|
| 1 | Dismantling floor, hearth or wall tilling including cement mortar bedding and rubbish off the premises complete all as specified and directed. |
| 2 | S&F for joint free non skid Ceramic tiles, coloured, 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 3 | S&F for glazed ceramic tiles, coloured First/superior quality300x450x6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engr-in-charge. |
| 4 | S&F for heavy duty exterior finish designer pavement tiles, coloured, superior quality, 300x300x10mm thick as in floors/ pavement etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 5 | S&F for 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor incl taking up or down old steel tubing and connections and removing to store or removing from sitecomplete all as specified and directed. |
| 6 | S&F for 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor incl taking up or down old steel tubing and connections and removing to store or removing from sitecomplete all as specified and directed. |
| 7 | Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm diaincl taking up or down old steel tubing and connections and cleaning for refixing complete all as specified and directed. |
| 8 | Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20mm diaincl taking up or down old steel tubing and connections and cleaning for refixing complete all as specified and directed. |
| 9 | Cutting chases in brick work, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing or concealed conduit wiring, etc., and making good, (cutting not exc 10cm girth) complete allas specified and directed |
| 10 | Cleaning and removing all scale and dirt, etc from water tanks of capacity exc 250 ltrs but n exc 500 ltrs from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position and writing date of cleaning with synthetic enamel paint with 75 mm text height in DD-MM-YY format, complete all as specified and directed. |
| 11 | S&F in repair rotational moulded,multilayer HDPE water storage tank (white colour three layer) of 500 ltrs capacity(Cylindrical vertical with closed top)ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMTfloat valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed. |
| 12 | S&F in repairBall valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe. (Minimum weight 15mm-142gms/ 20 mm - 210 gms /25mm-455gms/ 40mm- 690 gms) complete all as specified and as directed. |
| 13 | S&F in repairs PVC tank cover/lid for 500/1000 ltr over head tank complete including fixing the lid with the existing tank with PVC hinges and male and female locking system complete all as specified and as directed. |
| 14 | S&F in repair 5mm thick bevelled edge looking mirror of selected quality glass, mounted on wall with stainless steel struts and screw complete all as specified and directed. |
| 15 | S&F in repair PVC low level syphonic actionflushing cistern of 10 lit capacity including siphon, PVC float with ball valve, rubber cone and flush pipe,Brackets,450 long PVC connection pipe etc complete all as specified and directed. |
| 16 | S&F in repair SS Grating doom 125mm dia with/without waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified and directed. |
| 17 | S&F in repair bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. |
| 18 | S&F in repair 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms, complete all as specified and directed. |
| 19 | S&F in repair pillar taps 15mm bore,cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 20 | S&F in repair fancy type chromium plated brass stop cock/ angle valve for15mm bore pipe, fixed in repairs complete all as specified and directed. |
| 21 | S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 22 | S&F in repairs Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 23 | S&F in repairs stainless steel soap dish (oval) type including ss screws and wooden/ plastic cleats complete all as specified and as directed. |
| 24 | S&F in repair acrylic shelf assembly 12cm wide with guard 60cm longcomplete all as specified and directed. |
| 25 | S&F in repair PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts,complete all as specified and directed. |
| 26 | Supply only 32/40mm bore PTMT waste pipe of best quality,600mm long for wash basin and sink etc complete all as specified and directed. |
| 27 | S&F in repair SS waste coupling for wash hand basin with rubber washer plug etc complete all as specified and directed. |
| 28 | S&F in repair Abs Chromium plated shower rose 125 mm dia to 150mm dia with 190mm long arm, swivel joints, complete all as specified and directed. |
| 29 | S&F for SS peg set of four, fixed with PVC rowl plug and screws complete all as specified and directed. |
| 30 | Demolition and breaking up (salt glazed ware, AC, PVC) drain pipes of any diaset in cement mortar complete all as specified and directed. |
| 31 | S&F for 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed. |
| 32 | S&F for 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed. |
| 33 | S&F in repair PVC (SWR) bend with oval access doorany radius suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 34 | S&F in repair PVC (SWR) bend any radius suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 35 | S&F in repair PVC (SWR) branch piece, single (single Y or T) equal or unequal suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 36 | S&F in repair PVC (SWR) branch piece, single (single Y or T) equal or unequal suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 37 | S&F in repair vitreous china wash basin, white, flat back type of size 550x400mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed. |
| 38 | S&F in repair vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified anddirected. |
| 39 | Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf complete all as specified and directed. |
| 40 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed. |
| 41 | Refixing shutters in the same opening of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf including easing and adjusting including refixing the builders hardware complete all as specified and directed. |
| 42 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 43 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges shall be paid separately) |
| 44 | M&L for forming jambs, etc. to openings in CM 1:6 (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed. |
| 45 | S&F for 125 mm long, 12 mm dia SS Dash fasteners for door frames etc incl necessary drilling etc complete all as specified and directed. |
| 46 | S&F for 250mm long SS, sliding door bolt withhasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed. |
| 47 | S&F for 100 mm size SS butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 48 | S&F for 150mm size SS handle, fabricated type,fixed with screws complete all as specified and directed. |
| 49 | S&F for 100mm size SS handle, fabricated type,fixed with screws complete all as specified and directed. |
| 50 | S&F for 200mm size SS tower bolt, fabricated type,fixed with screws complete all as specified and directed. |
| 51 | S&F in repairs 250mm long SS, sliding door bolt withhasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed. |
| 52 | S&F in repairs 100 mm size SS butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 53 | S&F in repairs 150mm size SS handle, fabricated type,fixed with screws complete all as specified and directed. |
| 54 | S&Fin repairs 100mm size SS handle, fabricated type,fixed with screws complete all as specified and directed. |
| 55 | S&F in repairs 200mm size SS tower bolt, fabricated type,fixed with screws complete all as specified and directed. |
| 56 | S&F in repair Stainless steel tubing of 25 mm dia for curtain rod fancy typewith brackets including end cap(wall to wall or flush to wall) for securing to curtain rod complete all as approved by Engg-in Charge. |
| 57 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, aluminium frame, concrete or brick surrounds, glazed with puty or fixed with beads complete all as specified and directed. |
| 58 | S&F for figured glass 4mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 59 | S&F for Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5Sqm in each pane complete all as specified and directed. |
| 60 | Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed. |
| 61 | M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 62 | M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified & directed. |
| 63 | M&L for mild steel framed work such as grills, grates etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, framed and hung as gates including pintle hinges, stops, hand made sliding bolts etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 64 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 65 | S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 66 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 67 | S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 68 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 69 | M&L for 60mm thick M-35 grade factory made vibratorycompactedcement concrete rubber moulded, coloured (Red, Yellow or in combination) interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed. |
| 70 | M&L for Cement concrete1:4:8 type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed. |
| 71 | M&L for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof padding,in leveling course, benching, mud stops etc, complete all as specified and directed |
| 72 | Taking down cement or cement lime plaster any description fromwalls/ceiling etc including racking out joints, hacking for key & scrubbing down with water including removing of debries out side of MOD land complete all as specified and directed. |
| 73 | M&L for rendering 15 mm thick in cm 1:6 on on other than fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 74 | M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surface of ceiling and finished surface even and smooth without using extra cement complete all as specified and directed. |
| 75 | M&L for preparation of newly plastered surfaces of wall and applying two or more coats of Acrylic Smooth exterior paint of required shadeapplied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. |
| 76 | M&L for 1 mm thick wall care putty on external and internal wall over newly plastered or old decorated surfaces complete all as specified and directed. |
| 77 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. |
| 78 | M&L for preparation of new or previously untreated surfaces of steel or Iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red Oxideprimer complete all as specified and directed. |
| 79 | M&L for preparing plastered or unplastered old decorated surfaces of Ceiling and applying one coat of white wash on Ceiling surfaces complete all as specified and directed. |
| 80 | M&L for complete removal of existing treatment of walland applying 1 mm thick white putty in one or two coatand applying two coat oil bound distemper over a one coat of alkali resistant primer complete all as specified and directed. |
| 81 | M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. |
| 82 | M&L for preparing old paintedsurfaces of steelof any description not otherwise described,surfacesexc 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 83 | M&L for complete removal of existing treatment of wall and applying two or more coats of Acrylic Smooth exterior paint of required shadeapplied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over 1 mm thick wall care putty complete all as specified and directed. |
| 84 | M&L for preparation of existing new or old plaster surfaces including removal of existing treatment and applying two coat of Dr. fixit sure ceal damp proof chemical or Smartcare hydroloc water proofing of make Asian on plaster surfaces complete all as specified by the manufacturer. |
| 85 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire and taking down/dismantling of existing chain link fencing complete all as specified and directed. |
| 86 | Supply only chain link fencing made out of mild steel galvanized wire, dia not less than 3.00mm, 75x 75mm mesh sizecomplete all as specified and directed. |
| 87 | Dismantling RCC/Wooden fencing Post any section, including taking out embedded portion and making good disturbed ground; posts embedded in natural ground complete all as specified and directed. |
| 88 | Mild steel work as in swan necks for fencing, posts and struts including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe- 290-Gde E-165 complete all as specified and directed. |
| 89 | S&F in repair Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standrad rails straining bolts, including, securing or typing at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured). |
| 90 | Demolition of cement concrete reinforcedof any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 91 | M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole covers/drain cover with weep hole/ without weep holes etc including necessary form work set in CM1:4 complete all as specified and directed. |
| 92 | M&L for providingRCC 1:2:4 type B-1 using 20mm graded stone aggregateas in slab supported on walls , beams & columns etc asin roof & the like complete all as specified and directed. |
| 93 | Use and waste for formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works rough finished surfaces of concrete complete all as specified and directed. |
| 94 | M&L for mild steel TMTbars 8mm dia and over cut to length , bent to shape required including cranking bending etc and binding with mild steel wire (annealed ) not less than 0.90 mm dia as in reinforcement complete all as specified and directed. |
| 95 | De-silting/cleaning of drain bed from grass/loose earth, roots etc complete all as specifed and directed. |
| 96 | Removal of excavated material (soil)to a distance exc250 mtrbut n exc 500 m and depositing where directed at a level n. exc 1.50 mtr above the starting point complete all as specified and directed |
| 97 | M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in surface channels and drain complete all as specified and directed at site. |
| 98 | M&L for Providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed at site. |
| 99 | Extra for forming fair finished drain or channel 45 cm inner girth in cement, concrete, using extra cement, including forms, moulds, mitered/stopped end etc complete all as specified and directed. |
| 100 | M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 101 | Description same all as per Item No 100 here in above but except brickcomplete all as specified and directed. |
| 102 | M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 103 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surface with cm (1:4) finishing fair and even complete all as specified and directed at site. |
| 104 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed by Engineer-in-Charge. |
| 105 | M&L for complete removal of existing treatment of walland applying two coats of Cement Base Paintwhite or tinted of approved shade over a coat of alkali resistant primer complete all as specified and directed. |
| 106 | M&L for preparing oldpaintedbrick or conc surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 107 | M&L for running welding at site in repairs exc 6mm but n exc 9mm in length ,thickness of Metal to be welded not exe 06mm complete all as specified and directed. |
| 108 | M&L for welding at site in repairs exc 2.5cm but n exc 5cm in lengt in length ,thickness of Metal to be welded not exe 06mm complete all as specified and directed. |
| 109 | S&F for Ornamental and intricate design framed work of mild steel conforming to Fe-290 (Gde E-165) as in doors or gates including cutting, bending in required shape & design, welding etc framed & hung including pintle hinges, stops and hand made sliding bolts etc complete all as specified and directed at site. |
| 110 | S&F for concertina coil 600 mm dia (stretched position) hot dip galvanised including “U” and “C” clip, having 50 Nos of spirals in 8 mtr stretch length and composed of reinforced punched razor ribbon sides of cold rolled low carbon steel fixing of the “Y” of trapezoidal shaped angle iron brackets placed at 2.5 to 3 meter apart complete all as specified, shown in drawings and as directed. The barbs should have 180 degree straightness, razor edge cut with following specifications:-(i) Concertina coil confirming to IS-513, IS-4454 (Part-1) and IS-12753 (ii) Clips-18 SWG GI (iii) Wire dia-2.60 mm(iv) Razor blade tape length-20 mm (minimum) (v) Razor blade tape width- 14 mm (minimum) (vi) Razor blade thickness- 0.50 mm(vii) Clips per round of circle-05 Nos(viii) Zinc coating- 230 to 240 GSM heavy coating hot dip (ix) Tensile strength- 1620 N/ Sqmm (minimum) Note: (a)Horizontal razor wire and angle iron supports will be measured and paid separately under relevant items of Sch ‘A’/ BOQ. (b)Measurement will be made for stretched length. |
| 111 | S&F for hot dip galvanised razor wire fencing with 2.60 mm dia centre core wire having barbs of length 20mm (minimum), width 14mm (minimum) and thickness 50mm razor strip on swan neck angle iron and fixing with antirust clamps on angle iron post including all fittings like fastener clips, steel leg rings etc as shown in drawing complete all as specified and directed. The barbs should have 180 degree straightness, razor edge cut with following specifications.(i) Razor wire confirming to IS- 513, IS 4454 Part-I and IS-12753(ii) Zink coating- 230 to 240 GSM heavy coating hot dip.(iii) Tensile strength- 1620 N/Sqmm (minimum)Note: Each line of wire will be measured. |
| 112 | Cleaning of choked sewer lines of 100mm dia of any depth manually or through mechanical appliances and making sewer line functional , complete including working under , foul condition and depositing the sludge, rubbish etc off the premises at an isolated place to a distance exc. 1.5 Km but not exc 2 KM distance complete all as specified and directed. |
| 113 | Cleaning of choked sewer lines of 150mm dia of any depth manually or through mechanical appliances and making sewer line functional , complete including working under , foul condition and depositing the sludge, rubbish etc off the premises at an isolated place to a distance exc. 1.5 Km but not exc 2 KM distance complete all as specified and directed. |
| 114 | Cleaning of choked sewer lines of 200mm dia of any depth manually or through mechanical appliances and making sewer line functional , complete including working under , foul condition and depositing the sludge, rubbish etc off the premises at an isolated place to a distance exc. 1.5 Km but not exc 2 KM distance complete all as specified and directed. |
| 115 | Desludging of existing manholes of depth upto 1.50m filled with sludge by means of manually or through mechanical appliances complete including working under foul condition and depositing and removal of sludge , rubbish etc off the premises at an isolated place to a distance exc. 1.5 Km but not exc 2 KM complete all as specified and directed |
| 116 | Desludging of existing manholes of depth upto 1.50m and not exc. 3.00m filled with sludge by means of manually or through mechanical appliances complete including working under foul condition and depositing and removal of sludge , rubbish etc off the premises at an isolated place to a distance exc. 1.5 Km but not exc 2 KM complete all as specified and directed |
| 117 | Desludging of existing manholes of depth more than 3.00m filled with sludge by means of manually or through mechanical appliances complete including working under foul condition and depositing and removal of sludge , rubbish etc off the premises at an isolated place to a distance exc. 1.5 Km but not exc 2 KM complete all as specified and directed |
| 118 | Cleaning and desludging by pumping out sludge water by septic tank cleaning truck i.e. Honey Sucker (The capacity of the truck is 6,000 litres) from existing chocked /blocked septic tanks including taking out all sediment sand , dirt ash, grease fibre or vegetation, foreign materials etc from any depth and size of septic tanks including removing of sludge to distance exc. 3.00 Km but not exc. 5.00 Km away and buried under ground complete all as directed. |
| 119 | Dewatering ofexisting soak well of following sizes by means of manually or through mechanical appliances and discharging waste into nearby drain, including taking out, foreign materials etc complete all as specified and directed for the following sizes :-. |
| 120 | (a) Soak well 1.80m dia and 3.00 m deep |
| 121 | (b) Soak well 2.40 m dia and 3.00 m deep |
| 122 | Cleaning of choked WC in ground floormanually or mechanical upto first man holes and makingfunctionalincluding working underfoul condition complete all as specified and directed.(Note : - The rates quoted are deemed to be included opening of accessdoor and closing etc as required at site) |
| 123 | All as per srl item No 121 here-in-above but of WC in other than ground floors complete all as specified and directed. |
| 124 | Cleaning offloor trap / Nahani trap / gully trap upto first manhole complete all as specified and directed. Note :The rates quoted are deemed to beincluded of accessdoor and closing all as specified and directed . |
| 125 | Excavation in trenches n.exc 1.50 mtr wide and n. exc 1.50 mtr depthfor foundation etc or for shafts , wells, cesspits , manholes , pier holes etc n.exc 10 Sqm on plan & n. exc 1.5 m in depth andgetting out in soft/loose soilcomplete all as specified and directed. |
| 126 | Removal of excavated material (soil)to a distance n. exc 50 mtr and depositing where directed at a level n. exc 1.50 mtr above the starting point complete all as specified and directed |
| 127 | Returning filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in soft/loose soil complete all as specified and directed. |
| 128 | M&L for 150 mm bore Double Wall Corrugated (DWC) Pipes with integral sockets of SN 4 stiffness class conforming toIS:16098laid in trenches and jointed with EPDM rubber seal and SILAID rubber lubricant etc complete all as specified and directed |
| 129 | M&L for 200 mm bore Double Wall Corrugated (DWC) Pipes with integral sockets of SN 4 stiffness class conforming toIS:16098laid in trenches and jointed with EPDM rubber seal and SILAID rubber lubricant etc complete all as specified and directed |
| 130 | M&L for cement concrete aggregatebed to drain pipe 150 mm dia including packing under and haunching againstthe sides of pipe after they are laid and testedin cement concrete 1:4:8 type D 2 using 40mm graded stone aggregate complete all as specified and directed. |
| 131 | Description same all as per item no 130 here in above but for 200mm dia pipe complete all as specified and directed. |
| 132 | Cutting into existing man holes for connecting new drains making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or ¾ in section) in cement concrete 1:2:4 type B-1(using 20 mm graded stone aggregate) surface smooth finished and reforming benching as required for internaldia of pipe 150mm all as specified and directed . |
| 133 | Description same all as per item no 132 here in above but for 200mm dia pipe complete all as specified and directed. |
| 134 | M&L for 75mm thick cement concrete type B-2 1:2:4 (using 40mm graded stone aggregate) as in flooring, finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 135 | Extra for farming fair finished drain or channel 30 cm inner girth in cement, concrete, using extra cement, including forms, moulds, mitered/stopped end etc complete all as specified and directed. |
| 136 | S&F for PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 160mm bore complete all as specified & directed. |
| 137 | S&F for PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, laid in trenchs or floor 110mm bore complete all as specified & directed. |
| 138 | S&F for PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore complete all as specified & directed. |
| 139 | S&F for PVC (SWR) shoe any radius, 160mm bore completeall as specified & directed. |
| 140 | M&L for PCC 1:3:6 type C-1 for embedding of 160 mm bore shoe incl making of 200 mm long drain channel finished even and smooth using extra cement complete all as specified and directed at site. |
| 141 | S&F for PVC (SWR) bends any radius, 110mm bore completeall as specified & directed. |
| 142 | S&F for PVC (SWR) bends any radius, 75 mm bore completeall as specified & directed. |
| 143 | S&F for PVC (SWR) Junction single ( Y or T) equal or unequal 110mm dia complete all as specified and directed. |
| 144 | S&F in repair PVC (SWR) floortrap plain with grating in cluding jointing with solvent cement 75/100mm dia complete all as specified and directed |
| 145 | S&F in repair PVC (SWR) nahani trap plain with grating in cluding jointing with solvent cement 75/100mm dia complete all as specified and directed |
| 146 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 147 | M&L for two coat cement base paint on wall over one coat cement primer including preparing new or old plastered surfaces complete all as specified and directed. |
| 148 | Taking down old exisitng interlocking tiles with sand cushion size and shape and refixing in same position after procing sub base PCC for raising the height with and incl 25 mm thick sand cushion complete all as specified and directed. Note: Sub base PCC will be measured separately. |
| 149 | Supply and applying for component elastomeric acrylic polymer modified cementitious water proofing coating smart care damp block 2K Suprema of Asian make in 2 coats over the prepared surfaces (wall/ sunken floors) at a coverage of 1.5 Kg/Sqm. The coating shall have 80% elongation as ASTM D412 resisting 5 Bars hydro static pressure as per D1N 1048 reduction to rapid chlorides shall be 70 as per D1N 1048, crack bridging upto 1.2m as per ASTM 45485. The coating have food grade certificate from laboratories like CFTRI. The max ratio of coating shall be 2 Part of powder & 1 part of liquid within any water addition in the mixing etc complete as per manufacturer specifications. (ii)After the surface dried, plaster the surface with CM 1:4 15mm thick.(iii) Demolition of lean concrete with existing treatment, taking out removing from site and M& L for PCC 1:5:10 for filing of sunken portion is deemed to be included in the rates. |
| 150 | S&F in repairs stop valve cast copper alloy screwed down for high pressure with crutch or butterfly handles screwed both ends for iron pipe and fixedfor 15 mm bore pipe complete all as specified and directed. |
| 151 | M&L in repair 250 MM dia Reinforced concrete pipes, class NP2, laid and jointed complete all as specified and directed. |
| 152 | Dismantling of stone slab and tiles laid bedded and pointed of anydescription or thickness in floors, aprons etc complete all as specified and directed. |
| 153 | M&L for rubber moulded chequered cement concrete coloured tile 30cm X 30cm X25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor all as specified including dismantling of tiles complete all as specified and directed. |
| 154 | Schedule of Credit (MINUS) Rs. 76,607.00 B/F from Serial Page No.[Note : Detailsof items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum |
