|
| 1 | Taking down chowkats or frames with shutter (without taking off shutters from the frame) n exc 1.50 Sqm each incl removing to store complete all as specified and directed. |
| 2 | Ditto All as per item No 1 above but exc 1.50 qm and n exc 4.0 Sqm each incl removing to store. |
| 3 | Taking down shutters of any description n exc 1.0 Sqm each incl removing to store complete all as specified and directed. |
| 4 | Ditto All as per item No 3 above but xc 1.0 Sqm but n exc 2.0 Sqm each incl removing to store. |
| 5 | Taking down shutter of any description n exc 1.0 Sqm each and refixing with same opening complete all as specified and directed. |
| 6 | Taking down shutter of any description exc 1.0 Sqmbut n exc 2.0 Sqm each and refixing with same opening complete all as specified and directed. |
| 7 | Resecuring or easing and adjusting without taking down shutters of any description exc 1.0 Sqm and n exc 2.0 Sqm and complete all as specified and directed. |
| 8 | S & F 2nd class HW plain solid straight chowkats and frames,wrought, framed rebated on the solid rounded or chamfered put together with glue pinned joints complete all as specified and directed. |
| 9 | S & F of Glazed and skeleton shutters of 2nd class hardwood with thickness of batten 35 mm, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 10 | All as per item No 9 here in before but with sash bars for window and ventilators etc are provided styles and rails specified in SSR Pt I,Sec 8,Clause 8.24 (b) of size 30 mm thick shutter complete all as specified and directed. |
| 11 | S & F for Plain, framed, panelled shutters of 2nd class hardwood with thickness of batten 40 mm (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed. |
| 12 | S & F of Flush shutters of thickness 30mm, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 13 | M & L two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces incl preparation of new wooden surfaces complete all as specified and directed. |
| 14 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 15 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.(Make : Duroplast/RAJSHREE) |
| 16 | S & F of factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/ Chowkat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/Cum,screw withdrawl strength of 2200 N (Face) & 1100 N (Edge), minimum comressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (Note : MS hold fast/lugs/SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account ahall be made. (Make : Duroplast / RAJSHREE). |
| 17 | S & F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawl strength of 1800 N (Face) & 900 N (Edge), minimum comressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note: Stainless steel butt hunges and necessary S.S screws shall be paid for separately).(Make : Duroplast / RAJSHREE). |
| 18 | M&L 15 mm thick cement plaster in CM (1:6) on fair faces of brick work incl finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | S & F 200 mm long aluminium anodised barrel tower bolt of extrued section as in repairs complete all as specified and directed. |
| 20 | Ditto All as per item No-19 above but 150 mm long |
| 21 | M&L 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed. |
| 22 | S&F 150 mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. |
| 23 | S&F 125mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 24 | S & F 300 mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clip of shut cast or extruded section and fixing bolts and sliding bolts of extruded section as cast aluminium alloy complete all as specified and directed. |
| 25 | S&F mild steel sliding door bolts, plate type, stove enamellled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of length of bolt of 250 mm complete all as specified and directed. |
| 26 | S & F 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C- 21 complete all as specified and directed. |
| 27 | S & F 75 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C- 21 complete all as specified and directed. |
| 28 | S & F 100 mm long butt hinges MS medium weight cold rolled complete all as specified and directed. |
| 29 | S & F 125 mm long butt hinges S/S medium weight cold rolled complete all as specified and directed. |
| 30 | S & F 150 mm extruded aluminium alloy handle fabricated type anodised complete all as specified and directed. |
| 31 | Ditto All as per item No-32 above but 125 mm long |
| 32 | S&F 125 mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. |
| 33 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed. |
| 34 | S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed. |
| 35 | S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed. |
| 36 | M & L 5mm thick frosted sheet glass panes quality with Aluminium and rubber gasket complete all as specified and directed. |
| 37 | S&F 5mm sheet glass tinted quality and glazing with aluminium frame and rubber gasket complete all as specified and directed. |
| 38 | S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with stainless steel wire stapples complete all as specified and directed. |
| 39 | M & L in repairfor plain fillets of 2nd class hardwood square, rectangular or triangular in section, clean sawn, secured with nails or brads having sectinal area n. exc 3 SqcmCompletely all as specified and directed. |
| 40 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with stainless steel wire stapples complete all as specified and directed. |
| 41 | S&F in repair steel window with side hung shutter in proper position incl projecting type hinges with steel handle and steel peg stey complete with glazing bars dove telled or welded and finishing the disturbed surfaces complete all as specified and directed. |
| 42 | Ditto All as per above item No 41 but top hung shutter |
| 43 | M & L for greasing of existing steel window & door (of any type/size) and making suitable for easy opening/closing of shutters including cutting of jambs/ cills etc and making good the disturbed surfaces complete all as specified and directed. |
| 44 | S&F in repair aluminium anodised tubular curtain rod 20 mm dia complete all as specified and directed. |
| 45 | S&F aluminium anodised Brackets for tubular curtain rod complete all as specified and directed. |
| 46 | M&L New or previously untreated steel surfaces of any description, over 10cm in width or grith, not otherwise described apply two coats of synthetic enamel paint over red oxide complete all as specified and directed. |
| 47 | Taking down aluminium door, window and partition (of any type/ size) and refixing the same including necessary repairs such as straighting of edges, bringing at a level with required cutting adjusting of any depression/ projection to the same opening complete all as specified and directed. |
| 48 | Supply and fix in repair anodised powder coat aluminium frame for window with one or more rebates, anodised aluminium window, sliding type shutters, sliding on two way aluminium channel, without sash bars, sliding on separate track, made out of aluminium section weighing 0.55 Kg/RM and necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, fittings such as suitable anodised aluminium locking type handle etc and fixing of 4.00 mm thick tinted glass (make atul/ St Govain) including aluminium gill complete all as specified and directed. (Make - Jindal /Hindalco) |
| 49 | S&F in repair powder coat aluminium anodized door frame/ Aluminium Partition wall made out of aluminium section 65 x38 mm with anodized aluminium push/pull glazed type shutters with lock rail 80 x45 mm for stile 80 x 45 mm for top rail and 115 x 45 mm for bottom rail and necessary jointing clears glazing clips, rubber packing, anodized aluminium snap beading, screws lock, including supply and fixing 5.5 mm thick tinted glass, lock etc complete fitting complete all as specified and directed. |
| 50 | S & F Anodised aluminium grill (anodised transperent or dyed to required shede according to IS: 1868 with minimum anodic coating of grade AC15) to approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 51 | M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.(ISI Marked) complete all as specified and directed. |
| 52 | M & L in repair 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed. |
| 53 | S & L in repair 30mm thick 2nd class hardwood, clean sawn board on planks, width n exc. 20cm complete all as specified and directed. |
| 54 | S & F in repair 18mm thick Plywood, grade BWR, type BB, termite proof fixed with screws to timber frame work as in shelves complete all as specified and directed. |
| 55 | Prelaminated particle board, exterior grade, prelaminated both sides with decorative choiceamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 56 | Welding in repairsexc 2.5cmbut n exc 5cm in length, thickness of metal to be welded Exc 6mm but n.exc 9mm complete all as specified and directed. |
| 57 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
