|
| 1 | Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified |
| 2 | M&L forbrick work with sub class \"B\" brick in cement mortar 1:6, straight or curved on planexc 6 m mean radius, complete all as specified |
| 3 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. |
| 4 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 5 | M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified. |
| 6 | M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cuttingpolishing and rubbing complete. |
| 7 | Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid. |
| 8 | S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws toframe work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat40 X 3 mm size 60 mm longall as specified and directed by Engr-in-Charge. |
| 9 | Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed. |
| 10 | M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified. |
| 11 | M&L for vitrifiedcoloured tiles 8 to 10 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15 mm th screed bed in CM 1:6 complete all as specified and directed. |
| 12 | All as per item No 11 above but on skirting over 8 to 10 mm th rendering in CM 1:4 complete all as specified and directed. |
| 13 | M&L for glazed coloured ceramic tiles350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with & including backing coat 10mm thick in CM 1:4complete all as specified and directed. |
| 14 | Demolition ofconcrete ( unreinforced ) in ground floors and paving n. exc 15 cm thk (below or above ground level) |
| 15 | M & L 75 mm thk Cement conc type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair . |
| 16 | M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thickas insub base complete all as specified. |
| 17 | M&L for laying machine pressed precast concrete interlocking reflective coloured (Glozy Finish) pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified. |
| 18 | M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neatgrey cement&pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified. |
| 19 | Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified. |
| 20 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified |
| 21 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified. |
| 22 | M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls. |
| 23 | M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemperon walls over and including a coat of alkali resistance primer. |
| 24 | M & L for Complete removal of existing treatment of surface finishon wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped with wall care putty (3 mm thick) and applying one coat of primer with twocoat of oil bound distemper complete all as specified. |
| 25 | Complete removal of existing treatment from old decorated surfaces of walls, prepration of surfaces, priming with alkali resistant priming paint andapplying twocoat of cement base paintcomplete all as specified & directed by Engineer-in-Charge. |
| 26 | M & L for Preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of tint approved byEngr-in-charge complete all as specified. |
| 27 | M & L for Preparing old painted steel & iron surfaces of any description over 10 cm in width or girth ,including roof and applying one coat of synthetic enamel paint of tint approved byEngr-in-charge complete all as specified. |
| 28 | Dismantling asbestos cement / CGI(corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed. |
| 29 | Dismantling MS worksof any Desc. Not otherwise provided for |
| 30 | Excavation inpost holes or similer holes each nexc. 0.5 cum getting out returning filling in and ramming eartharound in layers n. exc 25 cm,watering , and removing surplus soils to a distence nexc 50m and making good surface in hard soils,complete all as specified. |
| 31 | M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete forpost. |
| 32 | S&F TubularSections as in main cross beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) |
| 33 | M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc. |
| 34 | S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr In Charge. |
| 35 | All as per item No 34 above above but plain sheet fix in valley gutter / ridge |
| 36 | M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxideprimer. |
| 37 | Dismantling ofPVC water tank of capacity exc 500 litre and n. exc 1000 litre andcomplete all as specified and directed. |
| 38 | Dismantling ofPVC water tank of capacity exc 250 litre and n. exc 500 litre andcomplete all as specified and directed. |
| 39 | S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes. |
| 40 | All as per item No. 39 above but 1000 litres. |
| 41 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltr , etc. |
| 42 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltr , etc. |
| 43 | Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store. |
| 44 | All as above item No 43 but n\"exc 1.5 Sqm each. |
| 45 | Taking downshutter of any descriptionexc. 1 sqmbut not exc 2 Sqm each complete all as specified and directed. |
| 46 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing and directed by Engr-in-charge. |
| 47 | S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \" C \"Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. |
| 48 | S/F 30mm thik flush shutter solid core construction with block board core and plywood face panels commercial type on both sides |
| 49 | S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge(divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shuttersas specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified. |
| 50 | S&Ffor pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125X 60mm. |
| 51 | S&Ffor pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm. |
| 52 | Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts oringins measuredfrom the face of the jamb into wall exc half brick but no exc one brick. |
| 53 | Supply and fixing three track sliding window including frame with two shutters with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc; fabricated using following aluminium anodised sections conforming to catalogue of \"JINDAL\" or of equivalent make complete all as specified and directed by Engineer-in-Charge.(a) Bottom frame - 20620(b) Top frame & vertical - 20621(c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844(f) Glazing clips - 19352. (Note:- Cost of Tinted glass & wire cloth shall be included in the quoted rate of the item). |
| 54 | S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. |
| 55 | S&F 3.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n\"exc .5 sqm in each pane. |
| 56 | S & F of 150 mm long aluminium anodised barrel tower boltcomplete all as specified and directed. |
| 57 | S & F of 150 mm long extruded anodised aluminium alloy handle,complete all as specified and directed. |
| 58 | S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete. |
| 59 | S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed. |
| 60 | Taking up or down steel tubes and connections including cleaning for refixing or removal to stonesbore of pipe 15mm. |
| 61 | All as per item No. 60 above but bore of pipe 20mm |
| 62 | M&L Supplying and laying of 16 mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches concealed complete all as specified |
| 63 | M&L Supplying and laying of 20 mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches concealed complete all as specified |
| 64 | S & F in repairs Brass cromium platedwith capstan headsshower rose of 125 mm dia complete all as specified. |
| 65 | S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified. |
| 66 | S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed. |
| 67 | S&F as in repairsPVC low/highlevel flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets). |
| 68 | S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs . |
| 69 | M & L for preparation of newwooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 70 | S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete |
| 71 | S & F in repair 300mm, ordinary rat tail rod pattern springs including roller androller plate complete |
| 72 | M&L For plain cement 1:2:4 type B2(usig 40mm graded stone agregate)as in Cement concrete in surface channels and drains complete all as specified. |
| 73 | Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc. |
| 74 | M & L in repairs 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR typeadhesive, fixed with screws to timber frame work as in cup board shutters, partitions, shelves and similar work. Complete all as specified and directed. |
| 75 | S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. complete all as specified and directed. |
| 76 | S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed |
| 77 | Providing and carrying out water Proofing treatment to toilet, sunkan slabs, wet areas ets, after proper surface prepration, carry out cementitious injection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, complete including 15mm thick cement plaster in CM 1:4 all tools and plant as per manufacturers specification including removal & refixing of fixtures complete all as specified and directed by Engr-in Charge.. |
| 78 | Demolition & breaking up drain pipes (SWG, AC, RCC etc) set in CM int dia of pipe 100mm with all fittings . |
| 79 | All as per item No. 78 above but 75mm dia pipe with all fittings. |
| 80 | S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 110mm dia pipe |
| 81 | S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 75mm dia pipe |
| 82 | S&F PVC (SWR) bend 110 mm dia all as specified and directed |
| 83 | S&F PVC (SWR) bend 75mm dia all as specified and directed |
| 84 | M&L for rendering 10mm thick in CM 1:4 on concrete surfaces over roof slabs with admixture of integral water proofing compound @ 3% by weight of cement (WPC shall be measured & paid seperately) |
| 85 | Supply only integral water proofing compound |
| 86 | M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned toremove all foreign materials & dust to receive primer.(b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction.(c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat as reinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint.(d) The overlap while torching shall be 75mm on longitudinal direction& 100mm on transverse direction. Note:-Obtain material through out low laying Area |
| 87 | S/F 40 mm dia PVC pipe(out from sunken portion) for spout. |
| 88 | S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-charge. |
| 89 | S& f in repair vitreous china urinal ,Half stall type ( back or corner wall type) complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing Urinal to plug with and including 60 mm long brass screw ,pointing around urinal back in cement including urinal spreaderof PTMT any colour for fixing with 15 mm dia pipe,pvc conection 15mm x 600 mm long ,waste coupling of PTMT (Half or full threaded) 40 mm dia complete all as specified and directed by Engr-in-Charge. |
| 90 | S& F in repairs stainless steel Kitchen plate rack made of 0.63 mm thick stainless steel sheeet of size 750mm x 900 mm x 250 mm fixed to wall with screws complete all as specified and directed by Engr-in-charge. |
| 91 | Petty repairs to joinery work such as easing of doors,windows,kitchen cabinets,refixing builder hardware guageetc by providing glue,nails,and screw to the satisfaction of user and other misc carpentary works assigned by the Engineer-in-Charge. Note:- Replacement of builders hardware if required shall be measured and paid saperately) |
| 92 | Petty repairs to Alluminium joinery works such as alluminim door,alluminim windows ,alluminium ventilator,and like similar work such aseasing of doors,refixing of doors,windows,,refixing builder hardware such as alluminium beading to thesatisfaction of user and other misc carpentary works assigned by the Engineer-in-Charge. Note:- Replacement of builders hardware if required shall be measured and paid saperately) |
| 93 | S& F in repairs 15mm Ball valves, high pressures of PTMT, withepoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) (Make: Prayag/Shakti) complete all as specified and directed. |
| 94 | All as per item No. 93here- in- before but size 20mm dia and Minimum wt (for 20mm -210gms) (Make: Prayag/Shakti) |
| 95 | S& F in repairs 15 mm bore Stop valves/, cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 96 | S& F in repairs 15 mm bore Stop valves/angle valve, fancy type chromium plated cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 97 | S& F in repair 15 mm borebib tap,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 98 | S& F in repair 15 mm bore long body bib tap, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 99 | S&F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed. |
| 100 | S&F in repair 15 mm Brass CP Wall Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 101 | S&F in repair 32mm waste fittings, brass, chromium plated for wash hand basins,sinks etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed. |
| 102 | S&F in repair Grating doom 125mm dia of stainless steel with hole/without hole complete all as specified and directed. |
| 103 | S&F in repair15mm PTMT Bib tap standard of any colour screwed, for iron pipe and fixed complete all as specified and directed. (Make: Prayag/Shakti) |
| 104 | S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge |
| 105 | S&F in repair soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed. |
| 106 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 107 | All as per item No. 106here- in- before but 600mm long. |
| 108 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 109 | S&F in repair PVCseat cover forEWC of white colour complete all as specified and directed. |
| 110 | S&F in repairs stainless steel curtainrod 25 mm diacomplete with bracket and side knobs all as specified and directed. |
| 111 | S&F in repairs floor door stopper, with 150 mm longof Aluminium body and tounge with hard drawn steel spring in floor |
| 112 | S&F in repair stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. |
| 113 | S&F in repair 200mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. . |
| 114 | S&F in repair 250mm long sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 115 | S&F in repair of 150 mm long extruded anodised aluminium alloy handle,complete all as specified and directed. |
| 116 | S&F in repair door closer hydraulically regulated,designation No.1universal type,, Aluminium body suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed. |
| 117 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-charge. |
| 118 | S&Fin repair Towel rail 450mm long of PTMT fixed with and including chromium platedbrass screws and wooden/plastic cleatscomplete all as specified and as directed. |
| 119 | S&F in repair water tank cover for tanks of size 500 ltr or 1000 ltrs complete all as specified and directed. |
