|
| 1 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water upto 12 storeys height including necessary scaffolding and removing rubbish to outside MD land complete all as specified and directed |
| 2 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4,mixed with integral water proofing compoundwith weight of cement in top layer as per manufacturer\"s instructions and finished the surface even and fair without using extra cement upto 12 storeys height including necessary scaffolding complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 3 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 4 | M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and fair without using extra cement upto 12 storeys height including necessary scaffoldingcomplete all as specified and directed. |
| 5 | M&L for preparation of new platered surface of wall and applying two coats of 100% Premium acrylic emulsion paint, having dust repelling including chalking ,flaking, fading ,algae, fungal growth resistant and PU enhanced property , silicon enhanced, UV resistant ,VOC content not exceeding 50g/L ,dry flim thickness (DFT) minimum 100 micron (for 2 coats) ,over a coat of alkali resistant primerincluding applying one or more coat of wall care putty exterior grade to a smooth surface and making good any undulations on the surfacesincluding all necessary scaffolding upto 4 th storeys height,complete all as specified and directed.Note :-Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 6 | All as per item no 5 here in before but work for portion of building from five to eight storeys |
| 7 | All as per item no 5 here in before but work for portion of buildingabove nine to twelve storeys |
| 8 | M & L for preparing newly plastered surfaces of ceiling, etc and applying three coats of white wash upto 12 storeys height complete all as specified and directed. |
| 9 | M&L for providing PMM (Polymer modified cementitious mortar)upto 12 storeys height including necessary scaffolding :-(i) Dry sub strate surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 15 mm thickness.Note :Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed. |
| 10 | M&L for Providing & Pouring Micro concreting M-40 grade upto 12 storeys height including necessary scaffolding :-(i) Dry concrete substrate surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : MasterEmaco S46T of BASF or equivalent FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc (iv) use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period to carry out the complete work complete all as specified and directed.Note : (a)The cost of micro concrete M-40 grade & Epoxy bond coat is inclueded in this item. (b) Form work shall be 100% leak proof. |
| 11 | Complete removing the plants from the surfaces of the building upto 12 storeys height including necessary scaffoldingwith complete roots, applying recommended chemical to prevent further growth as directed, making good the disturbed surface with cement mortar 1:3 and applying the same surface finish of the existing surface and finished to match with the surrounding surfaces including removal of debris etc., out side the premises complete all as requiredcomplete all as specified and as directed. |
| 12 | M&L for preparation of old decorated surface of wall by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coats of 100% Premium acrylic emulsion paint, having dust repelling including chalking ,flaking, fading ,algae, fungal growth resistant and PU enhanced property , silicon enhanced, UV resistant ,VOC content not exceeding 50g/L ,dry flim thickness (DFT) minimum 100 micron (for 2 coats) ,over a coat of alkali resistant primer including applying one or more coat of wall care putty exterior grade to a smooth surface and making good any undulations on the surfacesincluding all necessary scaffolding upto 4 th storeys height,complete all as specified and directed.Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 13 | All as per item no 12 here in before but work for portion of building from five to eight storeys |
| 14 | All as per item no 12 here in before but work for portion of buildingabove nine to twelve storeys |
| 15 | M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | M & L for Preparation of oldpainted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 17 | Obliterating old writing of any description, n exc 0.1 sq. m, with synthetic enamel paint to match existing work complete all as specified and directed. |
| 18 | M & L for Writing letters or figures (Block ,Roman, Italicor Indian) n. exc 30 cm height with synthetic enamel paint complete all as specified and directed. |
| 19 | M & L for Writing stops, commas, shortlines , dashes, hyphens, brackets, etc with synthetic enamel paint complete all as specified and directed. |
| 20 | M & L for removing loose material from existing crumple joint upto 12 storey height including necessary scaffolding and reparing the groove of size 25 mm x10 mm with polymer bonding aid and mortar additive mixed in cement morter @ 02 lit per bag of cement including filling with two-part polysulphide sealantcomplete all as specified and directedMake: (a) Polymer bonding aid and mortar additive = NITOBOND SBR of M/S Fosroc or equivalent product ofM/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (b) Two-part polysulphide sealante = Thioflex 600 pouring grade of M/S Fosroc or equivalent product ofM/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. |
