|
| 1 | B&R PORTION:Taking up or down steel tubing and connections of 15mm bore dia of pipe including cleaning for refixing or removal from site complete all as specified and directed. |
| 2 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified and directed. |
| 3 | S&F 20 mm dia Brass Elbow complete all as specified and directed. |
| 4 | S&F 20 mm dia Brass Tee complete all as specified and directed. |
| 5 | Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off the shutter from the frame) complete all as specified and directed. |
| 6 | Taking down chowkatsor frames exc 1.5 sq. m but n exc 4 sq. m (without taking off shutters from the frame) complete all as specified and directed. |
| 7 | S&F factory made uPVC any colour (as finalized by Engr-in-charge) Three track jointless three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 + 0.2mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 + 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy white powder coated) touch locks with hook, zinc alloy body with single nylon rollers weight bearing capacity to be 40 kg), G.I fasteners 100 x 8mm size for fixing frame to finished wall and incl provn of guard bars of 10 mm square MS bar as safety grill, necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, incl all required hardware fitments complete all as specified and directed by Engineer-in-Charge. Rate of Glass or wiremesh shall not be paid separately rate is included in the quoted rate and no seperate payment will be given for glass and wiremesh) (Rate of 10mm square MS bar will be included in the quoted rate and no seperate payment will be given for guard bar) Make: Rajshri / Fenesta / EcocellNote: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 8 | S&F in repair sinks with drainage board made of SS-304 stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size( 950mmx510mm) and bowl size (460mmx410mmx250mm) complete all as specified and directed.Make: Nirali Cat Part No SKS054 or equivalent of make as specified in PS or ISI Marked |
| 9 | S&F in repair 15mm bore dia chromium plated finish quarter turn fancy type central hole Sink basin mixer long round spout with popup Waste assemly with 10mm dia have high pressure resistant and leak free, legs to connect and 450 mm long copper braided hose/pipes having provision for hot and cold water supply complete all as specified and directed. Make : Johnson- Coral CAT Part No T1417CAMZ or Equivelant in Jaquar, kohler,cera |
| 10 | S&F in repair angle valve (one way) 15 mm bore cast copper alloy fancy type, cromium plated with cup complete all as specified and directed.Make: Jaquar CAT Part No OPP-CHR-15053PM , Cera Cat Part No F2002201 or Equivelant in kohler |
| 11 | S&F in repairs CP grating 100 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as specified and directed. |
| 12 | S&F in repair Stainless steel plate rack made of stainless steel 1mm thick 900mmx 600mmx250mm complete all as specified and directed. |
| 13 | Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 14 | M&L for brick work with subclass \"B\" bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4. complete all as specified and directed. |
| 15 | Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 16 | M&L for Granite (of any type) work, 16-18 mm thick Z black machine cut,(table rubbed and polished) in bases for cooking platforms, lift wall, skirtings and window cillswhere ever required and fix on cement mortar bedding of 20mm thick in cement mortar 1:6 including pointing in white cement using marble dust with admixture of pigment to match same colour including rounded edges with shade of granite, incl drilling holes for pipes etc n exc 25mm dia in cooking platform hole in granite, complete all as specified and directed by Engr in charge.Notes: (a) Additional 75mm-100mm width patti shall be measured separately.(b) Minimum rate of granite should not be less than Rs. 1500/- per Sqm including GST. |
| 17 | M&L for 16-18 mm thick granite (of any type) Z black machine cut,(table rubbed and polished) as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing laid overand including 15 mm thick rendering in CM 1:4complete all as specified and directed by Engr in charge. |
| 18 | Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles from site complete all as specified and directed. |
| 19 | M&L for Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:4 (Size, Colour and pattern of tile as approved by EIC) complete all as specified and directed by Engr in charge.Make :- Somany or equivalent in Kajaria/Johnson etc. |
| 20 | M&L for joint free super gloss/high gloss coloured tiles in vertical surface of size 600mmx300mm 8-10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including rendering of 10 mm thick in CM 1:3 on wallincluding highlighter tiles of same size as required (Size,Colour and pattern approved by EIC) complete all as specified and directed.Make :- Somany or equivalent in Kajaria/Johnson etc |
| 21 | Demolition cement concrete (reinforced) in ground floors of any description and in any position as in kitchen slabs/shelves/old chimney etc complete all as specified and directed. |
| 22 | M&L for Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone agg as in slab supported on walls, beams & columns in floors, roofs complete all as specified and directed. |
| 23 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping complete all as specified and directed. |
| 24 | Form work to edges of concrete flats RCC/PCC and exc 5 cm but not exc 15cm complete all as specified and directed. |
| 25 | M&L for TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia complete all as specified and directed. |
| 26 | All as per item No 25.00 above but 6mm to 8mm dia complete all as specified and directed. |
| 27 | Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc complete all as specified and directed. |
| 28 | M&L for 15 mm thick rendering plaster on fair or other than faces of brick work or concrete surfaces in cement mortar 1:6 and finishing surfaces even and smooth without using extra cement complete all as specified and directed by Engr in charge. |
| 29 | M&L for Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50mm thick Birla putty complete all as specified and directed. |
| 30 | S&F GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stachions, beams etc incl all laps cutting and waste complete all as specified and directed. |
| 31 | M&L for 10 mm thick cement plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement (SBR latex shall be measured and paid separately) complete all as specified and directed. |
| 32 | Supply only Styrene Butadiene Rubberlatex emulsion complete all as specified and directed. |
| 33 | M&L for Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00mm thick Birla putty complete all as specified and directed. |
| 34 | M&L for complete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.50mm thick Birla putty complete all as specified and directed. |
| 35 | M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of oil bound distemper using roller brush over a coat of primer and over incl one coat of Birla putty complete all as specified and directed by EIC. |
| 36 | S&F in repairs Exhaust fan louvers 230/300 mm size, of aluminium including taking out old louvers up to fourth floor and fixed properly inside wall complete all as specified and directed.Note :- Staircase arrangement for fixing louvers up to fourth floor will be made by contractor |
| 37 | Removing kitchen demolished materials / old waste unwanted existing material of any description or any type etc on alternate day to a distance of 5 km out side MOD landpremises. (note -Lorry/truck having capacity above 3 cum). complete all as specified and as directed by EIC. |
| 38 | S&F HDHMR Cup Board made of 18 mm thick with upto 1 mm thick Prelam of glossy/Matt finish (incl prelam make - Greenlam, Merino or equivalent of approved brand) for hold of shelf / partition/back /kitchen top shelf and shall provide 3 edges in sizes as per required length.theedgesof shelf / partition / wall side to be lipped with 18 mm with upto 1 mm thick Prelam and HDHMR sheet of density 750 Kg /cbm manufactured by as ISO -9000 certified company, using solvent cement fixed with screws to timber frame work etc (including all necessary SS304 hardware fitting i.e fixing with soft closing hydraulic hinges, SS handles, ball catchers including locking arrangement in Cup boardincluding dismantling of old sheet complete in all respect as specified and directed.Note- edge bending should be done(measurement should be taken external face only i.e. length and breadth and depth upto 0.45m and payment for hydraulic hinges done separately) complete all as specified and directed.Make: Rajshree,Century,Giza or equivalent of approved make |
| 39 | S&F stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make - Hettich/Haffele or equivalent in others to cupboard shutters of kitchen cabinets with full threaded steel screws including making necessary recess in board and finished etc complete as per direction of Engineer-in-charge complete all as specified and directed. |
| 40 | S&F Kitchen cabinets made out of HDHMR sheet board 18mm thick with upto 1 mm thick Prelam of glossy/Matt finish(incl prelam make - Greenlam,Merino or equivalent of approved brand) including making drawers, partitions, shelves and WPC board on all sides with following specifications and as directed by Engineer-in-charge:-(a) 18 mm thick HDHMR solid flush board with upto 1 mm thick pre-laminated sheet of glossy/Matt finish fixed on one side, as front face/shutter of kitchen cabinet and inner side of white colour of HDHMR sheet of density 750 Kg /cbm manufactured by as ISO -9000 certified company.(Make- Rajshree,Century, Giza or equivalent of approved make) (b) Frame of size 50mmx47mm. (c) Shutters having soft closing hydraulic hingesmake - Hettich/Haffele and ss304 handle 75mm long 01 No for each shutter. (Note- only payment of hydraulic hinges shall be paid seperately in each nos) (d) Bottom, back and sides of cabinet covered with 18 mm thick hdhmr board with 1 mm thick pre-laminated of glossy/Matt finish sheet fixed on one side.(e) Drawers having ss304 handle 75mm long and two long sliding rails for each drawers with magnetic catcher as required. (f) Each Cabinet must have one drawers supported of sliding rails and having locking arrangement in one.(g) Size of each cabinet shall not be exceeding 0.9 M x 0.75 M and0.60 M depth.(h) Measurement will be considered only for front face i.e. length & height & depth 0.60m.(j) SS304 jali baskets mounted on each drawer having ss telescopic channelincl all baskets i.e. pullout,wire,corner,plate,plain,bottle,cutlery basket of approved make(6 no of basket in one kitchen)(k) edge bending should be done .Note: Measurement for purpose of payment shall be made on external visible face for width x height (considering frame). |
| 41 | Surface excavation not exc 30cm deep and averaging 15cm deep and and getting out in hard or dence soil complete all as specified and directed. |
| 42 | Excavating in post holes in Hard/dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 43 | M&L for providing and laying at or near ground level factory made kerb stone of M25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete all as specified and directed. |
| 44 | M&L for one coat of synthetic enamel paint in any approved pattern and colour including preparation of new surface of kerb stone/ concrete/ plaster surface exc 10cm width or girth not otherwise provided complete all as specified and directed. |
| 45 | M&L for PCC 1:3:6type C2 Cement concrete in foundations, filling and mass concrete complete all as specified and directed. |
| 46 | Removing excavated material of hard /dense soil exc. 1.50 km but n exc. 5 km and depositing out side the MOD land complete all as specified and directed. |
| 47 | M&L for Hard core of broken stones or boulders of gauge not exe 63mm, deposited spread, levelled in layers n exc 15 cm thick incl watering and rolling with power roller 8 to 12 Ton complete all as specified and directed by Engr-in-charge. |
| 48 | M&L for Cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in sub base, 75mm thick, finished fair and even without using extra cement, complete all as specified and directed. |
| 49 | M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in coping, band, bed plates and similar items including weathering slightly rounded or chamfered angles and througting, complete all as specified and directed. |
| 50 | M&L for Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified and directed. |
| 51 | M&L for Machine pressed precast concrete interlocking coloured paver block with ceramic/glossy finish any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed By Engr-in-charge. |
| 52 | S&F MS works for fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 53 | M&L for Mild Steel round bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for securing and supporting of of wiremesh confirming to Gd.I, IS-432 or Fe-290 (Gde-E-165) complete all as specified and directed. |
| 54 | Fixing only chain link MS galvanised fencing of any size with GI wire including line wires any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. |
| 55 | Supply only galvanisedchain link fencing 3.40 mm dia & 100x100 meshincluding line wireswtn. exc 4.00 Kg/Sqm complete all as specified and directed. |
| 56 | S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed other, fitted with washer and one hexagonal or square n exc 5cm long and 10mm dia complete all as specified and directed. |
| 57 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;door in fencing ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 for portionsframedandhungas gates,includingpintlehinges, stops,hand-made sliding bolts, etc complete all as specified and directed. |
| 58 | M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide complete all as specified and directed. |
| 59 | M&L for preparationof new or previously untreated surfaces of steel of any description, n exc 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 60 | Supply and plantaion of grass selection No 1(A1 quality grass) by dibbling root method complete all as specified and directed.Note :-(1) The following activities/work to be carried at site for plantation of grass selection No 1-(a) Levelling the existing dense/hard soil averaging 10cm level after loosening and filling soft loose soil 20mm thickness on entire park area sufficient to grow up A1 quality grass. (b) Ploughing of whole site in soft /loose/ordinary soil upto the depth of 20 cm and removing all the unwanted material such as stone, weeds tree root etc which are not suitable for healthy growth of grass.(c) Dressing and leveling the soil to a required gradient and slope on completion of work mentioned in Note (a) and (b) above after loosening the soil.(d) Mixing of fertilizer and manure evenly by manually as under and as directed.Manure :- (i) Old cow dung or Okhla sludge at a rate of 2.25 cutz c foot for 10 Sqm.Fertilisers :-(i) Neem kholi at the rate of 2 kg for 10 Sqm(ii) Benemeal at the rate of 1 kg for 10 Sqm(iii) D.A (16.42) at the rate of 0.15 kg for 10 Sqm(iv) BHC dust 10% or lindance dust at the rate of 0.15 kg for 10 Sqm(e) Fine dressing a top soil after mixing the manure and fertilizer to required slope.(f) Watering the area for fine dressing of soil after one week till the soil get water upto.(g) Fine dressing of surfaces of top soil to require slop and gradient towards the manholes.(h) Plantation of grass @ 10 Cm do both way by dibbling root method(2) Rates include supply and transportation of manure, Fertilizers, sweet, earth,soft soil filling, ATT Chemical & sand complete all as specified and directed. |
| 61 | Maintenance of all plants, shrubs, Hedges, grass etc for a period of 06 month after date of completion by employing 3 (three) skilled Gardener per day to ensure healing up keep,of watering plant, pour manure, carryout periodic tilling and use pesticides, cutting grass and removing unwanted grass & plants at work site complete all as specified and directed.Note :-(i) During the period any plant, shrubs, grass etc is found dead, not true to name or size as specified or not in satisfactory growth plat of approved size & shape shall be replaced by the contractor.(ii) If contractor fail to comply above points the work will be carried out through other agency and amount will be recovered from the earnest money and 10% of reserved money (10% of contract amount will be kept for guarantee period.(iii) Supply & application of manure, sweet earth sand, ATT Chemical & pesticides etc, Fertilisers etc are included in the quoted unit rate during Maintence period. |
| 62 | E&M PORTION:Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed by Engr in charge. |
| 63 | M&L for point wiringwith PVC insulated unsheathedmulti strandedFRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked andits accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 5 Amp switch complete all as specified and directed.Note: (i)Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate.(ii)No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required.(iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion. |
| 64 | All as per item No 63.00 above but One three pinsocket outlet 6 amps point controlled by one no, one way switch on independent board complete all as specified and directed. |
| 65 | All as per item No 63.00 above but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed. |
| 66 | S&F in repair modular Switch 6 amps, 230 vots, single pole, one way (ISI marked) with IP 20 rating complete all as specified and directed.Make : Havells Cat part No-ACNSXX101, Legrand Cat Part No-573400, Indoasian Cat part No-810600 |
| 67 | S&F in repair 16 Amp rating modular switch one way one module with IP 20 rating complete all as specified and directed.Make : Havells Cat part No-ACNSXX161, Legrand Cat Part No-573410, Indoasian Cat part No-810601 |
| 68 | S&F in repair modular socket out let 230 volts grade (as catered in point wiring above)6 Amp - 2/3 pin combined 2 modulecomplete all as specified and directed.Make : Havells Cat part No-ACAKPXW063, Legrand Cat Part No-573470, Indoasian Cat part No-810620 |
| 69 | S&F in repair modular socket out let 230 volts grade (as catered in point wiring above)16 Amp - 2/3 pin combined 2 module complete all as specified and directed.Make : Havells Cat part No-ACAKPXW163, Legrand Cat Part No-573471, Indoasian Cat part No-810621 |
| 70 | S&F in repair ceiling rose 3 terminal / PVC insulated body ISI Marked complete all as specified and directed. |
| 71 | S&F in repair submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 4 sqmm completedrawn in new PVC concealed conduitand its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi strandedFRLSH type cable for continuous earth wire and duly connected to common earth dolly including PVC concealed conduit 20 mm dia medium grade ISI marked andits accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets all as specified and directed.Make : RR KABEL/Polycab/Havells |
| 72 | S&F in repair LED Tube Light of 16-20 Watt 230Volt (approx size 4 ft), box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size having min P.F >0.95, minimum efficacy-120 lumen/watt, IP 20 rating complete all as specified and directed.Make : Bajaj cat Part No BAJAJ BCLAB 20W CW LED XT, Crompton cat Part No CCS-100-20-65-HL2-OP-NWH, Phillips Cat Part No BN308C LED20S-6500 L120 PSU WH. |
| 73 | S&F in repair Metal body Exhaust Fan 300 mm Sweep, 230 Volt, AC 50 HZincluding louvers.The rate includes making proper arrangement for fixing i.e. cutting bricks/stone boulders of appropriate size and finishing the surface with cement work and matching paint finishes complete all as specified and directed.Make : Havells Cat Part No FHVVEMTBRN12/Crompton Cat part No DE-022/ Usha Cat Part No 151022661Note : Old unsv exhaust fan to be deposited at store yard of AGE E/M New Delhi for further disposal.Note: (a) Srl Item No 07.00 to 10.00, 12.00, 16.00, 17.00, 19.00, 20.00, 25.00, 35.00, 38.00, 40.00, 43.00, 45.00, 47.00, 48.00, 50.00 to 52.00, 55.00, 57.00, 71.00 & 73.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. |
