|
| 1 | Item Description |
| 2 | Executive Table : Dimensions: 1800W X900D X750H in mmTable Top shall be made of 25mm thick pre-laminated particle board with both side laminate approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping.Modesty Panel-Made of 18 mm thick pre laminated particle board Interior Grade with BSL laminate board Confirming to IS-12823:1990 with 2 mm thick PVC edge banding in approved shade. Gable End Made of 25 mm thick pre-laminated particle board of Interior grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. Metal leveller shall be provided at the bottom of under structure to adjust the uneven floor level up to 5-10 mm. Table Shall Have Both Side Storage with the Configuration of BBB+File. The pedestal units shall be made out of 18 mm thick prelaminated particle board of Interior Grade for Body shell, Drawer Facia and Back of Storage in approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Storage shall come with Locking Facility. All the drawer should be slide with s drawer double telescopic channel. Handles are provided for ease of opening. Drawers shall have centralized locking system to lock the entire drawer. |
| 3 | Supervisor Table : Dimensions: 1500W X750D X750H in mmTable Top shall be made of 25mm thick pre-laminated particle board with both side laminate approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping.Modesty Panel-Made of 18 mm thick pre laminated particle board Interior Grade with BSL laminate board Confirming to IS- 12823:1990 with 2 mm thick PVC edge banding in approved shade. Gable End-Made of 25 mm thick pre-laminated particle board of Interior grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. Metal leveller shall be provided at the bottom of under structure to adjust the uneven floor level up to 5-10 mm. Table Shall Have Both Side Storage with the Configuration of BBB (Box- Box- Box-)+BF (Box-File). The pedestal units shall be made out of 18 mm thick prelaminated particle board of Interior Grade for Body shell, Drawer Facia and Back of Storage in approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Storage shall come with Locking Facility. All the drawer should be slide with s drawer double telescopic channel. Handles are provided for ease of opening. Drawers shall have centralized locking system to lock the entire drawer. |
| 4 | Clerk Table : Dimensions: 1200W X 600D X 750H in mmTable Top shall be made of 25mm thick pre-laminated particle board of Interior grade with both side laminate approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. Modesty Panel-Made of 18 mm thick pre laminated particle board Interior Grade with BSL laminate board Confirming to IS-12823:1990 with 2 mm thick PVC edge banding in approved shade.Gable End-Made of 25mm thick pre-laminated particle board of Interior grade and approved shade confirming to IS-12823:1990,edge banded with matching 2 mm thick PVC lipping. Metal leveller shall be provided at the bottom of under structure to adjust the uneven floor level up to 5-10 mm.Storage- Storage units shall be made out of 18 mm thick prelaminated particle board of Interior Grade for Body shell, Drawer Facia and Back of Storage in approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. The Pedestal construction is BOX-BOX-Box type. All the drawer should be slide with s drawer double telescopic channel. Storage shall have centralized locking system to lock the entire pedestal with lockable Castors mounted below the body shell for Free Standing Pedestal. |
| 5 | Computer Table (Wooden) : 1. Dimensions : 1200W X 600D X 750H in mm2. Table Top : Material : 25 mm thick pre-laminated particle board of Interior Grade. Finish: Both sides laminated in an approved shade conforming to IS-12823:1990. Edging: 2 mm thick PVC edge banding with a matching colour. 3. Modesty Panel : Material : 18 mm thick pre-laminated particle board of Interior Grade. Finish : Both sides laminated, conforming to IS-12823:1990. Edging : 2 mm thick PVC edge banding in an approved shade.4. Under structure : Material : 25 mm thick pre-laminated particle board of Interior Grade, conforming to IS-12823:1990. Edging : 2 mm thick PVC edge banding with a matching colour. Features : Equipped with metal levellers at the bottom to adjust uneven floor levels (5–10 mm).- Grommet : Provided on the table top for cable management.- Storage Configuration :- Type : Top-supported storage with BBF Configuration (Box-Box-File).- Central Locking Facility : Ensures all drawers can be locked simultaneously.- Channels : Heavy- duty telescopic channels for smooth and reliable operation.- Handles : Stainless Steel (SS) handles for easy opening. |
| 6 | Executive Chair (High Back) : Material & Cushioning:Back: MeshSeat: High-quality PU foam cushion upholstered with high-quality Leatherette.Mechanism- Bio Synchro Mechanism with 3 Position Locking. Armrest: 3 D Adjustable Armrest with Soft PU Padded.Lumbar Support- • Adjustable for extra comfort• Polypropylene pad with molded polyurethane foam, covered with fabric• Height adjustment: 30mmSeat- • Made of 12 mm thick hot-pressed ply• High-density molded foam (45-50Kg/Cu M)• Thickness: 50 mm• Upholstered with high-quality Leatherette.Pivot Adjustable Headrest with Cushion and Leatherette Upholstery.Seat size- 480Wx490D (in mm)Back Size-480Wx660Ht. (in mm)BIFMA Class 3 Gas lift with 120 mm Height Adjustment.Base & Casters: • Twin-wheel caster star base with PCD Ø 700• 5 casters, Ø 50mm, made of nylonOverall Dimensions: 700W x 730D x 1190/1310H mm |
| 7 | Executive Chair (Medium Back) : Chair Type: Mid Back Mesh Revolving Office ChairMaterial & Cushioning:Back: Mesh with Adjustable Lumber SupportSeat: High-quality PU foam cushion upholstered with high-quality Fabric.Mechanism- Bio Synchro Mechanism with 4 Position Locking. Armrest: - 2 D Adjustable Armrest with Soft PU Padded.Lumbar Support-- Adjustable for extra comfort- Polypropylene pad with molded polyurethane foam, covered with fabric- Height adjustment: 30mmSeat- Made of 12mm thick hot-pressed ply, - High-density molded foam (45-50Kg/Cu M), - Thickness: 50mm, - Upholstered with high-quality Fabric.Seat size- 480Wx490D (in mm)Back Size-480Wx660Ht. (in mm)BIFMA Class 3 Gas lift with 100 mm Height Adjustment.Base & Casters:- Twin-wheel caster star base with PCD Ø 660- 5 casters, Ø 50mm, made of nylonOverall Dimensions: 660W x 660D x 950/1050H mm |
| 8 | Office Chair : Chair Type: Mid Back Revolving Office ChairMaterial & Cushioning:Back: MS Tube (Dia 16x1.6 mm) with Cushion and Quilting. Seat: High-quality PU foam cushion upholstered with high-quality Fabric.Armrest:- Fixed PP Padded.Upright Locking Mechanism.Seat-- Made of 12mm thick hot-pressed ply- High-density molded foam (45-50Kg/Cu M)- Thickness: 50mm- Upholstered with high-quality Fabric.Seat size- 500Wx505D (in mm)Back Size-480Wx585Ht. (in mm)BIFMA Class 3 Gas lift with 100 mm Height Adjustment.Base & Casters:- Twin-wheel caster star base with PCD Ø 610- 5 casters, Ø 50mm, made of nylonOverall Dimensions: 630W x 630D x 945/1045H mm |
| 9 | Visitor Chair : Chair Type: Visitor Executive Office ChairMaterial & Cushioning:Back: MeshSeat: High-quality PU foam cushion upholstered with high-quality Leatherette.Armrest:- Fixed PP Armrest.Lumbar Support-- Adjustable for extra comfort- Polypropylene pad with molded polyurethane foam, covered with fabric- Height adjustment: 30mmSeat-- Made of 12mm thick hot-pressed ply- High-density molded foam (45-50Kg/Cu M)- Thickness: 50mm- Upholstered with high-quality Leatherette. Seat size- 480Wx490D (in mm)Back Size-480Wx600Ht. (in mm)Under Structure- MS Tube with the Size of Dia 22x3 mm with Powder coated (50-60 Micron) Overall Dimensions: 600W x 605 x 1020 H mm |
| 10 | Plastic Moulded Chair : *Durable Plastic Body : The premium virgin plastic material on the arm chair provides superior durability and a light weight design for portability and long-lasting use.*Comfortable Design : The ergonomic construction of the chair with supportive arm rests and 125 kg load-bearing capacity keeps you comfortable while sitting, even for extended hours.*Contemporary Style : An aesthetic design with patterns offers an appealing touch to your chair, making your room feel morecomfortable and welcoming.*Glossy Finish: The elegant marble beige colour combines with a gloss finish to further accent the appeal of the chairs, making it a stylish complement to the decor.Dimension: - Width (cm) 570 X Depth 600 X Height 900 in mm |
| 11 | Wooden Chair : Chair shall made up of Rubber wood or Wooden with Natural finish. The chair can be provided with fixed wooden armrests. Chair shall come with 4 wooden Legs. The dimensions of back shall be 49 cm(W) X 60 cm (H) and of seat shall be 49 cm(W) X 48 cm(D). Seat Height - 43 cm, Height 85 cm, Width & Depth of Chair as measured from base - Width & Depth of Chair as measured from base – Width 60.0cm and Depth-56 cm. |
| 12 | Tablet Chair : Seat and Back :- Made of high-impact strength polypropylene polymer compound.- The backrest has perforations for better back support and ventilation.- Seat size : 464 mm (W) x 424 mm (D).- Back size: 464 mm (W) x 335 mm(H).Foam and Upholstery :- Seat has 25 mm thick moulded PU foam.- Upholstered with fabric for comfort.Armrest : Fixed PU-padded armrest with dimensions : 228 mm(L) x 68 mm(D). Chair Structure :- Constructed from MS ERW tube (oblong section). The chair has 4 legs for better stability with a size of 30 x 15 x 1.2 mm thickness. All metal parts are powder-coated with a thickness of 50-80 microns.Plywood and Tablet :- Features 18mm thick post-laminated plywood conforming to IS 303 standards. 2 mm thick PVC edge banding for durability.- Tablet size : 611 mm(W) x 380 mm(D) x 18 mm (thick).Overall Dimensions : 580 mm(W) x 565 mm(D) x 800 mm(H). |
| 13 | Steel Sliding Door Cupboard (Major) : Providing and Placing in position rigid knock down construction Metal Storage Unit- top, bottom & shelves made of 0.80 mm thick CRCA \"D\" Grade & sides, back & door made of CRCA \"D\" Grade as per IS -513. The cabinet shall have top sliding door. Each door shall be provided with 2 plastic roller having steel ball bearing with die cast lever cam lock, push flush & recessed handle. The cabinet shall have one adjustment full shelve. Entire unit shall be finished with 50 micron thick epoxy polyester powder coating. Storage shall have 4 Level of Adjustable Shelf complete as per manufacturer’s specification and direction of Engineer - in- charge.Dimension-900Wx450Dx1800Ht. (in mm) |
| 14 | Steel Sliding Door Cupboard (Minor) : Providing and Placing in position rigid knock down construction Metal Storage Unit- top, bottom & shelves made of 0.80 mm thick CRCA \"D\" Grade & sides, back & door made of CRCA \"D\" Grade as per IS -513. The cabinet shall have top sliding door. Each door shall be provided with 2 plastic roller having steel ball bearing with die cast lever cam lock, push flush & recessed handle. The cabinet shall have one adjustment full shelve. Entire unit shall be finished with 50 micron thick epoxy polyester powder coating. Storage shall have 2 Level of Adjustable Shelf complete as per manufacturer’s specification and direction of Engineer - in- charge.Dimension-900Wx450Dx1200Ht. (in mm) |
| 15 | Book Case : Providing and Placing in position rigid knock down construction Metal Glass Door Storage Unit- top, bottom & shelves made of 0.80 mm thick CRCA \"D\" Grade & sides, back & door made of CRCA \"D\" Grade as per IS -513. The cabinet shall have top sliding Glass door.Each door shall be provided with 2 plastic roller having steel ball bearing with die cast lever cam lock, push flush & recessed handle. The cabinet shall have one adjustment full shelve. Entire unit shall be finished with 50 micron thick epoxy polyester powder coating.Storage shall have 4 Level of Adjustable Shelf complete as per manufacturer’s specification and direction of Engineer - incharge.Dimension-900Wx450Dx1800Ht. (in mm) |
| 16 | Library Glass Door : Material and Construction :- Body and Doors :- Made of 0.8 mm and 0.6 mm CRCA (Cold Rolled Close Annealed) steel, conforming to Grade D.- Constructed using22-gauge thickness for both the body and doors.- Doors include 4 mm thick clear glass, offering visibility and a sleek design.- Shelves :- 4 height-adjustable shelves for flexible storage configurations.- Each shelf can support a load of 60-70 kg (Uniformly Distributed Load-UDL).Finish and Coating:- Epoxy Powder Coating :- Finished with an epoxy powder coating with a thickness of 50 microns(+/-10 microns) for durability and resistance to corrosion.Handle and Locking Mechanism :- Handle:- Aesthetically appealing and ergonomic design.- Made of metal with achrome finish, ensuring long-lasting quality.- Locking Mechanism :- Equipped with a 3-way locking system for secure storage.Dimensions : Size : 900 mm (W) x 510 mm (D) x 1970 mm (H) in mm |
| 17 | Lockers (9 Door) : Providing, assembling & placing in position 9 Door Modular Personal Locker storage unit as per below specification- The Rigid knock down construction of storage unit shall be made of Combination of 0.8 mm and 0.6 mm thick CRAC Sheet with 50-60 microns epoxy powder coated in approved shade. Door Facia shall be made of 0.8 mm thick and Body Shall be made of 0.6 mm thick CRCA Sheet with 50–60-micron epoxy Powder coated. Storage shall have ABS Plastic Handle. Storage shall have Cam locking facility and Label Holder shall be aesthetically appealing snap fit. Ventilation shall be attractive punched pattern for ventilation. Shelf shall be made of 0.8mm thick CRCA Sheet with approved shade of powder coating and Load Carrying Capacity of each shelf shall be 35-40 kg. Storage shall have leveler at the bottom, to adjust level of 5-10 mm.The Overall dimension of storage is 900 W x 450 D x 1800 Ht. |
| 18 | Lockers (6 Door) : Providing, assembling & placing in position 6 Door Modular Personal Locker storage unit as per below specification-The Rigid knock down construction of storage unit shall be made of Combination of 0.8 mm and 0.6 mm thick CRAC Sheet with 50-60 microns epoxy powder coated in approved shade. Door Facia shall be made of 0.8 mm thick and Body Shall be made of 0.6 mm thick CRCA Sheet with 50–60-micron epoxy Powder coated. Storage shall have ABS Plastic Handle. Storage shall have Cam locking facility and Label Holder shall be aesthetically appealing snap fit. Ventilation shall be attractive punched pattern for ventilation. Shelf shall be made of 0.8 mm thick CRCA Sheet with approved shade of powder coating and Load Carrying Capacity of each shelf shall be 35-40 kg. Storage shall have leveler at the bottom, to adjust level of 5-10 mm.The Overall dimension of storage is 900 W x 450 D x 1800 Ht. |
| 19 | File Cabinet (Vertical) : Providing, assembling & placing / fixing in position modular Filing Cabinet as per details-Vertical Filing Cabinets which use less floor space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D) in mm. All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10 ). |
| 20 | Steel Rack- Closed (8 Shelves) : Supplying and placing in Position of 3 Side Closed Rack unit with the Overall Dimension of 900 W x 450 D x 2400 Ht in mm. The Entire Storage Unit Come with Rigid Knock Down Construction, Material used shall be 0.8 mm thick CRCA sheet Confirming to Grade D with 60 –70 -micron Powder Coating. Rack should be closed with 3 side. The Vertical beam of rack shall made of 40 x 40 x 2 mm thick MS Angle as per IS 10748. Each Rack shall have 08 level of Adjustable shelves having 08 Compartment. The Angle of Rack shall be of rolled formed construction and free from twist, sharp edges and Burrs. Racks shall have Hole towards Height Wise for adjustability of Shelves at different levels. The Stack ability shall be addon units can be stacked width wise to form a bank of racks having Common side panels. Rack shall have adjustable Shelves, which is made of 0.8 mm thick CRCA Sheet in approved shade of Powder Coating. The Uniform Load Bearing capacity of each rack shall be 80 Kg Maximum. Shelf back Stiffener at the rear end of the shelves shall be provided. Label Holder shall be provided at each level. |
| 21 | Steel Rack- Closed (6 Shelves) : Supplying and placing in Position of 3 Side Closed Rack unit with the Overall Dimension of 900 W x 450 D x 2100 Ht in mm. The Entire Storage Unit Come with Rigid Knock Down Construction, Material used shall be 0.8 mm thick CRCA sheet Confirming to Grade D with 60 –70 -micron Powder Coating. Rack should be closed with 3 side. The Vertical beam of rack shall made of 40 x 40 x 2 mm thick MS Angle as per IS 10748. Each Rack shall have 06 level of Adjustable shelves having 06 Compartment. The Angle of Rack shall be of rolled formed construction and free from twist, sharp edges and Burrs. Racks shall have Hole towards Height Wise for adjustability of Shelves at different levels. The Stack ability shall be addon units can be stacked width wise to form a bank of racks having Common side panels. Rack shall have adjustable Shelves, which is made of 0.8 mm thick CRCA Sheet in approved shade of Powder Coating. The Uniform Load Bearing capacity of each rack shall be 80 Kg Maximum. Shelf back Stiffener at the rear end of the shelves shall be provided. Label Holder shall be provided at each level. |
| 22 | Steel Rack- Closed (5 Shelves) : Supplying and placing in Position of 3 Side Closed Heavy Duty Shelving Rack unit of Supplying and placing in Position of 3 Side Closed Rack unit with the Overall Dimension of 900 W x 450 D x 2400 Ht in mm. The Entire Storage Unit Come with Rigid Knock Down Construction, Material used shall be 0.8 mm thick CRCA sheet Confirming to Grade D with 60 –70 -micron Powder Coating. Rack should be closed with 3 side. The Vertical beam of rack shall made of 40 x 40 x 2.5 mm thick MS Angle as per IS 10748. Each Rack shall have 05 level of Adjustable shelves having 05 Compartment. The Angle of Rack shall be of rolled formed construction and free from twist, sharp edges and Burrs. Racks shall have Hole towards Height Wise for adjustability of Shelves at different levels. The Stack ability shall be addon units can be stacked width wise to form a bank of racks having Common side panels. Rack shall have adjustable Shelves, which is made of 0.8 mm thick CRCA Sheet in approved shade of Powder Coating. The Uniform Load Bearing capacity of each rack shall be 120 Kg Maximum. Shelf back Stiffener at the rear end of the shelves shall be provided. Label Holder shall be provided at each level. |
| 23 | Bench (Stainless Steel) : Supply and Installation of SS Bench as per below Specifications- Visitor Bench without Armrest & Backrest, Comes with Cross beam shall be made up of High-quality Stainless-Steel sheet Grade-202 is pressed and welded to form the shape and the surface is polished with Thickness of 1.5mm. Leg shall High-quality Stainless-Steel tube/ sheet (SS-202 Grade) is welded to form the shape for footrest.The surface is polished to perfection with Thickness of 1.0mm. The bench shall be Stainless Steel Grade 202. Overall Dimension -1800 W x 400 D x 450 HT in mm |
| 24 | Stool (Stainless Steel) : Providing, assembling, transporting & placing/fixing Stools as per below specificationsDimensions: 360mm (L) * 360mm (W) * 510mm (H)Sturdy Construction: - Stainless Steel Top Fabricated from 20gm CRCA Sheet for Long-Lasting Durability. - Legs Constructed using 25mm * 25 mm Square Pipe, Strengthened with High-Quality PVC Shoes for Stability. |
| 25 | Waiting Chair (3 Seater) : Material & Build :1. Seat and Back :- Made from injection molded high-impact strength polypropylene polymer compound.- Designed with indoor grade UV resistance to prevent degradation from light exposure. The seat and back are molded to provide strength and durability for long-term use.2. Frame & Structure :- Welded Tubular Frame : Made from HR Steel Plate, welded to a beam for securely fixing the seat and back frame.- Powder Coating : The frame is powder-coated with DFT 50 ± 10 microns for a smooth, durable finish.- Legs : Constructed from MS ERW Tube with a high-quality powder coating in an approved shade for corrosion resistance.- Footwear / Shoes : Made of high-impact strength polypropylene polymer compound with indoor grade UV resistance, pressed and fitted on to the tubular frame for stability.- Handles : Handles are provided on every side for enhanced support and ease of movement.Dimensions : Overall Size : 174.1 W X 61.5D X 85.1H in cmSeat Height : 46.5 in cm Seat Size : Width : 45.0cm X Depth : 54.2 cm Back Size: Width : 45.0cm X Height :48.0 cm |
| 26 | White Board (Non-Magnetic) : Providing, assembling, transporting & placing/fixing White Board as per below specificationsSemi Gloss White Finish for Smooth Writing Surface ABS Caps at Corner for enhanced Safety Easy Wall Mounting.Light Weight Dimension:- 1100WX900H X 22.5mmT in mm |
| 27 | Notice Board : Providing, assembling, transporting & placing/fixing Notice Board as per below specificationsDurable Construction to withstand repeated use ABS Caps at Corner for enhanced Safety , Easy Wall Mounting. Strong and Elegant looking design, Anodized Aluminium Frame with Smooth Sliding doors, 5 mm Toughened Glass Sliding Doors Comes with Sliding door key lock. Rounded Edges for safety. Notice board with fabric, colour as per requirement.Light Weight Dimension 1200W X 600H X 30 mm T |
| 28 | Table Glass : i) 8 mm thick Plain Clear Glass. Dimension-1800x900x8 mm |
| 29 | Table Glass : ii) 8 mm thick Plain Clear Glass. Dimension-1500x750x8 mm |
| 30 | Table Glass : iii) 8 mm thick Plain Clear Glass. Dimension-1200x600x8 mm |
| 31 | Cash Box : Providing, assembling, transporting & placing/fixing of Cash Box with Coin Tray as per below specifications- Cash Box with Coin Tray Material type -Heavy Duty Powder Coated steel Single Plate Multi-Bend Construction KEY LOCK: Cash box has a privacy key lock to keep valuables safe; Easy to use: It is so easy to open and close the money box with one hand. Cover on Coin Tray: Five compartment coin tray with a sturdy cover keeps your coins from falling out; Underneath is a small compartment for additional bills, notes, receipts, etc to be stored safely out of sight. Spring Clips: Four strong spring clips help to organize paper bills and checks in their place anywhere even in a windy outdoor environment. Secure & Safe: Cash box has a security slot for using a computer cable lock(not include cable lock); Perfect cash Boxes for indoor and outdoor use, Such as School, Supermarket, Storage Lockers, sales booths, yard sales, farmer’s market, Family and so on.DURABLE: Cash box with money tray is made of reliable, heavy-duty powder-coated steel; Exterior dimensions: 11.8\"L x 9.5\"W. |
| 32 | Safe Security Locker Box (Office Tijori) : Material and Construction :- Body and Door :- Steel Body : 1.5 mm thick steel construction for durability.- Reinforced Door : 4 mm thick steel door for enhanced security.Capacity and Storage :- Capacity : 56 liters, providing ample storage space.- Adjustable Shelf : Allows for flexible organization of items like cash, jewelry, documents, etc.Security Features :- Electronic Keypad :- Supports 3-8 digit master and user passwords with over 100,000 combinations, ensuring high security.- Comes with an emergency lock and keys for backup access.Dimensions : Size: 350 mm (W) x 300 mm (D) x 500 mm (H) |
| 33 | Acrylic Table Top Stand : Providing, assembling, transporting & placing / fixing Acrylic writing desk as per below specificationsRasper Acrylic Writing Desk Clear Acrylic Table Top Elevator With Adjustable Height Slant Book Reading Stand Office Table Top–charge.Size - 60W x 45D x 1.6H CM |
| 34 | Foot Rest : Footrest DURABLE DESIGN- Crafted from high-impact Polystyrene for long-lasting support.- CUSTOMIZABLE ANGLE – Find your perfect tilt with adjustable settings from 0°to20°.- Size – 450 mm x 350 mm |
| 35 | Stainless Steel Utility Trolley : Material and Construction :- Shelves and Top :- Made from high-quality SS 202 grade material for excellent durability, corrosion resistance, and hygiene.- Frame : - Sturdy tubular frame constructed from 25 mm x 18 SWG 202-grade stainless steel, ensuring long-lasting performance.Features : - Two Tiers :- Two spacious shelves for efficient storage and transportation.- SS Railing :- All-sided stainless steel railing on both top and bottom shelves for added security of items during movement.High Depth : Designed with increased depth to accommodate larger storage capacity.- Mobility:- Castor Wheels :- Equipped with 125 mm diameter castor wheels for smooth movement.- Dimensions: - Upper Shelf : 28” (L) × 22” (W) × 11” (D), - Lower Shelf : 28” (L) × 22” (W) × 11” (D), • Distance between shelves : 11 inches • Overall Height : 27 inches (including frame) • Wheel Height : 4 inches |
| 36 | Ladder : Providing, assembling, transporting & placing /fixing 5 Step Ladder as per below specificationsLadder(With Platform, Hand Rail)• Product Dimensions : 457W x 830D x 1390H in mm• Primary Material : Metal• Can be easily folded and kept a side when not in use, thus saving space Please Enable Macros to View BoQ information |
