|
| 1 | SH-I (RC Items) |
| 2 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 3 | Group C |
| 4 | Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. |
| 5 | 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire |
| 6 | 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire |
| 7 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 8 | 20mm |
| 9 | 25mm |
| 10 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 11 | 2 x 1.5 sq. mm |
| 12 | 3 x 1.5 sq. mm |
| 13 | 4 x 1.5 sq. mm |
| 14 | Supplying and fixing of following size of flexible round copper cable on surface/ recess with suitable clamp , suitable for work on 230 volt, 50 HZ AC supply i/c connection etc as reqd ( Make -Polycab/Havells/Finolex ) |
| 15 | 2x1.5 sq mm |
| 16 | 3x1.5 sq mm |
| 17 | 3x2.5 sq mm |
| 18 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 19 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 20 | Single pole |
| 21 | Single pole Neutral |
| 22 | Triple pole |
| 23 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 24 | 63 A |
| 25 | 100 A |
| 26 | S/F of D/Stype fan hook made ofMS rod i/c fixing the same on ceiling with suitable 2no Anchor fastener etc as required |
| 27 | Providing and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note:- More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored.) |
| 28 | SITC of 1x18/20 WattLEDBatten luminariewithpolycarbonateHousinghaving efficiency 100 lumens /wattcomplete suitable for work on230 volt50Hz AC supply i/c connection testing etc complete as required.(Make -Philips /Crompton/Havells /Bajaj/Wipro/Surya ). |
| 29 | S/F offollowingsizestar rated energy efficient Ceiling fan suitable for operation on 230 Volts ,single phase50 Hz AC supply complete etc as reqd without regulator)Make -( Bajaj/Polar /USHA /Crompton/Havells /orient ) |
| 30 | 1200mm |
| 31 | 1400mm |
| 32 | SITC of 450 mm sweeposcillating type wall mounted fan with three speed control regulator having metallic bodyand metal blade ,1325 RPM speed , 6030 m3/Hour Air Displacement,suitable forworking on 230 V 50 Hz single phase AC supply & i/c fixing on wall with suitable fastener , connection etc. complete as required (Crompton/Bajaj/orient/polar/Almonard/USHA)(Conference Hall ) |
| 33 | S/F offollowingsizemetallic bodyexhaust fan with front guard ,1350 rpm,Air delivery 550 CMH suitable for operation on 230 Volts ,single phase50 Hz AC supply complete etc as reqd (Make -( Bajaj/Polar /USHA /Crompton/Havells /orient ) |
| 34 | 300mm |
| 35 | Supplyingand laying of following size ofpvc insulated pvc sheathed 1.1 kv grade Aluminum conductor armored cable confirming to relevant IS-Specification etc complete as reqd. (Make -Polycab/Havells/finolex)- |
| 36 | 4X 16 sq. mm |
| 37 | Supplying and making End Termination with brass compression glands for the following sizes of PVC / XLPE insulated PVC sheathed & armoured 1100 V grade cable including cost of crimping lugs / ferrules, compression glands, solder, cable sockets, insulation tap etc. complete as required. |
| 38 | 4 x16 Sq.mm. |
| 39 | S/F of 63 amps four poleONload change over switchinsteel enclosure with side handle operationcapable ofworking 415/500 Vi/c fixing the same on wall /pole with suitable clamp/fastener i/cdrilling hole , making connection, earthing the body etc. i/c dismantling of existing faulty unit (if required at site)as reqd. |
| 40 | S/F63 Amps Heavy dutyDouble break TPN Switch fuse unit with HRC fuses insteel enclosurewith side handle operation capable ofworking 415/500 V i/ci/c fixing the same on wall /pole with suitable clamp/fastener i/cdrilling hole , making connection, earthing the body etc. as reqd. |
| 41 | Supplying & fixing ofPowder coatedSurface mounted bus bar chamber Boxmade out of 18 gauge M.S. Sheetsuitable for100Amp,415 volt 3 phase AC supplyforDistribution of AC power supply i/cremovable top & bottom gland plates with conduit knockouts with sufficient space for different cable sizecomplete as required. |
| 42 | Visiting charges of Electrician per site on Call basis for repairing of Elect accessories (except AC & DGs ) in various exchanges/ BTSsi/c analysis of fault, minor repairing , cleaning of free cooling filter/ ACs filters including to & frojourney chargesetc comp as reqd. |
| 43 | Hill Area inOADehradun |
| 44 | S/F of following electrical items in existing Electrical Installation ,Compound light I/c dismantling of existing faulty items (if required ) and connection, testing etc. as reqd.(Note- All spare of lighting systen should be of Make -Bajaj/Crompton/Philips /Havells /Wipro ) |
| 45 | 18/20 W Retrofit Pin type LED Bulb |
| 46 | 9 W Retrofit Pin type LED Bulb |
| 47 | Batten Holder |
| 48 | 5/6A Switch |
| 49 | 3 pin 5/6A Socket |
| 50 | 15/16 amp switch |
| 51 | 6 pin 15/16 amp socket outlet |
| 52 | 3 mm thick phenolic laminated sheet |
| 53 | 5 A Plug Top |
| 54 | 15 A Plug Top |
| 55 | S/F of two module Stepped type electronic fan regulator on the existing modular plate switch box I/c connections but excluding modular plate etc. as required. |
| 56 | Shifting & ITC of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.( OLD FANS) |
| 57 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB\"s (but without MCB\"s and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (At Dasau, Rasoolpur, Jogyo & Tuini) |
| 58 | 4 way (4 + 12), Double door |
| 59 | SITC of 25Watt Energy Efficient LED type Road Light luminarie with pressure die cast aluminum with mid power LED\"s as light sources & Heat Resistant toughened glass with frame cover and integral electronic driver complete with IP 65 protection ,min. system efficacy 100 lm/Watt suitable for work on 140-270 V AC Supply i/c fixing on existing GI bracket / Poleand connection i/c removing of existing faulty light etc as reqd(Make -Philips /Crompton/Havells Endura omniplus /Bajaj/Wipro ). |
| 60 | SH-II (DG related Items) |
| 61 | S/F of 63 amps 3 Phase Selector Switch ONload type in sheet steel enclosure with selector switches 03 nos. operationcapable ofworking 415/500 Vi/c fixing the same on wall /pole with suitable clamp/fastener i/cdrilling hole , making connection, earthing the body etc. (if required at site)as reqd. (At Chillar, Ramtal Garden, Kunna, Lakhamandal, Kanded) |
| 62 | Shifting (from Sahiya to Kasi Gate) & ITC of existing 40 KVA AVR (Servokon Make) at TE Kalsi Gate after testing the same at TE Sahiya i/c transportation, loading & unloading etc. Complete as required. |
| 63 | Supplying and fixing of 12 VoltsMaintenance free Battery of following capacity for E/A sets, i/c initial charging, battery terminals, transportation, testing, commissioningetc. complete as reqd.(Note: Battery should be of atleast 24 months warranty (18 month full replacement +6 month prorata basis). Manufacturer warranty card with dealer stamp shall be submitted along with new battery & Cost of old battery shall be adjusted/returned) |
| 64 | 12 V, 100 AH (At Sabhawala, Dakpathar & Herbertpur) |
| 65 | Pdg & Makingof General Servicing of the following capacity E/A sets of different make and model installed at TE/BTS Sites i/c replacement of Lub oil ,lub oil filter and diesel filter and cleaning of all parts of DG set like fuel line ,cooling system ,checking of all DG controlwiring ,belt and drives for proper working as per manufacturer recommendationscomplete as per manufracturer recommendationi/c Fare and labour chargei/ccomplete as reqd.(Note:The recovered black oil shall be given to contractor.) |
| 66 | 15 KVA (At TE Dakpathar) |
| 67 | Installation, testing , commissioning of ExistingDEAseton existingfoundation with all acessorieslikeCubical type manual /AMF control paneli/c fixing ofSilencer,exhaust pipe , fuel tank, fuel line connections, control wiringfrom panel toenginei/ccutting, jointing, weldingofflanges (if reqd) , nuts, bolts , i/c loadingand assembling ,fixing the the DG Seti/c making good the damage etc.i/cOnehourtesting of DG set on exchange loadetc as reqd. |
| 68 | 15kVA EA setin silent canopy (At TE Dakpathar) |
| 69 | Replacement offollowing itemin upto 40 KVAE/A sets of different make and model installed at TE/BTS Sites, i/c removing of faulty item (if reqd) ,making connection, testing etc complete as reqd. |
| 70 | Battery Charger (Solid state SMPS or SCRbased battery chargerssuitable up to 12V, 180 AH Battery) (At Sabhawala) |
| 71 | RPM cum Hour Meter with cable etc. (At Rudrapur & Kalsi Gate) |
| 72 | Re-fixing of Solar Panels i/c DC cable connection re-fixing the structure made out of galvanized angle iron i/c cutting welding and grinding at site etc, complete as required. (At Hattar) |
