|
| 1 | Supply at the work site of 07 (seven) mtr. long swaged & welded steel tubular pole of designation 410 SP3 with base plate, pole cap etc. complete. Respective lengths of bottom, middle & top portions are 4.00 mtr. (114.30 x 5.40) mm, 1.50 mtr.(88.90 x 4.85)mm, & 1.50 mtr (76.10 x 3.25) mm. Make: India Poles Corporation / Subham Poles Projects Pvt. Ltd. / J. K. Industries / Subham Power Products (P) Ltd. (Analysed rate). Ref. Rajbandh Sisu Sadan. |
| 2 | Erection of Single Steel tubular pole of length as given below with/without sole plate & cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal / stone chips including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store /Place shown by department to work-site including filling up the excavated earth pit with shifted soil and ramming properly. Upto 9 mtr. (0.60 x 0.60 x 1.70) mtr. PWDSR Nov. 2017, Pg. H1, Item 1, a) + 3% district charge. |
| 3 | Supply at the work site of 2C x 10 sq.mm Al. conductor, XLPE insulated, armoured, overall PVC sheathed, 1.1 KV grade power cable conforming to IS: 7098(Part-1) 1988 with latest amendments. Make : Polycab / Finolex / KEI / Havells. Analysed Rate with 2.5% transportation, KEI LP w.e.f. 09.10.2024. |
| 4 | Laying of cable in underground trench 460 mm wide x 760 mm average depth,with brick protection on the top of the cable with 8 (eight) Nos. brick per meter,including filling the space between the brick & cable and also the trench with shifted soil, levelling up and restore the surface duly rammed. (PWD, Page F-2, Item 1.a + 3% District Charge. |
| 5 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. PWDSR Nov 2017, Pg. F1, 2a + 3% District Charge. |
| 6 | Laying only Cable upto 50 sq.mm through existing RCC/Hume/ GI Pipe/open masonry trench for single, 2, 3, 3½ & 4 core. (Item No.3.a of Pg. F1 of PWD (Elect.) SR w.e.f.Nov.2017 + 3% district charge. |
| 7 | Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing materials as required. 50 mm dia.. PWDSR Nov. 2017, Pg. F6, Item 11d + District Charge @ 3%. |
| 8 | Supply at the work site of IP 66 flood lighting luminaire with 4 KV in built surge protection device and PDC housing. Lumen output is 24K, nominal wattage is 200 W, suitable for 220-240V, 50 Hz AC supply & nominal system efficacy is 120 lm / watt. . Make: Philips (BVP 283 LED 240 CW FG SY5NB / SY5WB 200W V1, as found suitable for area lighting, as per direction & satisfaction of the EIC) / appvd. equivalent from Crompton / Bajaj / Wipro. |
| 9 | Fixing only floodlight fitting with suitable tie clams and MS plate for mounting on pole / tower or similar structure. PWD SR, Nov. 2017, C3, 20a + 3% District Charge. |
| 10 | Supply & fixing on pole with all necessary connections & items of outdoor type dust & vermin proof 3-ph pole box (300mm x 200mm x 125mm) made out of 2mm thick CRCA sheet painted with powder coated paint through seven tank process having 4 nos. terminal suitable for termination of 3nos. 4cx16/25sq. mm Al. armoured cable with glanding arrangements, earth bolt, earthing terminal and 6A SP MCB of Legrand. Rate obtained through quotations, rate vetted by KMDA, Lenin Sarani. |
| 11 | Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250V, 15A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting. 200 x 150 x100 mm. PWDSR Nov.2017,Pg.I2,Item-16a + District Charges @3% |
| 12 | Supply at the work site of 1100 volt grade 1.5 sq. mm HRFR PVC insulated unsheathed single core industrial grade flexible copper cable conforming to IS: 694. (Ph., N & E) from pole box to light fitting as per direction of EIC. Finolex/KEI/ Polycab/Havells. (Analysed Rate, Ref. Havells LP 02.01.2018), rate vetted by KMDA, Lenin Sarani. |
| 13 | Drawal of 1100 volt grade 1.5 sq. mm FR PVC insulated single core stranded copper wire conforming to IS: 694:1990 (Ph., N & E) from pole box to light fittings as per direction of EIC. Rate obtained through quotations, rate vetted by KMDA, Lenin Sarani. |
| 14 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint.One coat of red lead/Zinc chromate priming. upto 9 mtr. long pole. PWDSR Nov 2017, Pg. H2, 7Aai + 3% District Charge. |
| 15 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. 1st coat of aluminium paint over 1 coat of RO priming. upto 9 mtr. long pole. PWDSR Nov 2017, Pg. H2, 4ai + 3% District Charge. |
| 16 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. 2nd coat of aluminium paint over 1st coat. upto 9 mtr. long pole. PWDSR Nov 2017, Pg. H2, 4ai + 3% District Charge. |
| 17 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe. PWDSR Nov. 2017, Pg. G1, Item 2 + District Charge @ 3%. |
| 18 | Excavation of soil for installation of Earth Electrode and filling and ramming. For soft soil. PWDSR Nov. 2017, Pg. G1, Item 1a + District Charge @ 3%. |
| 19 | Excavation of soil for installation of Earth Electrode and filling and ramming. For morrum soil. PWDSR Nov. 2017, Pg. G1, Item 1b + District Charge @ 3%. |
| 20 | Extra for treatment of soil by using salt & charcoal or coke for electrode. PWDSR Nov. 2017, Pg. G2, Item 3b + District Charge @ 3%. |
| 21 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE / PVC armoured cables as below: For 2core 10 sq.mm.F4,7a + 3% district charge. |
| 22 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials: For 2C x 10 sq.mm. F5, 8b + 3% district charge. |
| 23 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. Legrand 6-32A SP. D6, 7 + 3% District Charge. |
| 24 | G S T As applicable @ 18% on total work done value ( SL NO. - 1 to 23 ) |
| 25 | Labour Welfare Cess @ 1% on total work done value including G S T ( SL NO. - 1 to24) Please Enable Macros to View BoQ information |
