|
| 1 | Printing & Supplying one set (Front & Back) of PVC photo ID sticky fused laminated cards with overlay, Card thickness 500 micron, printing for front side in multi colour and back side in black colour as per the existing layout & font etc. suitable for pasting on Access card (84mm x 54mm), Digital single side printing with gumming at the back complete as required. (Note: 1. The firm has to supply the cards within the5 daysof providing the details ) |
| 2 | Attending the complaint of CCTV system / access control system (hardware only ) on call and visiting the location, checking the system, diagnose the fault occurred and rectifying the same by the technician. |
| 3 | Replacement of following faulty component installed in the CCTVsystem at different locations if required |
| 4 | 12V, 3/5 ASMPS suitable for giving power to 4 nos CTV camera |
| 5 | Replacement of fixed lens module in existing faulty IP fixed lens dome camera compatible with existing fixed lens dome type CCTV camera(Compatible with existing make of M/s Samsung/Hanwa) |
| 6 | Replacement of module in existing faulty IP VF lens dome camera compatible with existing VF lens dome type CCTV camera(Compatible with existing make of M/s Samsung/Hanwa) |
| 7 | Replacement of faulty hard disk in existing NVR with new 2 TB surveillance Hard disk to systemcomplete as required. |
| 8 | Replacement of existing faulty 2 TB external portable hard disk with new 2 TB Hard disk complete with USB 3.0 Cable to Back Up Files etc. complete as required. (make WD/ Seagate) |
| 9 | Replacement of faulty hard disk with new 4 TB internal type surveillance Hard in existing NVR disk to systemcomplete as required. |
| 10 | Replacement of faulty POE switch new 4 port POE giga switch complete with connection thorugh RJ45 connectors as required |
| 11 | Supplying, drawing, Installation, Testing and commissioning ofCAT6 UTP LSZH 23AWG Twisted Pair one run Cablein existingconduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pairshould be complied as per UL/ETL erification program forcompliance with ANSI/TIA-568.2-D standard. Outer diametershould be in the range of 6.1mm nominal with OperatingTemperature Range : -5° to +60°C. Bending Radius : < 4 XCable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg |
| 12 | Replacement of faulty power supply of PTZ camera of same specification of existing PTZ Camera |
| 13 | Replacement of faultyCAT6cabling with new CAT6 4 pair armoured cable in existing conduit / on surface/ cable tray as required (M/s D Link/Polycab or SS) |
| 14 | Replacement of faulty irrepiarablefixed lens camera with new camera of same specifications /make and compatible with existing system ( 2MP IP based fixed lens camera,true day and night camera (IR distance 15-20 mtr) ,low illumination 0.15LUX,Excellent Noise Reduction, compact Design with POE, BLC) (Compatible with existing make of M/s Samsung/Hanwa) |
| 15 | Providing & fixing dome body fixed lensIP camera compatible with existing CCTV system on rent basis in place of fauly CCTV caemra installed at crucial locations. |
| 16 | Providing & fixing VF lens bullet/domebody IP camera compatible with existing CCTV system on rent basis in place of fauly bullet VF lens CCTV caemra installed at crucial locations (For 1st 7 days to be paid by department and after that to be borne by the agency) |
| 17 | Providing & fixing 16 channel NVR compatible with existing CCTV system on rent basis in place of fauly 16 channle NVR (For 1st 7 days to be paid by department and after that to be borne by the agency) |
| 18 | Replacement of faulty LCD/ LED screen with new 21/22 inch LED screen compatible with existing system compete as required ( Dell/ HP) |
| 19 | Replacement of faulty of electromagnetic lock for single leaf door with new electromagnetic lock for single leaf door complete as required (Make Alagatec/ BEL/ Sekurit) |
| 20 | Replacement of Two Door (4 Reader) Access Control Panel with new two Door (4 Reader) Access Control Panel with Built-in 2.5 Amps Supply, with display, on board TCP/IP, Can connect to all the readers which gives weigand or Clock & Data output. 30000 users, 55000 transaction (Make SPECTRA ) |
| 21 | SITC 8 port 10100/1000 giga switch complete with connection and testingas required ( Dlink/ Digilink/ AMP make) |
| 22 | SITC 5 port 10100/1000 giga switch complete with connection and testingas required ( Dlink/ Digilink/ AMP make) |
| 23 | Replacemnet of faultyLED Exit signages with new Laser etched LED Exit signages on ceiling / wall mounted with ecthing on 4mm transparent acrylic sheet of 350 x160 mm wth extra bright LED in glass epoxy PCB strip concealed in top mounted suitabel size MS box duly powder coated & equipped with neccessary circuit to step down form 230 v to 12/ 6-7 V with Lithium/nickel cadmium battrey & battrey charger. |
| 24 | Single side |
| 25 | Double side |
| 26 | Supplying and fixing of 25 mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit etc. complete as required. |
| 27 | Supply& fixing of 25mm X 16 mmsizePVC caping & casing on surface / wall etc. complete as required |
| 28 | S/Fixing of 2 X 1.5 Sqmm.1.1 KV Grade PVC insulated copper conductor flexible cable in the existing conduit i/c making connections, testing etc. complete as required. |
| 29 | Providing and fixing of 15/16 Amp PVC Combo box with 1 Nos. Switch socket suitable for 230 v, 50 Hz single phase supply i/c connection etc complete as reqd. |
| 30 | SITC of wall mountable 4 U rack, 450 mm deep complete with power distribution unit,locking arrangement with front glass door etc. complete as required. |
| 31 | Supply & laying following size8 kHDMI cable complete with connection etc ( Stecker make) |
| 32 | 10 mtr |
| 33 | 15 mtr |
| 34 | 3 mtr |
| 35 | 1 mtr |
| 36 | Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. |
| 37 | Copper Patch Cords of length 3m |
| 38 | Copper Patch Cords of length 5m |
| 39 | Copper Patch Cords of length 10m |
| 40 | Less Credit for dismantled material which shall be the property of contractor |
| 41 | 12V 5 ASMPS |
| 42 | Fixed lens module of IP fixed lens dome camera |
| 43 | Module of IP VF lens dome camera |
| 44 | 2 TB Hard disk |
| 45 | 4 TB Hard disk |
| 46 | 4 port POE switch |
| 47 | 2MP PTZ camera NetworkModule |
| 48 | Single side LED Exit signages |
| 49 | Double side LED Exit signages |
| 50 | Note:-1. The Agency has to submit police verification record & ID proof of each staff.2. The firm shall provide each staff with working cell phone.3. The staff may be deputed for duty as per instruction of concerned SDE (E)/JTO (E).4. Penalty shall be imposed in case of absence of any staff as per T & C of contract.5.The Estimated Rates are inclusive of GST / other Input Tax Credit (ITC) taxes as applicable & Freight Charges (Unloading & Stacking) etc., the contractor shall quote accordingly.6.The contractor shall provide correct tariff heads & other details to enable BSNL claim Input Tax Credit.7.The bidder who submits the offer with concessional Goods and Service Tax (GST) shall submit the proof of applicable concessional GST. In case the Concessional GST is not creditable to BSNL it should be included in the price of the goods/services.8. The FF & packing amount quoted shall not be subject to change after bid evaluation /ordering on account of change of copper, lead base price, change in duties & taxes of item etc.9. Bidder must mandatorily mention HSN & SAC numbers.10. Evaluation of bids: - The evaluation and comparison of responsive bids shall be done on the basis of Net cost to BSNL on the prices of the goods & Services (i.e. complete work) offered along with all applicable Taxes, packing Forwarding Freight & Insurance charges etc. exclusive of GST.Declaration by Bidder1.We hereby declare that in quoting the above prices, we have taken into account the entire credit on inputs available under the GST Act introduced w.e.f. 1 July 2017 and further extended on more items till date.2. We hereby certify that HSN/SAC shown in column 17 are correct & credit of GST for the amount shown in column 10 above are admissible as per GST Laws.Name of bidder:Seal of Company: GST No./(s) |
