Name of Work:Re construction of damaged Compound Wall and maintenance works of TE building at MUNDERI
Sl. No.
Item Description
1
Demolishing brick/laterite work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge
2
In cement mortar
3
Laterite masonry work using available dismantled laterite stones in cement mortar 1:6 (1 cement : 6 coarse sand) including dressing the stones to required shape and finish including necessary scaffolding etc. complete
4
For compound wall
5
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
6
Beyond 30 cm girth up to and including 60 cm girth
7
Beyond 60 cm girth up to and including 120 cm girth
8
15 mm cement plaster on rough side of single or half brick wall of mix:
9
1:6 (1 cement: 6 coarse sand)
10
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:
11
Two coats
12
Finishing walls with Acrylic Smooth exterior paint of required shade :
13
Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).
14
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
15
One coat.
16
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
17
Two or more coats on new work.
18
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.
19
12mm average thickness
20
Applying crack filler Dr.Fixitcrack- X-paste or equivalentby removing existing paints to expose the plaster at linecracks ,widening the cracks upto 2mm , apply the crack filler firmly and level the surface , allow it settle for 24 hours into the crackwith a spatula or putty knife and then apply another coat, all as per the direction of the Engineer in charge.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
