Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc completed all as specified. |
| 2 | M & L for rendering 15 mm thick on other thanfair faces of brick wall finished fair & even in CM 1:6 complete all as specified and directed. |
| 3 | M & L for rendering 15 mm thick on fair faces of brick wall with mixing WPC @ 3% by wt of cement finished fair & even in CM 1:4 complete all as specified and directed. |
| 4 | M & L for rendering 10 mm thick onbrick or concrete surface of ceiling finished fair & even in CM 1:3 complete all as specified and directed. |
| 5 | M&L Preparing of new surface of wall and applying twocoatsofexterior emulsion paint over a coat primer on walls complete all as specified and directed by Engineer-in-charge. complete all as specified and as directed by Engineer-in-Charge . |
| 6 | M & Lpreparation of newly plastered surfaces of wall and applying two coats ofOBD over a coat of putty fillingincluding preparation ofsurfaces on walls as specified and directed. |
| 7 | M & Lpreparation of newly plastered surfaces of ceiling and applying two coats ofOBD over a coat of putty fillingincluding preparation ofsurfaces on walls as specified and directed. |
| 8 | M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling surface including applying 2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and directed. Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator. |
| 9 | M&L for preparation of plastered or unplastered old decorated surfaces by complete removal of existing treatment by mechanised sander of berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling of holes and cracks with with suitable material like cement or plaster of paris etcand thereafter applying two coat of oil bound distemper over a coat of1- 2 mm putty on walls.Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator. |
| 10 | All as per item No.9 here-in-before but on surfaces of ceiling. |
| 11 | Material and labour for preparation of old painted surfaces of steel of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as directed.Make of Paint : Asian(Apcolite)/ Nerolac (Goodlass)/ Berger paints/ICI Dulux |
| 12 | Material and labour for preparation of old painted surfaces of wood and wood basedof any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as directed. Make of Paint : Asian(Apcolite)/ Nerolac (Goodlass)/ Berger paints/ICI Dulux |
| 13 | M&L Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer. |
| 14 | Preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat ofpink primer complete all as specified and directed by Engineer-In-Charge. |
| 15 | Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each all as specified and directed by Engineer - in – Charge. |
| 16 | Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each andall as specified and directed by Engineer - in - Charge. |
| 17 | Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified and directed by Engineer - in - Charge . |
| 18 | S&F power coated aluminium frame work fordoors, windows,partition s etc incl grill for windows for windows etc with one or more rebated section incl jointing cleats for fixingetc complete complete. |
| 19 | S & F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) etc complete, as specified and directed. |
| 20 | S&Ffor 4.8/5.0 mm thick sheet glass ordinary quality and glazingeach pane n exc 0.50 Sqm fixed with neoprenerubber gasket in aluminium frame work complete all as specified. |
| 21 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and directed. |
| 22 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 23 | Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed by the Engineer-in-Charge |
| 24 | Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed by the Engineer-in-Charge |
| 25 | S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified and directed by Engineer - in - Charge |
| 26 | S & F flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed by Engineer - in - Charge. |
| 27 | S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long all as specified and directed by Engineer - in – Charge . |
| 28 | S&F 300mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 29 | S & F aluminium handle cast type anodised, 125 mm long all as specified and directed by Engineer - in - Charge . |
| 30 | S & F Stainless Steel butt hinges, medium weight100mm size all as specified and directed by Engineer - in - Charge . |
| 31 | S & FFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S Sscrews shall be paid separately) |
| 32 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.ccomplete all as specified and as directed . |
| 33 | Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. For measurement superficial area in elevation will be measure complete all as specified and as directed. |
| 34 | S&F mild steel Godrej pattern cupboard with back, sides, top, bottom, 02 shelves & mild steel shutter two leaves with frame , incl necessary fittings of 18 gauge MS sheet with locking arrangement and handle etc all as per Godrej pattern with duplicate keys including necessary fittings & 19mm stainless steel rod for hanging cloths & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The frame of cupboard to be fixed to wall with 6 Nos fastners.The cost of fastners & grouting themis deemed to be included in unit rates complete all as specified and as directed.Note:- Superficial area shall be measured, Approx Size (1150x1920x600mm) . |
| 35 | Supply & Fixing of 18 mm thick Rajshri WPC celluka ply of plain colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets as per specifications complete all as specified and as directed. |
| 36 | Supply & Fixing of 18 mm thick Rajshri WPC celluka ply of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet shutter/drawer front shutters as per specifications complete all as specified and as directed. |
| 37 | Supply & Fixing of 12 mm thick Rajshri WPC celluka ply of plain white colour fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides as per specifications complete all as specified and as directed. |
| 38 | Supply & Fixing of 6 mm thick Rajshri WPC celluka ply of plain white colour fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides as per specifications complete all as specified and as directed. |
| 39 | Supply & Fixing for 20 mm wide & 1 mm thick PVC edge bending of PVC pasted on edges with suitable adhesive complete all as specified and as directed. |
| 40 | Supply & Fixing of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and as directed. |
| 41 | Supply & Fixing of Ball bearing runners 45 mm telescopic channel (20 inch) full extension load capacity 50 kgs complete all as specified and as directed. (Make: Hettich,Ebco,Prime) |
| 42 | Supply & Fixing of chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 558x500 mm/220X630 mm with necessary fixing clips etc complete all as specified and as directed. (Make: Hettich,Ebco,Prime) |
| 43 | Supply & Fixing of chromium plated stainless steel wire basket (cup and saucer basket) pull out type size 558x300 mm/250x500/600 mm with necessary fixing clips etc complete all as specified and as directed. (Make: Hettich,Ebco,Prime) |
| 44 | Supply & Fixing of chromium plated stainless steel wire basket (Jar basket) pull out type size 585x150 mm/180X500 mm with necessary fixing clips etc complete all as specified and as directed. (Make: Hettich,Ebco,Prime) |
| 45 | Supply & Fixing of chromium plated stainless steel wire basket (Thali basket) pull out type, size 380x500with necessary fixing clips etc complete all as specified and as directed. (Make: Hettich,Ebco,Prime) |
| 46 | Supply & Fixing of chromium plated stainless steel wire basket (Cutlery basket) pull out type, size 380x500 mm/220X500 mm with necessary fixing clips etc complete all as specified and as directed. (Make: Hettich,Ebco,Prime) |
| 47 | Supply & Fixing of chromium plated stainless steel wire basket (Storage/plain basket) pull out type, size 380x500 mm/160X500 mm with necessary fixing clips etc complete all as specified and as directed. (Make: Hettich,Ebco,Prime) |
| 48 | Supply & Fixing of stainless steel handles 100 mm size for kitchen cabinet/cupboard shutters complete all as specified and as directed.(Make: Hettich,Ebco,Prime) |
| 49 | M &L forABS body magnetic latches of size 50mm . Complete all as specified and as directed |
| 50 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed |
| 51 | M&L, Non-skid ceramic coloured tiles tiles 7 to 8 mm thick (square/rectangular)of aera of each exc 0.06 Sqm but n.exc 0.16 Sqm , in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified. |
| 52 | M & L for light shade , Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of eachexceeding 0.36 sqm But n.exc 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 20 mm thick Screed bed or bedding layer of mortarfor laying floor finishes in CM 1:6 etc completed all as specified. |
| 53 | M & L for 25mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in sub base floor complete all as specified and directed. |
| 54 | M & L for light shade , Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n.exc 1.00 Sqm , in floors etc. on vertical surface set andoverincluding 10 mm thick rendering with cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles,complete all as specified. |
| 55 | M & L first quality coloured glazed ceramic, joint free tiles fixed in pattern of different colour including border area of each tile exc 0.15 sqm but n.exc 0.20 Sqm and 7-8 mmthick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. Note :- Pattern of the tiles will be decided by GE at the time of execution. |
| 56 | Taking down steel tubing/ PVC15mm bore and connections including cleaning for refixing or removing to stores completeall as specified and directed by Engineer - in – Charge. |
| 57 | All as per Srl Item No 56 here in before but 20mm bore all as specified and directed by Engineer - in - Charge. |
| 58 | Supplying and laying of CPVC pipes 20 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 59 | Supplying and laying of CPVC pipes 25 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 60 | S&F 20mm dia Brass TEE for CPVC pipe |
| 61 | S&F 20mm dia Brass elbow for CPVC pipe |
| 62 | S&F 25mm dia Tank Adaptor |
| 63 | S&F 25mm dia union |
| 64 | S&F 25mm dia Ball Valve |
| 65 | Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed by Engineer-in - Charge. |
| 66 | S & F in repairs 600 x 450 mm size beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers all as specified and directed by Engineer - in - Charge . |
| 67 | S & F in repairs stainless steel sinks with drainage board made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, fixed in repairs, complete all as specified. |
| 68 | Dismantling water tanks of capacity exceeding 500 and not exceeding 1000 ltrs all as specified and directed by Engineer - in - Charge. |
| 69 | S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed by Engineer - in - Charge . |
| 70 | M&Lball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and as directed by Engineer-in-charge. |
| 71 | S&F in repair vitreous china colouredOne piece EWCs with integrated cistern, seat cover , jet spray and twin flush fittings and including P or S trapetc. all as spfd and completed( Cat part CARVEL of Cera or Equivalent ) |
| 72 | S&F in repairvitreous china pedestal pattern wash hand basin (flat back) white of size 550x400mmincluding one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector,including cutting for and pinning in ends of brackets completeall as specified. |
| 73 | S & Fin repairs PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engineer - in – Charge. |
| 74 | S & F in repairs bib taps, long body,fancy type cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified. |
| 75 | S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified. |
| 76 | S&F in repairs Fancytype single leaver wall mixer with provision of hand shower, but without hand shower cat No DRC-37119 make Jaquar or equivalent out of makes spd in list of makes of any colour, 15mm chromium plated screwed down for iron pipes or brass ferrule complete all as specified and as directed. |
| 77 | S&F in repairs fancy type CP pillar tap single leaver basin mixer without popup waste system with 450 mm long braided hoses cat No DRC-37011B make Jaquar or equivalent out of makes spd in list of makes of any colour for basin 15 mm dia screwed down high pressure with long screwed shank sand fly nuts screwed for iron pipe fixed as in repairs complete all as specified and as directed. |
| 78 | S & F in repairs chromium plated shower rose 125mm sizeincl shower arm casted 3000 mm long flat shape for wall mounted showers with flangeinclfixing to steel pipe or union all as specified and directed by Engineer - in - Charge. |
| 79 | S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directed |
| 80 | S & F in repair CP paper holderof Make-AKP-35751P of Jaquar or equvelent in kohler. complete all as specified and directed. |
| 81 | S&F in repair Kitchen plate rack of stainless steel ofsilver colour,1 mm thick of size 900mmx1200 mmx 250mmincluding fixing with screws complete all as spcified and as directed. |
| 82 | S & F soap dish brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and directed by Engineer - in - Charge. |
| 83 | S & F in repairs Towel rack 600mm long with lower hangers complete all as specified and as directed. cat No AKP-35781P make Jaquar or equivalent out of makes specified in list of makes. |
| 84 | S&F in repairs 20-25 mm dia Aluminium curtain rod with powder coated along with ornamental attachment at both ends and one set of ornamental decorative MS clamps to fixed to walls complete all as specified and directed. |
| 85 | Demolition of stone slabs andtiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar. |
| 86 | M&L for 18-20 mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry @ 3Kg/Sqm, laid over and including 20mm thick cement and sand mortar (1:6) screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishinging damaged stone slab of any description complete all as specified |
| 87 | M&L for machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry @ 3Kg/Sqm, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 88 | M&L for Z-Black granite stone slab of sizes as directed(of any type) 20 mm thick on cooking platform,shelves etcmachine cut,bedded over 20 mm thick in CM1:4and jointed with grey cement slurry and pointed with white cement with admitures of pigment to match with shade of granite stone incl grinding and polishing compelte all as specified. |
| 89 | Dismantling/removing old damaged worn out APP of any thicknessincl screed bed or plastering of anythickness and removing the rubish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc any distance complete all as specified and as directed. |
| 90 | Cleaning the surface and made free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expantion contraction. Cutting the grooves with suitable cutter machine in \"v\" groove filled with Repair mortar/Microconcrete/General purpose grout as recommended proportionaly as per recommendation of manufacturer.Making of Gollas at all the corners with Polymer modified mortar(1:4 Cement:sand with 3.5% Acylic of cement weigth) and \"Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, membrane with an elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88 % solid content. The system includes final base preparation, epoxy primer 1:1(Resin:hardner) application with 100 % water dilutionand Pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg per SQM .Application should be done with Graco sprayer by a company authorised applicator. \" |
| 91 | 15mm thick rendering in cement mortar 1:4 on concrete/bricksurfaces and rendering is to be even and fairwith water proofing compound as permanufacturers instructions complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply only Integral water proofing compound |
| 93 | Cutting hole in brick wall built in cement mortar exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 , type B-1 all as specified and directed |
| 94 | S& F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters,gusset plates, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wiremesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165etc complete all as spd and directed. |
| 95 | Excavation(soft/loose soil) in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface |
| 96 | M&LCement concrete Type B2 1:3:6 (40 mm graded aggregate) asin foundation filling and mass concrete for column post |
| 97 | M & L Mild steel work as in roof trusses including special shaped washers etc complete using ERWor induction butt welded tubes coforming to IS 1161-1979 grade st-240 etc including a shop coat of red oxide primer complete all as speciied anddirected. |
| 98 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 99 | S&F factory made uPVC white colour casement three track sliding Door with frame including 02 nos of Glazing door shutter & 01 nos SS wiremesh door shutter of extruded profiles with wall thickness of 2.0mm (+/0.2mm). Frame profile with hollow section with multi chamber, frame (112mmx69mm) with track RailI : Ri-14.5mm x 30.5 mm (1.20 mm),Sliding Sash 62 mmx24 mm with track rail 33mmx36mmx27.55 mm including flymash sash : 62 mm x24 m will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket , frame will be fixed to the wall with 8mm x 100mm long fasteners.Hardware : [ S-1 sliding popup handle made of zinc alloyed (while powder coated) ,Butt hinges of zinc alloyed (white powder coated) transmission gear made of mild steel with multi point locking system , Double wheel adjustable roller with single grooveand 6 mm thick toughened glazing with selected quality glass complete all as specified and as directed. Note : Selected quality clear Glassandmeshcost of all other connected accessories deemed included in unit rate. Net opening will be measured for payment purpose. |
| 100 | Dismantling of cast iron or reiforced concrete drain pipes jointed in cement mortar and taking out from trenches 100 / 75 mm bore (sand cast) all as specified and directed by Engineer - in - Charge . |
| 101 | Taking up/down AC soil ,waste and vent pipe 100mm bore size set in CM all as per specified and directed from walls complete all as specified and directed |
| 102 | S&F110mm PVC (SWR) pipes single socketed in any length along with rubber ring joint fixed to walls with all accessories complete all as specified and directed. |
| 103 | S&F PVC bend any radius 110 mm bore complete all as specified and directed. |
| 104 | S & F110mm ,PVC branch pieces (Tee) single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed with cement joint complete all as specified and directed |
| 105 | S&F75mm PVC (SWR) pipes single socketed in any length along with rubber ring joint fixed to walls with all accessories complete all as specified and directed. |
| 106 | S&F PVC bend any radius 75 mm bore complete all as specified and directed. |
| 107 | S&F PVC SWR floor trap with grating including jointing with solvent cement 75 mm dia. |
| 108 | S&F PVC SWR P- trap with grating including jointing with solvent cement 110 mm dia. |
| 109 | M&L for RCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate)as in chajjas / cooking shelves/ Tank staging platformetc. and the like including 5mm thick rendering in cm 1:3 finished even and smooth without using extra cement to the surface in contact with form surface complete all as specified and as directed by Engineer-in-Charge (The rate quoted by the contractor shall included forform work.) |
| 110 | S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 111 | S&F in repair Sheet glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long. |
| 112 | S&F in repair Sheet glass Corner Shelf assembly consisting of 5.5 mm thick sheet glasswith chromium plated bracket guard and railing 60 cm long. |
| 113 | Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete completeall as specified. |
| 114 | Mild steel framed work conforming to Fe-290 Gde E-165 quality-A as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, barred iron doors including side hung gates with pintel hinges, spops, hand made sliding bolts, framed work of water tanks, door chowkats and similar works complete all as specified |
| 115 | Mild steel bolts (machine made) with screwed on end with hexagonal or square nuts and washer other end 8-10 mm dia of neck andexc 5 cm long but n exc 10 cm long complete all as specified. |
| 116 | Supply only chain link MS hot dipped galvanised coating fencing any size or type as complete all as specified. |
| 117 | Mild steel roundbars 10mm dia and over cut to length, bent to shape required including bending spirally , hooking ends and binding with mild steel wire or securing with clips or welded to MS angle conforming to Fe-410 Gde E-250 quality- A etc complete all as specified. |
| 118 | Fixing onlychain link fencing including line wires any mesh, size and type to any type of standards, rail, straining bolts etc including provision of binding wire etc complete all as specified. |
| 119 | S & Fin repair 1.8 mm thick Fibre glass reinforced translucent plane sheeting fixed with coach screw and washer in roof/wall/frame etccompleted all as specified. |
| 120 | Dismantling Brick tiles or terracing tiles, single layer on roofs, etc complete all as spd and directed. |
| 121 | Demolation of mudin roof any thickness incl plastering & leeping removed complete all as specified and directed by Engineer-in-Charge. |
| 122 | M&L Plain cement concrete (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified |
| 123 | Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified. |
| 124 | M & L for 75 mm thick, Cement concrete type D-2, 1:4:8 (40mm graded aggregate), etc completed all as specified. |
| 125 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approveddesign & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required pattern over and including 25 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand. |
| 126 | Chequered cement concrete tiles 30 cm x 30 cm x 30mm thick in floors / path set,jointed & pointed in neat cement slurry using grey cement and no pigment laid over and including 15mm thick screed bed in cement mortar (1:6) including necessary cutting as per site requirement complete all as specified. |
| 127 | Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping including necessary formwork completeall as specified. |
| 128 | Taking down old point wiring complete for light/fan/socket(5/15 Amps) bell point etc complete with all light fittings accessories, such as switch sockets 5/15 Amps ceiling rose etc including making good to the disturbed surface to match with the existing complete all as specified and directed by Engineer-in-Charge. |
| 129 | Taking down existing ceiling fans any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/connectorcomplete all as specified and directed by Engr-in-Charge. |
| 130 | Taking down existing Gysers 25 ltrin position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from Metal clad to Gysercomplete all as specified and directed by Engr-in-Charge. |
| 131 | Taking down existing single /three phase electric energy meter of any capacity after disconnecting all necessary electrical connections and re fixing the same in Provn LT Indoor Panel cairfully after compltion of B&R Work complete all as specified and as directed. |
| 132 | Taking down carefully exsiting ceiling fan of any size, sealing cable end, dismantling blades and removing fan and blades and kept aside and deposited to MES yard. |
| 133 | Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 134 | Taking down old/unserviceabledistribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 135 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts gradeISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches,including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly includingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 136 | One light point control by one switch |
| 137 | One ceiling fan/exhaust fan control by one switch |
| 138 | One 3 pin socket outlet, 5 Amps independent |
| 139 | One 3 pin 5 amps socket outlet on the same board with other switches |
| 140 | One light point controlled by two 2 - way switch |
| 141 | One bell/buzzer point contolled by one push button independent |
| 142 | ditto as per item No. 130 above but wire 2.5 sq mm cable for switch socket outlet 3 pin 15 Amps with 2.5sq mm as earth continuity conductor complete all as specified and directed. (FOR 15 Amps socket point) |
| 143 | ditto as per item No. 130 above but wire 4.0sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sq mm as earth continuity conductor complete all as specified and directed. (FOR geyser/AC point) |
| 144 | S & F Modular switch one way 6 Amps, single pole 240 volts, ISI marked complete all as specified and directed. |
| 145 | S & F Modular switch two way 6 Amps, single pole 240 volts, ISI marked complete all as specified and directed. |
| 146 | Supply and fix ceiling rose three terminal surface bakelite 65/25 mm dia complete all as specified and directed. |
| 147 | S & F Modular socket outlet 2 in 1, 3 pin, 6 Amps complete all as specified and directed. |
| 148 | S&F Modular socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type, 240 Volts, ISI marked complete all as specified and directed. |
| 149 | S&F Modularswitch piano, flush type single pole 16 Amps |
| 150 | S&F call bell multi music type, AC 230 Volts, single pole complete all as specified and directed. |
| 151 | Supply and fixing Modularbell push flush type 6 Amps, single pole, ISI marked complete all as specified and directed. |
| 152 | S & F for Highly efficient LED Bulbs, 10 wattsin B-22 capcomplete all as specified and directed. Make Bajaj, Havells, HPL |
| 153 | Supply and fixing Inverter LED batten with squre profile and polycarbonate channel . Lithium lon battery with bcharging time 8 hourse -10 hourse and back up time upto 4 hours.with extrudedenvironmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connectedaccessories all as specified and directed. Make :Havells LHEXACP7FN1W020 or equivalent make of Bajaj / Philips / syska/Crompton/ Shakti as approved by GE. |
| 154 | Supply and fixing in repair lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 155 | Supply and fixing LED tube light fitting mirror type with high output diffuser 2 feet, 10 watts 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Havells/Philips/Crompton/Wipro |
| 156 | S & F for Decorativewall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 7 W LED lamp B22baseand including fixingof LED bulb 7 watts complete all as specified and as directed. Make Havells Cat No LHFOAJE1TZ1I060 or its equivalent in Philips, Wipro, Havells,Shakti. |
| 157 | S & F LED light fitting 1 x 9 W/ 1 x 10 W bulkhead luminaired including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.Make : Havells/Philips/Crompton/Wipro |
| 158 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep.Min air delivery 210 CFM with service value 6.00 BEE.Five star rated with brushless direct current motor (BLDC) |
| 159 | Supply and fixing modularstepped type electronic fan regulator flush type |
| 160 | Supply and fixin repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed. |
| 161 | S & F for sheet metal enclosure MCBDBSPN12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 162 | Supply and fixing240V 10KA \"B\" SP 6 to 32Amps curve miniature circuit breake (MCB)and current carrying capacity in the DB complete with connection testing and commissioning |
| 163 | Supply and fixing240V 10KA \"C\" SPN 63 Amps curve miniature circuit breake (MCB)and current carrying capacity in the DB complete with connection testing and commissioning |
| 164 | Supply and fix heavy duty single phase, steel body exhaust fan 300 mm sweep, 900 RPM complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener as approved by Engr-in-charge complete all as specified and directed. |
| 165 | M&L for earthing to LT panel board with mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm diaby means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 20 mm bore GI pipe medium grade for watering and 15 mm dia GI pipe light grade for protection of earth lead up to 7.5 mtr with funnel, wire mesh etc with and including testing complete all as specified and as shown in electrical plate No 3 of MES sch Part I. |
| 166 | Earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed or any other indicated situation for loop earthing etc.As required 4 mm dia galvanised iron or steel wire. |
| 167 | Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250/200 mm sweep with louver ,white in colour includingcutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. Make: Havells Model Ventil Air-DX White or equivalent in Crompton/Almonard/Havells |
| 168 | S & F in repair sub main wiring for circuit of size 6 sq mm 2 core (FRLS) alongwith earth wire of 6 sq mm single core of FRLS PVC insulated unsheathed cable,1100 volts grade with multistranded copper conductor including PVC conduit (conealed wiring) of suitable size complete all as specified and directed by Engr-in-Charge. (FOR SPN DB\"s & energy meter) |
| 169 | Supply and fixing in repair LED bldg security light fitting 35 watts 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including suitable size of GI bracket for mounting of security light to be bend as required shape, pipe bracket shall be made as per direction and site requirement and suitable size 02 Nos MS clamps and nuts and bolts.Make : Havells/Philips/Wirpo |
| 170 | S & F for Modular type TV Socket out let complete all as specified and as directed. |
| 171 | S & F for Modular type RJ 45 socket outletcomplete all as specified and direced. |
| 172 | S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for telephone and TV connectionsincludingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed. |
| 173 | Supply and fix and testing foranti suicide fan road 12 inch if the load on fan exceeds 22 kg , than the smartm rod / pice opens from its centere and spring in the pipe expands. Thus any one trying to hang from fan comes down safely complete all as specified and directed. |
| 174 | Sppply & Laying XLPE insulated,armoured, electric cable of size 25 sqmm 3.5 core withaluminium conductor,1100 volts grade, laid in trenches, fixed on poles / walls or passing through pipes including provision of necessary lugs and glands&makingnecessary connectionincluding taking down old unservicable cable of any corecomplete all as specified and directed, for the following :-Make Havells /polycab/ Finolex / RR Kabel Ltd. |
| 175 | Excavating in trenches, in any type of soilnot exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etcand getting out in any type of soil complete all as specified and directed. |
| 176 | Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.. |
| 177 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 178 | Supply laying and jointing GI pipe\"light grade\" 40 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittingscomplete all as specified and directed. |
| 179 | M & L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable completeallspecified and directed.(Note: Punned thickness shall be measured) |
| 180 | M & L for brick size sub class ‘B’ (modular size), laidflat in trenches for protection of cable complete allas specified and directed. |
| 181 | Supply, installation , commissioning and testing indoor type LT wall mounting Panel board of minimum size 0.95m (hight) x 0.90 m (breath) x 0.30 m (depth) factory made CPRI approved panel weather , dust & vermin proof indoore, double door, front openable , incuding four compartment for fixing of 04 No\"s single phase meter and MCB and providing glass view for reading of meter and providing rubber / PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB/MCB out put of suitable length for connection of cable from main busbar , made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame incuding applying two coats of powder coated paint over a coat of red oxide zinc chrome primer 415/440 volts grade including complete internal wiring with 4 sqmm copper wire and connections of all outgoing / directed existing cable of any size and removing of old unsv panel complete all as directed by Engineer-in-Charge (For G+1 MD Accn) provision of the following:- |
| 182 | BUSBAR - (a) Copper strip busbar of size 25x5 mm wrapped with PVC sleeves with maintained the colore code and provision of making holes with copper nuts, bolts , & washer for cable connection including hydrograpic insulatore with nuts & bolts at both ends- 05 No\"s(03Phase+01Newtral+01Earthing)Incoming- (b) MCCB IP 44 and IP 66/67 protection , 4 pole 415 volts, Lcu =25 KA breaking capacity , rating 100 Amps , adjustable thermal magnetic release including all fixing accessories with both ends spreader links - 01 No (c) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4\"x4\") squre dial with selector switch - 01 No\"s (Make : Legrand/Schneider/L&T) (d) LED Neon indicator lamp (RYB) with hilder, 230/250 volts, AC - 01 set (set of three) Make : AE/L&T Outgoing - (e) MCB Single pole & neutral 63 Amps, 240 volts, \"C\" curve 10 KA all complete as specified and as directed - 04 Nos, (f) MCB Single pole & neutral 32 Amps, 240 volts, \"C\" curve 10 KA all complete as specified and as directed - 01 Nos(f) Fixing only seviceable existing electric meter - 04 Nos (Obtained from existing Panel) Note: The rate including removing of extg single phase servicevle meter from u/s LT Indoor panel . |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
