|
| 1 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area n. exc. 1.5sqm each, complete all as specified and as directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area exc 1.5sqm but n. exc. 4.0 sqm each, complete all as specified and as directed. |
| 3 | Taking down shutters of any description of area n exc 1sqm each, complete all as specified and as directed. |
| 4 | Taking down shutters of any description of area exc 1sqm but not exc 2sqm each, complete all as specified and as directed. |
| 5 | M&L forSecondclass hard woodplain solid straight chowkhat andframes, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and as directed |
| 6 | M&L forFactory made2nd class hard woodplain, framed, panelleddoor shutter 35mm thick, twopanels with lock rail and panels of 12mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a) and fitted to Chowkats,complete all as specified and as directed. |
| 7 | M&L for Factory made 2nd class hard woodGlazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain, chamfered or rounded, mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 8 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window Frame/ Chowkhat of size 45mm x 70mm with virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibbers (wood powder/ rice husk/ wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) with mitre joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant, and fixed in position with andincluding MS hold fast/lugs/SS dash fasteners as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 9 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension rade), calcium carbonate and natural fibbers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant, complete all as directed by Engineer-in-Charge. |
| 10 | S&F Factory made powder coated aluminium sliding type window (Triple Track type), fabricated to required size with standard aluminium sections with bottom track of size 92x31.75x1.6mm, side & top frame 92x31.75x1.4mm, top & bottom shutter rail with 39x17x1.4mm, outer style of size 39x17x1.4mm, interlock style of size 39x27x1.4mm of approved make according to IS (thickness of powder coating not less than 50 micron) including necessary glazing clips, with and including 4mm thick sheet frosted glass for two shutters fixed with rubber gasket and SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for wire mesh shutter fixed with aluminium beading, anodised aluminium fitting/fixture such as required number of rollers of suitable size, interlocking cleats/plates etc as required, complete all as specified and directed by the Engineer-in-Charge. Note : Quoted rate shall be inclusive of frame, shutter, sheet frosted glass, SS wire mesh and hardware such as butt hinges, tower bolts, handles, locking arrangement etc, complete as required at site. |
| 11 | S&F Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165, with and including dismantling existing wrought iron or mild steel work of any description, complete all as specified and as directed. |
| 12 | S&F Mild steel, plain, black sheet 1.6mm thick, as in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc., complete all as specified. |
| 13 | M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 14 | M&L for Preparation of new steel surfaces of any descriptionover 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 15 | S&F MS butt hingescold rolled medium weight 125mm size, ISI marked, complete all as specified andas directed. |
| 16 | S&F MS butt hingescold rolled medium weight 100mm size, ISI marked, complete all as specified andas directed. |
| 17 | S&F Stainless Steel butt hinges medium weight 100mm size, ISI marked, complete all as specified andas directed. |
| 18 | S&F Mild Steel Helical Door Spring 300mm long rat tail pattern with and including roller and roller plate, complete all as specified. |
| 19 | S&F IN REPAIR Mild Steel Helical Door Spring 300mm long rat tail pattern with and including roller and roller plate, complete all as specified. |
| 20 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete, complete all as specifiedand as directed. |
| 21 | S&F IN REPAIR Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete, complete all as specifiedand as directed. |
| 22 | S&F 150mm long extruded section aluminium alloy anodised handles fabricated type, complete all as specified and as directed. |
| 23 | S&F IN REPAIR 150mm long extruded section aluminium alloy anodised handles, fabricated type, complete all as specified and as directed. |
| 24 | S&F 125mm long extruded section aluminium alloy anodised D type handles, fabricated type, complete all as specified and as directed. |
| 25 | S&F IN REPAIR 125mm long extruded section aluminium alloy anodised D type handles fabricated type, complete all as specified and as directed. |
| 26 | S&F Mild Steel skeleton tower bolt of 375mm long with steel sheet pressed plate and stapple stove enamelled black, MS bright bolt, complete all as specified andall as directed. |
| 27 | S&F Aluminiumanodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified andall as directed. |
| 28 | S&F IN REPAIR Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified andall as directed. |
| 29 | S&F IN REPAIR 50mm size cupboard lock, brass with two levers,grade 1, complete all as specified andall as directed. |
| 30 | S&F Floor door stopper of Brass body & tongue with 140mm long cover plate and hard drawn steel spring, fixed in door, complete all as specified and as directed. |
| 31 | S&F IN REPAIR Floor door stopper of Brass body & tongue with 140mm long cover plate and hard drawn steel spring, fixed in door, complete all as specified and as directed. |
| 32 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed. |
| 33 | S&F IN REPAIR Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed. |
| 34 | S&F IN REPAIR Mild Steel curtain rod, chromium plated, powder coated, fancy type, 25mm bore dia with brackets, fixing stops, roller bracket, wooden nobs etc., with Harrison rails, complete all as specified. |
| 35 | S&F Prelaminated particle board 18mm thick, Interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to cub board shelves / cabinets etc., complete all specifed. |
| 36 | S&F 1st class Teak wood lipping of size 18mm wide x 6mm thick, fixed with screws around edges of cub board shutters etc., complete all specifed. |
| 37 | S&F Mild Steel hasp & staple of 125mm size, wire type, stove enamel black, with and including bolt, hinge plate et., fixed with screws, complete all as specified. |
| 38 | M&L for Light Shade Coloured Vitrified Ceramic tiles 08mm to 10mm thick (square/rectangular) area of each tile exc. 0.18 Sq.m. but n. exc. 0.36 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed. |
| 39 | M&L for False ceiling with High Pressure Steam Cured (HPSC) 4mm thick Non Asbestos Fibre Cement ceiling boards fixed with and including supply & fixing powder coated aluminium snap grid of size 605mmx605mm consisting of 25X25X1.25mm aluminium angles and TEEs of size 35x25x1.25mm with galvanised wire of required length and 2mm dia hanger grid suspended from trusses/ ceiling and purlins not exceeding 1200mm c/c both ways, with and including applying two coats of oil bound distemper over a coat of primer, with and including taking down existing u/s ceiling with frame work of any description, making good the disturbed wall & ceiling surfaces and taking down and refixing of all electrical fittings and extension of fan rods as per site requirement, complete all as specified and as directed. |
| 40 | M&L for Rendering 10mm thick on fair faces of new brick work or concrete surfaces of walls in CM 1:6 finished even and fair without using extra cement, complete all as specified and as directed. |
| 41 | M&L for PCC type B0 [1:2:4] using 12.50mm graded stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, finished plain fair faces, including demolition of old cement concrete of any type, complete all as specified and as directed. |
| 42 | M&L for Rendering 15mm thick on fair faces of stone masonry walls in CM 1:6 finished even and fair without using extra cement, complete all as specified and as directed. |
| 43 | M&L for preparation of newly plastered surfaces of wall andapplying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and as directed. |
| 44 | M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with siliconadditives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with and including preparation of new plastered surfaces of any description, all as per manufacturer\"s instructions, complete all as specified and as directed. |
| 45 | S&F IN REPAIR Aluminium (Die Cast) Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified. |
| 46 | S&F IN REPAIR 3mm thick sheet glass ordinary quality andglazing with oil putty in squaresexc 0.5 Sqm in each pane, with and including hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 47 | S&F IN REPAIR 5mm thick sheet glass ordinary quality andglazing with oil putty in squaresexc 0.5 Sqm in each pane, with and including hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 48 | S&F MS Flat iron of size 25x3mm thick as in hold fast and similar small article conforming toFe-290 Grade-E-165, complete all as specified and as directed. |
| 49 | M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out ofMS tube of top and bottom rails, MS frame shall be covered with heat moulded prelaminated PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheet for top rail ,lock rail and bottom rail on either side and as gap insert for top and bottom rail. Pannelling of prelaminated PVC sheet to be fitted in MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings,complete all as specified and as directed. |
| 50 | S&F Mild Steel Continuous (piano) hinges of 30mm width of flaps (when open) bright finish or electrogalvanized, complete all as specified. |
| 51 | S&F IN REPAIR Mild Steel Continuous (piano) hinges of 30mm width of flaps (when open) bright finish or electrogalvanized, complete all as specified. |
| 52 | S&F Aluminium powder coated frame for doors, partitions, windows and ventilators with one or more rebates ofextruded built up standard tubular and other section of approved make, according to IS 1868 (Thickness of powder coating not less than 50 micron) fixed with rawl plugs, screws or fixing with clamps or with expansion hold fasteners including necessary filling up of gaps of junctions at top, bottom and sides with aluminium sections should be smooth, rust free, straight mitred and jointed mechanically wherever required including cleat angle, aluminium anodised screws etc. complete all as specified and as directed. |
| 53 | S&F factory made powder coated aluminium door shutters, sections weight not less than 0.55 kg/m, withand including necessary joining cleats, glazing clips, rubber neoprene packing and powder coated aluminium snap beading screws complete all as specified. (thickness of powder coating not less than 50 micron), complete all as specified and as directed by the Engineer-in-Charge.Note : Only aluminium shutter for the doors shall be measured in sqm.All the aluminium fittings/fixtures such as butt hinges, tower bolts, handles etc, Pre-laminated particle board and sheet glass shall be measured and paid separately under relevant items |
| 54 | M&L for Rubber coated chequered cement concrete tiles of size 300mm x 300mm x 25mm thick, with grey cement andpigments with GLOSSY FINISH set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bedin cement mortar 1:6 as in pathways, with and including demolition of existing floor tiles of any description, complete all as specified and as directed. |
| 55 | S&F Prelaminated particle board 9mm thick, Interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to cub board shelves / cabinets etc., complete all specifed. |
| 56 | S&F Stainless steel wall mounted plate rack of size 900 x 1200 x 300mm and thickness of sheet 1mm with provn for keeping plates and other crockery fixed with screw and rawal plug etc., on wall, complete all as specified and as directed. |
