|
| 1 | ALMIRAH STEEL LARGE , 1/2 HANGING 1/2 SHELVES/ALMIRAH GLAZED STEEL AND ALMIRAH FOR MAP STEELDRG NO : FD-1031, 1033 and 1034, FD-104(M) FD-106M (For Item No 01 to 10)Taking down/out old unserviceable handle and Supply and fixing chromium plate handle100 mm long complete all as specified and as shown on drg. |
| 2 | Taking down/ outold unserviceable lock and Supply and fixing 6 lever ofbrass lock complete all as specified and as shown on drg. |
| 3 | Taking down/out old lock cover and Supply and fixinglock cover made of 16 gauge MS sheet complete all as specified and as shown on drg . |
| 4 | Taking down/out old MS Round bar 8mm fixing with lock upper bar and below bar and same Supply and fixing of MS Round bar 8mm fixing with lock cover upper and lowercomplete all as specified and as shown on drg . |
| 5 | Taking down /out old worn out legs and Supply and fixing oflegs made of 18 gauge of MS sheet complete all as specified and as shown on drg . |
| 6 | Taking down old unserviceable hanging rod and Supply and fixinghanging rod20 mm bore mild steel chromium plated made of 1 mm thick conduit pipe , 915 mm long with both side steel socket complete all as specified and as shown on drg . |
| 7 | Taking down/out old unserviceable shelves with cleat and Supply and fixing shelves with cleat made of MS plain sheet 1mm thick complete all as specified and as shown on drg.. |
| 8 | Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg. (Almirah Large) |
| 9 | S & F hinges of size 75mm (ISI Marked) for the shutters of almirah large steel/almirha large steel with shelves/ Glazed Almirah double shutter including removing old U/S hinges all as specified, FD-1031,1032, 1033 and 1034, FD-104(M) FD-106M . |
| 10 | Removal of denting for the deshaped portion and scraping of complete old paint by paint remover OR sand paper of Almirah Large Steel.Almirah 1/2 hanging 1/2shelf & Almirah Glazed/steel, cleaning of rusted surface with including parts/item repaired / replaced under items No 1 to 10 above.Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 11 | ALMIRAH MED STEEL WITH SHELVES DRG NO FD-1032(For Item No 11 to 20)Taking down/out old unserviceable handle and Supply and fixing chromium plate handle100 mm long complete all as specified and as shown on drg . |
| 12 | Taking down/ outold unserviceable lock and Supply and fixing 6 lever ofbrass lock complete all as specified and as shown on drg. |
| 13 | Taking down/out old lock cover and Supply and fixinglock cover made of 16 gauge MS sheet complete all as specified and as shown on drg . |
| 14 | Taking down/out old MS Round bar 8mm fixing with lock upper bar and below bar & same Supply and fixing of MS Round bar 8mm fixing with lock cover upper and lowercomplete all as specified and as shown on drg . |
| 15 | Taking down old cleats and supply and fixing new cleats complete all as specified and as shown on drg . |
| 16 | S & F hinges of size 75mm (ISI Marked) for the shutters of almirah large steel complete all as specified and as shown on drg |
| 17 | Taking down /out old worn out legs and Supply and fixing oflegs made of 18 gauge of MS sheet complete all as specified and as shown on drg . |
| 18 | Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg . |
| 19 | Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . (Almirah Small/Med) |
| 20 | Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Almirah Med Steel .Almirah 1/2 hanging 1/2shelfcleaning of rusted surface with including parts/item repaired / replaced under items No 11 to 19 above.Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 21 | LOCKER BED SIDE STEEL :DRG NO FD-257& FD-1029 (For Item No 21 to 27)Taking down /out old unserviceable handle and Supply and fixing chromium plate handle , 100mm longGodrej Pattern complete all as specified and as shown on drg . |
| 22 | Taking down/ outold unserviceable lock and Supply and fixing 6 lever ofbrass lock complete all as specified and as shown on drg. |
| 23 | Taking down old unserviceable hasp & stapleand Supply and fixing new MS hasp and staple ,100mmsize complete all as specified and as shown on drg . |
| 24 | Taking down /out old worn out legs and Supply and fixing legs of 16 gauge MS sheet with size & shape as existscomplete all as specified and as shown on drg . |
| 25 | Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . |
| 26 | Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . (locker bed side steel) |
| 27 | Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Locker bed side steel .Locker Bed Side, cleaning of rusted surface with including parts/item repaired / replaced under items No 21 to 26 above.Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 28 | TABLE DINING OR\"SFD- 165 M (For Item No 28 to 33)Top and S/F New top made by 18/19mm thick block with 22 gauge aluminium sheet on around the top shell be provied complete all as specified and as shown on drg |
| 29 | Taking down old unserviceable legs and Supply and fixing legs of size 720mm, 25mm bore madeof 16 gaugeMS conduit pipe throughoutwith shape and sizeas exists complete all as specified and as shown on drg |
| 30 | All as per serialitem No 28 above but centre stiffner size 1600x25x25mm complete all as specified and as shown on drg |
| 31 | All as per serial item No 28above but side stiffener size 480x25x1.6mm complete all as specified and as shown on drg |
| 32 | Taking downold unserviceable shoe and Supply and fixing shoe PVCto legs complete all as specified and as shown on drg . |
| 33 | Welding of cracked joints on frame ,derusting, cleaning of old surface of frame with & including parts/ item repaired/replaced under item No 28 to 32above and applying two coats of white systhetic enamel paint over a coat of pink primer complete all as specified and as shown on drg . |
| 34 | RACK TOWEL STEELDRG No FD-106M & 1038 (For Item No 34 to 36) Taking out old leg and Supply and fixing new leg made out of 25mm bore MS tube having 1.5mm wall thickness, 2.08 Mtr long complete as specified and as shown on drg. |
| 35 | Taking down old unserviceable rubber shoe and supply and fixing new hard rubber shoe with size & shape as exists complete as specified and as shown on drg. |
| 36 | Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Rack Towel Steel .Rack towel steel, cleaning of rusted surface with including parts/item repaired / replaced under items No 34 to 35 above.Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 37 | RACK STEEL 3/4/6 TIER DRG NO FD- 106M & 1038 (a) (For Item No 37 to 39)Taking out old unserviceable shelves and Supply and fixing new shelves made of 20 gauge MS sheet exists and applying two coats of syntetic enamel paint white over a coat of red oxide primer with size and shape as exists complete all as specified and as shown on drgs. |
| 38 | Taking down old unserviceable leg and supply and fixing new leg made of angle iron with size and shape as complete all as specified and as shown on drgs. |
| 39 | Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Rack Steel .Rack steel, cleaning of rusted surface with including parts/item repaired / replaced under items No 37 to 38 above.Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 40 | TABLE OFFICE OFFR\"S STEEL/TABLE OFFICE CLK STEELDRG NO FD- 1003 & FD-1004 (For Item No 40 to 47)Taking out old unserviceable top and supply and fixing new top of size 1680mm (L)x870mm (W)x19mm made of 18/19 thick pre laminated MDF board, exterior grade, one side teak face & other side white balancing duly covered with 6mm thick teak wood beading all around top duly french polished with the reqd gloss steel screw to frame of complete all as specified and as shown on drgs. |
| 41 | All as per serial item No 40 above but of size 1220 (L) x610mm (W)x19mm complete all as specified and as shown on drg |
| 42 | Taking out old unserviceable lock and supply and fixing new brass lock 6 lever, afterremoving the dents of drawers and cup board to make it functionalcomplete all as specified and as shown on drgs. |
| 43 | Taking out old unserviceable leg and supply and fixing new leg made of 1.5mm thick MS square pipe with size & shape as exists complete all as specified and as shown on drgs. |
| 44 | Taking down/out old centre stiffner and supply and fixing new centre stiffner made of 1.5mm thick MS square tube with size & shape as exists complete all as specified and as shown on drgs. |
| 45 | All as per srl item No 40 above but side stiffner complte all as shown on drg. |
| 46 | Taking down old unserviceable hard rubber shoe and supply and fixing new hard rubber shoe with size & shape as exists complete all as specified and as shown on drgs. |
| 47 | Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Table office offrs/clk steel .Table, cleaning of rusted surface with including parts/item repaired / replaced under items No 40 to 46 above.Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 48 | TEAPOY VARANDAH (FD-288,383) (For Item No 48-52)Taking out old unserviceable top and supply and fixing new top of table made of18/19mm thick pre-laminated MDF board exterior grade of size 900x450mm, one side teak colour and another side white as balancing, table duly french polished required glass including 6mm thick teak woodedging all round the table complete all as specified and as shown on drgs |
| 49 | Taking out old unserviceable leg and supply and fixing new leg made out of 20mm dia MS conduit pipe having 1.5mm wall thickness with shape and size as exists and welded with frame complete all as specified and as shown on drgs. |
| 50 | Taking down U/S stiffnerand S&F new stiffner made out of 10mm MS round bar bent to shape and size welded with frame all as shown on drg . |
| 51 | Taking down U/S hard rubber shoe and S&F new hard rubber shoe shape and size welded with frame complete all as specified and as shown on drg |
| 52 | M& L preparation of old/new steel surface for painting andapplying two coatof synthetic enamelwhite paint on all internal and external surface of steel and new surface over a coat of red oxide complete all as shown on drawing. |
| 53 | Chair Steel Tubular with Arms & without Arms (FD-75M)(For Item No 53 to 57)Repair/Replacement of old unserviceable seat of chair and S& F of seat made out of 1st class teak wood duly canned as per Godrej Pattern complete all as specified and as shown on drg |
| 54 | S & Fof of back seat made out of seasoned shesham wood duly canned as per Godrej pattern complete all as specified and as shown on drg |
| 55 | S & Fofarms made out of seasoned shesham wood complete all as specified and as shown on drg |
| 56 | S&F Flat Iron Strip of 475 mm x25 mm 3 m thick weldedfor support to seat of Chair CB Steel complete all as specified and as shown on drg |
| 57 | Finish:- Painting to chair steel tubular with OG Paint after smoothing of surface of chair tubular steel with arms complete all as specified and as shown on drg |
| 58 | Chair Verandah : Drg No - FD/MAP/12 & FD-256)(For Item No 58 to 62)Welding (Gas /Elect)of frame, 10 mm round bar , legs where as required to make its actual shape and size all as directed by Engineer-in-Charge.(DRG NO FD-256 & FD/MAP/12) |
| 59 | Preparation of old steel surfaces with sand paper and painting with two coat of synthetic enamel paint complete all as specified and as shown on drg.(DRG No FD-256& FD/MAP/12) |
| 60 | Taking out old U/S rubber shoe and S&F new hard rubber shoe of 20 mm dia complete all as specified and as shown on drg. (FD-256 & FD/MAP/12) |
| 61 | Cutting/Taking out old unserviceable cane from chair Vereandah and supplying recanning of chair with white plastic cane (Oval shape) 4mm wide and canning seat and back with 4mm wide cane as per the Matt pattern complete all as specified and as shown on drg.(FD-256). |
| 62 | Taking out old unserviceable PVC Seat and back , supply and fixing new PVC Seat & back 4MM thick with weight not less than 1.85 Kgs and grooves 90x10 No on seat & back. Complete all as specified and as shown on drg. make of PVC Seat & Back(DRG No FD-256 & FD/MAP/12) |
| 63 | Rack Shoe Steel (FD/E6/MAP/02(R) ) (For Item No 63 to 67)Repair /Wealding of Main frame (legs) of Rack shoe steel shall be made of 25mm dia MS pipe (18 gauge). Top and bottom outer frame work all as per details shown in the drawing. |
| 64 | Repair /Welding ofJali shelves (05 Nos) shall be made with 3mm dis MS rods all as per details shown in the drawing. |
| 65 | All joints/welding/fixing shall be done in accordance with standard workmanship complete all as specified and as shown on drg |
| 66 | Hard rubber/PVC shoe shall be provided to the bottom of each leg complete all as specified and as shown on drg |
| 67 | Rack Shoe Steel complete paintand preparation of old steel surfaces with sand paper and painting with two coat of synthetic enamel paint (White) complete all as specified and as shown on drg FD-E6/MAP/02 (R). |
| 68 | COUCH EXAMINATIONALL TYPEDRG NO FD-122 : (For Item No 68 to 76 )Taking out old unserviceable Rexene cloth, Hessian cloth, Dunlop foam, coir fibre/cotton layers for side and lower planksand Supply and fixingnew Rexene cloth, Hessian cloth, coir fibre and 12 mm thick cotton layer and 25 mm thick Dunlop Pillo of 32 density and covered with UPHOLSTRY (Leatherite) cloth complete with and including replacement of damaged spring and damaged planks of 1st class teak wood where ever required complete all as specified and as shown on drgs.Note : Wooden plank andspring shall be measured and paid separetely. |
| 69 | Taking out old unserviceable planks 1 st class teak wood 12 mm thick and new planks 1 st class teak wood 12 mm thick complete all as specified and as shown on drgs. |
| 70 | Taking out old unserviceable spring and new spring required for Couch Examination complete all as specified and as shown on drgs. |
| 71 | Taking down old unserviceable leg and Supply and fixing new leg of MS Square pipe 25 mm having 1.6mm wall thicknessany tint including necessary welding to stiffners, complete all as specified and as shown on drgs. |
| 72 | All as item ser No, 68 but centre stiffner. Size-25mm square tube steel including welding to leg complete all as specified and as shown on drg |
| 73 | All as item ser No, 68 but side stiffner. Size-25mm square tube steelincluding welding to leg complete all as specified and as shown on drg |
| 74 | Taking down old damaged/ broken hard rubber shoe and Supply and fixingnew hard rubber shoe of approved quality complete all as specified and as directed. |
| 75 | Taking out old unserviceable drawers and supply and fixing new drawers complete with knob as per existing sizeand shapeas shown on drg . |
| 76 | Removal of denting of deshaped portion couch examination and panting/polishing with two coats of synthetic enamel OG paint/polish complete all as specified and as shown drg. |
| 77 | DESK SCHOOL TYPE \"A\" DESK ADULT, DESK 4X6 :DRG NO FD-107& 124: (For Items No 76 to 86)Taking down U/S 19 mm thick back plank of box and S&F 19MM Plank made 1st class hard wood teak (MP teak) free from knoss, cracks etc. with permissible moisture contents as per the shape and size as exists complete all as specified and as shown drg. |
| 78 | All as per items No77 but side plank. Size-19mm thick 370 x 140mm complete all as specified andas shown on drg . |
| 79 | All as per items No 77 but Top/Bottom plank. 19mm thick 365 x 800 mm complete all as specified andas shown on drg . |
| 80 | Taking down U/S legs and supply and fixing legs of 25mm tube legs size as exists complete all as specified and as shown drg. |
| 81 | All as per items No 77 but Tube Foot Rest. Size-25mm square tube steel complete all as specified andas shown on drg . |
| 82 | Taking down old U/S rubber shoe and S/F new hard rubber shoe complete rest as per drg complete as per the shape and size as exists complete all as specified and as on shown drg. |
| 83 | Taking out existing unserviceable block board from Desk school and provide new block board of size 800x455x19 mm thick and screwed to fix complete all as per drg. |
| 84 | Taking out unserviceable sides of block board from Desk school and supply & fix new sides of block board of size 380 x 140 x 19 mm thickcomplete all as specified and as shown on drg |
| 85 | Taking out unserviceable partition from Desk school & S&F in partition made out of block board of size 370x120x19 mm thick complete all as specified and as shown on drg |
| 86 | Removal of denting of deshaped portion desk fram and panting with two coats of synthetic enamel OG paint complete all as specified and as shown drg. |
| 87 | RACK PIGEON HOLES (STEEL)/ALMIRAH PIGEON HOLES: DRG NO FD-1037 (For Items No 87 to 92)Taking down 1mm thick MS Sheet from any portion of rack Pigeon Hole steel and SF new 1MM thick MS Sheet as per the shape and size as exists for LHS and RHS of Pigeon hole steel and apply one coatof refd oxide priomer complete all as specified and as shown on drg |
| 88 | Taking out existing damaged MS sheet from Top of rack Pigeon hole steel and supply and fixing new 1 mm thick MS steet complete all as specified and as shown on drg |
| 89 | Taking outold unserviceable lock and Supply and fixing brasslock 6 lever Godrej pattern complete all as specified and as shown on drg . |
| 90 | Taking out existing damaged MS sheet from back of rack Pigeon hole steel and supply and fixing new 1 mm thick MS steet complete all as specified and as shown on drg |
| 91 | Taking down U/S legs of Angle Iron and S/F new leg made out angle iron 40X40X4MM thick Angle iron welded to 1mm thick M/S sheet all as specified and as shown drg andcomplete all as specified and as shown on drg. |
| 92 | Removal of denting for the deshaped portion of rack pigen holes (steel) cleaning of rusted surface with including parts/item repaired/replaced under item 86 to 90above including preparation of patched by applying putty over two coats of paint grey/olive green systhetic enamed on the external surfaces and hammertone/olive green synthetic enamel on the external surfaces by spray guncomplete all as specified and as shown on drg. |
| 93 | SCREEN MOVEABLE TUBLER STEEL WITH CLOTH: DRG NO FD-83 (For Items No 93 to 98)Taking out oldcaster wheel and S&F new caster wheel 50mm dia complete all as specified and as shown on drg |
| 94 | Taking out old U/S legsand S&F new legs of 25 mm dia MS tube complete as shown in drg and as directedat site (Appx length 0.25 meter welded with 25 mm dia MS tube pipe complete all as specified and as shown on drg |
| 95 | Taking out old U/Sbottom railand S&F bottom rail of 25 mm tube complete all as specified and as shown on drg |
| 96 | Taking out old Hook and S&F new GI Hook complete as shown in drgand as directed. |
| 97 | Taking down old U/S cloth and S&F new curtain cloth green colour of approved quality duly stitched at both rails and comprising 03 Nos in a set of size 136 x 111cm one number and 136 x 54 cm two Nos with cloth hanging spring complete all as specified and as shown on drg |
| 98 | M&L denting of deshaped portion, derusting and cleaning of rusted surfaces by including preparationof patches by applying putty etc and a coat of red oxide primer wherever equired andapplying two coat of synthetic enamel paint whiteas required shed by spray gun on all steelsurfaces complete all as specified and as shown on drg |
| 99 | STOOL STEEL 305X305X510 MM (For Items No 99 to 102)Taking out old rusted legs and S&F new legs made of 16 gauge MS sheetcomplete all as specified and as shown on drg |
| 100 | Taking out old rusted stiffeners and S&F new stiffenersmade of 16 gauge MS sheet complete all as specified and as shown on drg |
| 101 | Taking out old unserviceable top and S&F new top 16 gauge MS sheet sizeand shape complete all as specified and as shown on drg |
| 102 | M&L denting of deshaped portion and scraping of complete old paint by paint remover OR sand paper,derusting, cleaning of rusted surfaces including preparation of patches by applying putty etc wherever required and applying two coats of olive green synthetic enamel paint by spray gun on internal & external surfaces complete all as specified and shown on drg. |
| 103 | TABLE BED SIDE STEEL : DRG NO HFD-2005/FD-133(M) & TP Godrej (For Items No 103 to 112)M&L denting of deshaped portion and scraping of complete old paint by paint remover OR sand paper , derusting and cleaning of rusted surface and sandpapering inside and outside including preparation of patches by applying putty and a coat of red oxide primer and applying two coats of synthetic enamel paint white with spray gun complete all as specified and as shown on drg |
| 104 | Taking outworn out legs and S&F new legs made of 25 mm dia 1.6 mm thick MS tube 150 mm long complete all as specified and as shown on drg |
| 105 | Taking out old worn out long rail and S&F new long rail made of 20 mm dia and 1.6 mm thick MS tube 500 mm long complete all as specified and as shown on drg. |
| 106 | Taking out old worn out short rail and S&F new short rail made of 20 mm dia and 1.6 mm thick MS tube 300 mm long complete all as specified and as shown on drg. |
| 107 | Taking out unserviceable handle and S&F new mild steel chromium plated handle of same as shown in drg and as directedcomplete all as specified and as shown on drg. |
| 108 | Taking out old unserviceable hinges and S&F new hinges as per existing table bed side steel complete all as specified and as shown on drg |
| 109 | Taking out unserviceable top and S&F new top of size 600x380made of premlaminated particle board 18/19mm thick exterior grade both side laminated one sideteak face other side white balancing bonded withBWP type phenol formaldehyde synthetic resinas per IS-12823 ISI marked and around with 6mm teak wood beading all around top and fitted with steel screw to frame of steel table complete all as specified and as shown on drg |
| 110 | Taking out unserviceable top and S&F new steel top made of 20 gauge thick plain MS sheet duly painted with white syntheticenamel paint over a coat of red oxide to match with existing surface complete all as specified and as shown on drg |
| 111 | Taking out unserviceable shutter and S&F new shutter made of 20 gauge thick plain MS sheet complete all as specified and as shown on drg |
| 112 | Taking down and U/S hard rubber shoe and S&F new hard rubber shoe complete all as specified and as shown on drg |
| 113 | STEP STEEL (2&3 TIERS)DRG NO FD-13 (For Items No 113 to 117)Taking ot old U/S sheet from step and S&F new sheet made out of18 gauge MS sheet of size 460x230mmwith size & shape as exists and welded with framecomplete all as specified and as shown on drg. |
| 114 | Taking down old U/S back legs and S/F new back side legs of 18 gauge 22.5 dia tube shape as exists complete all as specified and as shown on drg. |
| 115 | All as per item No 113 above but front side leg of hight not more than 150 mm complete all as specified and as shown on drg |
| 116 | Taking down old U/S castore and S/F castorewheel without rubber for front legs only exists complete all as specified and as shown on drg. |
| 117 | M&L denting of deshaped portion and scraping of complete old paint by paint remover OR sand paper , derusting and cleaning of rusted surface and sandpapering inside and outside including preparation of patches by applying puttyand applying two coats of synthetic enamel paint white with spray gun complete all as specified and shown on drg. |
| 118 | TABLE INVALID DRG NO FD-131(For Items No 118 to 121)Taking down old U/S stanless steel top and S/F 18 gauge stanless steel size shape as existscomplete all as specified and as shown on drgs.1070x460x1 mm thick complete all as specified and as shown on drg |
| 119 | Taking down old U/S legs and S/F new legs made of 25mm dia 20 gauge steel tube shape and size as existsprimercomplete all as specified and as shown on drgs. |
| 120 | Taking down old U/S ball bearing and S&F 50mm dia ball bearing rubbers castors oven baked finish all as specified and as shown on drg. |
| 121 | M&L denting of deshaped portion and scraping of complete old paint by paint remover OR sand paper , derusting and cleaning of rusted surfaces by including preparationof patches by applying putty etc andandapplying two coat of synthetic enamel paint white by spray gun on all steelsurfacesover a coat of red oxide complete specified and shown on drg. |
| 122 | TROLLEY HOT FOOD: DRG NO FD-133 (For Items No 122 to 126)Element and S/F new tubular Element Voltage 1250 volts 230/AC DC all as specified and as shown on drg. |
| 123 | Taking down old U/S rotary switch and S/F multistage rotary switch for heat control complete all as specified and as shown on drg |
| 124 | Taking down old glass wool and S/F new glass wool on heating chamber, all as shape shown complete all as specified and as shown on drg |
| 125 | Taking down old U/S stainless steel food vessal and S/F new stanless steel food vessed of 200mm dia, wide and 200 did, Deep with lead with deep setting wids all as shown on specified and as shown on drg. |
| 126 | Taking down old U/S ball bearing and S/F heavy duty ball bearing type 200 dia rubber wheel collapseable counter 390x500 complete all as specified and as shown on drg |
| 127 | TROLLY SOILED LINEN SIGNLE AND DOUBLE UNIT.DRG NO FD-132 (For Items No 127 to 132)Taking down old U/S canvas bag and S/F canvas bag as per size and shape exists complete as on shown complete all as specified and as shown on drg |
| 128 | Taking down old U/S bottom frame and S/F new bottom frame made out of 19mm circular tube bottom fram complete all asspecified and shown on drg duly painted with one coat of red oxide primer complete all as specified and as shown on drg |
| 129 | Taking down old U/S legsand S/F new legs made out of 19mm circular tube legs complete all asspecified and shown on drg duly painted with one coat of red oxide primer complete all as specified and as shown on drg |
| 130 | Taking down old U/S stiftener and S/F new stiffner made out of 19 mm tube stifftener and painted with one coat of red oxide primer complete all as specified and as shown on drg |
| 131 | Taking down old U/S castor wheel and S/F new 50 dia castor wheel complete all as specified and as shown on drg |
| 132 | M&L denting of deshaped portion and scraping of complete old paint by paint remover OR sand paper , derusting and cleaning of rusted surfaces by including preparationof patches by applying putty etc and two coat of synthetic enamel paint white andas required shed by spray gun on all steelsurfaces complete all as specified and as shown on drg |
| 133 | PATIENT TROLLY STRUCTURE (TP) (For Items No 133 to 135)Taking down old U/S stainles steel strucher top and S/F 1mm stainless steel top design complete all as specifed and as shown on drg. |
| 134 | Taking down side U/S ball bearing and S/F heavy duty bass bearing 75 dia rubber wheel callapsable complete all as specified and as shown on drg |
| 135 | M&L denting of deshaped portion, derusting and cleaning of rusted surfaces and scraping of complete old paint by paint remover OR sand paperby including preparationof patches by applying putty etcwherever required andapplying two coat of synthetic enamel paint whiteas required shed by spray gun on all steelsurfacescomplete all as specified and as shown on drg |
| 136 | TABLE LABORATORY:FD-140 (For Items No 136 to 144)Stainles steel sheet from top of table and S/F new Stainles steel sheet as per exists shape and sizecomplete as on specified as on show drg of size 3\"x12\"x1mm thick with one coat of red oxide primer and 2 coat of SE paint complete all as specified and as shown on drg |
| 137 | Taking down old U/S block board and S/F 19mm thick block board of size 3\"x4\"x12\" BWR grade ISI Mark 303-1885 with shape and size complete all as specified and as shown on drg. |
| 138 | Taking down old U/S frontdrawer and S/F new front drawer and drawer made out of block board with teak veneer one side and block board requred for one drawer 2x370x260mm complete with size and shape exists all as complete as on specified as on shown on drg. |
| 139 | Taking down old U/S shutter and S/F new shutter with size and shape exists complete as on specified and shown on drg . |
| 140 | Taking down old U/S top rail and S/F top rail of size 660x50x25mm made of 1st class hard wood teak (MP) free form knots craks etc. with permissible moiste contents complete all as specified and as shown on drg |
| 141 | All as above but item No 140 stiffner of size 800x50x25mm. Complete all as specified and shown on drg. |
| 142 | All as above but item No 140 legs size 100x50x50mm. Complete all as specified and shown on drg. |
| 143 | All as above but item No 140 side stiffer 760x50x25mm. Complete all as specified and shown on drg. |
| 144 | Preparation of surface with sand paper after scrubbingand applying two coats of French polishing to table laboratory, with andincluding to the parts repaired/replaced under item No. 135 to 142 to the required gloss to match with the existing complete all as specified and as shown on drgs. |
| 145 | TABLE PREPARATORY SS TOP DRG NO :TP (For Items No 145 to 148)Taking down old U/S stailes steel top and S/F 1mm thick stainles steel top of table preparatory with size and shape exists all as complete as on specified as on show on drg. |
| 146 | Taking down old U/S Legs and S/F 25mm tube legs with shape and size and shape exists and applying one coat of red oxide primer all as complete as on specified as on show on drg. |
| 147 | Taking down old U/S top frame and S/F 25mm tube fram with shape and size as on show on drg. |
| 148 | Remove of denting for the deshaped portion and scraping of complete old paint by paint remover OR sand paperof table preparatory cleaning of rusted surface with including parts/items repaired/replaced under item No 145 to 147above including preparation of patches by applying putty two and painting with two coats of synthetic enamel paint white on the table preparatory fram by spray complete all as specified and as shown on drg. |
| 149 | THREE SEATED STEEL CHAIR POWDER COATED (TP) (FOR ITEMS NO 149 TO 150)Taking down old U/S sheet from chairand S/F new sheet of steel chair made out of MS Sheet duly painted with 2 coat of synthetic enamel paint powder coated size and shape exists complete all as specified and as shown on drg. |
| 150 | Taking down old U/S legs and S/F new legs for three seater steel chair powder coated MS sheet duly painted with 2 coat of synthetic enalmelwhite paint size shap exists complete as on specified and as shown on drg. |
| 151 | ICU Bed Make - Godrej (For Item No 151 to 159)Taking down /out old unserviceable 125mm Twin Wheel Castor with Diagonal Braking and fixingnew 125mm Twin Wheel Castor with Diagonal complete all as specified and as shown on drg (Set of 04 Nos). |
| 152 | Taking down /out old unserviceablehydraulic jack for Compliant Polymer Molded Side Rails and Head and Foot Paneland fixingnew hydraulic jack for Compliant Polymer Molded Side Rails and Head and Foot Panel complete all as specified and as shown on drg (02 x Nos = 1 Set). |
| 153 | Taking down /out old unserviceableBuffers on all four cornersand fixingnew Buffers on all four corners and Foot Panel complete all as specified and as shown on drg. |
| 154 | Taking down /out old unserviceableMattress Aar Kay 10cm Four Section Mattress for Fowler & ICU Beds and fixingnew Aar Kay 10cm Four Section Mattress for Fowler & ICU Beds complete all as specified and as shown on drg. |
| 155 | Repair of old unserviceableUrine Bag Hookand fixingnew Urine Bag Hook complete all as specified and as shown on drg. |
| 156 | Repairold unserviceableACP (Nurse Control Panel) complete all as specified and as shown on drg. |
| 157 | Repair of old unserviceableOxygen Bottle Arrangement complete all as specified and as shown on drg. |
| 158 | Repairof old unserviceableUnder Bed Light complete all as specified and as shown on drg. |
| 159 | Taking down /out old unserviceableHydraulic Lifting Pole and fixingnew Hydraulic Lifting Polecomplete all as specified and as shown on drg. |
