|
| 1 | Demolition of cement concrete (unreinforced) in ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete allas specified and removal of rubbish off the site |
| 2 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons lete laid dry or laid dry and pointed etc complete all as specified and removal of rubbish off the site |
| 3 | Material and Labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment complete all as specified |
| 4 | Ditto as per serial item No 03 as described here-in-before but except tiles complete all as specified |
| 5 | Material and Labour for PCC (1:4:8) type D-2(using 40mm graded stone aggregate) as in sub base of flooring 75 mm thick finished even and rough complete allas specified |
| 6 | Material and Labour for laying silver sand filling under floors or in foundations including watering and consolidation complete all as specified |
| 7 | Material and Labour for pre-polished cement concrete designed coloured pavement tiles glossy finish of size not less than 400 x 400 x 20mm thick or equivalent size as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified |
| 8 | M&L for hard core of gauge n.exc 63mm,deposited spread and levelled in layer n exc 15cm thick watered and rammed to a true surface of broken stone boulders to fill dipressions/pot holes and bring to proper level and gradient etc complete all as specified. |
| 9 | Demolition of cement concrete (reinforced) as in cover slab, RCC cover and like etc. complete all as specified |
| 10 | Material and labour for providing precast reinforced cement concrete (1:1.5:3) type A-1(using 20mm graded stone aggregate) as in cover slabs (for manholes etc) and like set in cement mortar (1:4) including necessary formwork complete all as specified Note: Reinforcement shall be measured and paid for separately. |
| 11 | M&L for 8 mm dia and over TMT bars, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified |
| 12 | M&L for precast cement concrete (1:2:4) type B0(using 12.5mm graded stone aggregates) as in louvres and jallies, 25mm thick (measured solid), including all mouldings etc complete all as specified |
| 13 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc. of any descriptions complete allas specified and removal of rubbish off the site |
| 14 | Material and Labour for brick work with sub class \"B\" brick straight of curved on plan exc 6m mean radius built in CM (1:6) complete allas specified |
| 15 | Ditto as per serial Item No 14 described here-in-before but except brick etc complete all as specified Note : Old biricks retrieval against the relevant item shall be reused after necessary cleaning. |
| 16 | Material and Labour for Brick work with sub class B old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete allas specified |
| 17 | Material and Labour for Providing plain cement concrete (1:2:4) type B1(using 20mm graded stone aggregate) as in coping and the like including weathering, slightly rounded or chamferred angles and throating as complete allas specified |
| 18 | Material and Labour for 100mm thick plain Cement concrete (1:2:4) type B- 2, (using 40mm graded stone aggregate) as in floor, hard standing and like complete all as speficied |
| 19 | M&L forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’for 100mm thick concrete complete all as speficied |
| 20 | Material and Labour for 75mm thick PCC (1:3:6), type C2, (using 40mm graded stone aggregate) as in plinth protection / paving, surfae finished even & smooth without using extra cement as complete allas specified |
| 21 | S&F in repairs hollow PVC Wall panneling with designed/printed panels having wide of 300mm including necessary caping/fillets at top, bottom and junctions/corners of wall where ever required as per site etc complete all asspecified |
| 22 | Material and labour for Granite slab (of any type) 16 to 18 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms laid over and including over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade granite etc complete all as specified |
| 23 | Dismantling of plain or corrugated aesbestos sheet any gauge, thickness in roof coverings complete all as specified and removal of off the site |
| 24 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 25 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 580m per as in ridges, Valley gutter, drip and straight to flashing (length and, fixed girth as fixed) with self tapping screws all as specified |
| 26 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specfied and removal of off the site |
| 27 | M&Lmild steel Steel work of MS Square/round pipe or angles, Tee etc as in purlin, rafter, post and trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specfied |
| 28 | Taking down cement plaster or lime plaster of any description from stone or brick wall/ ceiling etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD landincluding necessary working platform complete allas specified |
| 29 | Material and Labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick walls or concrete surface, finishing even and smooth (without using extra cement)etc including necessary working platform complete allas specified |
| 30 | Materials and labourfor 15 mm thick renderingon fair faces of brick work in cement mortar (1:6) andfinished the surfaceseven and smooth without using extra cement complete all as specified |
| 31 | Material and Labour for preparation of new plastered surfaces of wallsandapplying three coats of white washcomplete allas specified |
| 32 | M&L for preparation on new plastered surfaces of wall and applying two coats ofexterior acrylic emulsion paint over a coat of primercomplete all as specified |
| 33 | M&L forPreparation of old plastered surfaces and applying one coat of exterior acrylic emulsion paint complete all as specified |
| 34 | M&L preparating of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described,and applying of two coats of synthetic enamel paint over one coat of red oxide, zinc chromic complete all as specified |
| 35 | Material and Labour for one coat of synthetic enamel paint including preparation on oldsteel surfaces ofany description over 10 cm width or girth complete allas specified |
| 36 | M&L for ground level factory made kerb stone of M-25 grade cement concrete ( size 300mm x 450mm x 100mm) in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified |
| 37 | M&L for preparation of new concrete surfaces over 10cm in width or girth, not otherwise describedand applying two coats of synthetic enamel paint over a coat of primercomplete all as specified |
