|
| 1 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduits as required20mm (DSR 2025 it no. 1.21.1). |
| 2 | 25mm (DSR 2025 it no. 1.21.2). |
| 3 | Sub Head -II ( Wiring ) S/D of following sizes of FRLS PVC insulated copper conductor ISI marked single core cable in the existing surface/recessed steel/PVC conduit as reqd.1 X 1.5 sq mm (DSR 2025 Item no.1.17.1) |
| 4 | 3 x 1.5 sq. Mm (DSR-25/1.17.3) |
| 5 | 6 x 1.5 sq. Mm (DSR-25/1.17.6) |
| 6 | 9 x 1.5 sq. Mm (DSR-25/1.17.9) |
| 7 | 3 x 2.5 sq. Mm (DSR-25/1.17.12) |
| 8 | 6 x 2.5 sq. Mm (DSR-25/1.17.15) |
| 9 | 3 x 4 sq. Mm (DSR-25/1.17.21) |
| 10 | 6 x 4 sq. Mm (DSR-25/1.17.24) |
| 11 | 3 x 6 sq. Mm (DSR-25/1.17.30) |
| 12 | Sub Head -III(Switchgear and earthing)Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75mmX75mm) (DSR 2025 - Item no.1.27.1) |
| 13 | 3 Module (100mmX75mm) (DSR 2025 - Item no.1.27.2) |
| 14 | 4 Module (125mmX75mm) (DSR 2025 - Item no.1.27.3) |
| 15 | 6 Module (200mmX75mm) (DSR 2025 - Item no.1.27.4) |
| 16 | 8 Module (125mmX125mm) (DSR 2025 - Item no.1.27.5) |
| 17 | 12 Module (200mmX150mm) (DSR 2025- Item no.1.27.6) |
| 18 | Sub Head -III(Switchgear and earthing) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch (DSR 2025 - Item no.1.24.1) |
| 19 | 15/16 A switch (DSR 2025 - Item no.1.24.3) |
| 20 | 3 pin 5/6 A socket outlet (DSR 2025 - Item no.1.24.4) |
| 21 | 6 pin 15/16 A socket outlet (DSR 2025 - Item no.1.24.5) |
| 22 | Bell push (DSR 2025 Item no 1.24.8 ) |
| 23 | Supplying and fixing call bell/buzzer suitable for single phase ,230V complete as required.(DSR 2025- Item no 1.38 ) |
| 24 | Sub Head -III(Switchgear and earthing) Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way , Double door (DSR 2025 Item 2.3.2 ) |
| 25 | 12 way , Double door (DSR 2025 Item 2.3.3) |
| 26 | Sub Head -III(Switchgear and earthing) Supplying and fixing of horizontal type three pole and nuetral sheet steel MCB distribution board, 415Volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc., as required (but without MCB/RCCB/Isolator )4 way (4 + 12), Double door (DSR 2025 Item 2.4.1) |
| 27 | 6 way (4 + 18), Double door (DSR 2025 Item 2.4.2) |
| 28 | Sub Head -III(Switchgear and earthing)Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,\"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DBomplete with connections, testing and commissioning etc. as required.Single pole (DSR 2025 Item no.2.10.1) |
| 29 | Single Pole & neutral(DSR-25/2.10.2) |
| 30 | Supplying and fixing 63A rating, Four pole, 415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (MR) |
| 31 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.(DSR 2025 - Item no.1.25) |
| 32 | Sub Head -III(Switchgear and earthing) Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(DSR 2025 Item no.5.6) |
| 33 | Sub Head -III(Switchgear and earthing)Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.(DSR 2025 Item no.5.10) |
| 34 | Sub Head -III(Switchgear and earthing) Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. (DSR 2025 Item no.5.14) |
| 35 | Sub Head IV -Cabling Works Supply of PVC insulated and PVC sheathed XPLE power cable of 1.1 KV grade armoured UG aluminium conductor cable conforming to IS 7098 part 1 with up-to-date amendment of the following size as required. CABLE SIZE 3.5X 50 SQ.MM |
| 36 | CABLE SIZE 3.5 X 35 SQ.MM |
| 37 | CABLE SIZE 4 X 16 SQ.MM |
| 38 | CABLE SIZE 3 X 10 SQ.MM |
| 39 | Sub Head IV -Cabling WorksLaying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) (DSR 2025 -Item no.10.7.1) |
| 40 | Above 35 sq. mm upto 95 sq. mm(clamped with 25x3 mm MS Flat clamp) (DSR 2025 -Item no.10.7.2) |
| 41 | Sub Head IV -Cabling Works Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. Mm (DSR 2022 item no. 10.5.1) |
| 42 | Sub Head IV -Cabling WorksSupplying and fixing of light class G.I. pipe of 50 mm dia.(nominal) 3 metres length along the pole for protection of under ground cable as required. (DSR 2025 item no. 13.37) |
| 43 | Sub Head IV -Cabling WorksSupplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. .direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) (DSR 2022 item no. 15.16.1) |
| 44 | Sub Head IV -Cabling WorksSupplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 (22mm) (DSR 2025 item no. 11.1.7) |
| 45 | 4 X 16 (28mm) (DSR 2025 item no. 11.1.33) |
| 46 | 3.5 X 35 (32mm) (DSR 2025 item no. 11.1.21) |
| 47 | 3.5 X 50 (35mm) (DSR 2025 item no. 11.1.22) |
| 48 | Sub Head -V ( Fittings ) Supplying, installation, testing andcommissioningof 1x 20W Retrofit type Photon Ultra bright LED polycarbonate tubelight along withIndustrial Box type Luminaire batten suitable for singleT8 LED Tube on wall/truss for fixing LED tube including connection, testing as required. |
| 49 | Sub Head -V ( Fittings ) Supplying, installation, testing andcommissioningof 2x 20W Retrofit type Photon Ultra bright LED polycarbonate tubelight along withIndustrial Box type Luminaire batten suitable for singleT8 LED Tube on wall/truss for fixing LED tube including connection, testing as required. |
| 50 | Sub Head -V ( Fittings ) LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt).Supplying, installation, Testing & Commissioning of 45 watt Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%.(DSR 2025 item no. 8.12.11) |
| 51 | Sub Head -V ( Fittings ) LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt).Supplying, Installation, Testing & Commissioning of 50 watt Flood Light, powder coated pressure die cast aluminium body with built in or separate driver asper the requirement with Driver efficiency >85%,(DSR 2025 item no. 8.15.1) |
| 52 | Sub Head -V ( Fittings ) Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required (DSR 2025 item no. 13.34) |
| 53 | Sub Head -V ( Fittings )Supplying and fixing street light loop in loop out boxes with PVC Box of size 8\"x6\"x4\"with 1 No. 6A SP MCB, 2/4 way strip connector i/c testing as reqd. |
| 54 | Suppying and fixing 3 pin, 5Amp ceiling rose on the exisying junction box/wooden block including connection etc. as reqd.(DSR 2025- item 1.33) |
| 55 | Suppling and fixing suitable size G.I box with modular plate and cover in front or on surface or in recess including providing and fixing 25A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections,painting etc. as required.(DSR 2025- item 1.57) |
| 56 | Sub Head VII - Miscellaneous worksRemoving the existing aluminium wire from conduit, main board, sub-main boards, switch boards, tube light fittings etc., and shifting the same to stores etc., as required. |
| 57 | Sub HeadVIII - Credit ItemsLess credit for dismantled old damaged PVC insulated Al wire including transportation and disposal of the same from the site. |
