|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as specified anddirected and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and removing from site complete all as specified and directed. |
| 4 | M & L for rolled mild steel work angle iron as in door frame (Chowkhats) / cooler stand and other similar work including provn of 12mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. |
| 5 | S & F second class Hardwood 35 mm thick, factory made, plain framed, panelled shutter (Three panels) with panels of 9mm thick BWPgrade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed. |
| 6 | S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both sideand both faces is covered with approved pattern with Decorative colouredlaminate type 1 of 0.9 mm thick and all around side faces covered with 7-10mm thick 1st class hard wood liping duly polished complete all as specified and directed. |
| 7 | M&L for factory made Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of members of shutter shall be as specified in SSR 2009 Part-I, section 8 clauseMember shall be kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed. |
| 8 | S&F for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour sheet PVC Sheet rinforced with M.S square tube,fixingin opening as per specification & drawing complete all as specified and directed. |
| 9 | S & F factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed. |
| 10 | S & F in repair Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge, including required wiremess and sheet glass(Plain/figured) etc in complete window, including holes, cutting holes for hold fast,neccesary fittings and making good in PCC 1:2:4 type B-1, plaster work and including synthetic enamel paint two coat over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : All rates incl in this item. |
| 11 | S&Ffixed type ventilators aluminium powder coated of frame size 50.80x25.40mm, 1.5mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading, aluminium grill with fixing arrangement (weight of grill not less than 2.50Kg/sqm) aluminium wire mesh 0.45mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed.Note : AL section thickness 1.50mm |
| 12 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161of SSR (Part -II ) 2020 complete all as specified and directed. |
| 13 | M&L for preparing the new wooden surface & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer over 10Cm width or girth complete all as specified and directed. |
| 14 | M&L preparing newsteel or iron surfaces of any description,exc 10cm in width or girth and two coats of synthetic enamel Paint over a coat of red oxide primer complete all as specified and directed |
| 15 | M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in fixing of hold fast and other similar work complete all as specified and directed. |
| 16 | S&F in repairstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixedwith stainless steel wire staples fixedall as specified and directed |
| 17 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc0.50 Sqm each pane complete all as specified and directed. |
| 18 | S & F sheet glass, ordinary quality 5.5mm thick fixed in repairs with oil putty size of glass not exc 0.50 Sqm in each pane for steelor wooden windows/doors fixed with wooden beadand pin tacked complete all as specified and directed. |
| 19 | S&F mild steel butt hinges, medium weight, cold rolled,ISI marked of size 100 mm complete all as specified and directed. |
| 20 | M&L mild steel 300mm ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed. |
| 21 | M&L in repairs mild steel 300mm ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed. |
| 22 | S & F 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified anddirected. |
| 23 | S & F in repair aluminium handle fabricatedtype, anodised 150mm size conforming to IS complete all as specified and directed. |
| 24 | S&F in repair aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed. |
| 25 | S&F in repair butt hinges 100mm size stainless steel complete all as specified |
| 26 | Taking down plaster of any description including raking out joints, hacking for key scrubbing down with water on wall / ceiling complete all as specifid and directed |
| 27 | M& L for 15mm thickrendering in cement mortar (1:6),on stone masonary surfaces finished even and smooth complete all as specified and directed |
| 28 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over 1 mm thickwall putty all as specified & directed. |
| 29 | S&F, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc including taking downold u/s curtain rod with knob complete all as specified & directed. |
| 30 | S & F aluminium door shutters with frame of aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, brass handle and brass tower bolts of size 150mm x 02 Nos in each door, hinges, anodised aluminium snap beading screws, hydraulically regulated double action floor door spring made up of 1.25mm thick aluminium alloy sheet foundation box for each shutter, etc andincl fitted with 5mm thick tinned glass in glazed shutter with brass mortice lock 100mm 2 levers, vertical type including taking down old aluminium door/window shutter with frame complete all as specified and directed |
| 31 | M&L for aluminium powder coated sliding window, ventilator three track including aluminium powder coated decorated grill sliding shutter 5mm thick tinted float glasses, necessary aluminium beadings fittings and other panels to prevent air from out side including old u/s aluminium window/ventilator as per Chief EngineerDrg No CEBZ/TD/15/2011 complete all as specified and directed. |
| 32 | Repair to seel window / gate including necessary welding, reivting, easing drilling and replacement of unserviceable hanging device,glass pane,wiremmesh and making themin serviceable conditioncomplete all as specified and directed. |
| 33 | Demolition ofbrick work or stone/boulder masonarybuilt in cement mortar of any specification and in any position complete all as specified and directed. |
| 34 | M&L for walling random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed. |
| 35 | All as per item No 34.00 but except stone complete all as specified and directed |
| 36 | M&L for brick work with flyash old size bricks, straight or curved on plan exc. 6mm mean radius, built inin cement mortar 1:6.complete all as specified and directed |
| 37 | S&F for 18mm thick PVC board of one side prelaminated or digital finished and other side plain white colour to make kitchen cabinet shutter/drawer front shutterscomplete with and including all fittings and fixtures as per specifications complete all as specified and directed. |
| 38 | S&F for 18mm thick PVC board both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete with and inculding all fittings and fixtures as per specifications complete all as specified and directed |
| 39 | S & F false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness(as per IS: 14862) of size 595x595 mm and any one of the desin (occeanic, lake & hill, cascade or electra) in true horizontal level,suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length, and 15x32mm made from 0.30 mm thick sheet, and cross \"T\" of size 15x32mm made of 0.30 mm sheet, spaced between main \"T\" at 600mm c/c to form a grid of 600X600mm and wall angle of size 15x20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixures,smoke detectors etc.Main \"T\" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin,etc with dash fasteners,GI adjustable rods of 3mm dia with gavanised Butterfly level clips,spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of allT-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all height and dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 40 | Dismantling of ceiling board/lathing any thickness complete all as specified and directed. |
| 41 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement, pvc sheet fillet of width 35 mm for wall panelling and fixing at site on PVC frame complete all as specified and directed. |
| 42 | M&L for aluminiumpartition in repairsusing aluminium sections fitted with 5mm thick tinted glass in upper portion from 3\" height as required as per site and 12 mm thick prelaminated particle board both side of standard quality of approved make, any type upto 3\" height as required as per site from bottom using glazing clips including jointing cleat for fixing glazing clips, rubber packing anodised aluminium beading etc aluminium tower bolt, floor stoper and locking arrangement by providing latch lock of standard quality of approved make complete all as specified and directed. |
| 43 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 44 | M&L for Glazed ceramic tiles coloured (450x300mm) x 7mm thick, in wall/verticle surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed. |
| 45 | M & L for Non-skid Ceramic tiles 7 to 8 mm thick ( square /Rectangular)area of each tile exceeding 0.11 sqmbut not exc 0.18 sqmin floors etc set and jointed in neat cement slurryand pointed inwhite or coloured in whiteor colouredcement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6) complete all as specified and directed. |
| 46 | S & F sheet glass, ordinary quality 5.5mm thick fixed in repairs with oil putty size of glass not exc 0.50 Sqm in each pane for steelor wooden windows/doors fixed with wooden beadand pin tacked complete all as specified and directed. |
| 47 | S&F Deco door seal 1.5\" width gate bottom sealing strip draft excluder stopper with aluminium plate and nylon bristles for weather stripping, air sound slocking complete all as specified and directed. |
| 48 | S&F in repairs to existing butt hinges/single action spring hinges/ double action spring hinges/projecting type hinges/box type hinges by welding the same or newto existing door frame/mild steel window frame complete all as specified and directed.Note : Above quoted rate is inclusive of taking down/refixing of shutters at site. No extra shall be admissible on this account |
| 49 | S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 50 | S&F in repair 12 mm thick toughened glass for door of any size and side portions of toughened glass fixed to wall / floor, joints sealed with clear silicon silicate gel to make water tight, incl necessarycleats edges with diamond cut including taper drilling to flush the screws / all fitting as required, floor hinges, patch fitting top,bottom and sides,lock and handles, inluding fixing of floor spring /Floor Machinespider joint etc complete all as specified and directed. |
| 51 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 52 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 53 | S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 54 | S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 55 | Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 56 | Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 57 | S&F in repair tubular towel rail brass chromium plated20mm dia \"D\" type 60cm long complete all as specified and directed. |
| 58 | S&F in repairs 15mm bore cast copper alloy chromium plated fancy bib tap long body , screwed for iron pipe complete all as specified and directed. |
| 59 | S&F in repairs sink with drainage board made of stainless steel 1.00 mm thick, kitchen, with plugs, washers and waste including fixing cantilever brackets and connecting union overall size not less than 1145mm x 510mm, bowl size560 x 410 x 200mm complete all as specified and directed. |
| 60 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm without drainage board, with plugs, washers and waste including fixing cantilever bracketscomplete all as specified and directed.. |
| 61 | S&F in repair fancy type angle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 62 | S&F in repairs pillar taps fancy type cast copper allloy capston headed, chromium plated, screwed down, high pressure with long screwedshank and fly nut, screwed for 15mm bore iron pipe complete all as specified and directed. |
| 63 | Dismantling of existing unserviceable water tank ofany description capacity exc 250 Ltr but n.exc 500trs capacity each complete all as specified and directed |
| 64 | S& F rotational moulded synthetic (HDPE) water storage tank 500litre capacity hoisted & fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 65 | S&F ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as specified and directed. |
| 66 | S&Fin repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, ISI marked complete all as specified and directed. |
| 67 | Taking down old unserviceable flushing cistern S&F PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity . White, with inlet ball valve, float, handlewith 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed. |
| 68 | Taking down old unserviceable PVC connectionand S & F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed |
| 69 | S&F in repair Soap dish any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed. |
| 70 | Taking down old wooden plate rack and S&F stainless steel plate rack made of 0.50mm thick of over all size920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed. |
| 71 | S&F in repairs looking mirror of size 600 x 450 bevelled edgewithselected quality glass mounted on 6 mm thick AC bldg boardor commercial plywood & fixed to wooden plugs with chromium plated brass screw and cup washers.complete all as specified and directed |
| 72 | Taking down old unserviceable WHB and S&Fwash hand basin vitreous china white /colour flat size 550 x 400mm fixed including waste coupling, waste pipe complete all as specified and directed. |
| 73 | Supply and fixing in repair bright finished brass 100 mm mortice latch and lock with 3 levers and a pair of lever handles of approved quality with necessary screws etc complete all as specified and directed. |
| 74 | Total in Figures |
| 75 | Quoted Amount in Words |
