|
| 1 | Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steelventilators(without taking off shutters from the frames)areanot exceeding 1.50 sqm eachincluding making good with plastering/rendering etc around the finished opening of the disturbed surface withcomplete all as specified and asdirected. |
| 2 | Taking down chowkhats or frames with shuttersof PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steelventilators(without taking off shutters from the frames) areaexceeding 1.50 sqm but not exceeding 4.00 Sqm each including making good with plastering/rendering etc around the finished opening of the disrubed surface withcomplete all as specified and asdirected. |
| 3 | Taking down door shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm eachcomplete all as specified and as directed. |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45mmx70 mmcomprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms )fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750kg /cum and screw withdrawal strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmmmodulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water / moisture proof and fire retardent and fixed in position With MS hold Fast /SS Dash Fastner incl S&F (03 Nos Per Frame ) 100 mm long SS Butt Hinges complete all as specified and asdirected. |
| 5 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 65mmx 125 mmcomprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms )fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750kg /cum and screw withdrawal strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmmmodulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water / moisture proof and fire retardent and fixed in position With MS hold Fast /SS Dash Fastner incl S&F (03 Nos Per Frame ) 100 mm long SS Butt Hinges etc,completeas specified and as directed. |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650kg /cum and screw withdrawal strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water / moisture proof and fire retardent and fixing and including S&F of 02 Nos (per Leaf) SS 150mm long ,tower bolt , 02 Nos (per Leaf) SS 150mm long handle etc, complete all as specified and directed. |
| 7 | S&F Factory Made 30mm thick 100% Solid WPC ( Wood polymer Composite ) WiremeshDoor Shutter of required size comprising ofvirgin PVC resin of K Value 57-60 ( Suspensiongrade ),calcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cummanufactured by \"RAJSHRI\" an ISO 9001 - 2015Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum compresieve strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category withProperty of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. PVC foil of minimum14 microns thick of approved design pastedon both faces of shutter. For fixing Mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, scres and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company :For Internal/Balcony/Main Doors, and including S&F of 3 Nos for each door Stainless steel 100mm long butt hinges with Stainlessd steel screws, 2 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked) 2 Nos stainles steel handles, 125 mm long (ISI marked)01nos of helical door spring of 300 mm length. |
| 8 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and as directed. |
| 9 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed. |
| 10 | S&F factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard woodwith lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat etc,complete all as specified and as directed. |
| 11 | S&F for Prelaminated with sunmica Flush door shutters 35 mm thick, solid core construction and plywood face is covered with decorative face veneer with lipping frame edging to match with mortice lock and handle complete all as specified and directed. |
| 12 | S&F for 2nd class hardwood 35mm thick gauzed/Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24;completeall as specified and directed. |
| 13 | S &F of mild steel butt hinges 75 mm size complete all as specified and directed. |
| 14 | S &F of mild steel butt hinges 100 mm size complete all as specified and directed. |
| 15 | S&F of aluminium anodized tower bolt of size 150 mm long incl necessary screw complete all as specified and directed. |
| 16 | S&F of aluminium anodized tower bolt of size 200 mm long incl necessary screwcomplete all as specified and directed. |
| 17 | S&F aluminum anodisedhandle of size 125mm longnecessary \"Bow Handle D type\" completeall as specified and directed. |
| 18 | S&F aluminum anodisedhandle of size 150mm longnecessary \"Bow Handle D type\" completeall as specified and directed. |
| 19 | S&F for aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed. |
| 20 | S&F 100mm size single action door spring hinge complete all as specified and directed. |
| 21 | S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long complete all as specified and directed. |
| 22 | M&L for preparation of new or previously untreatedwooden surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over& including M&L a coat of pink primer complete all as specified and directed. |
| 23 | S&F factory made box type steel window(BWM) with side hung shutter with or with out coller opening as shown in Drg No CEJZ/TD/20 sheet 1/3 to 3/3 complete with glazing bars, dovetailed or welded including taking down existing window /ventilator complete all as specified and as directedNote :- (i) Both shutter (wherever applicable) will be joined internally with flat iron of size 40x4mm and quoted rate deemed to include the cost component of the same(ii) Guard bar, glass panes & wire cloth shall be measured and paid seprately |
| 24 | All as per item No 23.00 above but without glazing bars complete all as specified and directed. |
| 25 | S&F Box type steel ventilator with top hung shutter including hinges with steel handle and steel peg stay, including taking down existing window /ventilatorcomplete all as specified and directed. |
| 26 | All as per item No 25.00above but without glazing bars complete all as specified and directed. |
| 27 | M&L for rolled mild steel sections like Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforunning Metreing to Fe-290 Gde E-165 and similar work confirunning Metreing to Fe-290Gde E-165 complete all as specified and as directed. |
| 28 | S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staplescomplete all as specified & directed. |
| 29 | S&F 3mm thickplain glasstype and glazingwith oil putty in square n.exc 0.5 sqm complete all as specifiedand directed. |
| 30 | S&F for 3 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed. |
| 31 | S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staplescomplete all as specified & directed. |
| 32 | M&L preparation of new or previously untreatedsteel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over& including M&L singlecoat of red- oxide, zinc chrome primer complete all as specified and as directed. |
| 33 | S&F aluminium anodised frame/Partition/Section, made out of aluminium section / aluminium chanel, powder coated(minimum thickness of powder coating not less than 50 micron), for doors, windows, ventilators, Partition with one or more rebate including jointing cleat for fixing etc. including taking down old unserviceable frame with shutter (wooden/alum) complete all as specified and as directed. |
| 34 | S&F anodised aluminium door shutter, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos andaluminium hinges 04 Nos in each leaf (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ. |
| 35 | Supply & fixing anodised aluminium window/ventilator shutter, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos andaluminium hinges 04 Nos in each leaf (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed.Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ. |
| 36 | S&F 4.8 mm thick sheet glass ordinary quality in squares not exceeding 0.5Square Metre in each pane and fixed etc. as required or as directed complete all as specified & directed. |
| 37 | M&L 12 mm thick Prelaminated particle board, interior grade, prelaminated bothside with decorative choice lamination & other side balancing white lamination, fixed with screws to timber or aluminium frame work complete all as specifified and directed. |
| 38 | S & F aluminium (extruded section) body door closer hydraulically regulated, designation No3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked complete all as specified & directed. |
| 39 | M&L 12mm thick Toughned glass (Plain/ frosted)as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required fixed to floor machineincluding 2x stainless steel handle of size 400mm long or 100mm dia glass door knob, heavy duty Floor Machineincluding engraved of any pattern/design as (approved by GE),complete all as specified and directaed. |
| 40 | M&L for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 41 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets fixed in any position with nails fixed with screws complete all as specified and as directed. |
| 42 | S& F hollow PVC lining consisting 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and as directed. |
| 43 | S&F in replacement Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all asspecified and directed. |
| 44 | M&L for GI frame work for seamless ceiling comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c inteRunning Metreediate channel 0.9mm thickhaving two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2M length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to inteRunning Metreediate channel at 457mm c/c and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and including M&L for applying 02 mm thick plaster of paris over and including S&F 4mm thick Asbestos cement building boards (E Classic), plain /Patternfixed as per manufacturers instructions over the frame complete all asspecified and directed |
| 45 | M&L forUPVC Coated Celuka printedin one of two different colours ( with wood grain printed pattern/ivory clour finish) polyvinyl chloride (PVC) sheetframe of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet andjoined with suitable Cement Solvent adhesive and screw.Theframe shall be fixed to the wall using 75mm long S.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, all as per manufracturers specifications, complete all as specified and as directed. |
| 46 | M&L for 18 mm thick solid PVC sheetUPVC Caoted Celuka printedin one of two different colours ( with wood grain printed pattern/ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed . |
| 47 | S&F 30 mm width ofFI continious pianohinges, stainlesssteel, complete assembly complete all as specified and directed. |
| 48 | Extra over solid PVC sheet for fixing 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails, complete all as specified and as directed. |
| 49 | S&F \"0\" degree clip type self closing hinges for cabinets fixed with cadimum coated screws, complete all as specified and as directed. |
| 50 | S&F 75mm size bright finished cromium plated brass handleof approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers |
| 51 | S&F magnetic catchesfor cabinets of size 50 mm complete with striking plate & magnetic stud complete all as specified and as directed. |
| 52 | S&F drawer runners folding typewith guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawerscomplete all as specified and as directed.. |
| 53 | M&L for stainless steel tray as per trade patternof various sizes for drawer to keep the kitchen utensil complete all as specified and as directed. |
| 54 | Dismantling ofstone/marble slabs of any description or thickness as in floors/ cooking platform/steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed |
| 55 | M&L 16-18mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plate forunning Metre /cooking plate foRunning Metre , steps, jambs,pillars, window cills, , shelves, urinal partitionand like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement(1:2)using marble dust with admiture of pigmentto matchwith shade of granite stone slab including moulding of edges and cutting as required including cleaning and extra polishing if required complete all as specified and as directed. |
| 56 | Dismantling of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area at any distance upto 500 metres from the site complete all as specified and as directed. |
| 57 | M&L for joint free non skid ceramic coloured tiles (premium quality) of size of tile n. exceeding 0.11 Square Metre 6 to 7 mm thick, as infloors etc set and jointed in neat cementslurry and pointed in white or coloured cementto match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6complete all as specified and as directed. |
| 58 | M&L forglazed colour ceramic tiles (premium quality) of size300mmX450mmX6-7 mm, as in vertical surface such as i.e. dado/skirtingetc, set and jointed in neat cement slurry and pointed in white or colouredcement to match the shade of tiles,over & including M&L 10mm thick backing coat in CM (1:3)complete all as specified and directed. |
| 59 | M&L forglazed colour ceramic tiles (premium quality) of size300mmX600mm 6-7 mm thick , as in vertical surface such as i.e. dado/skirtingetc, set and jointed in neat cement slurry and pointed in white or colouredcement to match the shade of tiles,over & including M&L 10mm thick backing coat in CM (1:3)complete all as specified and directed. |
| 60 | M&L for light shade vitrified ceramic tiles, double charged 9-10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 Square Metre,(size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 61 | All as per item No. 60.00 here-in-above, but as in skirting / dado/ verticle surfaces, over & including M&L 10 mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 62 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed |
| 63 | M&L for rendering / plastering 15mm thick in cement mortar (1:4) on any face of stone walls or concrete surfaces (external surface), finished even and smooth without using extra cement, complete all as specified and as directed. |
| 64 | M&L for 15 mm thick rendering in CM 1:6on stone masonry surfaces or surface other than fair face of stone walls or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.Note -Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. |
| 65 | M&L Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over & including M&L single coat of chalk white complete all as specified and as directed. |
| 66 | M&L for preparation of old decorated wall surfacesplastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots,including cornices etc andapplying two coats of cement base paint on wall, complete all as specified and directed. |
| 67 | M&L for preparation of new plastered/ concrete surface of wall / Pillars / cornices and applying 1.5mm - 2.5mm thick one coat of cement based wall care putty to complete surface of wall to make the surface even and smooth by using sander machine (With provision of dust sucking) upto entire satisfaction of Engineer-in-Charge and applyingtwo coats of interior oil emulsion paint(with roller brush )complete all as specified and as directed. |
| 68 | M&L for preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 69 | NOTE:- (i)-The contract sum shall be arrived at after duducting amount of schedule of \"Credit\" from the Total quoted amount |
