|
| 1 | DSR’2023, Item No.6.34.2Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand) |
| 2 | DSR’2023, Item No.6.38Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. |
| 3 | DSR’2023, Item No.4.2.5Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | DSR’2023, Item No.5.22A.6Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level withThermo-Mechanically Treated bars of grade Fe-500D or more |
| 5 | DSR’2023, Item No.13.2.215 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) |
| 6 | DSR’2023, Item No.13.186 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning. |
| 7 | Market rateSupplying and filling with sand under floors, including watering, ramming, consolidating and dressing complete |
| 8 | Market rateProviding and fixing in position wall panelling at all heights with Aeroceil calcium oxide wood fiber board, density 1100 kgs minimum as per BIS , moisture content 9% +(-) 3%, modulus of electricity bending 3000 N/mm2, Bending strength 9 N/mm2, fire resistant , weather resistant, water resistant, biological termite resistant, sound frequency DB 30, chemically stable, pasted 9mm thick poly panel pasting with silicone adhesive, PET 60% recycled, pioneer green building material , comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sam including both sides)i.e. vertical studs of size 48x19 mm are placed at 600mm center to center in a floor and ceiling channel section of size 48x19 m fixed to the floor and sofit at600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horizontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. 48mm thickness is then to be inserted in the slots and finally calcium oxide wood fiber rigid square non-combustible panels/tiles are to be screw fixed with self-tapping pan head nickel coated mild steel screws of size 13 x3.2mm on to this grid leaving an even groove of 1 mm channel between the panels in which decorative steel rod will be installed. The joints between the panels are to be duly jointed and finished as per manufacturer\"s specification as per direction of Engineer-in-Charge all complete. |
| 9 | Market rateProviding & fixing of SBT make catalouge No-1809 or similar shades of Marvel / Nova/Vista make 100% Blackout Roller Blinds (polyester fabric, bright translucent, Acute screen, soft translucent etc.) with relevant roller arrangement complete and all accessories including material & labour etc. as directed by the Engineer-In-Charge |
| 10 | Market rateSupply and installation of W-W loop pile Aeroceil carpet of Aeroceil make Heritage, Product type with wear stability, Castor Compatibility, Antistatic, Light Fastness and evaluating their environmental performance and sustainability throughout their lifecycle, Loop pile, Pile content: 100% Polypropylene (SD), Primary backing: Woven PP, Secondary Backing: Felt backing, and Pile Weight of 850 GSM, Total Weight 1850 GSM, only pile height will be 5mm and total height will be of 8mm, Number of Knots: 65520 tufts/Sq.Mtr. Roll width will be of 4000 mm, Light Fastness of 5/5 on Grey Scale, Fire class- Pass 8/8. Heavy Commercial. The sub-floor should be completely dry,smooth, flat, dust free and resistant to compression and load bearing. Where seaming is necessary, a seam sealant must be used for such installation. Due to dye lot variation, actual colour may vary slightly from the sample. Chair,table and other heavy items legs pods and pvc or metal guards at the edge of stairs (not in scope) are recommended to prevent premature wear of caravelle carpet. The carpet & underlay (6-8 mm) to be fixed with appropriate adhesive on floor as per the manufacture’s specification and the appropriate floor surface as per the prerequisites of oem will be provided by the customer and the work and design is to be done as per Architect`s Specification and as per direction of Engineer-in-charge. |
| 11 | Market rateProviding and fixing Aeroceil make or equivalent Calcium oxide wood fiber board 30 mm thick for stage flooring , density 1100 kgs minimum as per BIS , moisture content 9% +(-) 3%, modulus of electricity bending 3000 N/mm2, Bending strength 9 N/mm2, fire resistant , weather resistant, water resistant, biological termite resistant, sound frequency DB 30, chemically stable, fitting chemical. Payment will be separately, complete as per the direction of the Engineer-in-charge. |
| 12 | Market rateProviding step nosing with Aluminium strips of size 45mm x 25mm of minimum 1 mm thick having PVC antiskid rubber capping and fixing inthe step edge with SS star screw of38mm x 8mm including cost of screws, labour, transportation,taxes etc. all complete as per the direction of the Engineer-in-charge. |
| 13 | Market rateMarket rateProviding and fixing the Seminar Room chair of Featherlite/Bonton/geeken/Godrej make and shall be confirming to BIFMA & AIOTA standards. The chairs shall have size of overall width 600-635mm, Overall height -1030 mm+10mm. Seat: size-450mm+10mm. (W) x 470 mm+10mm (D) x 150 mm+10mm (T) at front edge and 80 mm+10mm at rear edge. Seat to Back height shall be 740+10mmand back width shall be 460mm+10mm. Seat frame of ERW Tube / IS :3074-2005 GRADE 1-20 mm square Pipe 1.2 mm OR Mild Steel of size 20 X 5 mm flat “ C “ bend type. Seat shall be Auto tip and row numbering for seats along the aisles. Back: Back Rest frame of ERW Tube / IS :3074-2005 GRADE 1-19 dia Round Pipe 1.2 mm OR Mild Steel of size 25 X 3 mm flat bend as per ergonomic contour “ S “ bend to suit the body shape. The back polyurethane foam having density 50+5 Kg/m3 and shall be designed with contoured lumbar support for upright and tilted conditions. The seat & back frame should be nicely covered with a PPCP tray with 3 to 4 mm minimum wall thickness. It should comply with sound acoustic properties. The chair shall rest on the ground on two side panel frames (Side Panel/Aisle Panel). Stand shall be in tubular steel structure. Metal tube IS: 4923-1997- 80 X 40 mm, 1.63 Thickness. M.S. sheet metal frame formed in 1.6 mm. The side wooden panel must be 6 mm thick with fire retardant fabric upholster with a spacing of 560 mm. The side panels shall be fixed to the floor using 4 nos Grouting bolt - M 8 X 100 mm expandable anchor fasteners with chemicals for grouting. All Mild steel components will be epoxy polyester powder coated to 50-60 microns. The powder coating process shall undergo 7 step rust resistance pre-treatment process viz degreasing, pickling as per IS standard. After pre pre-treatment process, the components should be NANO coated and pacified for better adhesion of paint as per IS 3618. The arm rest shall be of Teak/Sal wood Tablet Mechanism having Combination of solid square bar with sheet metal plate. Writing Pad - MDF /pre laminated Board 12mm Thick Black Colour. Tablet Assembly shall be Foldable Type (can be folded inside the wing assembly when not in use). Tablet - Inclined 12 + 2° (Degree) From the Floor. The chair shall be under 5 year warranty and the agency has to submit the warranty certificate from the manufacturer. |
