|
| 1 | Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) |
| 2 | Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) |
| 3 | Taking down shutters of any description not exc 2 Sqm each. |
| 4 | M&L Mild steel frame work as in door chowkhats with angle ironwelded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hinges 100 mm size,and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats( Butt hinges paid sep) all as spd. |
| 5 | S&F 35 mm thick 2nd class hard wood glazed and skelton shutter devided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSS Part - I section 8 clause 8.24 (b). |
| 6 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 7 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 8 | S&F Floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring, fixed to shutters,complete all as specified and as directed. |
| 9 | M&L aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section85 mm x44.45 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm as directed and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required includingalu handle 150 mm ,tower bolt 150 mm,floor spring heavy duty \"SAMRAT\" ,looking arrangement \"GODREJ\" rubber gasket and door stopper complete all as specified and directed. |
| 10 | M&L aluminium alloy powder coated windows including aluminium coated frames, silding track frame and bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazingclips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed |
| 11 | S&F aluminium ventilator partly glazed/ gauzed including including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.provision for fixing the exhaust fancomplete all as specified and as directed |
| 12 | Servicing and greasing of aluminium door including replacement nut , screws rubber gaskets, pivot, taper clip etc including taking down carefully of door shutter for replacing unserviceable parts/components by new parts /components for smooth functioning of door and refixing the same in existing opening/position, complete,all as specified and directed. |
| 13 | S & F in repairSteel window (Factory made) double rebate, with side hung, shutter inclhinges, tower bolt, steel handle and peg stay complete with glaze and gauge shutters (both are complete) devotailed or welded includingmaking good to cutting holes with PCC 1:2:4 and complete finishing to cill and jamb corners with plaster and match all as specified |
| 14 | S & F in repairmild steel framed work such as grillsn gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders freamed balusters, walk ways, railings, framework of watertanks and similar work including aldrop and hinges holdfast etc conforming to Fe 290. Gde-E-165. |
| 15 | Cutting holes in Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4complete,all as specified anddirected. |
| 16 | S&F aluminium bodyhydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairscomplete,all as specified anddirected. |
| 17 | S&F MSbutt hinges medium weight 100 mm size fixed with MS screws. |
| 18 | S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws. |
| 19 | S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws. |
| 20 | S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut. |
| 21 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer |
| 22 | S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed. |
| 23 | Taking up or down Galvanised steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm |
| 24 | Taking up or down Galvanised steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm |
| 25 | Supply and fix galvanized steel tubing, 15 mm bore medium grade all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors compsite fitting such as (Nipple, Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc complete all as directed. |
| 26 | Supply and fix galvanized steel tubing,20 mm bore medium grade all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors compsite fitting such as (Nipple, Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc complete all as directed. |
| 27 | Supply and fix in repair figured glass pin head type 4mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary, complete all as specified |
| 28 | Complete removal of existing treatment by scraping, rubbing , brooming down,washing with water etc of old decorated surfaces plastered or unplastered surface of wall and applying two coat of oil bond distemper over one coat of putty on wall complete all as spcefied and as directed by Engr-in-charge. |
| 29 | Dismentling asbestos cement corrugated orsemi corrugated sheets in roof fixed with L hook or cranked bolt |
| 30 | Dismantling timber scantlings 40 Sqcm and over in section, in any position unframed work complete,all as specified anddirected . |
| 31 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 32 | S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed |
| 33 | M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd.Note: The application shall be executed on any type of surface and on horizontal/Vertical areas. |
| 34 | M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary [coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile/fibre, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge.Notes: (1) The work shall be executed through authorised applicator of manufacturer only.(2) Authrised Applicator shall be approved by GE before starting of work.(3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material.Engineer-in-Charge shall deface the original purchase vouchers.(4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Ten (10) years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor\"s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. |
| 35 | M & L for PCC 40 mm thick (Avg thickness) type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in roof complete all as specified and directed. |
| 36 | Schedule of Credit |
