x2.12 mm each 30.0 9.50.2 100x58x1.90 mm each 23.0 9.50.3 75x47x1.70 mm each 18.0 9.50.4 50x37x1.50 mm each 10.0 |
| 116 | 9.51 9.51.1 125x90x4.00 mm each 53.0 9.51.2 100x75x3.50 mm each 35.0 9.51.3 75x60x3.10 mm each 21.0 9.51.4 50x40x2.50 mm each 13.0 |
| 117 | 9.52 9.52.1 125x65x2.12 mm each 32.0 9.52.2 100x58x1.90 mm each 23.0 9.52.3 75x47x1.70 mm each 17.0 9.52.4 50x37x1.50 mm each 10.0 |
| 118 | 9.53 9.53.1 150x125x27x2.80 mm each 58.0 9.53.2 125x125x27x2.80 mm each 55.0 9.53.3 100x125x27x2.80 mm each 46.0 9.53.4 75x100x20x2.24 mm each 39.0 |
| 119 | 9.54 9.54.1 150 mm each 169.0 9.54.2 125 mm each 163.0 9.54.3 100 mm each 131.0 |
| 120 | 9.55 9.55.1 150 mm each 174.0 9.55.2 125 mm each 163.0 9.55.3 100 mm each 137.0 |
| 121 | 9.56 9.56.1 Overall width 35 mm. metre 133.0 9.56.2 Overall width 50 mm. metre 138.0 9.56.3 Overall width 65 mm. metre 141.0 |
| 122 | 9.57 9.57.1 300x16 mm each 170.0 9.57.2 250x16 mm each 157.0 |
| 123 | 9.58 9.58.1 250x10 mm each 68.0 9.58.2 200x10 mm each 60.0 9.58.3 150x10 mm each 42.0 9.58.4 100x10 mm each 35.0 |
| 124 | 9.6 9.60.1 300x20x6 mm each 72.0 9.60.2 250x20x6 mm each 67.0 |
| 125 | 9.61 9.61.1 125 mm each 27.0 9.61.2 100 mm each 25.0 9.61.3 75 mm each 24.0 |
| 126 | 9.62 9.62.1 150 mm each 23.0 9.62.2 115 mm each 20.0 9.62.3 90 mm each 17.0 |
| 127 | 9.63 9.63.1 300 mm weighing not less than 200 gms. each 40.0 9.63.2 250 mm weighing not less than 150 gms. each 34.0 9.63.3 200 mm weighing not less than 120 gms. each 28.0 |
| 128 | 9.65 9.65.1 300x16 mm each 389.0 9.65.2 250x16 mm each 326.0 |
| 129 | 9.66 9.66.1 250x10 mm each 148.0 9.66.2 200x10 mm each 93.0 9.66.3 150x10 mm each 71.0 9.66.4 100x10 mm each 50.0 |
| 130 | 9.68 9.68.1 300x20x6 mm each 211.0 9.68.2 250x20x6 mm each 173.0 |
| 131 | 9.69 9.69.1 125 mm each 60.0 9.69.2 100 mm each 54.0 9.69.3 75 mm each 48.0 |
| 132 | 9.7 9.70.1 150 mm each 37.0 9.70.2 115 mm each 33.0 9.70.3 90 mm each 26.0 |
| 133 | 9.71 9.71.1 300 mm weighing not less than 200 gms. each 79.0 9.71.2 250 mm weighing not less than 150 gms. each 61.0 9.71.3 200 mm weighing not less than 120 gms. each 49.0 |
| 134 | 9.73 9.73.1 125x64x1.90 mm each 67.0 9.73.2 100X58X1.90 mm each 59.0 9.73.3 75x47x1.80 mm each 39.0 9.73.4 50x37x1.50 mm each 25.0 |
| 135 | 9.74 9.74.1 125x64x2.50 mm each 76.0 9.74.2 100x60x2.50 mm each 60.0 9.74.3 75x50x2.50 mm each 46.0 |
| 136 | 9.77 9.77.1 125x85x5.5 mm (heavy type) each 456.0 9.77.2 125x70x4 mm (ordinary type) each 148.0 9.77.3 100x85x5.5 mm (heavy type) each 387.0 9.77.4 100x70x4 mm (ordinary type) each 117.0 9.77.5 75x65x4 mm (heavy type) each 145.0 9.77.6 75x40x2.5 mm (ordinary type) each 74.0 9.77.7 50x40x2.5 mm (ordinary type) each 32.0 |
| 137 | 9.78 9.78.1 150x125x27x5 mm each 385.0 9.78.2 125x125x27x5 mm each 345.0 9.78.3 100x125x27x5 mm each 304.0 9.78.4 75x100x20x3.2 mm each 239.0 |
| 138 | 9.79 9.79.1 400x10 mm each 400.0 9.79.2 250x10 mm each 329.0 9.79.3 200x10 mm each 261.0 9.79.4 150x10 mm each 221.0 9.79.5 100x10 mm each 142.0 |
| 139 | 9.8 9.80.1 300x16x5 mm each 237.0 9.80.2 250x16x5 mm each 225.0 |
| 140 | 9.81 9.81.1 125 mm each 205.0 9.81.2 100 mm each 181.0 9.81.3 75 mm each 141.0 |
| 141 | 9.82 9.82.1 300x16mm each 407.0 9.82.2 250x16mm each 374.0 |
| 142 | 9.87 9.87.1 40 mm each 144.0 9.87.2 50 mm each 150.0 9.87.3 65 mm each 162.0 9.87.4 75 mm each 185.0 |
| 143 | 9.91 9.91.1 300 mm weighing not less than 330 gms each 184.0 9.91.2 250 mm weighing not less than 280 gms each 147.0 9.91.3 200 mm weighing not less than 240 gms each 136.0 |
| 144 | 9.92 9.92.1 150 mm each 115.0 9.92.2 115 mm each 94.0 9.92.3 90 mm each 80.0 |
| 145 | 9.99 9.99.1 Size 40 mm each 144.0 9.99.2 Size 50 mm each 156.0 9.99.3 Size 65 mm each 167.0 9.99.4 Size 75 mm each 196.0 |
| 146 | 9.101 9.101.1 300x16mm each 268.0 9.101.2 250x16mm each 245.0 |
| 147 | 9.102 9.102.1 400X10mm each 260.0 9.102.2 300x10mm each 198.0 9.102.3 250x10mm each 164.0 9.102.4 200x10 mm each 113.0 9.102.5 150x10 mm each 91.0 9.102.6 100x10 mm each 73.0 |
| 148 | 9.103 9.103.1 300x16x5mm each 255.0 9.103.2 250x16x5mm each 243.0 |
| 149 | 9.104 |
| 150 | 9.105 9.105.1 125 mm each 241.0 9.105.2 100 mm each 206.0 9.105.3 75 mm each 182.0 |
| 151 | 9.106 |
| 152 | 9.107 9.107.1 300 mm weighing not less than 330 gms each 207.0 9.107.2 250 mm weighing not less than 280 gms each 178.0 9.107.3 200 mm weighing not less than 240 gms each 149.0 |
| 153 | 9.108 9.108.1 125x75x4 mm each 115.0 9.108.2 125x63x4 mm each 108.0 9.108.3 100x75x4 mm each 95.0 9.108.4 100x63x4 mm each 93.0 9.108.5 100x63x3.2 mm each 90.0 9.108.6 75x63x4 mm each 77.0 9.108.7 75x63x3.2 mm each 75.0 9.108.8 75x45x3.2 mm each 67.0 |
| 154 | 9.109 9.109.1 300x16 mm each 241.0 9.109.2 250x16 mm each 195.0 |
| 155 | 9.11 9.110.1 400X10mm each 123.0 9.110.2 300x10 mm each 114.0 9.110.3 250x10 mm each 102.0 9.110.4 200x10 mm each 82.0 9.110.5 150x10 mm each 69.0 9.110.6 100x10 mm each 55.0 |
| 156 | 9.111 |
| 157 | 9.112 |
| 158 | 9.113 9.113.1 125 mm each 75.0 9.113.2 100 mm each 55.0 9.113.3 75 mm each 46.0 |
| 159 | 9.114 9.114.1 Single rubber stopper each 35.0 9.114.2 Twin rubber stopper each 86.0 |
| 160 | 9.115 |
| 161 | 9.116 |
| 162 | 9.117 |
| 163 | 9.118 9.118.1 125x34x24 mm weighing not less than 23 gms. each 44.0 9.118.2 150x34x24 mm weighing not less than 26 gms. each 48.0 |
| 164 | 9.119 9.119.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. each 62.0 9.119.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. each 82.0 |
| 165 | 9.12 9.120.1 152x42x18 mm weighing not less than 60 gms. each 87.0 9.120.2 202x42x18 mm weighing not less than 78 gms. each 106.0 |
| 166 | 9.121 |
| 167 | 9.122 |
| 168 | 9.123 9.123.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.1.1 Second class teak wood. sqm 3583.0 9.123.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm 3008.0 9.123.1.3 Kiln seasoned selected class of sheesham wood. sqm 2862.0 9.123.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.2.1 Second class teak wood. sqm 3700.0 9.123.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm 3125.0 9.123.2.3 Kiln seasoned selected class of sheesham wood. sqm 2979.0 9.123.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.3.1 Second class teak wood. sqm 3206.0 9.123.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm 2715.0 9.123.3.3 Kiln seasoned selected class of sheesham wood. sqm 2589.0 9.123.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.4.1 Second class teak wood. sqm 3323.0 9.123.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm 2832.0 9.123.4.3 Kiln seasoned selected class of sheesham wood. sqm 2706.0 |
| 169 | 9.124 9.124.1 With 2nd class teak wood beading 62x19 mm. sqm 1689.0 9.124.2 With 12 mm mild steel U beading. sqm 1370.0 |
| 170 | 9.125 |
| 171 | 9.126 |
| 172 | 9.127 |
| 173 | 9.128 |
| 174 | 9.129 9.129.1 Triple strip vertical type. each 28.0 9.129.2 Double strip (horizontal type). each 23.0 |
| 175 | 9.131 9.131.1 300mm long each set 209.0 9.131.2 450mm long each set 256.0 9.131.3 500mm long each set 302.0 |
| 176 | 9.132 |
| 177 | 9.133 9.133.1 Marine plywood conforming to IS: 710 sqm 1591.0 9.133.2 Fire retardant plywood conforming to IS: 5509. sqm 1660.0 |
| 178 | 9.134 9.134.1 1.5 mm thick. sqm 851.0 9.134.2 1.0 mm thick. sqm 691.0 |
| 179 | 9.135 |
| 180 | 9.136 9.136.1 With decorative veneering on one side and commercial veneering on other side. sqm 1433.0 9.136.2 With non decorative veneering on both sides. sqm 1322.0 |
| 181 | 9.137 |
| 182 | 9.138 9.138.1 12 mm thick. sqm 919.0 9.138.2 18 mm thick. sqm 1161.0 9.138.3 25 mm thick. sqm 1230.0 |
| 183 | 9.139 |
| 184 | 9.14 9.140.1 18 mm thick sqm 1493.0 9.140.2 25 mm thick sqm 2017.0 |
| 185 | 9.141 9.141.1 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. sqm 1212.0 9.141.2 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. sqm 905.0 9.141.3 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. sqm 1491.0 9.141.4 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. sqm 1212.0 9.141.5 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) sqm 1450.0 9.141.6 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. sqm 1359.0 |
| 186 | 9.142 9.142.1 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. sqm 834.0 9.142.2 12 mm thick Gypsum board conforming to IS: 2095 Part-I. sqm 550.0 9.142.3 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. sqm 675.0 9.142.4 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. sqm 1072.0 9.142.5 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. sqm 760.0 |
| 187 | 9.143 |
| 188 | 9.144 |
| 189 | 9.145 9.145.1 Board 12 mm thick sqm 811.0 9.145.2 Board 18 mm thick sqm 943.0 |
| 190 | 9.146 9.146.1 18 mm thick sqm 1055.0 9.146.2 25 mm thick sqm 1420.0 |
| 191 | 9.147 |
| 192 | 9.148 |
| 193 | 9.149 9.149.1 Wt. 8.20 kg/m2 sqm 1427.0 9.149.2 Wt. 4.2 kg/m2 sqm 1303.0 |
| 194 | 9.15 9.150.1 12mm thick commercial ply conforming to IS: 1328 BWR type. sqm 1210.0 9.150.2 18mm thick commercial ply conforming to IS: 1328 BWR type. sqm 11320.0 |
| 195 | 9.151 |
| 196 | 9.152 |
| 197 | 9.153 |
| 198 | 9.154 |
| 199 | 9.155 9.155.1 Using 8mm thick magnesia block sqm 1578.0 9.155.2 Using10mm thick magnesia block sqm 1868.0 9.155.3 Using12mm thick magnesia block sqm 1984.0 9.155.4 Using12mm thick magnesia block sqm 3320.0 |
| 200 | 9.156 |
| 201 | 9.157 |
| 202 | 9.158 9.158.1 Extruded section Profile size 48x40 mm. metre 203.0 9.158.2 Extruded section Profile size 42x50 mm. metre 208.0 |
| 203 | 9.159 |
| 204 | 9.161 |
| 205 | 9.162 |
| 206 | 9.163 |
| 207 | 9.164 |
| 208 | 9.165 |
| 209 | 9.166 9.166.1 Plain PVC door shutters. sqm 2026.0 9.166.2 Pre laminated PVC door shutters. sqm 2490.0 |
| 210 | 9.167 |
| 211 | 9.168 9.168.1 Non decorative finish. sqm 2026.0 9.168.2 Decorative finish (both side wood grained finish). sqm 2432.0 |
| 212 | 9.169 9.169.1 Single rebate (75 mm X 50 mm) RM 459.0 9.169.2 Single rebate (100 mm X50 mm) RM 720.0 9.169.3 Single or double rebate (125 mm X 65 mm) RM 923.0 |
| 213 | 9.17 9.170.1 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 2250.0 9.170.2 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 3250.0 9.170.3 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 3693.0 9.170.4 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 4135.0 |
| 214 | 9.171 9.171.1 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter sqm 3858.0 9.171.2 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter sqm 4417.0 |
| 215 | 9.172 9.172.1 18 mm thick sqm 2423.65 9.172.2 25 mm thick sqm 3083.95 |
| 216 | 9.173 9.173.1 6 mm thick sqm 800.0 9.173.2 12 mm thick sqm 1300.0 |
| 217 | 9.174 |
| 218 | 9.175 |
| 219 | 9.176 9.176.1 Non decorative finish (matt finish). sqm 2037.0 9.176.2 Decorative finish (wood grained finish). sqm 2142.0 |
| 220 | 9.177 |
| 221 | 9.178 |
| 222 | 9.179 |
| 223 | 9.181 |
| 224 | 9.182 |
| 225 | 9.183 |
| 226 | 9.184 |
| 227 | 9.185 |
| 228 | 9.186 |
| 229 | 9.187 9.187.1 Casement Window (Outward/Inward opening) with hinge System. 9.187.1.1 Frame (50 mm x 50mm) metre 422.0 9.187.1.2 Sash (Style and Rail) (62 mm x 34 mm) metre 403.0 9.187.1.3 Mullion (intermediate Section) (66mm x 50 mm) metre 434.0 9.187.1.4 ‘T\" Profile (one vertical length in between two shutters) (24mm x 34.5mm) metre 99.0 9.187.1.5 Glazing bead (12mm x 18mm) metre 130.0 9.187.2 Casement Window (With friction hinge and outward opening) 9.187.2.1 Casement Frame (67mm x 62mm) metre 495.0 9.187.2.2 Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) metre 519.0 9.187.2.3 Casement Glazing bead (35mm x 18 mm) metre 178.0 9.187.3 Sliding Window (Two Track, 2/4 Shutters) 9.187.3.1 Two Track Sliding Frame (67mm x 52mm) metre 566.0 9.187.3.2 Sliding window Sash (60mm x 44mm) metre 529.0 9.187.3.3 Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) metre 139.0 9.187.3.4 Sliding Glazing bead (35 mm x 18 mm) metre 178.0 9.187.4 Sliding Door (Two Track, 2/4 Shutters) 9.187.4.1 Two Track Sliding Frame (67mm x 52mm) metre 539.0 9.187.4.2 Sliding Door Sash (80mm x 44mm) metre 653.0 9.187.4.3 Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) metre 139.0 9.187.4.4 Sliding Glazing bead (35 mm x 18 mm) metre 178.0 |
| 230 | 9.188 9.188.1 200 x 19 x 1.9 mm each 321.0 9.188.2 250 x 19 x 1.9 mm each 369.0 9.188.3 300 x 19 x 1.9 mm each 462.0 9.188.4 350 x 19 x 1.9 mm each 526.0 9.188.5 400 x 19 x 1.9 mm each 636.0 |
| 231 | 9.189 |
| 232 | 9.191 |
| 233 | 9.192 |
| 234 | 9.193 |
| 235 | 9.194 9.194.1 Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) sqm 6798.0 9.194.2 Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). sqm 6221.0 9.194.3 Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). sqm 4842.0 9.194.4 Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) sqm 6681.0 9.194.5 Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) sqm 6942.0 9.194.6 Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) sqm 5290.0 |
| 236 | 9.195 9.195.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) sqm 4860.0 |
| 237 | 9.196 9.196.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). sqm 7085.0 9.196.2 Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). sqm 7063.0 |
| 238 | 9.197 9.197.1 Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) sqm 5060.0 9.197.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). sqm 6880.0 9.197.3 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). sqm 5134.0 9.197.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). sqm 6371.0 9.197.5 Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) sqm 5913.0 |
| 239 | 9.198 9.198.1 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). sqm 4332.0 9.198.2 Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). sqm 3532.0 |
| 240 | 9.199 9.199.1 Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). sqm 3676.0 9.199.2 Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). sqm 3810.0 9.199.3 Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) sqm 4361.0 9.199.4 Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) sqm 5617.0 |
| 241 | 9.201 9.201.1 24 to 25 mm thick plain solid PVC flush door shutter sqm 2250.0 9.201.2 28 to 30 mm thick plain solid PVC flush door shutter sqm 3229.0 |
| 242 | 9.202 9.202.1 1mm thick laminated sheet sqm 3693.0 9.202.2 0.12 mm thick laminated sheet sqm 3461.0 |
| 243 | 9.203 9.203.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. sqm 3339.0 9.203.2 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. sqm 3171.0 9.203.3 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. sqm 3005.0 |
| 244 | 9.204 9.204.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. sqm 1953.0 9.204.2 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. sqm 1772.0 9.204.3 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. sqm 1532.0 |
| 245 | 9.205 |
| 246 | 9.206 9.206.1 Acrylic Solid Surface sheet – Glacier white designer white 9.206.1.1 6 mm thick sheet sqm 5920.0 9.206.1.2 12 mm thick sheet sqm 7212.0 9.206.2 Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 9.206.2.1 6 mm thick sheet sqm 6512.0 9.206.2.2 12 mm thick sheet sqm 8826.0 9.206.3 Acrylic Solid Surface sheet - Any other 9.206.3.1 6 mm thick sheet sqm 7550.0 9.206.3.2 12 mm thick sheet sqm 9960.0 |
| 247 | 9.207 |
| 248 | 9.208 9.208.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm 3366.0 9.208.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm 3268.0 9.208.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. sqm 3056.0 |
| 249 | 9.209 9.209.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm 2175.0 9.209.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws sqm 2075.0 9.209.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. sqm 1975.0 |
| 250 | 9.21 9.210.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm 3789.0 9.210.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm 3643.0 |
| 251 | 9.211 9.211.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm 4483.0 9.211.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm 4269.0 |
| 252 | 9.212 9.212.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm 4350.0 9.212.2 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm 4150.0 9.212.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. sqm 3950.0 |
| 253 | 9.213 9.213.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm 2775.0 9.213.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm 2675.0 9.213.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. sqm 2575.0 |
| 254 | 9.214 9.214.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm 2775.0 9.214.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm 2675.0 9.214.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. sqm 2575.0 |
| 255 | 9.215 9.215.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm 3650.0 9.215.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm 3550.0 9.215.3 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. sqm 3450.0 |
| 256 | 9.216 9.216.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm 3121.0 9.216.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm 3021.0 9.216.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. sqm 2921.0 |
| 257 | 9.217 |
| 258 | 9.218 |
| 259 | 10.5 40299.0 Using M.S. angels 40x40x6mm for diagonal braces sqm 2604.0 40300.0 Using flats 30x6mm for diagonal braces and central cross piece. sqm 2474.0 |
| 260 | 10.6 40330.0 80x1.25mm M.S. laths with 1.25 mm thick top cover. sqm 2200.0 40331.0 80x1.20 mm M.S. laths with 1.20 mm thick top cover. sqm 1850.0 40332.0 80x0.90 mm M.S. laths with 0.90 mm thick top cover. sqm 1716.0 |
| 261 | 10.7 40360.0 Exceeding 10.00 sqm and upto 16.80 sqm in the area. sqm 747.0 40361.0 Exceeding 16.80 sqm in area. sqm 782.0 |
| 262 | 10.1 40452.0 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). kg 107.0 40453.0 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). kg 93.0 40454.0 Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. meter 36.0 |
| 263 | 10.11 40484.0 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). kg 77.0 |
| 264 | 10.12 40513.0 Profile B of 1.60mm thick single rebate of size 80mmx50mm 10.12.1.1 Fixing with adjustable lugs with split end tail to each jamb. meter 402.0 10.12.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 394.0 40514.0 Profile C of 1.60mm thick single rebate of size 100mmx50mm 10.12.2.1 Fixing with adjustable lugs with split end tail to each jamb. meter 431.0 10.12.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 424.0 40515.0 Profile E of 1.60mm thick double rebate of size 115mmx50mm 10.12.3.1 Fixing with adjustable lugs with split end tail to each jamb. meter 472.0 10.12.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 464.0 40516.0 Profile B of 1.25mm thick single rebate of size 80mmx50mm 10.12.4.1 Fixing with adjustable lugs with split end tail to each jamb. meter 356.0 10.12.4.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 348.0 40517.0 Profile C of 1.25mm thick single rebate of size 100mmx50mm 10.12.5.1 Fixing with adjustable lugs with split end tail to each jamb. meter 385.0 10.12.5.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 377.0 40518.0 Profile E of 1.25mm thick double rebate of size 115mmx50mm 10.12.6.1 Fixing with adjustable lugs with split end tail to each jamb. meter 414.0 10.12.6.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 406.0 |
| 265 | 10.13 10.13.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). kg 116.2 10.13.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). kg 114.8 |
| 266 | 10.14 10.14.1 Hot finished welded type tubes kg 117.0 10.14.2 Hot finished seamless type tubes kg 123.0 10.14.3 Electric resistance or induction butt welded tubes. kg 142.0 |
| 267 | 10.15 |
| 268 | 10.16 |
| 269 | 10.17 |
| 270 | 10.18 |
| 271 | 10.19 |
| 272 | 10.21 |
| 273 | 10.22 10.22.1 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. kg 101.0 10.22.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg 105.0 |
| 274 | 10.23 10.23.1 M.S. tube. kg 117.0 10.23.2 E.R.W. tubes. kg 132.0 |
| 275 | 10.24 10.24.1 10x60 mm each 57.0 10.24.2 10x80 mm each 63.0 10.24.3 10x120 mm each 78.0 10.24.4 10x140 mm each 84.0 10.24.5 10x160mm each 110.0 |
| 276 | 10.25 |
| 277 | 10.26 10.26.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides sqm 646.0 10.26.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. sqm 1334.0 |
| 278 | 10.27 10.27.1 With 4.0 mm thick glass panes sqm 792.0 10.27.2 With 5.50 mm thick glass panes sqm 873.0 10.27.3 With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. sqm 916.0 10.27.4 With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. sqm 611.0 10.27.5 With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. sqm 936.0 10.27.6 With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 750.0 10.27.7 With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 800.0 10.27.8 With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 872.0 |
| 279 | 10.28 10.28.1 With 4.0 mm thick glass panes. sqm 259.0 10.28.2 With 5.5 mm thick glass panes. sqm 262.0 |
| 280 | 10.29 10.29.1 R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). cum 16510.0 10.29.2 Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) kg 67.0 10.29.3 Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). kg 81.0 |
| 281 | 10.31 |
| 282 | 10.32 |
| 283 | 10.33 |
| 284 | 10.34 10.34.1 Made of G.I. wire. kg 133.0 10.34.2 Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. kg 138.0 |
| 285 | 10.35 |
| 286 | 10.36 |
| 287 | 10.37 |
| 288 | 10.38 10.38.1 Openable window sqm 5228.0 10.38.2 Fixed windows sqm 4190.0 |
| 289 | 10.39 10.39.1 Openable single rebate window sqm 4511.0 10.39.2 Fixed single rebate window sqm 3894.0 |
| 290 | 10.4 10.40.1 Openable double rebate window sqm 5820.0 10.40.2 Fixed double rebate window sqm 4449.0 |
| 291 | 10.41 |
| 292 | 10.42 |
| 293 | 10.43 |
| 294 | 11.7 40725.0 Dark shade pigment with ordinary cement. sqm 493.0 40726.0 Light shade pigment with white cement. sqm 550.0 40727.0 Medium shade pigment with 50% white cement and 50% ordinary cement. sqm 521.0 40728.0 White cement without any pigment. sqm 511.0 40729.0 Light shade pigment with ordinary cement. sqm 499.0 40730.0 Ordinary cement without any pigment. sqm 468.0 |
| 295 | 11.8 40756.0 Dark shade pigment with Ordinary cement. sqm 526.0 40757.0 Light shade pigment with white cement. sqm 607.0 40758.0 Medium shade pigment with 50% white cement and 50% ordinary cement. sqm 566.0 40759.0 White cement without any pigment. sqm 570.0 40760.0 Light shade pigment with ordinary cement. sqm 532.0 40761.0 Ordinary cement without any pigment. sqm 493.0 |
| 296 | 11.9 40787.0 Dark shade pigment with ordinary cement. sqm 563.0 40788.0 Light shade pigment with white cement. sqm 677.0 40789.0 Medium shade pigment with 50% white cement and 50% ordinary cement. sqm 620.0 40790.0 White cement without any pigment. sqm 620.0 40791.0 Light shade pigment with ordinary cement. sqm 576.0 40792.0 Ordinary cement without any pigment. sqm 519.0 |
| 297 | 11.1 40817.0 Dark shade pigment with ordinary cement. sqm 572.0 40818.0 Light shade pigment with white cement. sqm 629.0 40819.0 Medium shade pigment with 50% white cement and 50% ordinary cement. sqm 601.0 40820.0 White cement without any pigment. sqm 602.0 40821.0 Light shade pigment with ordinary cement. sqm 579.0 40822.0 Ordinary cement without any pigment. sqm 549.0 |
| 298 | 11.11 |
| 299 | 11.12 |
| 300 | 11.13 |
| 301 | 11.14 11.14.1 Light shade using white cement. sqm 813.0 11.14.2 Medium shade using 50%white cement and 50% ordinary cement. sqm 756.0 11.14.3 Dark shade using ordinary cement. sqm 700.0 11.14.4 Ordinary cement without any pigment. sqm 700.0 |
| 302 | 11.15 |
| 303 | 11.16 11.16.1 Light shade pigment using white cement. sqm 954.0 11.16.2 Medium shades pigment using 50% white cement and 50% ordinary cement. sqm 883.0 11.16.3 Dark shade pigment using ordinary cement. sqm 811.0 11.16.4 Ordinary cement without any pigment. sqm 750.0 |
| 304 | 11.17 11.17.1 Light shade pigment using white cement. sqm 889.0 11.17.2 Medium shade pigment using 50% white cement, 50% ordinary cement. sqm 807.0 11.17.3 Dark shade pigment using ordinary cement. sqm 732.0 11.17.4 Ordinary cement without any pigment. sqm 686.0 |
| 305 | 11.18 11.18.1 Light shade pigment using white cement. sqm 754.0 11.18.2 Medium shade pigment using 50% white cement 50% Grey cement. sqm 669.0 11.18.3 Dark shade pigment using ordinary cement. sqm 591.0 11.18.4 Ordinary cement without any pigment. sqm 535.0 |
| 306 | 11.19 11.19.1 Makrana white second quality. sqm 3051.0 11.19.2 Raj Nagar plain. sqm 1381.0 11.19.3 Agaria White/Morgarh sqm 1882.0 11.19.4 Katni marble sqm 1555.0 11.19.5 Black Zebra. sqm 1315.0 11.19.6 Udaipur / Baroda green marble sqm 1649.0 11.19.7 Pink plain marble. sqm 1448.0 11.19.8 Jaisalmer Yellow sqm 1582.0 |
| 307 | 11.2 11.20.1 Makrana white second quality. sqm 3675.0 11.20.2 Raj Nagar plain. sqm 1932.0 11.20.3 Agaria White/Morgarh sqm 2455.0 11.20.4 Katni marble sqm 2113.0 11.20.5 Black Zebra. sqm 1863.0 11.20.6 Udaipur / Baroda green marble sqm 2211.0 11.20.7 Pink plain marble. sqm 2002.0 11.20.8 Jaisalmer Yellow sqm 2141.0 |
| 308 | 11.21 11.21.1 Makrana white second quality. sqm 3773.0 11.21.2 Raj Nagar plain. sqm 2737.0 11.21.3 Agaria White/Morgarh sqm 2553.0 11.21.4 Katni marble sqm 2219.0 11.21.5 Black Zebra. sqm 1961.0 11.21.6 Udaipur / Baroda green marble sqm 2309.0 11.21.7 Pink plain marble. sqm 2100.0 11.21.8 Jaisalmer Yellow sqm 2240.0 |
| 309 | 11.22 11.22.1 Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black sqm 1797.0 11.22.2.1 Granite fine grained dark crystal of other colours and various patterns sqm 2356.0 11.22.2.2 Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Sqm 2113.0 11.22.2.3 Granite grey/pink/brown with various patterns Sqm 1808.0 11.22.3 Cuddpah stone sqm 1279.0 |
| 310 | 11.23 |
| 311 | 11.24 |
| 312 | 11.25 |
| 313 | 11.26 |
| 314 | 11.27 |
| 315 | 11.28 11.28.1 Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. sqm 7748.0 |
| 316 | 11.29 111.29.1 Area of slab over 0.50 sqm 11.29.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2919.0 11.29.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2675.0 11.29.1.3 Gray/Pink/Brown or equivalent with various patterns sqm 2370.0 11.29.2 Area of slab upto 0.50 sqm 11.29.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2705.0 11.29.2.2 Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2486.0 11.29.2.3 Gray/Pink/Brown or equivalent with various patterns sqm 2212.0 |
| 317 | 11.3 11.30.1 Area of slab over 0.50 sqm 11.30.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2642.0 11.30.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2422.0 11.30.1.3 Gray/Pink/Brown or equivalent with various patterns sqm 2153.0 11.90.2 Area of slab upto 0.50 sqm 11.30.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2455.0 11.30.2.2 Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2258.0 11.30.2.3 Gray/Pink/Brown or equivalent with various patterns sqm 2011.0 |
| 318 | 11.31 11.31.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 3616.0 11.31.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 3250.0 11.31.3 Gray/Pink/Brown or equivalent with various patterns sqm 2793.0 |
| 319 | 11.32 |
| 320 | 11.33 11.33.1 Flamed Finish Polish sqm 2542.0 11.33.2 Leather Finish Polish sqm 2809.0 |
| 321 | 11.34 |
| 322 | 11.35 |
| 323 | 11.36 |
| 324 | 11.37 |
| 325 | 11.38 |
| 326 | 11.38.1 11.38.2 20 mm thick sqm 1231.0 |
| 327 | 11.39 |
| 328 | 11.4 11.40.1 Marble work meter 164.0 11.40.2 Granite work. meter 269.0 |
| 329 | 11.41 |
| 330 | 11.42 |
| 331 | 11.43 |
| 332 | 11.44 11.44.1 Red sand stone sqm 578.0 11.44.2 White sand stone sqm 578.0 11.44.3 Grey lime stone sqm 578.0 11.44.4 Kota stone sqm 678.0 |
| 333 | 11.45 11.45.1 Red sand stone sqm 642.0 11.45.2 White sand stone sqm 642.0 |
| 334 | 11.46 11.46.1 Red sand stone sqm 709.0 11.46.2 White sand stone sqm 709.0 |
| 335 | 11.47 |
| 336 | 11.48 |
| 337 | 11.49 |
| 338 | 11.51 |
| 339 | 11.52 |
| 340 | 11.53 |
| 341 | 11.54 |
| 342 | 11.55 |
| 343 | 11.56 |
| 344 | 11.57 |
| 345 | 11.58 |
| 346 | 11.59 |
| 347 | 11.60.1 |
| 348 | 11.60.2 |
| 349 | 11.61 11.61.1 Marble tiles (polished) Raj Nagar. sqm 1119.0 11.61.2 Granite tile of any colour /shade sqm 1524.0 |
| 350 | 11.62 11.62.1 Gunmetal cramps. kg 589.0 11.62.2 Stainless steel cramps. kg 631.0 |
| 351 | 11.63 11.63.1 Fastener with threaded dia 6 mm. each 25.0 11.63.2 Fastener with threaded dia 10 mm. each 29.0 11.63.3 Fastener with threaded dia 12 mm. each 46.0 |
| 352 | 11.64 11.64.1 White Agaria Marble Stone. sqm 3046.0 11.64.2 Granite Stone of approved shade. sqm 3422.0 |
| 353 | 11.65 11.65.1 300 mm Finished Floor Height (FFH) sqm 4002.0 11.65.2 450 mm Finished Floor Height (FFH). sqm 4044.0 |
| 354 | 11.66 |
| 355 | 11.67 11.67.1 1 mm thick sqm 1198.0 11.67.2 2 mm thick sqm 1825.0 11.67.3 3 mm thick sqm 2452.0 |
| 356 | 11.68 |
| 357 | 11.69 |
| 358 | 11.71 11.71.1 100 mm thick sqm 480.0 11.71.2 200mm thick sqm 960.0 |
| 359 | 11.72 11.72.1 80 mm thick C.C. paver block of M-35 grade sqm 805.0 11.72.2 60 mm thick C.C. paver block of M-35 grade sqm 680.0 11.72.3 60 mm thick C.C. paver block of M-30 grade sqm 605.0 |
| 360 | 11.73 |
| 361 | 11.74 |
| 362 | 11.75 11.75.1 Granite Door frame for 100mm thick wall Thickness. metre 1010.0 11.75.2 Granite Door frame for 200mm thick wall Thickness. metre 1512.0 |
| 363 | 11.76 11.76.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm sqm 950.0 11.76.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm sqm 1033.0 |
| 364 | 11.77 11. 77.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm sqm 940.0 11. 77.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm sqm 1022.0 |
| 365 | 11.78 11. 78.1 In light shade glossy/ rustic /stain finished 11. 78.1.1 Size 600X600 mm thickness 9-10 mm sqm 1104.0 11. 78.1.2 Size 800X800mm thickness 11-12mm sqm 1223.0 11. 78.1.3 Size 800X1200 mm thickness 11-12mm sqm 1413.0 11. 78.2 In dark shade glossy/ rustic /stain finished 11. 78.2.1 (a) Size 600X600 mm thickness 9-10 mm sqm 1169.0 11. 78.2.2 (b) Size 800X800mm thickness 11-12mm sqm 1295.0 11. 78.2.3 (c) Size 800X1200 mm thickness 11-12mm sqm 1521.0 |
| 366 | 11.79 11. 79.1 In light shade glossy/ rustic /stain finished 11. 79.1.1 (a) Size 600X600 mm thickness 9-10 mm sqm 1093.0 11. 79.1.2 (b) Size 800X800mm thickness 11-12mm sqm 1212.0 11. 79.1.3 (c) Size 800X1200 mm thickness 11-12mm sqm 1403.0 11. 79.2 In dark shade glossy/rustic/stain finished 11. 79.2.1 (a) Size 600X600 mm thickness 9-10 mm sqm 1159.0 11. 79.2.2 (b) Size 800X800mm thickness 11-12mm sqm 1284.0 11. 79.2.3 (c) Size 800X1200 mm thickness 11-12mm sqm 1510.0 |
| 367 | 11.8 11. 80.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 80.1.1 (a) Size 300X300 mm thickness 9-10 mm sqm 934.0 11. 80.1.2 (b) Size 600X600mm thickness 9-10mm sqm 1206.0 11. 80.1.3 (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm 1349.0 11. 80.2 In dark colour and shade etc. 11. 80.2.1 (a) Size 300X300 mm thickness 9-10 mm sqm 946.0 11. 80.2.2 (b) Size 600X600mm thickness 9-10mm sqm 1340.0 11. 80.2.3 (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm 1546.0 |
| 368 | 11.81 11. 81.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 81.1.1 (a) Size 300X300 mm thickness 9-10 mm sqm 923.0 11. 81.1.2 (b) Size 600X600mm thickness 9-10mm sqm 1196.0 11. 81.2 In dark colour and shades etc. 11. 81.2.1 (a) Size 300X300 mm thickness 9-10 mm sqm 935.0 11. 81.2.2 (b) Size 600X600mm thickness 9-10mm sqm 1329.0 |
| 369 | 11.82 11. 82.1 For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) 11. 82.1.1 Size 600X600 mm thickness 9-10 mm sqm 1140.0 11. 82.1.2 Size 800X800mm thickness 11-12mm sqm 1261.0 11.82.1.3 Size 800X1600 mm thickness 11-12mm sqm 1484.0 11.82.1.4 Size 1000X1000 mm thickness 11-12mm sqm 1388.0 11. 82.1.5 Size 600X1200 mm thickness 11-12mm sqm 1235.0 11. 82.1.6 Size 800X1200 mm thickness 11-12mm sqm 1450.0 11. 82.1.7 Size 1200X1200 mm thickness 11-12mm sqm 1596.0 11.82.1.8 Size 1200X1800 mm thickness 11-12mm sqm 1715.0 11.82.1.9 Size 1200X2400 mm thickness 11-12mm sqm 2403.0 11. 82.2 For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm sqm 968.0 11. 82.3 For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm sqm 1048.0 |
| 370 | 11.83 11. 83.1 For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades 11. 83.1.1 Size 600X600 mm thickness 9-10 mm sqm 1129.0 11. 83.1.2 Size 800X800mm thickness 11-12mm sqm 1250.0 11. 83.1.3 Size 600X1200 mm thickness 11-12mm sqm 1224.0 11. 83.1.4 Size 800X1200 mm thickness 11-12mm sqm 1440.0 |
| 371 | 11.84 11. 84.1 Area of tiles not less 0.18 sqm 11. 84.1.1 Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter sqm 2296.0 11. 84.1.2 Course granite light Black/light Red/ off White with crystals of other colors and various patterns sqm 2113.0 11. 84.1.3 Gray/Pink/Brown with various patterns sqm 1879.0 |
| 372 | 11.85 11. 85.1 Area of tiles not less 0.18 sqm 11. 85.1.1 Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter sqm 1775.0 11. 85.1.2 Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns sqm 1610.0 11. 85.1.3 Gray/Pink/Brown with various patterns sqm 1404.0 |
| 373 | 11. 86 11. 86.1 Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. sqm 2265.0 11. 86.2 Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. sqm 2656.0 |
| 374 | 11.87 |
| 375 | 11.88 |
| 376 | 11.89 |
| 377 | 11.91 11. 91.1 300x300mm sqm 1182.0 11. 91.2 400x400mm sqm 1207.0 11. 91.3 600x600mm sqm 1328.0 |
| 378 | 11.92 |
| 379 | 12.1 40909.0 1.00mm thick with zinc coating not less than 275gm/m² sqm 1025.0 40910.0 0.80mm thick with zinc coating not less than 275gm/m² sqm 863.0 40911.0 0.63 mm thick with zinc coating not less than 275gm/m² sqm 726.0 |
| 380 | 12.4 41000.0 0.80mm thick with zinc coating not less than 275gm/m² meter 500.0 41001.0 0.63mm thick with zinc coating not less than 275gm/m² meter 431.0 |
| 381 | 12.7 41091.0 0.80mm thick with zinc coating not less than 275gm/m² meter 459.0 41092.0 0.63mm thick with zinc coating not less than 275gm/m² meter 402.0 |
| 382 | 12.11 |
| 383 | 12.12 41244.0 Corrugated serrated adjustable ridges meter 367.0 41245.0 Plain wing adjustable ridges meter 311.0 41246.0 Close fitting adjustable ridges meter 420.0 41247.0 Unserrated adjustable hips meter 506.0 |
| 384 | 12.13 12.13.1 Corrugated apron pieces meter 340.0 12.13.2 Eave\"s filler pieces meter 232.0 12.13.3 North light curves meter 500.0 12.13.4 ventilator curves meter 622.0 12.13.5 Barge boards meter 623.0 12.13.6 Ridge finials pair 229.0 12.13.7 Special north light curves each 753.0 12.13.8 S type louvers meter 418.0 |
| 385 | 12.14 |
| 386 | 12.15 |
| 387 | 12.16 12.16.1 Ridges plain (500 - 600mm). meter 320.0 12.16.2 Flashings/ Aprons.( Upto 600 mm) meter 284.0 12.16.3 North light curves. meter 341.0 12.16.4 Barge board (Upto 300 mm) meter 274.0 12.16.5 Crimp curve sqm 315.0 12.16.6 Gutter. (600 mm over all girth) meter 781.0 |
| 388 | 12.17 12.17.1 2mm thick corrugated (2.5\" or 4.2\" or 6\") or step-down (2\"or 3\"or 6\") as specified. sqm 1031.0 12.17.2 2mm thick flat. sqm 955.0 |
| 389 | 12.18 12.18.1 10mm thick sqm 3105.0 12.18.2 16mm thick sqm 3546.0 |
| 390 | 12.19 12.19.1 Red sand stone slab sqm 441.0 12.19.2 White sand stone slab : sqm 504.0 |
| 391 | 12.21 |
| 392 | 12.22 |
| 393 | 12.23 |
| 394 | 12.24 |
| 395 | 12.25 |
| 396 | 12.26 |
| 397 | 12.27 |
| 398 | 12.28 12.28.1 100 mm diameter each 107.0 12.28.2 150 mm diameter each 112.0 |
| 399 | 12.29 12.29.1 100 mm dia minimum wall thickness 5mm meter 871.0 12.29.2 150 mm dia minimum wall thickness 5mm meter 1081.0 |
| 400 | 12.3 12.30.1 100 mm dia. Pipe each 221.0 12.30.2 150 mm dia. Pipe each 309.0 |
| 401 | 12.31 12.31.1 Sand cast iron bend : 12.31.1.1 100 mm diameter each 470.0 12.31.1.2 150 mm diameter each 383.0 12.31.2 Sand cast iron plain shoes : 12.31.2.1 100 mm diameter each 488.0 12.31.2.2 150 mm diameter each 412.0 |
| 402 | 12.32 12.32.1 75 mm diameter (minimum wall thickness 1.8mm) metre 136.0 12.32.2 110 mm diameter (minimum wall thickness 2.2mm) metre 238.0 |
| 403 | 12.33 12.33.1 Coupler 12.33.1.1 75 mm (minimum wall thickness 1.8mm) each 67.0 12.33.1.2 110 mm (minimum wall thickness 2.2mm) each 102.0 12.33.2 Single push fit Coupler : 12.33.2.1 75 mm (minimum wall thickness 1.8mm) each 121.0 12.33.2.2 110 mm (minimum wall thickness 2.2mm) each 94.0 12.33.3 Single tee with door 12.33.3.1 75x75x75 mm (minimum wall thickness 1.8mm) each 106.0 12.33.3.2 110x110x110 mm (minimum wall thickness 2.2mm) each 176.0 12.33.4 Single tee without door 12.33.4.1 75x75x75 mm (minimum wall thickness 1.8mm) each 106.0 12.33.4.2 110x110x110 mm (minimum wall thickness 2.2mm) each 163.0 12.33.5 Bend 87.5° 12.33.5.1 75 mm bend (minimum wall thickness 1.8mm) each 78.0 12.33.5.2 110 mm bend (minimum wall thickness 2.2mm) each 112.0 12.33.6 Shoe (Plain) 12.33.6.1 75 mm Shoe (minimum wall thickness 1.8mm) each 69.0 12.33.6.2 110 mm Shoe (minimum wall thickness 2.2mm) each 99.0 |
| 404 | 12.34 12.34.1 75 mm (minimum wall thickness 1.8mm) each 97.0 12.34.2 110 mm (minimum wall thickness 2.2mm) each 114.0 |
| 405 | 12.35 |
| 406 | 12.36 |
| 407 | 12.37 12.37.1 Stone ware spout each 72.0 12.37.2 Upvc spout (Pipe dia.110 mm) each 38.0 |
| 408 | 12.38 12.38.1 Base metal thickness 0.8mm up to span 15 meter sqm 1698.0 12.38.2 Base metal thickness 0.9mm , up to span 18 meter sqm 1828.0 12.38.3 Base metal thickness 1.0 mm, up to span 21 meter sqm 1931.0 12.38.4 Base metal thickness 1.1 mm, up to span 23 meter sqm 2042.0 12.38.5 Base metal thickness 1.2mm, up to span 25meter sqm 2152.0 12.38.6 Base metal thickness 1.3 mm, up to span 27 meter sqm 2256.0 12.38.7 Base metal thickness 1.4mm, up to span 29meter sqm 2378.0 12.38.8 Base metal thickness 1.5 mm, up to span 31 meter sqm 2475.0 12.38.9 Base metal thickness 1.6 mm, up to span 33 meter sqm 2585.0 12.38.10 Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. each 55.0 12.38.11 Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. each 9196.0 12.38.12 Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. sqm 3400.0 |
| 409 | 12.39 |
| 410 | 12.41 |
| 411 | 12.42 |
| 412 | 12.43 |
| 413 | 12.44 |
| 414 | 12.44.1 |
| 415 | 12.44.2 |
| 416 | 12.45 |
| 417 | 12.46 |
| 418 | 12.47 |
| 419 | 12.48 |
| 420 | 12.49 |
| 421 | 12.51 |
| 422 | 12.52 |
| 423 | 12.53 |
| 424 | 12.54 |
| 425 | 12.55 12.55.1 Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. sqm 335.0 12.55.2 Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. sqm 467.0 12.55.3 Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. sqm 480.0 |
| 426 | 12.56 |
| 427 | 12.57 |
| 428 | 12.58 12.58.1 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board 12.58.1.1 Flat surfaces sqm 676.0 12.58.1.2 Curved surfaces Sqm 748.0 12.58.1.3 Sunk or raised mouldings sqm 175.0 12.58.1.4 Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. sqm per mtr height 59.0 12.58.2 12.5 mm thick tapered edge gypsum board 12.58.2.1 Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). sqm 750.0 12.58.2.2 Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) sqm 866.0 12.58.2.3 Gypsum moisture resistant board. sqm 920.0 12.58.2.4 Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer\"s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. sqm 1277.0 12.58.3 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. sqm 1150.0 |
| 429 | 12.59 12.59.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. sqm 1431.0 12.59.2 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. sqm 1553.0 12.59.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. sqm 1004.0 12.59.4 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. sqm 1164.0 12.59.5 Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. sqm 1861.0 12.59.6 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. sqm 666.0 12.59.7 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. sqm 460.0 |
| 430 | 12.6 12.60.1 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. sqm 1500.0 12.60.2 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. sqm 1628.0 |
| 431 | 12.61 |
| 432 | 12.62 12.62.1 12mm thick insulating board 12.62.1.1 Natural colour insulating board sqm 550..00 12.62.1.2 White face insulating board sqm 614.0 12.62.1.3 Flame retardant face insulating board sqm 700.0 12.62.2 Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete sqm 633.0 12.62.3 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete sqm 428.0 12.62.4 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) sqm 530.0 12.62.5 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns sqm 403.0 |
| 433 | 12.63 |
| 434 | 12.64 |
| 435 | 12.65 |
| 436 | 12.66 |
| 437 | 12.67 |
| 438 | 12.68 12.68.1 With Type N - Normal 50 mm thick sqm 230.0 12.68.2 With Type SE - Self Extinguishing type 50 mm thick sqm 270.0 |
| 439 | 12.69 12.69.1 costing upto 70/- per metre, sqm 97.0 12.69.2 Rs 70- 150 per meter sqm 170.0 12.69.3 Upto 200 per meter sqm 225.0 |
| 440 | 12.7 12.70.1 With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick sqm 3166.0 12.70.2 With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick sqm 2562.0 12.70.3 With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick sqm 2538.0 |
| 441 | 12.71 |
| 442 | 12.72 12.72.1 Standard White / Natural Satin Shade sqm 2989.0 12.72.2 Wooden Finish sqm 3855.0 |
| 443 | 12.73 12.73.1 Tile of 600 mm wide ,600 mm long and 0.5 mm thick sqm 2321.0 12.73.2 Plank of 600mm wide ,1200 mm long and 0.6mm thick sqm 2377.0 |
| 444 | 12.74 |
| 445 | 12.75 |
| 446 | 12.76 |
| 447 | 12.77 |
| 448 | 12.78 |
| 449 | 12.79 |
| 450 | 12.81 12.81.1 With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. sqm 1210.0 12.81.2 With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. sqm 1307.0 |
| 451 | 12.82 |
| 452 | 12.83 |
| 453 | 12.84 |
| 454 | 12.85 12.85.1 With precontraint tensile membrane 1050 GSM (20 years Warranty) sqm 9347.0 12.85.2 With precontraint tensile membrane 1050 GSM (15 Years warranty) sqm 8151.0 |
| 455 | 13.1 41275.0 1:4 (1 cement : 4 sand) sqm 173.0 41276.0 1:6 (1 cement : 6 sand) sqm 160.0 |
| 456 | 13.2 41306.0 1:4 (1 cement : 4 sand) sqm 184.0 41307.0 1:6 (1 cement : 6 sand) sqm 168.0 |
| 457 | 13.3 41334.0 1:4 (1 cement : 4 sand) sqm 245.0 41335.0 1:6 (1 cement : 6 sand) sqm 225.0 |
| 458 | 13.4 41365.0 1:3 (1 cement : 3 sand) sqm 210.0 41366.0 1:4 (1 cement : 4 sand) sqm 203.0 |
| 459 | 13.5 41395.0 1:3 (1 cement : 3 sand) sqm 236.0 41396.0 1:4 (1 cement : 4 sand) sqm 220.0 |
| 460 | 13.11 |
| 461 | 13.12 |
| 462 | 13.13 |
| 463 | 13.14 |
| 464 | 13.15 13.15.1 Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof sqm 34.0 13.15.2 Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof sqm 22.0 |
| 465 | 13.16 13.16.1 In one coat sqm 11.0 13.16.2 In two coats sqm 18.0 |
| 466 | 13.17 13.17.1 In one coat sqm 158.0 13.17.2 In two coats sqm 260.0 |
| 467 | 13.18 13.18.1 Spherical ceiling sqm 42.0 13.18.2 Groined ceiling sqm 47.0 13.18.3 Flewing soffits sqm 28.0 |
| 468 | 13.19 |
| 469 | 13.21 |
| 470 | 13.22 |
| 471 | 13.23 |
| 472 | 13.24 |
| 473 | 13.25 |
| 474 | 13.26 |
| 475 | 13.27 |
| 476 | 13.27.1 13.27.2 Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. Sqm 45.00 |
| 477 | 13.28 13.28.1 Flush Band cm per m 2.0 13.28.2 Sunk Band cm per m 2.0 13.28.3 Raised Band cm per m 2.0 13.28.4 Moulded Band cm per m 4.0 |
| 478 | 13.29 13. 29.1 Flush Band cm per m 2.0 13. 29.2 Sunk Band cm per m 3.0 13. 29.3 Raised Band cm per m 3.0 13. 29.4 Moulded Band cm per m 5.0 |
| 479 | 13.31 13.31.1 Flush / Ruled/ Struck or weathered pointing. sqm 70.0 13.31.2 Raised and cut pointing sqm 112.0 13.31.3 Sunk pointing sqm 89.0 |
| 480 | 13.32 13.32.1 Flush/ Ruled pointing sqm 96.0 13.32.2 Raised and cut pointing sqm 172.0 |
| 481 | 13.33 |
| 482 | 13.34 |
| 483 | 13.35 |
| 484 | 13.36 |
| 485 | 13.37 13.37.1 size 1200mmx1800mm each 7436.0 13.37.2 size 1200mmx2400mm each 9730.0 13.37.3 size 1200mmx3000mm each 12126.0 |
| 486 | 13.38 |
| 487 | 13.39 |
| 488 | 13.41 |
| 489 | 13.42 |
| 490 | 13.43 |
| 491 | 13.44 |
| 492 | 13.45 |
| 493 | 13.46 |
| 494 | 13.47 13.47.1 One coat. sqm 20.0 13.47.2 Two coats. sqm 32.0 |
| 495 | 13.48 13.48.1 One coat. sqm 37.0 13.48.2 Two coats. sqm 56.0 |
| 496 | 13.49 |
| 497 | 13.51 |
| 498 | 13.52 |
| 499 | 13.53 |
| 500 | 13.54 13.54.1 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture sqm 69.0 13.54.2 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. sqm 71.0 13.54.3 Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. sqm 81.0 |
| 501 | 13.55 13.55.1 One coat sqm 63.0 13.55.2 Two coats sqm 101.0 |
| 502 | 13.56 13.56.1 On steel work sqm 109.0 13.56.2 On concrete work sqm 113.0 |
| 503 | 13.57 |
| 504 | 13.58 13.58.1 With a solution of 38 gms of copper acetate in a litre of soft water sqm 19.0 13.58.2 With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. sqm 18.0 |
| 505 | 13.59 13.59.1 75 mm diameter pipes meter 19.0 13.59.2 100 mm diameter pipes meter 25.0 13.59.3 150 mm diameter pipes meter 37.0 |
| 506 | 13.6 13.60.1 75 mm diameter pipes meter 22.0 13.60.2 100 mm diameter pipes meter 29.0 13.60.3 150 mm diameter pipes meter 43.0 |
| 507 | 13.61 |
| 508 | 13.62 |
| 509 | 13.63 |
| 510 | 13.64 |
| 511 | 13.65 |
| 512 | 13.66 13.66.1 One coat. sqm 35.0 13.66.2 Two coats. sqm 53.0 |
| 513 | 13.67 13.67.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. sqm 28.0 13.67.2 With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. sqm 24.0 13.67.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. sqm 24.0 |
| 514 | 13.68 |
| 515 | 13.69 |
| 516 | 13.71 |
| 517 | 13.72 13.72.1 Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. sqm 77.0 13.72.2 Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. sqm 78.0 |
| 518 | 13.73 |
| 519 | 13.74 |
| 520 | 13.75 |
| 521 | 13.76 |
| 522 | 13.77 |
| 523 | 13.78 |
| 524 | 13.79 |
| 525 | 13.8 13.80.1 0.8-1.2mm thickness sqm 368.0 13.80.2 2.0-2.5mm thickness sqm 338.0 |
| 526 | 13.81 |
| 527 | 13.82 13.82.1 6 mm thick plaster for internal walls sqm 146.0 13.82.2 8 mm thick plaster for external walls exposed to weather. sqm 180.0 |
| 528 | 13.83 13.83.1 ACP sheet 2mm thick sqm 2203.0 13.83.2 ACP sheet 3mm thick sqm 2403.0 13.83.3 ACP sheet 4mm thick sqm 2577.0 |
| 529 | 13.84 13.84.1 PVC foam sheet 3.0 mm thick sqm 1332.0 13.84.2 PVC foam sheet 5.0 mm thick sqm 1565.0 13.84.3 PVC foam sheet 8.0 mm thick sqm 1995.0 |
| 530 | 13.85 |
| 531 | 13.86 |
| 532 | 13.87 |
| 533 | 13.88 |
| 534 | 13.89 |
| 535 | 13.91 |
| 536 | 13.92 |
| 537 | 14.2 14.2.1 Door chowkhats each 544.0 14.2.2 Window chowkhats each 325.0 14.2.3 Clerestory window chowkhats each 238.0 |
| 538 | 14.5 14.5.1 Float glass panes of thickness 4 mm sqm 679.0 14.5.2 Float glass panes of thickness 5.5 mm sqm 759.0 |
| 539 | 14.6 14.6.1 Float glass panes of thickness 4 mm sqm 801.0 14.6.2 Float glass panes of thickness 5.5 mm sqm 882.0 |
| 540 | 14.7 14.7.1 Float glass panes of thickness 4 mm sqm 697.0 14.7.2 Float glass panes of thickness 5.5 mm sqm 778.0 |
| 541 | 14.8 14.8.1 2nd class teak wood fillets meter 30.0 14.8.2 Haldu/Bija/Kail wood fillets. meter 26.0 |
| 542 | 14.11 |
| 543 | 14.12 |
| 544 | 14.13 14.13.1 Red/ white sand stone slabs 30 to 50 mm thick. sqm 631.0 |
| 545 | 14.14 14.14.1 Sal wood battens. cum 74943.0 |
| 546 | 14.15 14.15.1 Not exceeding 4.00 metres in length. 14.15.1.1 Sal wood beams cum 76349.0 14.15.1.2 Haldu/Bija/Kail wood fillets. cum 76349.0 14.15.2 Above 4.00 metres and upto 5.00 metres length. 14.15.2.1 Sal wood beams cum 78106.0 14.15.2.2 Haldu/Bija/Kail wood fillets. cum 78101.0 |
| 547 | 14.16 |
| 548 | 14.17 |
| 549 | 14.18 |
| 550 | 14.19 |
| 551 | 14.2 14.20.1 Wheel 50 mm dia. and below. per wheel 136.0 14.20.2 Wheel above 50 mm dia. per wheel 211.0 |
| 552 | 14.21 14.21.1 Panelled or panelled and glazed shutters : 14.21.1.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm 3794.0 14.21.1.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm 3413.0 14.21.2 Glazed shutters : 14.21.2.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm 4021.0 14.21.2.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm 3611.0 |
| 553 | 14.22 14.22.1 Second class teak wood. sqm 3105.0 14.22.2 Hard wood, finger jointed sqm 1340.0 |
| 554 | 14.23 14.23.1 20 mm diameter. meter 265.0 14.23.2 25 mm diameter. meter 294.0 |
| 555 | 14.24 |
| 556 | 14.25 14.25.1 Sal wood. cum 73829.0 14.25.2 Haldu/Bija/Kail wood. cum 73829.0 |
| 557 | 14.26 14.26.1 two or more coats sqm 7.0 14.26.2 one or more coats sqm 4.0 |
| 558 | 14.27 |
| 559 | 14.28 |
| 560 | 14.29 |
| 561 | 14.31 |
| 562 | 14.32 14.32.1 75 mm diameter pipes meter 9.0 14.32.2 100 mm diameter pipes meter 11.0 14.32.3 150 mm diameter pipes meter 17.0 |
| 563 | 14.33 14.33.1 75 mm diameter pipes meter 21.0 14.33.2 100 mm diameter pipes meter 31.0 14.33.3 150 mm diameter pipes meter 46.0 |
| 564 | 14.34 14.34.1 75 mm diameter pipes meter 10.0 14.34.2 100 mm diameter pipes meter 13.0 14.34.3 150 mm diameter pipes meter 19.0 |
| 565 | 14.35 |
| 566 | 14.36 |
| 567 | 14.37 |
| 568 | 14.38 |
| 569 | 14.39 |
| 570 | 14.41 |
| 571 | 14.42 |
| 572 | 14.43 14.43.1 One or more coats on old work. sqm 674.0 |
| 573 | 14.44 14.44.1 Old work sqm 28.0 |
| 574 | 14.45 |
| 575 | 14.46 |
| 576 | 14.47 14.47.1 32 mm dia each 72.0 14.47.2 40 mm dia each 74.0 |
| 577 | 14.48 |
| 578 | 14.49 14.49.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. sqm 42.0 14.49.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. sqm 30.0 |
| 579 | 14.5 14.50.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. sqm 112.0 14.50.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm. sqm 67.0 |
| 580 | 14.51 14.51.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). sqm 87.0 14.51.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). sqm 52.0 |
| 581 | 14.52 14.52.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. sqm 65.0 14.52.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). sqm 41.0 |
| 582 | 14.53 14.53.1 One or more coats applied on walls @ 0.85 ltr/10 sqm. sqm 58.0 14.53.2 Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm sqm 52.0 14.53.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. sqm 52.0 |
| 583 | 14.54 14.54.1 One or more coats with copal varnish. sqm 32.0 14.54.2 One or more coats with spar varnish. sqm 33.0 |
| 584 | 14.55 |
| 585 | 14.56 |
| 586 | 14.57 |
| 587 | 14.58 14.58.1 Rough chiseled dressed stone sqm 177.0 14.58.2 Fine dressed stone sqm 207.0 |
| 588 | 14.59 |
| 589 | 14.61 |
| 590 | 14.62 14.62.1 (one or more coats) sqm 9.0 14.62.2 (two or more coats) sqm 11.0 |
| 591 | 14.63 |
| 592 | 14.64 |
| 593 | 14.7 14.70.1 8 mm dia bar 10 mm dia hole Per 100 mm 73.0 14.70.2 10 mm dia bar 12 mm dia hole Per 100 mm 88.0 14.70.3 12 mm dia bar 16 mm dia hole Per 100 mm 102.0 14.70.4 16 mm dia bar 20 mm dia hole Per 100 mm 131.0 14.70.5 20 mm dia bar 25 mm dia hole Per 100 mm 265.0 14.70.6 25 mm dia bar 32 mm dia hole Per 100 mm 364.0 14.70.7 32 mm dia bar 40 mm dia hole Per 100 mm 525.0 |
| 594 | 14.71 14.71.1 125x70x4 mm (ordinary type) each 44.0 14.71.2 100x70x4 mm (ordinary type) each 105.0 14.71.3 75x65x4 mm (heavy type) each 122.0 14.71.4 75x40x2.5 mm (ordinary type) each 74.0 14.71.5 50x40x2.5 mm (ordinary type) each 30.0 |
| 595 | 14.72 |
| 596 | 14.73 |
| 597 | 14.74 |
| 598 | 14.75 |
| 599 | 14.77 14.77.1 Bars upto 12 mm diameter metre 4.0 14.77.2 Bars above 12 mm diameter metre 9.0 |
| 600 | 14.78 14.78.1 Upto and including 12mm dia metre 78.0 |
| 601 | 14.83 14.83.1 Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work kg 65.0 14.83.2 Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. kg 68.0 14.83.3 Epoxy injection grout in concrete/RCC work of approved make kg 658.0 |
| 602 | 14.85 |
| 603 | 14.88 |
| 604 | 15.2 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). cum 578.0 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). cum 356.0 |
| 605 | 15.6.1 15.6.2 In lime mortar. cum 202.0 15.6.3 In cement mortar. cum 487.0 |
| 606 | 15.7 15.7.1 From brick work in lime mortar. 1000 nos 1254.0 15.7.2 From brick work in cement mortar. 1000 nos 1560.0 |
| 607 | 15.8 15.8.1 In lime mortar. cum 275.0 15.8.2 In cement mortar. cum 582.0 |
| 608 | 15.9 15.9.1 In lime mortar. cum 348.0 15.9.2 In cement mortar. cum 680.0 |
| 609 | 15.1 15.10.1 In lime mortar. cum 112.0 15.10.2 In cement mortar. cum 162.0 |
| 610 | 15.11 15.11.1 For thickness of tiles 10 mm to 25 mm. sqm 17.0 15.11.2 For thickness of tiles above 25 mm and upto 40 mm. sqm 26.0 |
| 611 | 15.12 |
| 612 | 15.13 |
| 613 | 15.14 15.14.1 Of area 3 sq. metres and below. each 85.0 15.14.2 Of area beyond 3 sq. metres. each 117.0 |
| 614 | 15.15 15.15.1 Of area 3 sq. metres and below. each 33.0 15.15.2 Of area beyond 3 sq. metres. each 44.0 |
| 615 | 15.16 15.16.1 Of sectional area below 40 square centimetres. metre 4.0 15.16.2 Of sectional area 40 square centimetres and above. cum 1023.0 |
| 616 | 15.17 15.17.1 Of sectional area below 40 square centimetres. metre per metre span 0.45 15.17.2 Of sectional area 40 square centimetres and above. cum per metre span 151.0 |
| 617 | 15.18 15.18.2 Of sectional area below 40 square centimetres. metre per metre span 0.8 15.18.1 Of sectional area 40 square centimetres and above. cum per metre span 213.0 |
| 618 | 15.19 15.19.1 R.S. Joists kg 1.33 15.19.2 Channels, angles, tees and flats kg 0.92 |
| 619 | 15.21 |
| 620 | 15.22 |
| 621 | 15.23 |
| 622 | 15.24 |
| 623 | 15.25 |
| 624 | 15.26 |
| 625 | 15.27 15.27.1 G.S. Sheet sqm 39.0 15.27.2 Asbestos/ Non asbestors sheet sqm 18.0 |
| 626 | 15.28 |
| 627 | 15.29 |
| 628 | 15.31 15.31.1 T’ or ‘L’ iron or pipe each 73.0 15.31.2 R.C.C. each 87.0 |
| 629 | 15.32 |
| 630 | 15.33 |
| 631 | 15.34 |
| 632 | 15.35 |
| 633 | 15.36 15.36.1 Upto 10 mm thick sqm 15.0 15.36.2 Thickness above 10 mm upto 25 mm sqm 19.0 15.36.3 Thickness above 25 mm upto 40 mm sqm 22.0 |
| 634 | 15.37 15.37.1 Thickness upto 40 mm sqm 69.0 15.37.2 Thickness above 40 mm upto 75 mm sqm 104.0 |
| 635 | 15.38 |
| 636 | 15.39 15.39.1 75 to 80 mm dia pipe. metre 18.0 15.39.2 100 mm dia pipe metre 19.0 15.39.3 150 mm dia pipe metre 19.0 |
| 637 | 15.4 15.40.1 15 mm to 40 mm nominal bore metre 40.0 15.40.2 Above 40 mm nominal bore metre 47.0 |
| 638 | 15.41 15.41.1 Upto 150 mm diameter metre 114.0 15.41.2 Above 150 mm dia upto 300 mm dia. metre 153.0 15.41.3 Above 300 mm diameter metre 198.0 |
| 639 | 15.42 |
| 640 | 15.43 |
| 641 | 15.44 |
| 642 | 15.45 |
| 643 | 15.46 15.46.1 Upto 150 mm diameter each 83.0 15.46.2 Above 150 mm diameter each 276.0 |
| 644 | 15.47 |
| 645 | 15.48 |
| 646 | 15.49 |
| 647 | 15.5 15.50.1 100 mm diameter metre 21.0 15.50.2 150 mm diameter metre 23.0 15.50.3 200 mm diameter metre 25.0 15.50.4 250 mm diameter metre 26.0 15.50.5 300 mm diameter metre 28.0 15.50.6 350 mm diameter metre 32.0 15.50.7 400 mm diameter metre 35.0 15.50.8 440 mm diameter metre 36.0 |
| 648 | 15.51 15.51.1 Rectangular manhole 90x80 cm and 45 cm deep each 611.0 15.51.2 Rectangular manhole 120x90 cm and 90 cm deep. each 1069.0 15.51.3 Rectangular arch type manhole 140x90cm and 2.45m deep. each 2023.0 15.51.4 Circular manhole 122 cm diameter and 1.68 m deep each 1553.0 |
| 649 | 15.52 15.52.1 Rectangular manhole 90x80 cm and beyond 45 cm depth. metre 486.0 15.52.2 Rectangular manhole 120x90 cm and beyond 90 cm depth. metre 579.0 15.52.3 Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). metre 468.0 15.52.4 Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). metre 322.0 |
| 650 | 15.53 |
| 651 | 15.54 |
| 652 | 15.55 |
| 653 | 15.56 |
| 654 | 15.57 |
| 655 | 15.58 15.58.1 Water bound macadam road sqm 86.0 15.58.2 Bituminous road sqm 168.0 |
| 656 | 15.59 15.59.1 Up to 600 mm diameter per metre 285.0 15.59.2 Above 600 mm diameter per metre 720.0 |
| 657 | 15.6 15.60.1 Up to 150 mm diameter per metre 129.0 15.60.2 Above 150 mm diameter per metre 156.0 |
| 658 | 15.61 |
| 659 | 15.62 15.62.1 120 x 120 cm (outside to outside) each 429.0 15.62.2 210 x 120 cm (outside to outside) each 932.0 |
| 660 | 15.63 |
| 661 | 15.64 |
| 662 | 17.1 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. each 2995.0 17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. each 7031.0 |
| 663 | 17.2 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid each 3036.0 17.2.2 W.C. pan with ISI marked black solid plastic seat and lid each 3013.0 17.2.3 Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. each 4536.0 |
| 664 | 17.3 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. each 4613.0 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid. each 4590.0 |
| 665 | 17.6 17.6.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern. each 2754.0 17.6.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. each 4458.0 17.6.3 Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. each 6312.0 17.6.4 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. each 8384.0 |
| 666 | 17.7 17.7.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. each 5567.0 17.7.2 Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. each 8660.0 17.7.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. each 12764.0 17.7.4 Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. each 15547.0 |
| 667 | 17.8 17.8.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern. each 3478.0 17.8.2 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. each 5128.0 17.8.3 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. each 7151.0 17.8.4 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. each 8689.0 |
| 668 | 17.11 17.11.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. each 2460.0 17.11.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. each 2187.0 17.11.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. each 1938.0 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. each 1664.0 17.11.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. each 1775.0 17.11.6 White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. each 1502.0 17.11.7 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. each 1525.0 17.11.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. each 3761.0 17.11.9 White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. each 2907.0 17.11.10 Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). each 7153.0 17.11.11 Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap each 3308.0 17.11.12 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. each 2948.0 |
| 669 | 17.12 |
| 670 | 17.13 |
| 671 | 17.14 17.14.1 Kitchen sink with drain board 17.14.1.1 510x1040 mm bowl depth 250mm. each 8074.0 17.14.1.2 510x1040 mm bowl depth 225mm. each 7609.0 17.14.1.3 510x1040 mm bowl depth 200mm. each 7493.0 17.14.1.4 510x1040 mm bowl depth 178mm. each 5286.0 17.14.2 Kitchen sink without drain board 17.14.2.1 610x510 mm bowl depth 200 mm. each 4583.0 17.14.2.2 610x460 mm bowl depth 200 mm. each 4351.0 17.14.2.3 470x420 mm bowl depth 178 mm. each 3422.0 |
| 672 | 17.15 17.15.1 Size450x300x150mm each 2341.0 17.15.2 Size600x450x200mm each 3328.0 |
| 673 | 17.16 |
| 674 | 17.17 17.17.1 Long pattern W.C. pan of size 580 mm each 765.0 17.17.2 Orissa pattern W.C. pan of size 580x440 mm each 1322.0 |
| 675 | 17.18 |
| 676 | 17.19 |
| 677 | 17.21 17.21.1 250x130x30 mm pair 200.0 17.21.2 250x125x25 mm pair 142.0 |
| 678 | 17.22 17.22.1 White each 945.0 17.22.2 coloured each 1037.0 |
| 679 | 17.23 17.23.1 White each 1615.0 17.23.2 Coloured each 2196.0 |
| 680 | 17.24 17.24.1 White each 456.0 17.24.2 Black each 433.0 17.24.3 Coloured (other than black and white) each 688.0 |
| 681 | 17.25 |
| 682 | 17.26 |
| 683 | 17.27 |
| 684 | 17.28 |
| 685 | 17.29 17.29.1 Flat back wash basin of size 630x450mm. each 1379.0 17.29.2 Flat back wash basin of size 550x400mm. each 857.0 17.29.3 Angle back wash basin of size 600x480mm. each 967.0 17.29.4 Angle back wash basin of size 400x400mm. each 694.0 17.29.5 Flat back wash basin of size 450x300mm. each 717.0 17.29.6 Surgeon type wash basin of size 660x460mm. each 1519.0 |
| 686 | 17.31 17.31.1 Size 450x300x150 mm. each 1236.0 17.31.2 Size 600x450x200 mm. each 2025.0 |
| 687 | 17.32 17.32.1 Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 17.32.1.1 75 mm dia with wall thickness of 5 mm metre 790.0 17.32.1.2 100 mm dia with wall thickness of 5 mm metre 970.0 17.32.2 Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 17.32.2.1 75 mm dia with wall thickness of 3.5 mm metre 840.0 17.32.2.2 100 mm dia with wall thickness of 4 mm metre 1020.0 17.32.2.3 150mm dia with wall thickness of 5mm metre 2460.0 17.32.3 Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 17.32.3.1 75 mm dia with wall thickness of 3.5 mm metre 773.0 17.32.3.2 100 mm dia with wall thickness of 3.5mm metre 910.0 17.32.3.3 150mm dia with wall thickness of 4 mm metre 2430.0 |
| 688 | 17.33 17.33.1 75 mm dia pipe each 39.0 17.33.2 100 mm dia pipe each 46.0 |
| 689 | 17.34 17.34.1 For 75 mm dia pipe each 37.0 17.34.2 For 100 mm dia pipe each 66.0 17.34.3 For 150 mm dia pipe each 105.0 |
| 690 | 17.35 17.35.1 150 mm dia 17.35.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm each 400.0 17.35.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm each 430.0 17.35.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm each 680.0 17.35.2 100 mm dia 17.35.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm each 364.0 17.35.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm each 408.0 17.35.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm each 450.0 17.35.3 75 mm dia 17.35.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm each 294.0 17.35.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm each 341.0 17.35.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm each 370.0 |
| 691 | 17.36 17.36.1 150 mm dia 17.36.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm each 702.0 17.36.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm each 825.0 17.36.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm each 600.0 17.36.2 100 mm dia 17.36.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm each 381.0 17.36.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm each 390.0 17.36.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm each 344.0 17.36.3 75 mm dia 17.36.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm each 230.0 17.36.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm each 259.0 17.36.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm each 242.0 |
| 692 | 17.37 17.37.1 100 mm dia 17.37.1.1 Sand cast iron as per IS - 1729 each 329.0 17.37.1.2 Spun cast iron as per IS - 3989 each 387.0 17.37.2 75 mm dia 17.37.2.1 Sand cast iron as per IS - 1729 each 288.0 17.37.2.2 Spun cast iron as per IS - 3989 each 329.0 |
| 693 | 17.38 17.38.1.1 150X150X150X150 17.38.1.2 Sand cast iron as per IS - 3989 each 1080.0 17.38.2 100x100x100x100mm 17.38.2.1 Sand cast iron as per IS - 1729 each 744.0 17.38.2.2 Spun cast iron as per IS - 3989 each 820.0 17.38.3 75x75x75x75mm 17.38.3.1 Sand cast iron as per IS - 1729 each 590.0 17.38.3.2 Spun cast iron as per IS - 3989 each 654.0 |
| 694 | 17.39 17.39.1 150X150X150X150 mm 17.39.1.1 Sand cast iron as per IS - 3989 each 1106.0 17.39.2 100x100x100x100mm 17.39.2.1 Sand cast iron as per IS – 1729 each 666.0 17.39.2.2 Spun cast iron as per IS – 3989 each 782.0 17.39.2.3 Hubless cast(spun) iron as per IS- 15905 each 600.0 17.39.3 75x75x75x75 mm 17.39.3.1 Sand cast iron as per IS – 1729 each 434.0 17.39.3.2 Spun cast iron as per IS – 3989 each 573.0 17.39.3.3 Hubless cast(spun) iron as per IS- 15905 each 362.0 |
| 695 | 17.4 17.40.1 150X150X150 mm 17.40.1.1 Spun cast iron as per IS - 3989 each 1499.0 17.40.2 100x100x100 mm 17.40.2.1 Sand cast iron as per IS - 1729 each 495.0 17.40.2.2 Spun cast iron as per IS - 3989 each 640.0 17.40.3 75x75x75 mm 17.40.3.1 Sand cast iron as per IS - 1729 each 387.0 17.40.3.2 Spun cast iron as per IS - 3989 each 533.0 |
| 696 | 17.41 17.41.1 150X150X150 mm 17.41.1.1 Spun cast iron as per IS - 3989 each 891.0 17.41.2 100x100x100 mm 17.41.2.1 Sand cast iron as per IS – 1729 each 504.0 17.41.2.2 Spun cast iron as per IS – 3989 each 607.0 17.41.2.3 Hubless cast(spun) iron as per IS- 15905 each 450.0 17.41.3 75x75x75 mm 17.41.3.1 Sand cast iron as per IS – 1729 each 352.0 17.41.3.2 Spun cast iron as per IS – 3989 each 428.0 17.41.3.3 Hubless cast(spun) iron as per IS- 15905 each 290.0 |
| 697 | 17.42 17.42.1 Sand cast iron as per IS - 1729 each 745.0 17.42.2 Spun cast iron as per IS - 3989 each 1093.0 |
| 698 | 17.43 17.43.1.1 Sand cast iron as per IS – 1729 each 724.0 17.43.1.2 Spun cast iron as per IS – 3989 each 1014.0 17.43.1.3 Hubless cast(spun) iron as per IS- 15905 each 535.0 |
| 699 | 17.44 17.44.1 Sand cast iron as per IS - 1729 each 541.0 17.44.2 Spun cast iron as per IS - 3989 each 832.0 |
| 700 | 17.45 17.45.1 Sand cast iron as per IS – 1729 each 491.0 17.45.2 Spun cast iron as per IS – 3989 each 724.0 17.45.3 Hubless cast(spun) iron as per IS- 15905 each 490.0 |
| 701 | 17.46 17.46.1 100x100x100x100 mm 17.46.1.1 Sand cast iron as per IS - 1729 each 724.0 17.46.1.2 Sand cast iron as per IS - 3989 each 700.0 17.46.1.3 Hubless cast(spun) iron as per IS- 15905 each 803.0 17.46.2 75x75x75x75 mm 17.46.2.1 Sand cast iron as per IS - 1729 each 544.0 17.46.2.2 Spun cast iron as per IS - 3989 each 573.0 |
| 702 | 17.47 17.47.1 100x100x100 mm 17.47.1.1 Sand cast iron as per IS - 1729 each 549.0 17.47.1.2 Sand cast iron as per IS - 3989 each 570.0 17.47.1.3 Hubless cast(spun) iron as per IS- 15905 each 512.0 17.47.2 75x75x75 mm 17.47.2.1 Sand cast iron as per IS - 1729 each 428.0 17.47.2.2 Sand cast iron as per IS - 3989 each 434.0 17.47.2.3 Hubless cast(spun) iron as per IS- 15905 each 345.0 |
| 703 | 17.48 17.48.1 Sand cast iron as per IS - 1729 each 724.0 17.48.2 Spun cast iron as per IS - 3989 each 927.0 |
| 704 | 17.49 17.49.1 Sand cast iron as per IS - 1729 each 636.0 17.49.2 Spun cast iron as per IS - 3989 each 695.0 17.49.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness each 575.0 |
| 705 | 17.5 17.50.1 76 mm off sets 17.50.1.1 With 75 mm dia pipe each 300.0 17.50.1.2 With 100 mm dia pipe each 474.0 17.50.2 114 mm off sets 17.50.2.1 With 75 mm dia pipe each 410.0 17.50.2.2 With 100 mm dia pipe each 503.0 17.50.3 152 mm off sets 17.50.3.1 With 75 mm dia pipe each 477.0 17.50.3.2 With 100 mm dia pipe each 605.0 |
| 706 | 17.51 17.51.1 75 mm off sets 17.51.1.1 With 75 mm dia pipe each 312.0 17.51.1.2 With 100 mm dia pipe each 370.0 17.51.1.3 With 150 mm dia pipe each 410.0 17.51.2 150 mm off sets 17.51.2.1 With 75 mm dia pipe each 392.0 17.51.2.2 With 100 mm dia pipe each 508.0 17.51.2.3 With 150 mm dia pipe each 625.0 |
| 707 | 17.52 17.52.1 100 mm 17.52.1.1 Sand cast iron as per IS - 1729 each 541.0 17.52.1.2 Spun cast iron as per IS - 3989 each 547.0 17.52.2 75 mm 17.52.2.1 Sand cast iron as per IS - 1729 each 387.0 17.52.2.2 Spun cast iron as per IS - 3989 each 387.0 |
| 708 | 17.53 17.53.1 150mm 17.53.1.1 Sand cast iron as per IS - 1729 each 322.0 17.53.1.2 Spun cast iron as per IS - 3989 each 380.0 17.53.1.3 Hubless cast(spun) iron as per IS- 15905 each 410.0 17.53.2 100 mm 17.53.2.1 Sand cast iron as per IS - 1729 each 259.0 17.53.2.2 Spun cast iron as per IS - 3989 each 300.0 17.35.2.3 Hubless cast(spun) iron as per IS-15905 each 320.0 17.53.3 75 mm 17.53.3.1 Sand cast iron as per IS - 1729 each 196.0 17.53.3.2 Spun cast iron as per IS - 3989 each 210.0 17.53.3.3 Hubless cast(spun) iron as per IS- 15905 each 250.0 |
| 709 | 17.54 17.54.1 100 mm 17.54.1.1 Sand cast iron S & S as per IS - 1729 each 201.0 17.54.1.2 Sand cast iron S & S as per IS - 3989 each 317.0 17.54.2 75 mm 17.54.2.1 Sand cast iron S & S as per IS - 1729 each 149.0 17.54.2.2 Sand cast iron S & S as per IS- 3989 each 219.0 |
| 710 | 17.55 17.55.1 150mm each 488.0 17.55.2 100 mm each 234.0 17.55.3 75 mm each 201.0 |
| 711 | 17.56 17.56.1 100 mm dia each 62.0 17.56.2 75 mm dia each 50.0 |
| 712 | 17.57 17.57.1 100 mm inlet and 100 mm outlet 17.57.1.1 Spun cast iron S & S as per IS: 3989. each 825.0 17.57.1.2 Sand Cast iron S & S as per IS: 1729. each 610.0 17.57.1.3 Hubless cast(spun) iron as per IS-15905 each 310.0 17.57.2 100 mm inlet and 75 mm outlet 17.57.2.1 Sand cast iron S & S as per IS - 3989 each 854.0 17.57.2.2 Spun Cast iron S & S as per IS- 1729. each 540.0 17.57.2.3 Hubless cast(spun) iron as per IS- 15905 each 260.0 |
| 713 | 17.58 17.58.1 75 mm diameter 136.0 17.58.2 110 mm diameter 238.0 |
| 714 | 17.59 17.59.1 Coupler 17.59.1.1 75 mm each 117.0 17.59.1.2 110 mm each 154.0 17.59.2 Single pushfit Coupler 17.59.2.1 75 mm each 140.0 17.59.2.2 110 mm each 195.0 17.59.3 Single tee with door 17.59.3.1 75x75x75 mm each 219.0 17.59.3.2 110x110x110 mm each 346.0 17.59.4 Single tee without door 17.59.4.1 75x75x75 mm each 201.0 17.59.4.2 110x110x110 mm each 266.0 17.59.5 Bend 87.50 17.59.5.1 75 mm bend each 117.0 17.59.5.2 110 mm bend each 172.0 |
| 715 | 17.6 17.60.1 75 mm each 33.0 17.60.2 110 mm each 50.0 |
| 716 | 17.61 |
| 717 | 17.62 17.62.1 Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). each 180.0 17.62.2 Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). each 224.0 17.62.3 Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). each 265.0 |
| 718 | 17.63 17.63.1 100 mm dia meter 222.0 17.63.2 75 mm dia meter 159.0 17.63.3 50 mm dia meter 101.0 |
| 719 | 17.64 17.64.1 Semi rigid pipe 17.64.1.1 32 mm dia each 87.0 17.64.1.2 40 mm dia each 98.0 17.64.2 Flexible pipe (only in residential & complaxes) 17.64.2.1 32 mm dia each 87.0 17.64.2.2 40 mm dia each 98.0 |
| 720 | 17.65 |
| 721 | 17.66 |
| 722 | 17.67 |
| 723 | 17.68 17.68.1 Circular shape 450mm dia. sqm 806.0 17.68.2 Rectangular shape 453x357mm sqm 642.0 17.68.3 Oval shape 450x350mm (outer dimensions) sqm 697.0 17.68.4 Rectangular shape 1500x450 mm sqm 1311.0 |
| 724 | 17.69 |
| 725 | 17.7 17.70.1 C.P. brass each 340.0 17.70.2 Vitreous china each 324.0 |
| 726 | 17.71 17.71.1 Waste coupling 31mm of 79mm length and 62mm breadth each 330.0 17.71.2 Waste coupling 38mm of 83mm length and 77mm breadth each 348.0 |
| 727 | 17.72 |
| 728 | 17.73 17.73.1 600x20mm each 952.0 17.73.2 450x20mm each 836.0 |
| 729 | 17.74 |
| 730 | 17.75 |
| 731 | 17.76 |
| 732 | 17.77 |
| 733 | 17.78 17.78.1 100 mm dia. each 74.0 |
| 734 | 17.79 17.79.1 Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. each 113.0 17.79.2 Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. each 131.0 |
| 735 | 17.8 17.80.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. each 499.0 17.80.2 Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. each 522.0 |
| 736 | 17.81 |
| 737 | 17.82 |
| 738 | 17.83 17.83.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. each 412.0 17.83.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. each 459.0 |
| 739 | 17.84 |
| 740 | 17.85 |
| 741 | 17.86 |
| 742 | 17.87 |
| 743 | 17.88 |
| 744 | 17.89 |
| 745 | 17.91 17.91.1 75 mm diameter pipe meter 22.0 17.91.2 100 mm diameter pipe meter 29.0 17.91.3 150 mm diameter pipe meter 36.0 |
| 746 | 17.92 17.92.1 75 mm diameter pipe meter 11.0 17.92.2 100 mm diameter pipe meter 14.0 17.92.3 150 mm diameter pipe meter 302.0 |
| 747 | 17.93 |
| 748 | 17.94 17.94.1 100 mm dia half round pipe metre 195.0 17.94.2 150 mm dia half round pipe metre 260.0 17.94.3 200mm dia half round pipe metre 378.0 |
| 749 | 17.99 17.99.1 For ground floor buildings. nos 24946.0 17.99.2 For Ground floor & Ist floor buildings. nos 32115.0 17.99.3 Add extra for every additional floor above Ist floor. nos 8552.0 |
| 750 | 17.95 |
| 751 | 18.6 18.6.1 Internal work - Exposed on wall 18.6.1.1 15 mm nominal outer dia Pipes. metre 129.0 18.6.1.2 20 mm nominal outer dia .Pipes. metre 153.0 18.6.1.3 25 mm nominal outer dia .Pipes. metre 177.0 18.6.1.4 32 mm nominal outer dia Pipes. metre 254.0 18.6.1.5 40 mm nominal outer dia Pipes. metre 354.0 18.6.1.6 50 mm nominal outer dia .Pipes. metre 528.0 18.6.2 Concealed work including cutting chases and making good the walls etc. 18.6.2.1 15 mm nominal outer dia .Pipes. metre 207.0 18.6.2.2 20 mm nominal outer dia .Pipes. metre 234.0 18.6.2.3 25 mm nominal outer dia Pipes. metre 288.0 18.6.2.4 32 mm nominal outer dia Pipes. metre 360.0 |
| 752 | 18.7 External Work 18.7.1 15 mm nominal outer dia Pipes. metre 122.0 18.7.2 20 mm nominal outer dia .Pipes. metre 141.0 18.7.3 25 mm nominal outer dia Pipes. metre 185.0 18.7.4 32 mm nominal outer dia .Pipes. metre 238.0 18.7.5 40 mm nominal outer dia Pipes. metre 324.0 18.7.6 50 mm nominal outer dia .Pipes. metre 498.0 18.7.7 62.50 mm nominal inner dia Pipes. metre 1429.0 18.7.8 75 mm nominal inner dia .Pipes. metre 2018.0 18.7.9 100mm nominal inner dia .Pipes. metre 2791.0 18.7.10 150 mm nominal inner dia Pipes. metre 3358.0 |
| 753 | 18.8 18.8.1 Internal work - Exposed on wall 18.8.1.1 15 mm dia. nominal bore metre 211.0 18.8.1.2 20 mm dia. nominal bore metre 255.0 18.8.1.3 25 mm dia. nominal bore metre 300.0 18.8.1.4 32 mm dia. nominal bore metre 361.0 18.8.1.5 40 mm dia. nominal bore metre 479.0 18.8.1.6 50 mm dia. nominal bore metre 596.0 18.8.2 Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 18.8.2.1 15 mm dia nominal bore metre 269.0 18.8.2.2 20 mm dia nominal bore metre 309.0 18.8.3 External work : including trenching and refilling etc. 18.8.3.1 15 mm dia. nominal bore metre 188.0 18.8.3.2 20 mm dia. nominal bore metre 223.0 18.8.3.3 25 mm dia. nominal bore metre 263.0 18.8.3.4 32 mm dia. nominal bore metre 310.0 18.8.3.5 40 mm dia. nominal bore metre 402.0 18.8.3.6 50 mm dia. nominal bore metre 492.0 18.8.3.7 65 mm dia. nominal bore metre 533.0 18.8.3.8 80 mm dia. nominal bore metre 622.0 |
| 754 | 18.9 18.9.1 Internal work - Exposed on wall 18.9.1.1 15.88 mm outer diapipe metre 243.0 18.9. 1.2 22.22 mm outer diapipe metre 375.0 18.9.1.3 28.58 mm outer diapipe metre 467.0 18.9.1.4 34.00 mm outer dia Pipe metre 636.0 18.9.1.5 42.70 mm outer dia Pipe metre 774.0 18.9.1.6 48.60 mm outer dia Pipe metre 896.0 18.9.2 Internal work - Concealed Pipe 18.9.2.1 15.88 mm outer dia .Pipes. metre 297.0 18.9.2.2 22.22 mm Outer diaPipes metre 428.0 |
| 755 | 18.12 18.12.1 With C.I. wheel of approved quality (screwed end) 18.12.1.1 25 mm nominal bore each 486.0 18.12.1.2 32 mm nominal bore. each 558.0 18.12.1.3 40 mm nominal bore each 677.0 18.12.1.4 50 mm nominal bore each 976.0 18.12.1.5 65 mm nominal bore each 1339.0 18.12.1.6 80 mm nominal bore each 2302.0 18.12.2 With brass lever handle of approved quality. 18.12.2.1 25 mm nominal bore each 341.0 18.12.2.2 32 mm nominal bore. each 419.0 18.12.2.3 40 mm nominal bore each 491.0 18.12.2.4 50 mm nominal bore each 639.0 |
| 756 | 18.13 18.13.1 25 mm nominal bore each 428.0 18.13.2 32 mm nominal bore. each 500.0 18.13.3 40 mm nominal bore each 584.0 18.13.4 50 mm nominal bore each 749.0 |
| 757 | 18.14 18.14.1 15 mm nominal bore each 316.0 18.14.2 20 mm nominal bore each 431.0 18.14 3 25 mm nominal bore each 499.0 |
| 758 | 18.15 18.15.1 25 mm nominal bore 18.15.1.1 Horizontal each 462.0 18.15.1.2 Vertical each 474.0 18.15.2 32 mm nominal bore 18.15.2.1 Horizontal each 587.0 18.15.2.2 Vertical each 715.0 18.15.3 40 mm nominal bore 18.15.3.1 Horizontal each 746.0 18.15.3.2 Vertical each 990.0 18.15.4 50 mm nominal bore 18.15.4.1 Horizontal each 1138.0 18.15.4.2 Vertical each 1353.0 18.15.5 65 mm nominal bore 18.15.5.1 Horizontal each 2012.0 18.15.5.2 Vertical each 2360.0 18.15.6 80 mm nominal bore 18.15.6.1 Horizontal each 2886.0 18.15.6.2 Vertical each 3699.0 |
| 759 | 18.16 18.16.1 15 mm nominal bore each 236.0 18.16.2 20 mm nominal bore each 285.0 18.16.3 25 mm nominal bore each 391.0 |
| 760 | 18.17 18.17.1 30 cm length 18.17.1.1 15 mm nominal bore each 88.0 18.17.1.2 20 mm nominal bore each 129.0 18.17.2 45 cm length 18.17.2.1 15 mm nominal bore each 149.0 18.17.2.2 20 mm nominal bore each 184.0 |
| 761 | 18.18 18.18.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. each 916.0 18.18.2 With well burnt flyash bricks of 50 kg/sqm compressive strength. each 870.0 |
| 762 | 18.19 18.19.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. each 5416.0 18.19.2 With flyash bricks of 50 kg/cm2 strength each 4995.0 |
| 763 | 18.2 18.20.1 With common burnt clay bricks of 25 kg/cm2 compressive strength. each 5168.0 18.20.2 With flyash bricks of 50kg/cm2 strength. each 4851.0 |
| 764 | 18.21 18.21.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. each 4870.0 18.21.2 With flyash bricks of 50kg/sqm compressive strength. each 4683.0 |
| 765 | 18.22 18.22.1 15 mm diameter pipe. metre 8.0 18.22.2 20 mm diameter pipe. metre 9.0 18.22.3 25 mm diameter pipe. metre 12.0 18.22.4 32 mm diameter pipe. metre 14.0 18.22.5 40 mm diameter pipe. metre 16.0 18.22.6 50 mm diameter pipe. metre 19.0 |
| 766 | 18.23 18.23.1 15 mm diameter pipe. metre 4.0 18.23.2 20 mm diameter pipe. metre 5.0 18.23.3 25 mm diameter pipe metre 6.0 18.23.4 32 mm diameter pipe metre 7.0 18.23.5 40 mm diameter pipe metre 8.0 18.23.6 50 mm diameter pipe metre 9.0 |
| 767 | 18.24 18.24.1 15 mm diameter pipe metre 4.0 18.24.2 20 mm diameter pipe metre 5.0 18.24.3 25 mm diameter pipe metre 7.0 18.24.4 32 mm diameter pipe metre 8.0 18.24.5 40 mm diameter pipe metre 9.0 18.24.6 50 mm diameter pipe metre 10.0 18.24.7 65 mm diameter pipe metre 13.0 18.24.8 80 mm diameter pipe metre 15.0 |
| 768 | 18.25 18.25.1 15 mm diameter pipe metre 107.0 18.25.2 20 mm diameter pipe metre 108.0 18.25.3 25 mm diameter pipe metre 111.0 18.25.4 32 mm diameter pipe metre 114.0 18.25.5 40 mm diameter pipe metre 116.0 18.25.6 50 mm diameter pipe metre 120.0 18.25.7 65 mm diameter pipe metre 189.0 18.25.8 80 mm diameter pipe metre 195.0 |
| 769 | 18.26 18.26.1 15 mm nominal bore each 117.0 18.26.2 20 mm nominal bore each 148.0 18.26.3 25 mm nominal bore each 158.0 18.26.4 32 mm nominal bore each 204.0 18.26.5 40 mm nominal bore each 321.0 18.26.6 50mm nominal bore each 428.0 18.26.7 65mm nominal bore each 625.0 18.26.8 80 mm nominal bore each 718.0 |
| 770 | 18.27 18.27.1 15 mm nominal bore. each 228.0 18.27.2 20 mm nominal bore. each 252.0 18.27.3 25 mm nominal bore. each 269.0 18.27.4 32 mm nominal bore. each 316.0 18.27.5 40 mm nominal bore. each 432.0 18.27.6 50 mm nominal bore. each 579.0 18.27.7 65 mm nominal bore. each 777.0 18.27.8 80 mm nominal bore. each 870.0 |
| 771 | 18.28 |
| 772 | 18.29 18.29.1 15 mm nominal bore each 306.0 18.29.2 20 mm nominal bore each 338.0 |
| 773 | 18.3 18.30.1 15 mm nominal bore each 318.0 18.30.2 20 mm nominal bore each 344.0 |
| 774 | 18.31 |
| 775 | 18.32 |
| 776 | 18.33 |
| 777 | 18.34 |
| 778 | 18.35 |
| 779 | 18.36 |
| 780 | 18.37 |
| 781 | 18.38 |
| 782 | 18.39 |
| 783 | 18.41 |
| 784 | 18.42 |
| 785 | 18.43 18.43.1 100 mm diameter each 806.0 18.43.2 150 mm diameter each 922.0 18.43.3 200 mm diameter each 1336.0 |
| 786 | 18.44 18.44.1 86 mm long weighing not less than 88 gm each 173.0 18.44.2 122 mm long weighing not less than 99 gm each 208.0 18.44.3 165mm long weighing not less than 110 gm each 242.0 18.44.4 90mm long weighing not less than 93 gm each 237.0 |
| 787 | 18.45 18.45.1 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. each 173.0 18.45.2 20mm nominal bore, 89mm long. Weighing not less than 88 gms. each 213.0 18.45.3 Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. each 242.0 |
| 788 | 18.46 18.46.1 15mm nominal bore, 107mm long. Weighing not less than 110 gms. each 251.0 18.46.2 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. each 332.0 |
| 789 | 18.47 18.47.1 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. each 144.0 18.47.2 15 mm nominal bore, 80mm long weighing not less than 46 gms. each 126.0 |
| 790 | 18.48 18.48.1 Circular type. 18.48.1.1 100 mm nominal dia. each 55.0 18.48.1.2 125 mm nominal dia with 25 mm waste hole. each 60.0 18.48.2 Rectangular type with openable circular lid. 18.48.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating. each 148.0 |
| 791 | 18.49 |
| 792 | 18.51 18.51.1 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. each 234.0 18.51.2 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. each 314.0 18.51.3 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. each 615.0 18.51.4 40mm nominal bore, 206mm long. Weighing not less than 690 gms. each 1016.0 18.51.5 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. each 1469.0 |
| 793 | 18.52 18.52.1 30cm length. each 61.0 18.52.2 45 cm length. each 79.0 |
| 794 | 18.53 18.53.1 15 mm nominal bore.Weighing not less than 32 gms. each 59.0 18.53.2 20mm nominal bore.Weighing not less than 40gms. each 65.0 18.53.3 25mm nominal bore.Weighing not less than 62 gms. each 82.0 |
| 795 | 18.54 18.54.1 80 mm nominal bore each 3548.0 18.54.2 100 mm nominal bore each 5200.0 18.54.3 150 mm nominal bore each 7497.0 18.54.4 200 mm nominal bore each 8472.0 |
| 796 | 18.55 18.55.1 80 mm nominal bore each 4186.0 18.55.2 100 mm nominal bore each 6562.0 18.55.3 150 mm nominal bore each 8526.0 18.55.4 200 mm nominal bore each 11766.0 |
| 797 | 18.56 |
| 798 | 18.57 |
| 799 | 18.58 |
| 800 | 18.59 |
| 801 | 18.6 18.60.1 25 to 40 mm nominal bore each 247.0 18.60.2 50 to 80 mm nominal bore each 644.0 |
| 802 | 18.61 |
| 803 | 18.62 |
| 804 | 18.63 |
| 805 | 19.1 19.1.1 100 mm diameter metre 195.0 19.1.2 150 mm diameter metre 260.0 19.1.3 200 mm diameter metre 337.0 19.1.4 230 mm diameter metre 461.0 19.1.5 250 mm diameter metre 507.0 19.1.6 300 mm diameter metre 680.0 |
| 806 | 19.2 19.2.1 100 mm diameter S.W. pipe metre 475.0 19.2.2 150 mm diameter S.W. pipe metre 580.0 19.2.3 200 mm diameter S.W. pipe metre 677.0 19.2.4 230 mm diameter S.W. pipe metre 728.0 19.2.5 250 mm diameter S.W. pipe metre 782.0 19.2.6 300 mm diameter S.W. pipe metre 877.0 |
| 807 | 19.3 19.3.1 100 mm diameter S.W. pipe metre 226.0 19.3.2 150 mm diameter S.W. pipe metre 366.0 19.3.3 200 mm diameter S.W. pipe metre 430.0 19.3.4 230 mm diameter S.W. pipe metre 465.0 19.3.5 250 mm diameter S.W. pipe metre 500.0 19.3.6 300 mm diameter S.W. pipe metre 577.0 |
| 808 | 19.4 19.4.1 110 mm diameter OD (min. wall thickness 3.2mm) metre 234.0 19.4.2 160 mm diameter OD (min. wall thickness 4.0mm) metre 477.0 19.4.3 200 mm diameter OD (min. wall thickness 4.9mm) metre 751.0 19.4.4 250 mm diameter OD (min. wall thickness 6.2mm) metre 972.0 19.4.5 300 mm diameter OD (min. wall thickness 7.7mm) metre 1232.0 |
| 809 | 19.5 19.5.1 110 mm diameter PVC. pipe metre 576.0 19.5.2 160 mm diameter PVC. pipe metre 704.0 19.5.3 200 mm diameter PVC. pipe metre 821.0 19.5.4 250 mm diameter PVC. pipe metre 949.0 19.5.5 300 mm diameter PVC pipe metre 1078.0 |
| 810 | 19.6 19.6.1 110 mm diameter PVC. pipe metre 274.0 19.6.2 160 mm diameter PVC. pipe metre 444.0 19.6.3 200 mm diameter PVC. pipe metre 521.0 19.6.4 250 mm diameter PVC. Pipe metre 607.0 19.6.5 300 mm diameter PVC pipe metre 700.0 |
| 811 | 19.7 19.7.1 100x100 mm size P type 19.7.1.1 With well burnt bricks each 1764.0 19.7.1.2 With Sewer bricks conforming to IS : 4885 each 1668.0 19.7.2 150 x 100 mm size P type. 19.7.2.1 With well burnt bricks each 1803.0 19.7.2.2 With sewer bricks conforming to IS : 4885 each 1707.0 19.7.3 180x150 mm size P type 19.7.3.1 With well burnt bricks each 1913.0 19.7.3.2 With Sewer bricks conforming to IS : 4885 each 1818.0 |
| 812 | 19.8 19.8.1 100 mm dia. R.C.C. pipe metre 243.0 19.8.2 150 mm dia. R.C.C. pipe metre 285.0 19.8.3 250 mm dia. R.C.C. pipe metre 385.0 19.8.4 300 mm dia. R.C.C. pipe metre 480.0 19.8.5 450 mm dia. R.C.C. pipe metre 699.0 19.8.6 500 mm dia. R.C.C. pipe metre 826.0 19.8.7 600 mm dia. R.C.C. pipe metre 1278.0 |
| 813 | 19.9 19.9.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.9.1.1 With well burnt bricks each 7997.0 19.9.1.2 With Sewer bricks conforming to IS : 4885 each 7747.0 19.9.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 19.9.2.1 With well burnt bricks each 18086.0 19.9.2.2 With Sewer bricks conforming to IS : 4885 each 17402.0 19.9.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : 19.9.3.1 With well burnt bricks each 21816.0 19.9.3.2 With Sewer bricks conforming to IS : 4885 each 21228.0 |
| 814 | 19.1 19.10.1 Size 90x80 cm 19.10.1.1 With well burnt bricks metre 6176.0 19.10.1.2 With Sewer bricks conforming to IS : 4885 metre 5448.0 19.10.2 Size 120x90 cm 19.10.2.1 With well burnt bricks metre 7380.0 19.10.2.2 With Sewer bricks conforming to IS : 4885 metre 6512.0 |
| 815 | 19.11 19.11.1 With well burnt bricks each 8418.0 19.11.2 With Sewer bricks conforming to IS : 4885 each 7958.0 |
| 816 | 19.12 19.12.1 With well burnt bricks metre 5257.0 19.12.2 With Sewer bricks conforming IS : 4885 metre 4648.0 |
| 817 | 19.13 19.13.1 With well burnt bricks each 15915.0 19.13.2 With Sewer bricks conforming IS : 4885 each 15067.0 |
| 818 | 19.14 19.14.1 With well burnt bricks metre 6809.0 19.14.2 With Sewer bricks conforming IS : 4885 metre 6014.0 |
| 819 | 19.15 19.15.1 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 19.15.1.1 With well burnt bricks each 35165.0 19.15.1.2 With Sewer bricks conforming IS : 4885 each 32659.0 |
| 820 | 19.16 19.16.1 With well burnt bricks metre 16863.0 19.16.2 With Sewer bricks conforming IS : 4885 metre 14806.0 |
| 821 | 19.17 19.17.1 With 20x20 mm square bar each 226.0 19.17.2 With 20 mm diameter round bar each 187.0 |
| 822 | 19.18 |
| 823 | 19.19 19.19.1 With 20x20 mm square bar each 254.0 19.19.2 With 20 mm diameter round bar each 214.0 |
| 824 | 19.2 19.20.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. each 1437.0 19.20.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. each 3134.0 19.20.3 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. each 6333.0 |
| 825 | 19.21 19.21.1 Light duty D- 2.5 19.21.1.1 Rectangular shape 600x450mm internal dimensions each 1229.0 19.21.1.2 Square shape 450mm internal dimensions each 1045.0 19.21.1.3 Circular shape 450mm internal diameter each 987.0 19.21.2 Medium duty - 10 19.21.2.1 Square shape 450mm internal dimension each 1183.0 19.21.2.2 Circular shape 500mm internal diameter each 1098.0 19.21.3 Heavy duty D - 20 19.21.3.1 Circular shape 560 mm internal diameter each 1711.0 19.21.4 Extra Heavy Duty - 35 19.21.4.1 Circular shape 560 mm internal dia. each 1885.0 |
| 826 | 19.22 |
| 827 | 19.23 19.23.1 For pipes 100 to 230 mm diameter each 238.0 19.23.2 For pipes 250 to 300 mm diameter each 292.0 19.23.3 For pipes 350 to 450 mm diameter each 424.0 |
| 828 | 19.24 19.24.1 100 mm dia. sand cast iron drop connection each 4915.0 19.24.2 150 mm dia. sand cast iron drop connection each 6856.0 |
| 829 | 19.25 19.25.1 For 100 mm dia. sand cast iron drop connection metre 2092.0 19.25.2 For 150 mm dia. sand cast iron drop connection metre 2399.0 |
| 830 | 19.26 19.26.1 Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 each 1126.0 19.26.2 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 each 1758.0 19.26.3 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 each 1638.0 19.26.4 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 each 167.0 |
| 831 | 19.27 19.27.1 With well burnt bricks each 3941.0 19.27.2 With fly ash bricks 100 key/cm2 strangth each 4900.0 |
| 832 | 19.28 19.28.1 With well burnt bricks each 4910.0 19.28.2 With fly ash bricks 100 kg/cm2 strength each 6983.0 |
| 833 | 19.29 19.29.1 With well burnt bricks each 6285.0 19.29.2 With fly ash bricks 100 kg/cm2 strength each 6485.0 |
| 834 | 19.3 19.30.1 With well burnt bricks each 20609.0 |
| 835 | 19.31 |
| 836 | 19.32 19.32.1 100 mm dia each 298.0 19.32.2 150 mm dia each 411.0 |
| 837 | 19.33 19.33.1 100 mm dia metre 163.0 19.33.2 150 mm dia metre 221.0 19.33.3 200 mm dia metre 284.0 19.33.4 230 mm dia metre 386.0 19.33.5 250 mm dia metre 422.0 19.33.6 300 mm dia metre 552.0 |
| 838 | 19.34 19.34.1 100 mm dia. Half round R.C.C. pipe metre 196.0 19.34.2 150 mm dia. Half round R.C.C. pipe metre 233.0 19.34.3 250 mm dia. Half round R.C.C. pipe metre 315.0 19.34.4 300 mm dia. Half round R.C.C. pipe metre 387.0 |
| 839 | 19.35.1 19.35.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 each 6185.0 19.35.3 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 each 10454.0 |
| 840 | 19.36 |
| 841 | 19.37 |
| 842 | 19.38 |
| 843 | 19.39 |
| 844 | 19.41 |
| 845 | 19.42 |
| 846 | 19.43 |
| 847 | 19.44 |
| 848 | 19.45 19.45.1 900mmx450mm (weight of cover 43.76kg ± 10%) each 6999.0 19.45.2 450mmx600mm (weight of cover 14.2kg ± 10%) each 2617.0 19.45.3 300mmx300mm (weight of cover 4.1kg ± 10%) each 1113.0 19.45.4 600mm (weight of cover 41.78kg ± 10%) each 7533.0 19.45.5 500mm (weight of cover 43.1kg ± 10%) each 5626.0 |
| 849 | 19.46 19.46.1 100 mm dia to 110 mm dia metre 160.0 19.46.2 150 mm dia to 160 mm dia metre 300.0 19.46.3 200 mm dia metre 608.0 19.46.4 250 mm dia metre 802.0 19.46.5 300 mm dia metre 915.0 |
| 850 | 21.1 21.1.1 For fixed portion. 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) kg 378.0 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 416.0 21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) kg 332.0 21.1.2 For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) kg 446.0 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 484.0 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) kg 494.0 21.1.3 Deduct for not providing EDPM rubber/neoprene gasket all around. kg 80.0 |
| 851 | 21.2 21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. sqm 802.0 21.2.2 Pre-laminated particle board with decorative lamination on both sides. sqm 907.0 |
| 852 | 21.3 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) sqm 774.0 21.3.2 With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) sqm 948.0 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). sqm 1182.0 |
| 853 | 21.4 21.4.1 With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) sqm 259.0 21.4.2 With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) sqm 262.0 21.4.3 With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). sqm 262.0 |
| 854 | 21.5 21.5.1 With stainless steel cover plate - minimum 1.25 mm thickness each 1890.0 21.5.2 With brass cover plate - minimum 1.25 mm thickness. each 2072.0 |
| 855 | 21.8 21.8.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg 439.0 21.8.2 Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) kg 461.0 |
| 856 | 21.11 |
| 857 | 21.12 21.12.1 Anodized (AC 15 ) aluminium tubular handle bar metre 423.0 21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar. metre 458.0 21.12.3 Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. metre 474.0 |
| 858 | 21.13 |
| 859 | 21.14 |
| 860 | 21.15 21.15.1 Anodized (AC15) aluminium each 54.0 21.15.2 Powder coated minimum thickness 50 micron aluminium. each 57.0 21.15.3 Polyester powder coated minimum thickness 50 micron aluminium. each 56.0 |
| 861 | 21.16 21.16.1 Anodized (AC15 ) aluminium each 62.0 21.16.2 Powder coated minimum thickness 50 micron aluminium each 65.0 21.16.3 Polyester powder coated minimum thickness 50 micron aluminium. each 69.0 |
| 862 | 21.17 |
| 863 | 21.18 |
| 864 | 21.19 |
| 865 | 21.21 |
| 866 | 21.22 |
| 867 | 21.24 |
| 868 | 22.1 (i) Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. |
| 869 | 22.3 a) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b) IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) |
| 870 | 22.4 22.4.1 Serrated with central bulb (225mm wide, 8- 11mm thick). metre 551.0 22.4.2 Dumb bell with central bulb (180mm wide, 8mm thick). metre 499.0 22.4.3 Kickers (320mm wide, 5mm thick). metre 522.0 |
| 871 | 22.5 a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 872 | 22.6 a) After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. |
| 873 | 22.7 a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. |
| 874 | 22.11 |
| 875 | 22.12 |
| 876 | 22.13 |
| 877 | 22.14 22.14.1 Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cum 6569.0 22.14.2 Cement mortar 1:3 (1 cement : 3 sand) cum 9308.0 22.14.3 Cement mortar 1:4 (1cement : 4 sand) cum 8437.0 |
| 878 | 22.15 |
| 879 | 22.16 |
| 880 | 22.17 |
| 881 | 22.18 |
| 882 | 22.19 |
| 883 | 22.21 |
| 884 | 22.22 (i) Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) |
| 885 | 22.23 (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in \"V\" groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. |
| 886 | 22.24 |
| 887 | 22.25 |
| 888 | 22.26 |
| 889 | 22.27 a) Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b) Puncture Resistance of 950 N (as per ASTM E154) c) Elongation of >400 % (as per ASTM D412) d) Peel Strength of concrete: >1500 N/m (as per ASTM D903) e) Tensile strength of 28.2 MPA (as per ASTM D412). |
| 890 | 22.28 |
| 891 | 22.29 |
| 892 | 22.31 22.31.1 For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 sqm 459.0 22.31.2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 sqm 390.0 |
| 893 | 22.32 |
| 894 | 22.33 22.33.1 For vertical surface two coats @ 0.70 kg per sqm sqm 412.0 22.33.2 For horizontal surface one coat @1.10 kg per sqm. sqm 319.0 |
| 895 | 22.34 |
| 896 | 22.35 22.35.1 For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. metre 449.0 22.35.2 For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) each hole 16.0 |
| 897 | 22.36 |
| 898 | 22.37 |
| 899 | 23.11 |
| 900 | 23.12 |
| 901 | 23.13 |
| 902 | 23.14 |
| 903 | 23.15 |
| 904 | 24.9 24.9.1 Providing and fixing insulation with resin bonded Glass wool sqm 338.0 24.9.2 Providing and fixing insulation with resin bonded Rock wool sqm 238.0 |
| 905 | 24.11 |
| 906 | 24.12 24.12.1 Ridges plain (500 - 600mm). metre 722.0 24.12.2 Flashings/ Aprons.( Upto 600 mm) metre 706.0 24.12.3 North light curves. metre 777.0 24.12.4 Barge board (Upto 300 mm). metre 669.0 24.12.5 Crimp curve sqm 738.0 24.12.6 Gutter. (600 mm over all girth). metre 848.0 |
| 907 | 25.1 25.1.1 White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) each 4726.0 25.1.2 White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) each 4392.0 |
| 908 | 25.2 25.2.1 Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) each 9788.0 25.2.2 Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) each 8742.0 |
| 909 | 25.3 25.3.1 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) each 26412.0 25.3.2 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) each 23559.0 25.3.3 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) each 21099.0 25.3.4 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) each 18838.0 |
| 910 | 25.4 25.4.1 Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 28103.0 25.4.2 Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 19275.0 25.4.3 Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 18952.0 25.4.4 Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 18023.0 |
| 911 | 25.5 25.5.1 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Each 34317.0 25.5.2 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 25954.0 25.5.3 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 22237.0 25.5.4 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 19450.0 |
| 912 | 25.6 25.6.1 Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) each 13365.0 25.6.2 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) each 10670.0 |
| 913 | 25.7 25.7.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) each 16581.0 |
| 914 | 25.8 25.8.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) each 14543.0 25.8.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) each 13614.0 |
| 915 | 25.9 25.9.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) each 15591.0 25.9.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) each 14940.0 |
| 916 | 25.1 25.10.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) each 18585.0 25.10.2 White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) each 16785.0 |
| 917 | 25.11 25.11.1 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) each 14544.0 25.11.2 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) each 13336.0 25.11.3 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) each 10641.0 |
| 918 | 25.12 25.12.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) each 23927.0 25.12.2 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) each 20025.0 |
| 919 | 25.13 25.13.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) each 18491.0 |
| 920 | 25.14 25.14.1 White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) each 23927.0 25.14.2 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) each 22998.0 |
| 921 | 25.15 |
| 922 | 25.16 |
| 923 | 25.17 |
| 924 | 25.18 |
| 925 | 25.19 |
| 926 | 25.21 |
| 927 | 25.22 |
| 928 | 25.23 |
| 929 | 25.24 |
| 930 | 25.25 |
| 931 | 25.26 |
| 932 | 25.27 |
| 933 | 25.28 |
| 934 | 25.29 |
| 935 | 25.31 |
| 936 | 25.32 |
| 937 | 25.33 |
| 938 | 25.34 |
| 939 | 25.35 |
| 940 | 25.36 |
| 941 | 25.37 |
| 942 | 25.38 |
| 943 | 25.39 |
| 944 | 25.41 |
| 945 | 25.42 |
| 946 | 25.43 |
| 947 | 25.44 |
| 948 | 25.45 |
| 949 | 25.46 |
| 950 | 25.47 |
| 951 | 25.48 |
| 952 | 25.49 |
| 953 | 25.51 |
| 954 | 25.52 |
| 955 | 25.53 |
| 956 | 25.54 |
| 957 | 25.55 |
| 958 | 25.56 |
| 959 | 25.57 |
| 960 | 25.58 |
| 961 | 25.59 |
| 962 | 25.61 |
| 963 | 25.62 |
| 964 | 25.63 25.63.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) each 14729.0 25.63.2 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) each 15100.0 25.63.3 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) each 18490.0 25.63.4 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) each 19234.0 25.63.5 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) each 25273.0 |
| 965 | 25.64 25.64.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) each 10617.0 |
| 966 | 25.65 |
| 967 | 25.66 |
| 968 | 25.67 25.67.1 Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) each 46339.0 25.67.2 Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) each 46668.0 25.67.3 Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) each 45410.0 |
| 969 | 25.68 |
| 970 | 25.69 |
| 971 | 25.71 |
| 972 | 25.72 |
| 973 | 25.73 |
| 974 | 25.74 |
| 975 | 25.75 |
| 976 | 25.76 |
| 977 | 25.77 |
| 978 | 25.78 |
| 979 | 25.79 |
| 980 | 25.81 |
| 981 | 25.82 |
| 982 | 27.11 |
| 983 | 28.35 |
| 984 | 28.36 |
| 985 | 28.37 |
| 986 | 28.38 |
| 987 | 29.1 29. 1.1 Upto 1 Hectare each 13000.0 29.1.2 1 Hectare to 2 Hectare each 16000.0 29.1.3 Add extra for each additional one Hectare or part there off each 2250.0 29.1.4 Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. each 2450.0 |
| 988 | 29.6 29.6.1 Up to 100km (both way) upto 100km both way 3150.0 29.6.2 Add extra for distance beyond 100km and upto 150km. (both way) per km. 27.0 29.6.3 Add extra for every additional km beyond 150km (both way) per km. 22.0 |
| 989 | 29.9 29.9.1 First time design work 29.9.1.1 Built up area upto 500 sqm per sqm 55.0 29.9.1.2 Built up area more than 500 sqm and upto 3000 sqm per sqm 45.0 29.9.1.3 Built up area more than 3000 sqm. per sqm 35.0 29.9.2 Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) 29.9.2.1 Plinth area upto 500 sqm per sqm 22.0 29.9.2.2 Plinth area more than 500 sqm and upto 3000 sqm per sqm 18.0 29.9.2.3 Plinth area more than 3000 sqm per sqm 14.0 |
| 990 | 29.11 Note – Including other item ( if required ) of SHEDULE OF RATES (SOR) For BUILDING WORKS in force from January, 1st 2024, of Engineer-In-Chief (Building) M.P. Public Works Department M.P.BHOPAL ( Volume- I & II ) Sub Engineer Sub Divisional Officer Executive Engineer Sec. 15 P.W.D. RTC Sub Dn. P.W.D. New Bhopal Division Bhopal Bhopal. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
