|
| 1 | Demolition of Brickwork or stone/ boulder masonry/PCC block masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed by Engineer-in-charge. |
| 2 | M &L Squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built inCM 1:6 complete all as specified and directed by Engineer-in-charge. |
| 3 | Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm & dressing face bedsand joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified and directed by Engineer-in-charge. |
| 4 | M & L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto coursein cement mortar 1:4 complete all as specified and directed by Engineer-in-charge. |
| 5 | M &L Pre-cast cementconcrete block type C1 1:3:6 20mm graded masonrywith solid blocks, exc. 10 cm in width and setting in cementmortar 1:6 including demolition of PCC block masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed by Engineer-in-charge. |
| 6 | Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engineer-in-charge. |
| 7 | Supplying and fixing Jaisalmer stone Jali 40mm wirh pillar 100x100x70thick fully finedressed carved upto full depth with ornamental cut stone work complete all as specified and directed by Engineer-in-charge. |
| 8 | M & L providing bottom runner stone beam (Jaisalmer type) fixed in line having size 100 x 200 MM fixed in cement mortar 1:4 and making ready for fixing of jaisalmer stone jalies and pillar complete all as specified and directed by Engineer-in-charge. |
| 9 | M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 including dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engineer-in-charge. |
| 10 | M&L Providing type B1 (1:2:4) (20mm graded aggregate) precast ce- ment concrete in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings.kneelers, apex stones, pier caps,columns, posts, boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), withplain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match and set in CM 1:4 complete all as specified and directed by Engineer-in-charge. |
| 11 | M&L for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant paint complete all as specified and directed by Engineer-in-charge. |
| 12 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-charge. |
| 13 | Dubbing out average 10mm thick on irregularface of walls CM 1:4 complete all as specified and directed by Engineer-in-charge. |
| 14 | M&L for rendering 10-15 mm thick readymade plaster on inner/outer walls with approved make by adding 17-19% of potable water by weight of material. For thickness above 15mm is recommended to be applied in multiple layers, Ready-mix plaster shall complies with IS-1661-1972, IS 2250-1965, IS 2402-1963 and confirms the compressive strength @ 28 Days-10-12 Mpa/ Bulk density 1500-1800 Kg/m3 complete all as specified and directed by Engineer-in-charge. Note : The quoted rate by the contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20 mtr height. |
| 15 | M&L for preparation of newly plastered surfaces and applying Material & Labour for applying Two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer-in-charge. |
| 16 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-charge. |
| 17 | Demolition of Concrete in ground floors and pavings exc 15 cm thickness but above ground level) complete all as specified and directed by Engineer-in-charge. |
| 18 | M&L for 75 mm thickCement concrete 1:4:8 Type D2 using 40mm graded stone aggregate as in flooring or mass concrete complete all as specified and directed by Engineer-in-charge. |
| 19 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-charge. |
| 20 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-charge. |
| 21 | M & L for chequered cement concrete tiles 30cm x 30cm x 25mm thick,rubber moulded set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6for laying floor finishes complete all as specified and directed by Engineer-in-charge. |
| 22 | Material & Labour for ceramic out door tiles 300mmx300mmx10mmm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 15 mm thick Cement Mortar 1:6 complete all as specified and directed by Engineer-in-charge. |
