|
| 1 | Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge. including cartage of 5km .SNO.253+5KM cartage-loading,unloading.135+183.5-53=265.50 |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil. DSR2023 2.8.1 |
| 3 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate40 mm nominal size derived from natural sources) DSR2023 4.1.8 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation andplinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 2023 I.NO 6.1.1 |
| 5 | Providing, laying spreading & compacting of granular sub base (GSB) by providing close graded (Fr-1) materials, sprading in uniform layers with Mortor Graded on prepared surface, mixing by mix I n placed method with Rotovater at OMC and compacting with in layers with smooth wheeled Vibratory Roller to achieve the desired density, complete as per MoR &H clause 401& as directed by Engineer Incharge including all machine charges & including all labour, T& P etc req for proper completion of work. Analysis rate |
| 6 | Supply & Laying of precast concrete Block ( Interlocking tiles) for paving of thickness 60mm rubber mould GREY (Compressive strength not less then 30Mpa as specified in IS:15658 and weight 4.50kg) as jindal,naval or equivalant Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work as specified in IS 15658:2006. as directed by E/I. SN0.16 New item page 52 chapter 20 UPPWDSOR 2023-24 |
| 7 | Providing 50mm thick precast cement concrete Jali 1:2:4 (1 Cement : 2 Coarse sand: 4 graded stone aggregate 6mm nominal size), reinforced with 1.6mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. SI 31 DSR 16 5. 18.1 |
| 8 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mmnominal size derived from natural sources) dsr i.no 4.1.3 |
| 9 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) dsr 2023 i.no 13.4.1 |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete. dsr 2023 i.no 10.2 |
| 11 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat.SNO.31 New page44 SOR 2023 |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 2023 Item No. 13.62.1 |
| 13 | Supply and fixing R.C.C. sleeper/batton moulded bench, required as per direction of Engg I/C. Including fixing with necessary nuts and bolts in proper possition. (Analysis rate) |
| 14 | Suppy and instalation of See-Saw two seater item Code No SS-01 (make by royal Amusements) or equivalent quality as directed by E/I. MR SOR 2023 |
| 15 | Suppy and instalation of designer straight slidder (8 feet) item Code No SD-06D (make by royal Amusements) or equivalent quality as directed by E/I .MR SOR 2023 |
| 16 | Suppy and instalation of Swing 2 seater item Code No SW-02 (make by royal Amusements) or equivalent quality as directed by E/I . MR SOR 2023 Please Enable Macros to View BoQ information |
