Tender For Construction Of New Entrance Gate Along With Security Office Building Including Concrete Hardstand With Parking Shed And Landscaping At Foj Unit, Grse Kolkata, Kolkata-West Bengal

TDR : 52847205

Tender Notice
Corrigendum Details
BOQ

Expired

Kolkata , West Bengal

Tender Brief : Corrigendum : Tender For Construction Of New Entrance Gate Along With Security Office Building Including Concrete Hardstand With Parking Shed And Landscaping At Foj Unit, Grse Kolkata

Document Fees
₹ 500 /-

EMD
₹ 1000000.0 /-

Tender Value
Refer document

Submission Date
02-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	27-12-2025	[Corrigendum-ET-3340 ModSOTRPreBidMoM	Other	02-01-2026

ITEMS : CONSTRUCTION OF NEW ENTRANCE GATE ALONG WITH SECURITY OFFICE BUILDING INCLUDING CONCRETE HARDSTAND WITH PARKING SHED AND LANDSCAPING AT FOJ UNIT, GRSE KOLKATA

Sl. No.	Item Description
1	SURVEY, DESIGN & DRAWING
2	a)Detail survey, design and drawing as mentioned below are required for the construction of the New Entrance Gate,Security cum visitor\"s room & Security Office Buildingi)GA drawingii)Architectural drawing and detailingiii)3D View / Max Presentationiv)All Civil drawing and detailingv)Structural Drawing and detailingvi)Electrical Drawing and detailingvii)Structural design vetting of final design& drawing by Reputed college/University like IIEST/JU/IIT/NIT(All drawing should be submitted both in hard and soft copies along wthaAuto Cad files)
3	Detail survey (only landscaping area), design and drawing as mentioned below are required for the construction of the landscaping area & parking shed.i)GA drawingii)Architectural drawing and detailing including landscaping and Beautification workiii)3D View / Max Presentationiv)All Civil drawing and detailingv)Structural Drawing and detailingvi)Electrical Drawing and detailingvii)Structural design vetting of final design &drawing by Reputed college/University like IIEST/JU/IIT/NIT (only for parking shed)(All drawing should be submitted both in hard and soft copies along with Auto Cad files)
4	Detail survey of the proposed hard stand area using Auto Level/Total station and necessary design, drawing and detailing for the hard stand.(All drawing should be submitted both in hard and soft copies along with PDF & Auto Cad files)
5	CONSTRUCTION OF NEW ENTRANCE GATE, SECURITY CUM VISITOR\"S ROOM & SECURITY OFFICE BUILDING
6	Temporary barricagingthe gate area along with the adjacentnt area as necessary upto the existing height by using galvanised corrougated metal sheet or equivalent material and steel structural member as supporting frame along with providing of concentrinaand barbaide wire at the top of the barricading. The barricade should besafe, secure,strong andstableand The be theiruntil the gate construction work completed.
7	Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a Perimeter. including stacking of steel bars upto any height (Rates include the cost of steel scaffolding)
8	Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within Perimeter. upto any height (Rates include the cost of steel scaffolding)
9	Labour for lowering and stacking after dismantling in parts R.S. joists, channels, angles, tees, plates etc.complete as directed from any height
10	Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within unit premises
11	Earth work in excavation of foundation trenches or drains, in all sorts of soilincluding removing,spreading or stacking the spoils within Perimeter. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water,shoring as required complete.
12	Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect
13	Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.With earth obtained from excavation of foundation.
14	Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supplyof sand. (payment to be made on measurement of finished quantity)
15	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
16	Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
17	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.
18	Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456and as per technical specification of SOTR, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specificationincluding computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier] with concrete pump if required
19	Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.
20	Hire and labour charges forSteel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works
21	Plasterwith sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary .[including cost of chipping over concrete surface if requiredWith 1:4 cement mortar , 20 mm thick plaster
22	Plaster with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary [including cost of chipping over concrete surface] With 1:4 cement mortar , 10 mm thick plaster
23	Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including moulding and making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all completeincluding cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of each Granite slab > 0.6 upto 1.0 square metre. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]
24	125 mm thick brick work with 1st class bricks in cement mortar (1:4) ,including scaffolding/staging where necessary
25	Brick work with 1st class bricks in cement mortar (1:4),,including scaffolding/staging where necessary
26	Brick work with 1st class modular bricks (Wire cut brick) (190mm x 90 mm x 90 mm), With cement mortar (1:4) In superstructure, ground floor including scafolding/staging
27	Rendering the Surface of walls and ceiling with White Cement base Water Proof wall putty of approved make & brand.(1.5 mm thick)
28	Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Make: SAL (LOCAL)
29	Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100mm. X 75mm. X 3.50mm.
30	Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.300mm long.
31	Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:With round base:150 mm grip x 12 mm dia rod.
32	Applying One Coat Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface, ,including scaffolding/staging where necessary
33	Protective and Decorative Acrylic exterior emulsion paint of approved quality(Two Coat)Super Protective 100% Acrylic Emulsion including scaffolding/staging where necessary
34	Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface ,One Coat ,Water based interior grade Acrylic Primer ,including scaffolding/staging where necessary
35	Applying Acrylic Emulsion Paint of approved make and brand on walls and ceilingii) Luxury Quality,including scaffolding/staging where necessary (Two coats)
36	Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering,, scaffolding/staging where necessary
37	Painting with best quality synthetic enamel paint of approved make and brandOn Steel or other metal surface : Two Coat ,including scaffolding/staging where necessary
38	Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
39	Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On timber or plastered surface : With super gloss (hi-gloss) –Two coats (with any shade except white)
40	On steel or other metal surface : With other than hi-gloss of approved quality- Two coats (with any shade except white)
41	Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete.
42	Supplying, fitting & fixing true to line and level digitalelevation Ceramic tiles of approved brand conforming to IS:15622:2006 Group B III and tested as per IS:13630:2006 as ornamental cladding on external wall in natural stone, brick, wood, bamboo pattern/ design fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all completeincluding scaffolding/staging if required
43	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.Area of each tile above 0.09 Sq.m Coloured decorative for Wall
44	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.Area of each tile above 0.09 Sq.m Coloured decorative for floor
45	18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]The rate includes cost of material, labour, scaffolding/staging and all incidental chargescost of labour for grinding Kota Stone Floor in treads and riser of Steps
46	Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone.
47	Supplying fitting and fixing in position 8 mm. to 12 mm. thick Dholpur slab in wall, dado making suitable arrangement to hold the stone properly with approved polymerised adhesives (6 mm thick) as per ISI specification including pointing with cement mortar (1:2) (1 cement: 2 marble dust) with admixture of pigment matching the stone shades all completeincluding cost of all materials, labour, scaffolding, staging, curing complete [using white cement for pointing @ 2.4 kg/ Sq.m]
48	Supplying, fitting and fixing Marble Slab of 15 to 18 mm thicknessover 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing{White cement and Pigment to be supplied by the Agency] including cost of all materials, labour, scaffolding, stagingWith Chawk Dungri
49	Supplying, fitting & fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize designThe glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved
50	Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, consisting of floor and ceiling channel 50/51 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and thestuds 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to them studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture‟s specificationall complete 66 to 67 mm overall thickness partition using 8 mm thick High pressure steam cured non-Asbestos multipurpose Cement Board reinforced with cellulose fibre(Density>1250kg/m3) manufactured through autoclaving process as per IS: 14862 with suitable fibre cement screws.
51	6 mm thick Designer Multipurpose Cement board (High Pressure steam cured, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7&8, density > 1450kg/m3, Bond strength 15 N/sqmm fire resistant, termite proof, moisture resistant) reinforced with cellulose fibre manufactured through autoclaving process as per IS : 14862 & ISO 8336, with fibre cement screws in partition as per drawings
52	Supplying, fitting & fixing of partly glazed partly panelled or fully glazedsingle leaf Aluminium swing door of all aluminium sections viz doorframe ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws, handle,door stopper. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings ,10-12 Micron thickness Annodizing film colour powder coating
53	Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings . 10-12 Micron thickness Annodizing film colour powder coating
54	Supplying bubble free float glass ( clear)of approved make and brandconforming to IS: 2835-1987; 6mm thick
55	Godrej Hydraulic door closer fitted and fixed complete Heavy type
56	Supplying \"Godrej\" mortice lock chromium plated with keys 6 levers including fitting & fixing complete
57	M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel, rail section conforming to IS: 226, IS: 808 & SP (6)- 1964,hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998),tabular sections conforming to IS: 806-1968 & IS: 1161- 1998 connected to one another with bracket, gussets, cleats as per design,complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.
58	Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand(Payment will be made on finished length of the work).
59	Supplying , fabrication fitting & fixing 202 grade Stainless Steel goldas approved by EIC,individual 2 inch raising coupal letter ( back side acrylic/ Front S.S letter ) letter inside halo led fitting including modul Led, SMPS,fitting material wire etc. as per requirement.Matter either in english or hindi or both along with Logo as approved by EIC 1) 1.5 W -LED Module samsung make ( 1 year warranty) 2) 400w rainproof outdoor SMPS ( 1 year warranty ) 3) 304 grade Stainless Steel4) 1.5 & .75 sqmm wire – ( Havells /Finolex)Note: Measurement is taken on the basis of area of each letter (either in square or rectangular)
60	Supplying , fabrication fitting & fixing 202 grade acrylic goldas approved by EIC,individual 2 inch raising coupal letter ( back side / frontacrylic letter ) letter inside halo led fitting including modul Led, SMPS,fitting material wire etc. as per requirement.Matter either in english or hindi or both along with Logo as approved by EIC 1) 1.5 W -LED Module samsung make ( 1 year warranty) 2) 400w rainproof outdoor SMPS ( 1 year warranty )3) 1.5 & .75 sqmm wire – ( Havells /Finolex)Note: Measurement is taken on the basis of area of each letter (either in square or rectangular)
61	ACP wrapping: 3.5mm exterior grade designer alluminium composite panel as approved by EIC (Alu Decor/Interia/Pratap Bond)1.5mm aluminium section with micron quality powder coating. 38 X 25 almnm tube.38 X 25mm joining angles.12 x 12mm joining angles.50 x 50mm MS bracket.MS & SS anchor bolt.MS Fastnut.SS screws.Weather coat silicone sealant.
62	Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre tocentre, horizontal & vertical tubes joining with cup & lock system with M.S.tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval.The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.Note: -Necessary deduction for scaffolding in the existing item if included to be done.
63	Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails,bends,tees, trapsas required including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:110 mm. Dia
64	Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails,bends,tees, trapsas required including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:75 mm. Dia
65	Supplying, fitting and fixing CPVC 25 mm (ChlorinatedPolyvinyl Chloride) pipes of approved makeconformingto IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials
66	Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).(Make-JJ)
67	Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint
68	Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
69	Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model - Florentine of Jaquar or similar brand)
70	Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
71	Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
72	Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth)with 250 mm thick 1st. class brick work in cement mortar (1 :4) on all sides, bottom of the pitconsisting of 100 mm thick cement concrete (1 :3:6) with stone chips over a layer of jhama brickflat soJing,15 mm thick (1 :4) cement plaster to inside walls and out-side walls upto G.L. and 20mm.thick (1 :4) plaster to bottom of the pit, providing necessary invert with cement concrete(1:3:6) with stone chips as per direction, neat cement finishing to entire internal surtaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 rnm thick cement plaster (1 :4) in all externa/surfaces of the slab and one 560 mm dia. R.C.C. manhole Cover of approved make supplied fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
73	Supplying, fitting and fiXing yard gully with approved H.C.I. grating complete. 225 mm X 150 mm with 230 mm gratings
74	Supplying, fitting and fiXing with cement jointing (3: 1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides). 150mm Dia.
75	Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings.Colour:White
76	Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. Sink only 530 mm X 430 mm x 180 mm
77	Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality)(a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
78	Supplying, fitting and fixing 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand).
79	Supplying, fitting and fixing pillar cock of approved make.CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -Tropical / Sumthing Special of ESSCO or similar brand).
80	Providing and laying water proofing treatment in sunken portion of WCs,bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
81	Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, For Exposed WorkCPVC Pipes Class-1, SDR-11 specials 32 mm dia.
82	Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, For Exposed WorkCPVC Pipes Class-1, SDR-11 specials . 40 mm dia.
83	Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, For Concealed WorkCPVC Pipes Class-1, SDR-1115 mm dia.
84	Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, For Concealed WorkCPVC Pipes Class-1, SDR-1120 mm dia.
85	Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).40 mm dia
86	Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).32 mm dia
87	Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).25 mm dia
88	Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With \"P\" trap
89	Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity withmid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 4 mm thick High Pressure Steam Cured NonAsbestos pearl designer Fibre Cement Standard Ceiling Board (Density > 1500 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type A Category IV of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per thedrawing In ground floor.a) False Ceiling (with 4mm thick Pearl Designer Fibre Cement Board and E-GridT-2430/1510).
90	M.S.or W.I. Ornamental grill of approved design jointscontinuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugsGrill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr The weight of grill per sq.m. will be determined by taking the physical weight of fabricated grill and dividing the same by covered area of the same.
91	Supplying, fitting and fixing Fan Hook for ceiling with apropriate length long 16mm. dia rod complete including mending damages. Payment for damage and repair to be made separately.
92	40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with water proofing compound of approved brand @ 0.2% weight of cement including cost of materials over two coats of non toxic acrylic polymer modified cementitious waterproofing slurry coat complete [cost of water proofing compound and non toxic paint to be paid seperately).
93	Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.35mm thick.
94	Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment . The rate includes the cost of labour, adhesive and all incidental charges thereof.In ground floorGlossy/Matt/Suede excluding surface texture or metallic lustre. (Thickness 1.00 mm)
95	Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) 40mm X 6mm, 250mm Length
96	Supplying, fitting and fixing Latches for the door with locking arrangement
97	Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987. xiv) 12mm thick coloured / tinted / toughened glass coforming to IS:2553-1992 (Part-II)
98	Supply & Fixing of 0.9mm Deck sheets-240 Mpa minimum yield stresscold rolled steel with mimimum 100 mm end laps wherever required and galvanisation thickness of 120GSM
99	Supply & Fixing of 0.8mm GI trapezoidal decking from approved manufacturer all complete as per directed by client/Consultant. the rate should inclusive of providing necessary edge sheeting. Necessary shop drawings to be submitted and to got approval before procurement and installation. Only the laid area will be measured and paid. No overlap will be considered for payment.
100	Providing and fixing pre punched shear stud SD1 type confirming to ISO 13918 & ISO/TR 15608
101	Supplying best Indian Reinforced wire safety glass 10 mm thick including cutting to required sizes, setting on putty bases and fitted and fixed with teak glazing bead (19mm x 12mm) including putty and nails as necessary complete. (for use in Flush Doors for Viewing purpose)
102	Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding/staging and all incidental charges but excluding the cost of primer. Two Coat
103	M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board includingG.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc.complete)
104	Makeing & placing in position running planter bed of 19 mm thick BWP ply of size 1\"-1\"-4\" wide including 6\"high recessed skirting with a projected band of 10\" height above it, all finished externally with 1.0mm thk.laminate(2 colours) as directed & inside with aluminium sheet lining. The top edge of the board of the planter bed to have Rubber wood lipping which will conceal the edge of the aluminium sheet, complete as per design.
105	Providing and fixing of factory made uPVC casement window(U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame, Sash, & Mullion with having wall thickness of 2.3 mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm) made from roll forming process of required length. All corners of frame and sash will be fusion welded. mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s, uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. shall be provided in all frame, sash & mullion, wherever necessary. Thereafter, 5 mm clear annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., stainless steel (SS 304 grade) friction hinges & zinc alloy (white powder coated) casement handles (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window frame shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per approved drawing (Note: Profile manufacturer & Windowanufacturer must be one & same, Only manufacturer Waranty is aceptable) Casement Window frame of size 65 x 58 mm & Sash / Mullion of size 65 x80 mm (Window Height above 1200 mm or Building height above 18 mtr )both having wall thickness of 2.3 ± 0.2 mm
106	Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost ofall materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect.150 mm dia. medium quality
107	Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost ofall materials,jointing materials ,cutting pipes,making threads,cutting trenchesupto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect.50 mm dia. medium quality
108	Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayerd) 2000 litre capacity
109	Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavationearth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from thechamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% byweight of cement with all costs of labour and materials.v) For 100 users With SAIL/TATA/RINL
110	Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and1.00m inside dia.(SAIL/TATA/RINL)
111	100 mm thick interlocking designer concrete paver block M-50 grade for hightraffic zone, bus terminus, industrial complex, mandi houses etc. as per IS: 156582006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete
112	Providing and fixing at or near ground level precast cement concrete in kerbs (size: 410 mm x 310 mm x width 150 mm at bottom with circular nosing at top) (Nano kerb) of cement concreat M25 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compactedand curing the morter joints for atleast 3 days including cost and carriage of all materials complete.
113	Hire and rental charges of cable ditector machine for searching of cable near Gateas per instruction of EIC.
114	WATERPROOF TREATMENT:Supplying and laying standard four course bituminous water proofing treatment as per specification laid down in I.S. 1346 - 1991 to be finished with pea size gravel including necessary preparatory works such as shaping mouth of outlets, cutting as and where necessary and refilling with sand and Cement mortar (4:1) or Cement Concrete (1:2:4) with graded stone chips before undertaking the treatment including cutting grooves in parapet and inserting edge of felt and mending good damage complete in all respect including cost of all materials and labours and incidental charges but excluding the cost of Cement Mortar or concrete required for levelling and grading. (In sloped roof Course sand of approved varieties is to be used in place of Pea size gravels as fourth and final course.)i) 1st and 3rd Course with bonding materials of hot applied industrial blown type bitumen of grade 85/25 or 90/15 conforming to I.S.702 - 1988 @ 12Kg/10Sqm on each layer.ii) 2nd course with Hessian base self finished bitumen type3 Gr.-I conforming to I.S. 1322-1993 (weighing 23kg/10Sqm gross with bitumen content 12.10kg/10Sqm ) tested under the provision of I.S. 13826 - 1993 part VIIiii) 4th course with washed and clean pea sized gravel or grit @ 0.006 cum/Sqm. Over Flat Roof
115	Supplying and affixing optically clear polyester sun control window film having acrylic pressure sensitive adhesive on one side & an acrylic abrasion resistant coating on the other, with composition of infrared absorbing carbon & free from any optical defect. The film characteristics should conform to ASTM E308, ASTM E903, ASTM E84 and ASHIRAE. The film should be pasted after preparatory works without any cracking, delamination, bubbling, discolouring and variation in total transmission of light across the width at any portion along the length doesn\"t exceed 2% over the average including scaffolding & relevant others to complete in all respect as per manufacturer\"s specification(Note: This work should not be executed without specific permission of Superintending Engineer) Superior Quality : Film Thickness - 2.0 Mil, Glare Reduction > 75%, U factor < 1.03, Emissivity < 0.70
116	Chromium plated double coat Hook (Equivalent to Code No. 35761 & Model - KUBIX of Jaquar or similar).
117	Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model-ALLIED of Jaquar or similar).
118	Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.300 mm long
119	Supplying, fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 750 mm long
120	Supplying, fitting and fixing C.I. round grating. 100 mm
121	Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.450 mm X 300 mm
122	Supplying, fitting and fixing glass shelf with aluminium guard rails.(a) Ordinary type with 5.5 mm sheet glass 600 mm X 125 mm
123	Supplying, fitting and fixing soap holder. PTMT(Prayag or equivalent)
124	Supplying, fitting and fixing towel rail with two brackets. C.P. over brass, 25 mm dia. and 450 mm long
125	Supply, fit & fix closet seat of approved make with lid and C.P. hinges rubber buffer and brass screw EPWC.Plastic (hallow type) white
126	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 Single Socketed 3 Meter Length 110 mm
127	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 \UPVC \"P\" trap(LH,RH),110mm.
128	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992Door Bend (LH) & (RH)110 mm
129	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings iv) Door Tee(LH) & (RH) 110 mm
130	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 UPVC vent cowl,75mm.
131	Wall panelling / partition with Melamine faced 3 layered flat pressed woodparticle board of approved make and brandof requisite grade bonded with phenol formaldehyde synthetic resinconforming to IS: 848 - 1974 (excluding the cost of supporting frame work andteak wood battens / lipping)Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 -1990.Both side decorative laminate 12mm thick
132	Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite doorframe as per approved section with glass fibre reinforced plastic moulded skinsand a special sandwich core, so as to impart monolitaheic composite structure asper approved technology of Department of Science and Technology (DST) tosafisfy IS: 4020 door testing performance criteria..66mm x 70mm
133	Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite doorshutters as per approved design with glass fibre reinforced plastic moulded skinsand a special sandwich core, so as to impart monolitaheic composite structure asper approved technology of Department of Science and Technology (DST) tosatisfy IS:4020 door testing performance criteria.In ground floor.25 mm thick
134	Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontalStrainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete . Weight of Strainless Steel railing per metre 6.5 Kg (approx)
135	Construction of 3D-Printed one storied modular office of approx plinth area 10 Sqm. The scope of work included:-a) Foundation:Design, drawing & constructionb) Concrete 3D-Printed wall: Design, supply and assembly the comcrete 3D-Printed wall.c) Roof: Design, drawing and construction.d) Finishing: (i) Supply and installation of UPVC door and window all complete. (ii) Fixing of floor tiles. (iii) Inside & outside primers & painting with acrylic paint.(iv) Supply, fitting and fixing of necessary electric wiring, sockets, switches as per approved design.Note: This work has to be monitored by the specialized agency who are expert in construction of 3D-Printed building. (The rate may be increased/decreased as per pro-rata basis with respect of increase/decrease of plinth area
136	Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification
137	Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares
138	LANDSCAPING ALONG WITH ALLIED CIVIL WORK
139	Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within Perimeter. as directed.
140	Dismantling of flexible pavements and disposal of dismantled materials within Perimeter, stackingserviceable and unserviceable materials separately as per Technical Specifications Clause 202 for Rural Roads of MORD.Bituminous Courses
141	Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stackingserviceable and unserviceable materials separately as per Technical Specifications Clause 202 for Rural Roads of MORD. Granular Courses
142	Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete,With earth obtained from excavation of foundation, trench, drain
143	Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within Perimeter.(Rates include the cost of steel scaffolding if required)
144	Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within Perimeter.(Rates include the cost of steel scaffolding if required)
145	Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within Perimeter. including stacking of steel bars upto any height (Rates include the cost of steel scaffolding if required)
146	Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect .
147	Labour for lowering and stacking after dismantling in parts R.S. joists, channels, angles, tees, plates etc.complete as directed from any height
148	Supplying, spreading and consolidating an uniform and homogeneous mixture of Stone Dust and Sand (mixed in proportion of 3 : 1 by volume ) to the required thickness in layers at 97% Proctor Density (not less than 1.7 gm/cc) with powerroller to proper gradient and camber, including watering as necessary, lighting, guarding, barricading and making adequate earthen bundh where necessary to protect the edges and curing with water for 2 to 3 days, mending cracks and depressions by rolling where necessary complete as per Specification including all incidental charges of roller, cost of fuel & lubricants.The compaction factor is 0.67.Note: Rolling should also be done before spreading of mixture of stone dust and sand
149	Brick pavement with 1st class or picked jhama bricks as directed with joints set close in cement mortar (1 :6) and rule\flush pointing with cement mortar (1 : 4) When laid with a cushion of sand below (including cost thereof),One brick flat pavement(Cement- 1.4Kg/Sq.M)
150	Brick work with 1st class bricks in cement mortar (1:4)
151	125 mm thick brick work with 1st class bricks in cement mortar (1:4) ,including scaffolding/staging where necessary
152	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.
153	M15 grade Ready Mix black pervious concrete with graded stone chips (10 mm or 20 mm nominal size),Design porosity of 15-25%,Size of pores 0.5-8 mm, excluding shuttering and reinforcement,if any, as per relevant IS codes.Make: Ultratech/ACC
154	Stamp ConcreteProviding, laying & compacting freshly mixed M25grade plain / reinforced cement concrete (blended either with Fly Ash or GGBS) along with addition of 900 gm of polypropylene (PP) fibers considering a concrete layer of an average thickness of 75 mmand as per directions of the Engineer-in-Charge.Finished slope to be provided as per relevant drawings.(Cost of reinforcement for stamped flooring is not included in this item which will be paid separately).Applying stamping finish to the top surface of freshly laid plain / reinforced cement concrete of M25 grade in porticos, sidewalks, driveways, pool decks and open yardsThe process shall include the following: -a)The concrete shall be placed and screeded to the finished grade and floated to a uniform surface by using standard finishing techniques. The approved colour hardener @ 3.0 Kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.19 Kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the whole surface to be stamped is completed within the time while concrete is in plastic stage of setting.b)After stamping, the curing shall be done as per manufacturer\"s specifications. After initial curing, the imprinted joints shall be grouted using cement slurry mixed with colour hardener as per the requirement. The surface shall be sealed by applying acrylic based sealer not less than 0.25 litre/sqm on finished surface.c)The construction joints shall be provided by groove cutting of size 4mm X 20mm in panel size of 3m X 3m or lesser as per the site conditions and filling the same with 10mm baker rod and providing and laying Polysulphide based joint sealer of approved make as per manufacturer\"s specifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface.(Brand: Ultratech/ACC)
155	Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
156	Hire and labour charges forSteel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works
157	80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices ofblocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete .Colour Decorative
158	Supplying ready mixed concrete of M 30 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work, compacting and curing the same complete as per specificationincluding computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. With approved concrete pump
159	Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders , dowel bar (dowel bar should be installed as per normal practice) etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction (Sail/Tata/RINL)
160	Supplying and laying Polythene Sheet (150gm / sq.m.)/125 micron below concrete pavement
161	M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as , labour insurance charges etc.
162	Supply, fbrication fitting & fixing of lettering made of MS plate of thickness as approved by EIC.Matter either in English/Hindi/Bengali/all along with logo.This work includes cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as , labour insurance charges etc.(Note: Measurement will be taken on the basis of area of each letter (either in square or rectangular and payment will be made on weight of that area in MT)
163	Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary,With 1:4 cement mortar,20 mm thick plaster
164	Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc
165	Supplying and laying 30 mm. thick any colourVariety chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling]
166	Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including moulding and making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all completeincluding cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of each Granite slab > 0.6 upto 1.0 square metre. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]
167	Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing. {White cement and Pigment to be supplied by the Agency] including cost of all materials, labour, scaffolding, stagingWith Chawk Dungri
168	Supplying, fitting & fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design . The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation,scaffolding/staging, material and required pattern approved
169	18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishingto match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]The rate includes cost of material, labour, scaffolding/staging and all incidental charges
170	Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone.
171	Supplying, fitting & fixing true to line and leveldigital elevation Ceramic tiles of approved brand conforming to IS:15622:2006 Group B III and tested as per IS:13630:2006 as ornamental cladding on external wall in natural stone, brick, wood, bamboo pattern/ design fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete. including scaffolding/staging if required
172	Supplying and laying true to line and level Double Charge Vitrified Tiles of any pattern as directed by EIC ofapproved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer\"s specification .size not Iess than 600mmX 600 mm X 9.5 mm thick
173	Supplying fitting and fixing in position 8 mm. to 12 mm. thick Dholpur slab in wall, dado making suitable arrangement to hold the stone properly with approved polymerised adhesives (6 mm thick) as per ISI specification including pointing with cement mortar (1:2) (1 cement: 2 marble dust) with admixture of pigment matching the stone shades all completeincluding cost of all materials, labour, scaffolding, staging, curing complete [using white cement for pointing @ 2.4 kg/ Sq.m]
174	Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etcThe rate includes cost of material, labour, scaffolding/staging and all incidental charges
175	Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary, On steel or other metal surface, With other than hi-gloss of approved quality,Two coats (with any shade except white)The rate includes cost of material, labour, scaffolding/staging and all incidental charges
176	Applying two coats of anti corrosive EPOXY paint (color as approved by EIC)of approved make and brand to sluice gates only after preparing the surface by rough sand blasting.The rate includes cost of material, labour, scaffolding/staging and all incidental charges
177	Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)The rate includes cost of material, labour, scaffolding/staging and all incidental charges
178	Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.The rate includes cost of material, labour, scaffolding/staging and all incidental charges
179	Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterioremulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction.Two CoatThe rate includes cost of material, labour, scaffolding/staging and all incidental charges
180	Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer\"s specification and as per directionto be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding/staging and all incidental charges but excluding the cost of primer. Two Coat
181	Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wireThe rate includes cost of scaffolding/staging if required.
182	Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as \"C\" clips, R.B.T clips etc.)The rate includes cost of scaffolding/staging if equired.
183	Supplying and fixing grasses tiles of grass Maxican Carpet/Selection No. 1 Healthy & fresh grasses (size 1\"x1\" or bigger) including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from wees and fit for mowing including supplying good earth . The rate includes cost of material, labour, scaffolding/staging and all incidental charges
184	Areca Palm 4 - 5 suckers of height 90 cm to 105 cm in earthen pots of size 25 cm.
185	Providing and fixing at or near ground level precast cement concrete in kerbs (size: 410 mm x 310 mm x width 150 mm at bottom with circular nosing at top) (Nano kerb) of cement concreat M25 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specificationincluding filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compactedand curing the morter joints for atleast 3 days including cost and carriage of all materials complete.
186	Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIRvalue not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application. 300mm internal dia.
187	Filler jointProviding and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6% bitumen by weight
188	Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails,bends,tees, traps as required including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:110 mm. Dia
189	Brick work with 1st class modular bricks (Wire cut brick) (190mm x 90 mm x 90 mm), With cement mortar (1:4)In superstructure, ground floor
190	Supplying & planting Plumeria alba Tree (Plumeria alba is a species of the genus Plumeria (Apocynaceae). This 2-8m evergreen shrub has narrow elongated leaves, large and strongly perfumed white flowers with a yellow center) as per direction of the Architect
191	Supplying and fixing grasses tiles of grass Maxican Carpet/Selection No. 1 Healthy & fresh grasses (size 1\"x1\" or bigger) including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from wees and fit for mowing including supplying good earth . The rate includes cost of material, labour, scaffolding/staging and all incidental charges
192	Areca Palm 4 - 5 suckers of height 90 cm to 105 cm in earthen pots of size 25 cm.
193	Bougainvillea (mix variety) of height 30cm-90cm in earthen pots of size 20cm.
194	Adenium obesum of height 90cm-60cm in earthen pots of size 25cm.
195	CONCRETE HARD STAND & PARKING SHED
196	Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within premises
197	Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within Perimeter. including stacking of steelbars
198	Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within premises.
199	Labour for lowering and stacking after dismantling in parts R.S. joists, channels, angles, tees, plates etc.complete as directed.
200	Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal/Corporation Rules for such disposal, loading into truck and cleaning the site in all respect
201	Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within unit premises
202	Earth work in excavation of foundation trenches or drains, in all sorts of soilincluding removing, spreading or stacking the spoils within unit premises as directed.
203	Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete,With earth obtained from excavation of foundation
204	Levelling and Compacting original ground (Sub Grade) by power roller of capacity 80Kn to 100 Kn including filling in depression occour during rolling to obtain the desired dry density
205	Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand
206	Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
207	Brick work with 1st class bricks in cement mortar (1:4)In superstructure, ground floor
208	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
209	Supplying, spreading and consolidating an uniform and homogeneous mixture of Stone Dust and Sand (mixed in proportion of 3 : 1 by volume ) to the required thickness in layers at 97% Proctor Density (not less than 1.7 gm/cc) with power roller to proper gradient and camber, including watering as necessary, lighting, guarding, barricading and making adequate earthen bundh where necessary to protect the edges and curing with water for 2 to 3 days, mending cracks and depressions by rolling where necessary complete as per Specification including all incidental charges of roller, cost of fuel & lubricants.The compaction factor is 0.67.Note: Rolling should also be done before spreading of mixture of stone dust and sand
210	Providing, laying, spreading and compacting stone aggregates of specific sizes including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering , including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).Grading-2 Aggregate (53 mm to 22.4 mm@ 1.21cum) Using Stone Screening Type B (11.2 [email protected] cum) and binding materialstone dust mixed with grit @0.08cum , By Manual Means
211	Supplying ready mixed concrete of M 30 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456 and as per technical specification of SOTR, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work, compacting and curing the same complete as per specificationincluding computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. ii)With approved concrete pump
212	Supplying ready mixed Steel fibre( steel fibre dosage-20 Kg/Cum) concrete of M 30 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work, compacting and curing the same complete as per specificationincluding computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. ii)With approved concrete pump
213	Providing, erecting & fixing in position steel shuttering at all locations for all shapes etc in all complete including deshuttering of the same after specified period without damaging the concrete works as directed etc.Providing and applying approved form oil on all surfaces of formwork coming in contact with concrete as per specifications and drawings
214	Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders , dowel bar (dowel bar should be installed as per normal practice) etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction (Sail/Tata/RINL)
215	Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches
216	M.S. structural works in columns, beams, . with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.
217	Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary,With 1:4 cement mortar,15 mm thick plaster
218	Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc
219	Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction
220	Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specificationto be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer
221	Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc
222	Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary, On steel or other metal surface, With other than hi-gloss of approved quality,Two coats (with any shade except white)
223	Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIRvalue not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application. 300mm internal dia.
224	Filler jointProviding and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6% bitumen by weight
225	Painting Lines, Dashes, Arrows etc on Roads in TwoCoats on New Work .Painting lines, dashes, arrows etc on roads in twocoats on new work with ready mixed road markingpaint conforming to IS:164 on bituminous surface/concrete surface,including cleaning the surface of all dirt, dust andother foreign matter, demarcation at site and trafficcontrol (Reference to MORT&H\"s specification 803).(ii) Up to 10 cm in width
226	80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices ofblocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete .Colour Decorative
227	Stamp ConcreteProviding, laying & compacting freshly mixed M25grade plain / reinforced cement concrete (blended either with Fly Ash or GGBS) along with addition of 900 gm of polypropylene (PP) fibers considering a concrete layer of an average thickness of 75 mm .Finished slope to be provided as per relevant drawings.(Cost of reinforcement for stamped flooring is not included in this item which will be paid separately).Applying stamping finish to the top surface of freshly laid plain / reinforced cement concrete ofM25 grade in porticos, sidewalks, driveways, pool decks and open yards as per direction. The process shall include the following: -a)The concrete shall be placed and screeded to the finished grade and floated to a uniform surface by using standard finishing techniques. The approved colour hardener @ 3.0 Kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.19 Kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be appliedto the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the whole surface to be stamped is completed within the time while concrete is in plastic stage of setting.b)After stamping, the curing shall be done as per manufacturer\"s specifications. After initial curing, the imprinted joints shall be grouted using cement slurry mixed with colour hardener as per the requirement. The surface shall be sealed by applying acrylic based sealer not less than 0.25 litre/sqm on finished surface.c)The construction joints shall be provided by groove cutting of size 4mm X 20mm in panel size of 3m X 3m or lesser as per the site conditions and filling the same with 10mm baker rod and providing and laying Polysulphide based joint sealer of approved make as per manufacturer\"s specifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface.(Brand: Ultratech/ACC)
228	M15 grade Ready Mix black pervious concrete with graded stone chips (10 mm or 20 mm nominal size),Design porosity of 15-25%,Size of pores 0.5-8 mm, excluding shuttering and reinforcement,if any, as per relevant IS codes.Make: Ultratech/ACC
229	Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within Perimeter as directed.
230	Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately).(c) Large plant of girth of exposed stem above 150 mm. but not exceeding 225 mm. lift upto 6 mtr.
231	Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised \"C\" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc.(The rate is exclusive of the cost of posts) 75 mm. x 75 mm. x 6 g
232	MS (IS-2062) Holding down bolt (duly hot dip galvanised) with 100 x 100 x 6 mm plate washer at bottom, MS Insert Plates and packing the hole with cement concrete or cement grout as directed.16 mm dia bolt,300 mm long
233	Supplying , fitting and fixing single skin color coated trapezoidal profile for wall cladding, Roof shall be made of 0.45mm BMT (Base Metal Thickness) 0.50mm TCT ( Total Coated Thickness excluding paint), G550 ( minimum 550 yield strength), of Zincalume metallic coating (IS15965) with high Solar ReflectanceIndex (SRI) value for better cooling as per thermatch technology, 1000-1015mm effective cover width with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove & return leg. The steel sheet shall be fastened with 40 micron zinc coated or 25 micron zinc-tin alloy coated, hex- head, self-drilling screw as per IS 3566-2002 class 3 fastener. The base steel shall be coated with zinc-aluminum alloy Zincalume (AZ150)(i.e,55% Al, 43.4% Zinc, 1.6% Si) minimum of 150g/m2 coating total on both sides, pre-painted with colorbond XRW (exterior roofing, walling) paint system of 35 micron super Durable Polyester paint (SDP) with stable inorganic pigment with no lead contents confirming IS15965. The sheet shall be free from defects and have brand marking of the manufacturer giving product details on the back of the sheet at regular interval confirming genuinity of the material. In Roof, Ridge, valley and Wall with 0.50 mm thick sheet )( 60% payment will be released on recive of the Zn-Al alloy sheet inside the GRSE premises along with sbsequent clearance from engaging dept.)
234	Supplying, fitting & fixing 4 mm thickCorrugation Polycarbonate clear transperent sandwished sheet made of national brand, excluding the supporting frame work, fitted and fixed with 10mm dia x 55mm Self-driving screws, Weather lock washers and putty complete with 150mm end lap and one corrugation minimum side lap complete as per specificationincluding materials, labour, taxes and all other incidental charges ( 60% payment will be released on recive of the Polycarbonate sheet inside the GRSE premises along with sbsequent clearance from engaging dept.)
235	M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawingcomplete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground.
236	Supplying. preparing and placement of ready mix non shrink cementious microconcrete having no metalic aggregate or chlorides for repairing and jackting of damagedR.C.C.members. Themicro concrete should achieve a compressive strength not less than 10 MPaafter 24 hours. 40 Mpaafter 7 days and 50Mpa aftre 28 days at 300C.It should have unrestrained expansion in between 1 to 4%. flexural strength shall not be less than 5MPaafter 28 days. Micro concrete should have a co-efficient of thermal expansion similar to that of the host concrete.
237	Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer\"s specification for water proofing layer in water tank etc. (No Departmental Cement is required)
238	Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed
239	80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices ofblocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete .Colour Decorative
240	100 mm thick interlocking designer concrete paver block M-50 grade for hightraffic zone, bus terminus, industrial complex, mandi houses etc. as per IS: 15658- 2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the intersticesof blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete .Colour Decorative
241	Prime CoatProvidingandapplyingprimercoat withCationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications forRoad&BridgeWorksofMoRT&H (5th Revision).( for WBM/WMM Surface)(with Primer @0.7-1.0 kg/sqm)
242	Bituminous Macadam using Mobile Hot Mix Plant(Light Duty)Providing and laying bituminous macadam with Mobile Hot Mix Plant (Light Duty) using approved crushed aggregates of specified grading as per Table 500.4 premixed with bituminous binder, transported to site laid over a previously prepared surface at specified laying temperature by means of approved and suitable arrangements to the required grade, level and alignment and rolledwithsuitable power roller for break down, inter-mediate and finished rolling as per specification to achieve the desired compaction including cost and carriage of stone materials and bitumen,hirechargesofmachineryandequipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per Specifications for Road & Bridge Works of MoRT&H (5th Revision).B. For Grading II 19 mm nominal size, 50-75 mm thick.)
243	Tack CoatProviding and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS:8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage ofemulsion, hire charges ofmachinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
244	Open-Graded Premix Surfacing using Bituminous (Viscosity grade Paving Bitumen / Modified bitumen) Binder and Mobile Hot Mix Plant (Light Duty)Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²)size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by tipper trucks or by any other suitable arrangements, laying the mixture uniformly over the surface with paver finisher, including manual operations as and when required for proper line, grade and level to serve as wearing course on a previously prepared base, including mixing in Hot Mix Plant and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished torequired level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Hot Mix Plant and other machinery, pay of operators, cost of fuel and lubricants etc. complete as per Clause 510ofSpecificationsforRoad&BridgeWorksof MoRT&H (5th Revision). Using Mobile HMP (Light Duty)
245	Premixed Seal Coat (Type B)Providing andlayingPremixed SealCoat(TypeB) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coatedwithtackcoat,includingheating andmixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rateusing suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, costoffuel and lubricants, including hire charges of machineries, tools &plantsrequired forconstruction and quality control complete as per Clause 511 of SpecificationsforRoad&BridgeWorksofMoRT&H (5th Revision).IIBy Manual Means With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.)
246	25 mm Thick Mastic AsphaltSupplying & Laying a single layer, 25 mm thick Mastic Asphalt Wearing Course in road pavement/bridge decks using approved coarse aggregate, fine aggregate, filler material and bitumen, including cost and carriage of all ingredients, cost of heating aggregates and binder, mixing in specified proportions conforming to approved Job Mix Formula, laying the mix, compacting, sealing the construction joints and surface finishing conforming to specifications, construction procedure and quality control vide Section 515 of Specifications of Road & Bridge Works (4th Revision) published by IRC, including the hire charge of all tool, plants & machineries, pay of operators, cost of fuel and lubricants and all other incidental charges and quality control complete.
247	Supply and fixing the Aluminium Automatic Railway Boom Barrier at level crossing, heavy duty performance, high quality, weather & Corrosion registance high visibility, reliable & low maintenance upto 6 m which include moto & all accessories (Magnetic loop detector, fixed support/mobile support, key selector,photocells, flashing light, three station push button etc) and complete work for operation.
248	C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting,manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete, 200 mm
249	Supply fitting and fixing of Stainless Steel Single Headed Hydrant Valve, 63mm (2 ½ inch) Female instantaneous Coupling, Oblique type, with Gun Metal Blank cap. ISImarked: as per IS: 5290 Coupling size: 63mm Female single outlet type #A# (Flow: 900 LPM at 7kg/cm2).O.D. 200 mm. I.D. 75 mm. Valve body, Bonnet, Stop Valve, Check Nut and Instantaneous Female Outlet is to be made of Stainless Steel Grade 1 of 4 of IS: 3444 Valve Spindle is to be made of SS confirming to IS: 6603.Hand Wheel is to be made of MS confirming to IS: 1030. Washers, Gaskets are to be made of Rubber confirming to IS: 937. Spring is to be made of SS Wire confirming to IS: 6528. Flange is of 4 holes on 160 mm PCD.
250	ELECTRICAL WORK
251	Design, Manufacture, Inspection, Supply, Installation, Testing, Commissioning including Civil Work and handing over satisfactorily working condition of 1no Passenger elevator (6 passenger/ 420 Kg)with Lift Panel, Load Test, Lift Car, Wire Rope, Inverter including the cost of providing Maintenance andDLP for 3 years after handing over. (Floor G+1, 2 Stops/ 2 Landing)
252	Supplying & installation of electric motor with Drive and electrical control, accessaries & wheels for MS. Sliding gate.
253	Supplying, Installation, testing & Commissioning 12-15 Watt LED Down Light (SMD Type) including connection etc as required
254	Supplying, Installation, testing & Commissioning 08-10 Watt LED Down Light (SMD Type) including connection etc as required
255	Supplying, Installation, testing & Commissioning 06 Watt LED Down Light (SMD Type) including connection etc as required
256	Supplying, Installation, testing & Commissioning 06 Watt Waterproof LED Outdoor Spotlight with Standincluding connection etc as required (IP65)
257	Supplying, Installation, testing & Commissioning 06 Watt Waterproof LED Outdoor Spotlight with Standincluding connection etc as required (IP65)
258	Supplying, Installation, testing & Commissioningof LED 22 Watt Panel Light 2 x 2 ft of following body material & constractionas per IS 10322
259	Supplying, Installation, testing & Commissioningof 4ft 36 Watt LED Surface Mounted Batten Light as per IS 10322
260	Supplying, Installation, testing & Commissioningof 200 Watt Flood Light, Power CoatedPressure die cust aluminium bodu with built in driver. (IP-66)
261	Supplying, Installation, testing & Commissioningof 100 Watt Flood Light, Power CoatedPressure die cust aluminium bodu with built in driver. (IP-66)
262	Supplying, Installation, testing & Commissioningof 50 Watt Street Light, Power CoatedPressure die cust aluminium bodu with built in driver. (IP-66)
263	Supplying, Installation, testing & Commissioning of 1200mm Celling Fan with Stepped type Modular Fan regulator (2 module)
264	Supplying, Installation, testing & Commissioning of 300mm Exhaust Fan
265	Supplying and fixing following modular 15/16 A socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
266	Supplying and fixing following modular 15/16 A switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
267	Supplying and fixing following modular 5/6 A socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
268	Supplying and fixing following modular 5/6 A switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
269	Supplying and fixing following modular Bell Push switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
270	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable
271	Wiring for AC/ Geyser/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required.
272	Supplying and fixing of 20mm sizes medium class PVC conduit, with bends, couplers, screws, Two Way JB etc. as required.
273	Supplying and fixing of 20mm sizes of steel conduit along withaccessories in surface/recess including painting in case of surfaceconduit, or cutting the wall and making good the same in case ofrecessed conduit as required.
274	Supplying, Installation, Modular GI box for 2 module with Modular base & cover plate
275	Supplying, Installation, Modular GI box for 3 module with Modular base & cover plate
276	Supplying, Installation, Modular GI box for 4 module with Modular base & cover plate
277	Supplying, Installation, Modular GI box for 6 module with Modular base & cover plate
278	Supplying, Installation, Modular GI box for 8 module with Modular base & cover plate
279	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of SP MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.
280	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of DP MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.
281	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of TP MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.
282	Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
283	Supplying and fixing 63 A rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
284	Supplying and fixing 100 A rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
285	Supplying and fixing 200 A rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
286	Supplying and fixing Cable End Box (Loose Wire Box) suitable for 8way, Double Door single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
287	Supplying and fixing Cable End Box (Loose Wire Box) suitable for 8 Way triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
288	Supplying, Installation on wall, Testing and Commissioning of 200 A (Isc=15 kA for 1 second) capacity rising mains made of 1.6mm thick IP 42 sheet steel enclosure duly painted with powder coating, wall straps, fully PVC insulated 4 Nos aluminium bus bars having current density of 130 A/ sq.cm at nominal current rating in convenient sections and suitable for 415 V, 3 phase, 4 wire, 50 Hz, A.C. supply with extension joints, fire proof barriers, expansion joints, thrust pads including jointing and earthing with 2 runs of galvanised iron strips etc. as required. (Rising mains confirming to IS 8623, TEC 439).
289	Supplying, Laying, Connection 4 Core X 95 Sq.mm Aluminium XLPE/ frls 1.1KV Armoured Cable with Gland
290	Supplying, Laying, Connection 4 Core X 150 Sq.mm Aluminium XLPE/ frls 1.1KV Armoured Cable with Gland
291	Supply & Installation of 1.5 Ton Split Inverter Air Conditioners, Refrigerant R32 with Fixing & Conecting indoor & outdoor unit with Copper Pipes & Installing of drainage pipes aloso Supply & Installation of Power Plug & MCB
292	Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required.
293	Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick

Also Visit

Tenders

West Bengal Tenders

Services Tenders

Space Planning and Designing Tenders

Landscape Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of New Entrance Gate Along With Security Office Building Including Concrete Hardstand With Parking Shed And Landscaping At Foj Unit, Grse Kolkata, Kolkata-West Bengal

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of New Entrance Gate Along With Security Office Building Including Concrete Hardstand With Parking Shed And Landscaping At Foj Unit, Grse Kolkata, Kolkata-West Bengal

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us