|
| 1 | Material and labour for taking up water mains 150/100 mm dia CI/GI pipe with all fittings (including all fittings),complete all as specified and directed by Engr-in-Charge. |
| 2 | Material and labour for taking up water mains 80 mm dia CI/GI pipe with all fittings (including all fittings),complete all as specified and directed by Engr-in-Charge. |
| 3 | Material and labour for taking up water mains 50 mm dia CI/GI pipe with all fittings (including all fittings),complete all as specified and directed by Engr-in-Charge. |
| 4 | Material and labour for taking up water mains 20 mm dia CI/GI pipe with all fittings (including all fittings),complete all as specified and directed by Engr-in-Charge. |
| 5 | Material and labour for refixing the old tube and fittings of 20 mm dia in old or new connections in celings, walls, complete all as specified and directed by Engr-in-Charge. |
| 6 | Cutting of existing watermain 300mm bore in position for insertion of new Tee 300mmx300mm X 150 mm (1 No) all ends flanged and 2 Nos connecting pieces (socketed/ spigoted) 150 mm bore and making joint ,complete all as specified and directed by Engr-in-Charge. Note : Fittings such as tee, elbows, collar, reducer etc joint and jointing material for fixing of cast iron fittings shall be measured and paid separately. |
| 7 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of soft/loose soil, Complete all as specified and directed by Engr-in-Charge. |
| 8 | Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layernot exceeding 25cm thick after pipes have beenlaid and tested complete, all as specified and directed by Engineer-in-Charge |
| 9 | Removing excavated material to a distance notexceeding50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete, all as specified and directed by Engineer-in-Charge |
| 10 | M&L for laying tubes medium grade galvanised with all fittings laid in trenches of size 150 mm bore including all fittings such as elbows, Tee, socket, union, reducers, etc complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for laying tubes medium grade galvanised with all fittings laid in trenches of size 100mm bore including all fittings such as elbows, Tee, socket, union, reducers, etc complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for laying tubes medium grade galvanised with all fittings laid in trenches of size 80mm bore including all fittings such as elbows, Tee, socket, union, reducers, etc complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for laying tubes medium grade galvanised with all fittings laid in trenches of size 50mm bore including all fittings such as elbows, Tee, socket, union, reducers, etc complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for laying tubes medium grade galvanised with all fittings laid in trenches of size 25mm bore including all fittings such as elbows, Tee, socket, union, reducers, etc complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for laying tubes medium grade galvanised with all fittings laid in trenches of size 20mm bore including all fittings such as elbows, Tee, socket, union, reducers, etc complete all as specified and directed by Engr-in-Charge. |
| 16 | Supply and fix in replacement cast iron sluice valve suitable of size 150 mm (PN 1.6) ISI Marked with iron wheel headboth end flanged, non rising type and jointing withthe rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing,complete all as specified and directed by Engr-in-Charge. |
| 17 | Supply and fix in replacement cast iron sluice valve suitable of size 100 mm (PN 1.6) ISI Marked with iron wheel headboth end flanged, non rising type and jointing withthe rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing,complete all as specified and directed by Engr-in-Charge. |
| 18 | Supply and fix in replacement cast iron sluice valve suitable of size 80 mm (PN 1.6) ISI Marked with iron wheel headboth end flanged, non rising type and jointing withthe rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing,complete all as specified and directed by Engr-in-Charge. |
| 19 | Supply and fixing gun metal gate valve ISI marked cast copper alloy screwed down high pressure with clutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified for the size 50 mm dia bore. |
| 20 | Supply and fixing gun metal gate valve ISI marked cast copper alloy screwed down high pressure with clutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified for the size 25 mm dia bore. |
| 21 | Supply and fixing gun metal gate valve ISI marked cast copper alloy screwed down high pressure with clutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified for the size 20 mm dia bore. |
| 22 | M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing with pre mix bituminuos carpet /Pcc complete all as specified and directed by Engr-in-Charge. |
| 23 | Material & labour cement concrete in foundation,filling andmass concrete type C2 1:3:6(40mm graded aggregate)forproviding thrust block ,complete all as specified and directed by Engr-in-Charge. |
| 24 | Brickwork with sub class \"B\" bricks, straightor curved on plan exc 6m mean radius, built in 1:3 in CM ,complete all as specified and directed by Engr-in-Charge. |
| 25 | Material & labour rendering 10mm thick on fair faces of bricks works or concrete surfacesin cement plaster and add or deduct to/from the rates for rendering for each 5mm thickness over or under 10 mm. (CP 1:3),complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for constructionof stone masonary valve pit size 1.2 mtr x 1.20mtr x 1.2mtr (internal dimention) including stone work, PCC work and MS sheet work as per site requirment, Complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for constructionof stone masonary valve pit size 900mm x 600mmr x 600 mm (internal dimention) including stone work, PCC work and MS sheet work as per site requirment, Complete all as specified and directed by Engr-in-Charge. |
| 28 | Supply,fixing Compact universal non;gaseous chemical dosing system with the following specifications: System suitable for both solutions & light slurries,Superior compatability with aggresssive chemicals,Mono-compartment 100L water treatment station with propotional dose adjustment options,powerful motorised fluid delivery drive with dry -run protection,Off-gassing solutions & dry run prevention,Prime loss: Zero,Efficientelectro-mechanical blend module: prevents vortex formations,Fluid release upto 100 LPH independent of back pressure upto 10 Bars,Continous chemical release with accurate output reproducibility,Integrated plug & play system operating on single phase230V 50Hz power source complete all as specified and as directed. Make: Declibac or any other equivalent. |
| 29 | Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece, flanges(any type) caps, plugs up to 150 mm bore. ,complete all as specified and directed by Engr-in-Charge. |
| 30 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but lenth of bolt exc 5cm and n exc 10 cm long and diameter of neck 10mm ,complete all as specified and directed by Engr-in-Charge. |
| 31 | Supply & fixing MS structural work fabricated from standard sections (MS rounds, angles, channels, slotted angles etc) including cutting to size, drilling, welding including cost of dash fast ers, clamps including two or more coats of synthetic enamel paint over one coat of primer after surface prepartion including cutting and making ood walls.in pump (room, sump covers, water tank covers etc.), complete all as specified and directed by Engr-in-Charge. |
| 32 | Supply and fixing CI two air outlet air release valve with nuts bolts rubber incersetion sheet etc complete of size 80mm bore, complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply and fixing 0f of Cast Iron Non return valve suitable for 150 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing withthe rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers, complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg, complete all as specified and directed by Engr-in-Charge. |
| 35 | Supplying, installation, testing and commissioning of non-clog Submersible Sewage Lifting Pumps set of 3.0 HP capacity, 415 Volts, 3-phase, 50 Hz, having discharge capacity upto 8.0 Cum/hr @ 10 M head , suction and delivery size 50 mm x 50 mm, complete with starter, cable from pump set to feeder pillar box, cable connections with suitable thimbles, necessary wiring, HDPE pipe of required size up to surface of sewage well and connection to GI 50 mm pipe, including provision of automatic operation through level sensors, complete all as specified and directed by Engr-in-Charge. Note: Rate quoted shall be deemed inclusive of level sensors & all arrangements & material required for suspending the pump set in sewage well. |
| 36 | Supplying, installation, testing and commissioning of outdoor type Busbar Chambers of size 80x80x70cm (Feeder piler box) fabricated by MS Sheet of size 3.14 mm gauge mounting on angle iron frame suitable for 415 Volts, 3phase, 4wire AC as specified and with and including aluminium bus bar of cap 400 amp installed on porcelain insulators including MCCB 63 amp, 16KA, 4pole, 415Volt for incoming and automatic starter three phase with level controller.The Busbar Chambers shall be dust proof, vermin proof, and 40x40x6mm angle iron framework, front opening with locking arrangement duly paintedwith two coats of grey enamel paint over a coat of red oxide primer on the outside and two coats of red oxide primer in the inside, complete all as specified and directed by Engr-in-Charge. |
| 37 | Supply and Laying and fixing or passing through pipes or laid under floor or through walls etc jointing and testing LTCross Linked Polythene Insulated(XLPE insulated) galvanized steel striparmoured electric cable size 10 sqmm 4 core, 1100volt grade heavy duty ISI marked with aluminium conductor and overall served with an outer sheath of PVC, of cross sectional areacomplete all as specified & directed by Engr-in-Charge. Note :Excavation, earthwork, Sand Cushioning, Cable covers, Pipe for cable protection to be measured and paid for separately |
| 38 | Description all as per ser item no 37.00 here in before but of size 25 sqmm 3.5 core, complete all as specified & directed by Engr-in-Charge. |
| 39 | Supply and laying DWC (Double wall corruguated) pipe 40/32 mm conforming to IS-14930/ IS-16205 for protection of cable including necessary snap fit coupler reqd for fixing,complete all as specified and directed by Engr-in-charge. |
| 40 | M&L for Aluminium thimble suitable for 10 Sqmm 4 core aluminium cable, complete all as specified & directed by Engr-in-Charge. |
| 41 | M&L for Aluminium thimble suitable for 25 Sqmm 3.5 core aluminium cable, complete all as specified & directed by Engr-in-Charge. |
| 42 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 32×6mmas earthing lead by means of bolts, nuts, check nuts and washers of galvanised standard iron or steel all as specified or indicated in electrical plate no 3 of MES Part-I, including testing on completion including the material and labour of the following :-(a) Excavation and earth work for drilling hole for electrodein any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1.(c) Precast RCC coverwith suitablehandle 40 mm thickinPCC1:2:4type B-1,reinforced with welded steel wirefabric weighing notless than 1.87 Kg/Sqm.(d) Funnelwithwatering pipe of GI20 mm nominal bore medium grade and copper lugs etc all as specified. (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtrlongforprotectionof earthing lead from mechanical injury or tempering.(f) Requisite quantity of common salt and charcoal.(g) Testing of earthing.Note : On testing after completionof earthing, ifthe desired earth resistanceisnotobtained,theearthingwill bere-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge. |
| 43 | M&L Lead joint for Spigot and Socket pipes and fittings fo 100 mm bore , complete all as specified & directed by Engr-in-Charge. |
