|
| 1 | B&R PORTION:Dismantling brick tiles or terracing tiles single layer on roof laid, bedded and pointed in any mortar incl removing the unserviceable material out side the MOD land complete all as specified and directed. |
| 2 | M&L for Treatment of roof with reinforced elastomeric liquid waterproofing membrane of 400micron thickness having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371, respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat yp!e 1200C as per IS: 101 (P-7/Sec-3) 1990 having VOC less than as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 3.5 bars of pressure for 7-days.lt should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along with water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25—40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P-8/Sec-6) 1993 and also should pass Impact test as per IS: 101 (P5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc., with pressure washer after repairing the existing roof having old bitumen membrane by filling cracks, potholes, holes with waterproofing compound having compressive strength as per IS-4031 part-6-1988 & permeability of water as per IS2645-2003.Note :- (a) Repairs of existing roof where required for said treatment shall also inclusive under unit rate. The work shall be got done through manufacturers authorised applicators only under the close supervision of their technical staff. Make: Ms STP Ltd/ Ms Torchtar Membrane & Bitumen Products Pvt Ltd/ Ms IWL India Ltd/ Ms Asian Paints Ltd |
| 3 | (a) M&L clean the surface, remove dust dirt, loose particles and unsound substrate and providing 20 mm thick cement screed (1:4) mixed with Dr Fixit or equivalent tonic liquid 200 gram/Bag over Dr Fixit or equivalent as approved by GE.(b) Applying primer coat with solvent based Bitumen primer @ 0.5 ltr/sqm(c )Dr Fixit or equivalent as approved by GEtorch shield water proofing 3mm thick membrane use gas burner to heat substrate, press firmly from lower end to upper and with 100 mm overlap(d) Heat both over lap with round tipped trowel to seal over lap . Excess compound smoothened, pressed into seam using hot trowel(e) Seal edges well into grooves & protect with a poly sulphide sealant.(f)M&L hydraulically pressed burnt clay tiles plain size 300X300X19 mm laid over and including 15mm thick screed in CM 1:4 with WPC & pointed in CM 1:3 mixed with crude oil complete all as specified and directed.Note: (a) WPC as per manufacturer\"s instruction shall be deemed to be included in unit rate quoted. (b) Uploading of material shall be carried out by mechanical means, use of staircase is strically probihited(c) Water proofing treatment shall be carried out through approved manufacturer\"s applicator |
| 4 | M&L for GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and complete all as specified and directed by Engineer-in-charge.Make : - Diamond Ceilings/Armstrong/Knauf Ceiling/Durlum |
| 5 | Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 6 | M&L for Glazed ceramic coloured walls tiles 450x300mm, 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed. |
| 7 | M&L for Non skid ceramic floortiles 7 to 8 mm thick (square/rectangular) coloured,area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:4, 15 mm thick for laying floor finishes complete all as specified and directed by Engr in charge. |
| 8 | S&F factory made solid panel PVC door shutters 30 mm thick (style) consisiting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel mhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,Panelling of plain colour PVC sheetto be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joinedtogether with solvent cement, supplying& fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 9 | S&F factory made solid PVCdoor frameof size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 10 | Dismantling wrought or mild steel work of any description not otherwise provide for in any height upto two strey incl necessary scaffolding where required complete all as specified and directed. |
| 11 | S&F Steel work in tubular trusses confirming to Fe 410-W Gde 250 A including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 complete all as specified and directed. |
| 12 | M&L for two coats of synthetic enamel painton new steel and iron surfaces over a coat of red oxide primer incl preparation of surfaces over 10 cm width of girth complete all as specified and directed. |
| 13 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet with approved profile and 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F in repair stainless steel sink with drain board withC.I. brackets, duly painted white 40mm C.P. waste,C.P. brass chain and rubber plug, 40mm C.P cast bottle trap withconnection pipe to wall andC.P. wall flange, rubberadapterfor waste connection complete including cuttingandmaking goodthe walls wherever required 1065x510x200mm complete all as specified and directed. |
| 15 | Taking down plastering on brick or stone walls, etc. incl racking out joints, hacking for key, scrubing down with water, etc.in cement or cement lime plaster, any description complete all as specified and directed. |
| 16 | M&L for 15 mm thick ready mix plaster (Make Ultratech) on brick or concrete surfaces of wall in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge |
| 17 | M&L for 5mm thick Ready mix plaster (Make : Ultratech) on concrete surfaces onceiling finished even and smooth complete all as specified and as directed by Engr-in-Charge |
| 18 | M&L for preparation of new wall surfaces and applying 1.5 mm thickJK / Birla wall putty as per manufactures instructions, surfaces to be finished even and smooth over a coat of alkali resisstane primer and applying two coats of exterior emulsion first quality (APPEX ASIAN/ Weather coat (BERGER)/ Weather shield (ICI) or equivelent (as approved) of approved colour complete all as specified and directed by Enge in charge. |
| 19 | M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1.5mm thick birla wall care putty complete all as specified and as directed by Engr-in-Charge |
| 20 | S&F in repair 15mm bore ofmedium grade galvanised steel tubing with all fittings and fixed complete to wall complete all as specified and directed. |
| 21 | S&F in repair wash hand basin vitreous china white, counter basinof size 540X480 mm includingmaking good the surface/joints with white cement complete all as specified and directed by Enge-in-Charge. Make: CERA CAT Part No: 1009 or equivalent of make as specified in PS. |
| 22 | S&F in repair urinal vitreous china including waste coupling and fixingacessaries of size 375x315x620mm complete all as specified and directed by Engr in charge.Make: JAQUARCAT PART No URSWHT-132530 or equivelent in CERA, HINDWARE |
| 23 | S&F in repairs snow white vitreous china EWC single peice type 700X370X645 mm incl seat cover and flush fittingscompletefixed in floor with brass screw complete all as specified and directed.Make : JAQUAR CAT Part No: SLSWHT-6851Por equivelent in Parryware, Johnson Pedder |
| 24 | S&F in repair vitreous chine wash down water closet pedestal pattern white complete and connection to flushing cistern and fixed in floor with brass screwcomplete all as specified and directed. |
| 25 | S&F in repair 15mm bore chromium plated single lever wash hand basin piller cock quarter turn complete all as specified and directed.Make: Jaguar Cat Part No OPR-15001PM of JAQUAR or equivelent of make as specified in PS. |
| 26 | S&F in repair CP Health Faucet (Hand Operated) with lever controlled and 1 meter Flexible Tube connection with C.P. Wall Hook complete in all respectscomplete all as specified and directed. |
| 27 | S&F in repair 6mm thick bevelededge mirror with teak wood beading (Mirror ofapproved quality and as per specifications)with6mmthick asbestos plain sheet ground fixed with C.P. brass screws and washers etc of size 700 x 500 mm complete all as specified and directed.. |
| 28 | S&F in repair C.P. Brass toilet paper holder, including cutting and making good the walls wherever required complete all as specified and directed. |
| 29 | S&F in repair PVC connections 15 mm X 600 mm with PTMT nuts complete all as specified and directed. |
| 30 | S&F in repair 15 mm bore chromium plated fancy type brass angular stop cock with wall flanged screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.Make : JAGUAR CAT Part No OPP-CHR-15053PM or equivelent of make as specified in PS. |
| 31 | S&F in repair 15 mm bore brass chromium plated TWO way bib taps withknob to operate, complete all as specified and directed.Make : JAGUAR CAT Part No: VGP-CHR- 81041 or equivelent of make as specified in PS. |
| 32 | S&F in repair urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60gms) complete all as specified and directed. |
| 33 | S&F vitreous china urinal partition white of size 310 X 700 mm complete all as specified and directed. |
| 34 | S&F in repair towel rail 600 mm longPTMT fixed with and incl CP brass screws and wooden /plastic cleatscomplete all as specified and directed. |
| 35 | S&F in repair 125 mm dia CP grating openable type with hinge as per sample over nahani/floor trap including embedding the same in white/coloured cement to match complete all as specified and directed |
| 36 | S&F in repair brass chromium plated tubular towel rails 20 mm diaD type ,60 cm long between flanges complete all as specified and directed. |
| 37 | S&F Aluminium alloy, anodised, sliding door bolt 300MM with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 38 | S&F 300MM Aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 39 | S&F aluminium handle of150mm size cast type anodised (ISI marked) complete all as specified and directed. |
| 40 | S&F in repair chromium plated brass bib tap fancy type screwed down , screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed. |
| 41 | Dismantling water tanks of capacity not exceeding upto 500 litres complete all as specified and directed. |
| 42 | S&F 500 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed. |
| 43 | S&F butt hinges 100 long medium weight cold rolled SS with SS hinges pins finished bright and smooth complete all as specified and directed by Engr in charge. |
| 44 | Dismantling wall, ceiling boards and pre fabricatio boards incl frame of any description as in panelling ceiling, partition, cub boards etc incl cover fillets in any surfaces complete all as specified and directed. |
| 45 | S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasters incl moulding at columns, windows and doors jambs complete all as specified and directed. Note:-(a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff.(b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only. |
| 46 | M&L for providing and fixing False ceiling at any height with semi perforated 12mm thick mircro tegular edge GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.85 (with 50mm thick glass wool) as per IS 8225 :1987, Noncombustile as per BS 476 (part-4) -1970 and light reflectance of 75-85% to be laid in true horizontal level or in slope as per site requirement suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides) Comprising of main - T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondry intermediate cross T of size 15x32m of length 600mm to from grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod up to 1000nn length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partion with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wass SS screws. The work shall be carried out as per specificatons, drawing and as per direction of Engineer-in-Charge complete all as specified and directed. |
| 47 | M&L for Vitrified Ceramic tiles in light shade (square/ rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 48 | S&F welded steel wire fabric fixed complete to steel member n.exc 4 Kg per Sqm including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 49 | Taking down chowkhats or frame without taking off shutters n. exc 1.50 sqm complete all as specified and directed. |
| 50 | Taking down chowkhats or frame without taking off shuttersexc 1.50 sqm but n.exc 4.0 sqm complete all as specified and directed. |
| 51 | S&F powder coated aluminium window incl frame using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter , 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, butt hinges SS 100 mm 04 Nos etc complete all a specified and directed by Engr-in-Charge |
| 52 | S&F powder coatedaluminum door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/Harrison) 02 Nos tower bolt 150 mm , door handles, SS butt hinges 125 mm 04 Nos, hydraulic door closer and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size complete all as specified and directed by Engr in charge.Make of glass (MODI/FLOAT/ATUL). |
| 53 | S&F aluminium ornamantal grill 8mm dia 75x95mm aperture complete incl U channel complete all as specified and directed. |
| 54 | S&F ZEBRAvenetian blinds horizontal type incl guide rail, pulling thread etc incl taking down existing pelmets complete all as specified and directed by Engr in charge. |
| 55 | Dismantling boarding any descriptin , fixed in any position with screws complete all as specified and directed. |
| 56 | S&F powder coated aluminium partition n.exc 1.20 Sqm in each panel using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/5.50 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board (Make: GLASS Make MODI/ FLOAT/ ATUL) complete all as specified and directed. |
| 57 | S&F 18mm thick MDF board pre laminated both side fixed with aluminium screws as in storage cabinet/cub board /work station incl all fittings fixtures and builder hardware/telescopic channel 18 inch , cup board lock (godrage)etc and the edges shall be covered with PVC banding tape, working station etc complete all as specified and directed.Make Kitply/M/s Green Ply |
| 58 | S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with anle clits or other connecting plates confirming to Fe 410 -W (Gde E-250) quality - A complete all as specified and directed. |
| 59 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, or sub floors foundations, filling and mass concrete complete all as specified and directed. |
| 60 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 61 | M&L for Brick work with sub-class `B\" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 62 | Supply only water proofing compound liquid complete all as specified and directed. |
| 63 | S&F powder coated aluminum frame/guiding rail for sliding or side hung window/ventilators and for sliding shutters with one or more rebates incl jointing cleats for fixing etc and 5.5 mm thick sheet glass of ordinary quality exc 0.5 sqm but n exc 1 sqm incl grinding of edges complete all as specified and directed. |
| 64 | S&F mineral fibre ceiling boards 16 mm thick 600 X 600 mm size incl grid 25 X 25 X 1.6 mm thick GI powder coated angles 25 X 35 X 1.6 mm size ‘T’ section fixed with suspenders from ceiling etc (Armstrong RH Dune 99, Aerolite) complete all as specified and directed. |
| 65 | Excavation in post holes n. exc 0.5 cum in each hole and getting out in soft/loose soil complete all as specified and directed. |
| 66 | Surface dressing n exc. 15cm deep getting out in soft and loose soil complete all as specified and directed. |
| 67 | Removing excavated material n. Exc. 50m and depositing where directd at a level n.exc. 1.5m above ther starting point complete all as specified and directed. |
| 68 | M&L for Cement Concrete Type C2, 1:3:6, 40 mm graded aggregate for fixing of MS fencing posts complete all as specified and directed. |
| 69 | S&F PVC coated Mild steel angles, flats, etc (PVC Coated not less than .7 mm thick) as in supports for posts, struts, in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets, (for securing wire mesh) including all necessary drilling, bolting and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed. |
| 70 | S&F PVC coated mild steel round bars, 10 mm dia (PVC coating not less than .70 mm thick) as in straining bars confirming to Gde-I IS-432 , cut to length , bent to shape rerquired and fixing complete all as specified and directed. |
| 71 | Supply only PVC coated GI chain link mesh of size 50 x 50 mm,3.6 mm dia GI wire with 1 mm thick PVC coating, weight exc 4.5 Kg /Sqm, complete all as specified and directed. |
| 72 | Fixing only chain link fencing etc complete all as specified and directed. |
| 73 | S&F rolled mild steel framed work as in doors or gates of angles or other sections conforming to FE 290 gde E-165with gusset plates, rails braces, Hinges, Sliding bolts etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing to steel frames, including all necessary welding, complete all as specified and directed. |
| 74 | M&L for Preparation of new untreated steel surfaces of any description n exc. 10 cm width or girth when unconnected with other painting or connected with different unit ,not otherwise described and applying two caots of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed. |
| 75 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured seperately) complete all as specified and directed. |
| 76 | Excavation in trenches and getting out soft/loose soil not exc 1.5 mwide and not exc 1.5 m in depth for foundation etc for shaft wells cosspits, manholes, etc not xc 1.5 m in depth and getting out complete all as specified and directed. |
| 77 | Removing excavated materialexceeding 1.5Km and depositing out of defence landwhere directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 78 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 79 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 80 | S&F Aluminium strips for roof sheeting ties over sheets at any description as directedfixing with self tapping screws etc complete all as specified and directed. |
| 81 | S&F 10mm thick polycoarbonatesheetof and colour having tensile as per manufacture instructions as in roof covering/cladding to wall fixed with self tapping screws as specified or as per manufacture instruction complete all as specified and directed. |
| 82 | Demolition of cement concrete unreinforced in ground floors pavings nexc 15 cm thickness below or above ground levels complete all as specified and directed. |
| 83 | M&L for 75 mm thick cement concrete Type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed. |
| 84 | M&L for Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified and directed. |
| 85 | M&L for Machine pressed precast concrete interlocking paver block with ceramic/glossy finish any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed. |
| 86 | M&L for chequered PU glossy finishes coloured cement concrete tiles size 30cm x 30cm x 25 mm thick set ,jointed and pointed in colour cement and pigment and fixed with cement slurry in floors including 20 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed. |
| 87 | M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in coping, band, bed plates and similar items including weathering slightly rounded or chamfered angles and througting, complete all as specified and directed. |
| 88 | S&F 3mm thick pre coated Alluminium Composite Panel cladding sheet of approved colour and shape, joint filled with silicon sealant, fixed as per manufacturers instruction complete all as specified and directed. |
| 89 | S&F standard anodised aluminium section for frame work for fixing ACP sheet cladding complete all as specified and directed. |
| 90 | S&F stainless steel letters of font Arial or any other font as approved user in size 50cmx30cmx25cm thick made with 2mm thick stainless steel sheet matt finish with acrylic letter female part fitted into SS letters back incl backlift LED feature for illuminating letter fixed on composit panel faced wall with approved stainless steel screws and bolts for the letters in English/Hindi & including connection existing light board complete all as specified and directed by Engr in charge. |
| 91 | M&L for 20mm thick Granite (of any type and colour) work (table rubbed and polished) in jambs, pillars,wall and like in vertical surface in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 92 | Removing building materialsto a distance up to 5 KM under, beyond the lead incl in the rates incl loading, unloading and stacking at the destination complete all as specified and directed by EIC |
| 93 | E&M PORTION:Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed by Engr in charge. |
| 94 | M&L for point wiringwith PVC insulated unsheathedmulti strandedFRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked andits accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 5 Amp switch complete all as specified and directed.Note: (i)Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate.(ii)No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required.(iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion. |
| 95 | All as per item No 94.00 above but for One bell/buzzer point controlled by one bell push complete all as specified and directed. |
| 96 | All as per item No 94.00 above but for One 3 pin 5 Amp socket outlet on the same board complete all as specified and directed. |
| 97 | All as per item No 94.00 above but for One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board complete all as specified and directed. |
| 98 | All as per item No 94.00 above butwith 2 x 2.5 Sqmm +1 x 2.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board complete all as specified and directed. |
| 99 | S&F in repair modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed.Make: Anchor/legrand/havells/CG/C&S/Indo asian/Gold Medal/ Panasonic/Schneider/Seimens |
| 100 | S&F in repair modular bell push 6 amps complete all as specified and directed.Make: Anchor/legrand/havells/CG/C&S/Indo asian/Gold Medal/ Panasonic/Schneider/Seimens |
| 101 | S&F in repair modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and directed.Make: Anchor/legrand/havells/CG/C&S/Indo asian/ Gold Medal/ Panasonic/ Schneider/ Seimens |
| 102 | S&F in repair modularswitch, 16 Amp flush type 1 module complete all as specified and directed.Make-Anchor/legrand/havells/CG/C&S/Indo asian/Gold medal/Panasonic/Schneider/Seimens |
| 103 | S&F in repair modularsocket outlet, 2/3 pin, 6/16 Amp flush type 2 module complete all as specified and directed.Make-Anchor/legrand/havells/CG/C&S/Indo asian/Gold medal/Panasonic/Schneider/Seimens |
| 104 | S&F in repair Ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and directed.Make-Anchor/legrand/havells/CG/C&S/Indo asian |
| 105 | S&F in repair sub main wiring withtwo run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt,and one run of copper earth wire 4 Sq mm drawn through PVC Casing Caping and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition),complete all as specified and directed.Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.Make - Finolex,Polycab,RR Kabel,Gloster,Havells,KEI,V Guard,RPG |
| 106 | S&F in replacement of aesthetically designed muziris decorative warm white LED picture light/mirror light of 07W CCT-3000K fixture with bronze finish for supperior feel including suitable LED lamp of 07W having LED lamp base completet all as specified and directed.Make: Phillips/bajaj/crompton/Orient/Wipro/Jaquar/Havells |
| 107 | S&F in replacement LEDlight with high output diffuser 2 feet, 10 watts, 220 volts AC decorative type complete with driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engr in charge.Make: Havells/phillips/bajaj/crompton/Orient/Wipro/Jaquar |
| 108 | S&F in replacement LED luminaire Recess/Surfacemounted downlighte (Round/Square) with pressure die cast alluminium heat sink & PC diffuser round shape 15 /18 watts warm white/cool white, 220 volts AC,Cut out dia 6 inch finished in white white powder coatedcomplete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified and directed.Make: Havells/phillips/baja/crompton/Orient/Wipro/Jaquar |
| 109 | S&F Hygieacare High-Speed Hand dryer stainless steel Automatic Sensor 1800W Hand Dryer machine single phase 230/240V complete all as specified and directed. |
| 110 | S & F in replacement PVC body ventilation fan 250mm Sweep, 240 Volt, AC 50 HZ ,plastic body including louvers with and including cutting bricks/stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement morter complete all as specified and directed by Engineer in charge. Make-Usha-CrispAir, Bajaj Maxima Neo 250, Havells Ventilair DX |
| 111 | S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 8 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB,DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed. |
| 112 | S&F in replacement of MCB SP 6-32 Amp, 10kA complete all as specified and directed. |
| 113 | S&F in repair MCB DP 32 Amps, C series, 230 Volts complete all as specified and directed. |
| 114 | S&F in repair electric bellAC 230 Volt complete all as specified and directed by Engr in charge. |
| 115 | S&F in replacement of moduler Mini MCB SP 16-20 Amp,240V 3kA, C Curve, fitted in main switch board including 2.5 sqmm wire connecting socket & modular MCB complete all as specified and directed.Make: Havells Cat Part No DHFNCSPA016, LK(L&T) Cat Part No CB93101KW16, Schneider Cat Part No P8016-N |
| 116 | S&F in repair modular AC BOX with 16-20 Amp mini MCB 230 Volts AC complete all as specified and directed. |
| 117 | S&F in repair sub main wiring withtwo run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt,and one run of copper earth wire 6.0 Sq mm drawn through PVC Casing Caping and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required (as per the existing condition),complete all as specified and directed.Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. Make- Polycab, Havells , RR Kabel |
| 118 | S&F in replacement factory made sheet steel distribution boards, double door, SPN 12 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.Make- Legrand, LK(L&T), Schneider |
| 119 | S&F in replacement MCB, SPN 32 Amp, 240V 10KA, B or C curve as per site reqt in the MCB DB complete with connection testing complete all as specified and directed.Make-Legrand, LK(L&T), Schneider |
| 120 | S&F Rigid non-metallic PVC conduit 25mm bore exclusive of boxes (junction/ terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed. |
| 121 | All as per item No 120.00 above but for size 40 mm bore complete all as specified and directed. |
| 122 | Taking down carefully LAN/telephone cables from existing conduit/casing capping and refixing the same including accessories such as couplers, lock nuts, saddles, pipe hooks etc and making good the disturbed surface & wall/ floor complete all as specified and directed. |
| 123 | S&F in replacementLED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.Make-Philips, Orient, Bajaj |
| 124 | S&F in replacement engagement lights including 5W LED coloured Adore Lamp B22 Red and green suitable for bulb holder complete all as specified and as directed by Engr-in-Charge. |
| 125 | S&F in replacement ceiling fans complete with blades, down rods, accessories, 230 V, 1200 mm sweep. Min air delivery 230 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ceiling fanwith remote of color white or (as per site requirment) complete with all accessories internally pre wired and including connecting up with three core flexible copper conductor cable with suitable size and making arrangement to hanging of fan to ceiling with proper hook nut bolt complete all as specified and directed. Make- Orient-Ecotech prime, Bajaj-Ethora plus, Havells-Enticer Prime |
| 126 | M&L for taking down of existing AC window type or split type and refixing the the same at its original position along with complete accessories including minor repiars and repair of PCB/ display, making good surface od disturbed area at wall complete all as specified and directed. |
| 127 | S&F PVC drain pipes threaded 32 mm dia and fith clamps at every 1 m along with bends and maintaining slope complete all as specified and directed by Engr in charge. |
| 128 | S&F GI Raceway made from 1.5mm thick pregalvanized sheet for top,bottom & sides and complete with top cover with rubber gasket of size 100x38mm complete for mounting and supporting the cable tray system,along with vertical bends, including taking down and re fixing and type of electric/signal cable, if require through wall/floor cutting and making good surface of disturbed area, complete all as specified and directed. |
| 129 | S&F GI bracket for raceway mentioned in above item here-in-before of 100mm width, complete all as specified and directed. |
| 130 | S&F coupler for raceway of 100 mm width complete all as specified and directed. Note: (a) Srl Item No 02.00 to 04.00, 08.00, 09.00, 11.00 to 13.00, 16.00, 18.00, 19.00, 23.00, 25.00, 45.00 to 47.00, 51.00, 52.00, 57.00 to 64.00, 69.00 to 71.00, 73.00, 75.00, 81.00, 83.00, 85.00, 91.00, 108.00, 110.00, 123.00 & 125.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. |
