|
| 1 | Boring holes 3m deep in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50m (dia of pile 300mm) complete all specified and directed. |
| 2 | Excavation in trenches in soft/ loose soil not exc 1.5m wide and not exc 1.5m deep for foundn etc n. exc 10sqm on plan and n. exc 1.5m in depth complete all specified and directed. |
| 3 | M&l PCC 1:4:8 type D-2 (using 40mm graded stone agg) in foundn filling and mass concrete. |
| 4 | M&L RCC M-25 Design Mix type B1 as in Foundations, including rafts, footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs and mass concrete complete all specified and directed. |
| 5 | M&L RCC M-25 Design Mix typeB1 (using 20mm graded stone aggregate) in columns pillars etc . |
| 6 | M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as inbeams, cantilevers, bressummers, Lintels over 1.5 m span etc complete all specified and directed. |
| 7 | M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all specified and directed. |
| 8 | Form work to sides of rough finished surfaces of concrete foundations, footings, bases of columns, sides and sofits (if any) of foundations & plinths beams and similar wk flat etc complete all as specified and as directed. |
| 9 | Form work to rough finished square, rectangular or polygonal concrete surfaces as in sides of columns, pillars, posts, struts,etc complete all as specified and as directed. |
| 10 | Form work to rough finished flat surfaces as in sides and soffits of beams, lintels, coping etc complete all as specified and as directed. |
| 11 | Form work to rough finished flat surfaces as insoffits of suspended slabs such as roof slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 12 | Brick work with sub- class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 13 | All as per item No 12 above but except brick |
| 14 | M&L Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and as directed. |
| 15 | Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns , hooking ends & binding with & including MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 16 | Mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns , hooking ends & binding with & including MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed |
| 17 | M&L hard core of broken bricks of gauge n. exc 63mm deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surface complete all as specified and as directed |
| 18 | M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone agg) as in sub base complete all specified and directed. |
| 19 | Returning, filling in, including spreading, levelling, watering & well ramming in layers not exceeding 25 mm in soft/loose soil complete all as specified and directed. |
| 20 | Removing excavated material not exceeding 50 m & depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 21 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.complete all as specified and as directed |
| 22 | S&F Factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture, proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all specified and directed. |
| 23 | S&F 100 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as spd and directed. |
| 24 | S&F 150 mmextruded brass handle, fabricatedtype, polished complete all as specified anddirected |
| 25 | S&F Aluminium alloy, anodised, sliding door bolt 200mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 26 | S&F 150 mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed |
| 27 | Supply only water proofing compound (liquid), ISI marked. |
| 28 | M&L for plastering 15 mm thick in cement mortar 1:4 on concrete surfaces with liquid water proofing compound@ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smoothwithout using extra cement over roof slabcomplete all as specified and directed . NOTE: water proofing compound shall be measured and paid seperately |
| 29 | M&L15 mm thick rendering on fair faces of brick /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed. |
| 30 | All as per itme No 29 above but on other than fair faces. |
| 31 | M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed. |
| 32 | M & L for preparation of newly plastered surfaces ofwall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed. |
| 33 | M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete. |
| 34 | M&L forapplying two coat of cement base paint on plastered wall surfaces over a coat of primer incl preparation of surfaces etc complete all specified and directed. |
| 35 | M & L for preparation of newly plastered surfaces ofceiling and applying 1 mm thick wall care putty including preparation of new surface complete all specified and directed. |
| 36 | M&L coloured ceramic glazed tiles of size 450x300x7mm thick as in dado/skirtingetc incl 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 37 | M&L for joint free non skid colouredtiles 7 to 8 mm thick(square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed in CM 1:6complete all specified and directed. |
| 38 | Supply & laying of CPVC pipes 20 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed. |
| 39 | Supply & laying of CPVC pipes 25 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all specified and directed. |
| 40 | Supply & laying of CPVC pipes 32 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all specified and directed. |
| 41 | Supply & laying of CPVC pipes 40 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all specified and directed. |
| 42 | Note for item No 38 to 41(i) CPVC fittings with brass threading will be measured and paid separately under items No(ii) Cost of normal SDR CPVC fittings Like Bend, Tee, Elbow, Union etc shall be inclusive under the quoted rate of pipe. |
| 43 | S&F of CPVC 20 mm Outer dia Brass Elbow complete all as specified and directed. |
| 44 | S&F of CPVC 20 mm Outer dia Brass Elbow (3/4 x 1/2) complete all as specified and directed. |
| 45 | S&F of CPVC 20 mm Outer dia Brass Tee complete all specified and directed. |
| 46 | S&F of CPVC 20 mm Outer dia male Brass threaded Adoptor (3/4 x 1/2) (MTA/MBTA) complete all as specified and directed. |
| 47 | S&F of CPVC 25 mm Outer dia male Brass threaded Adoptor (3/4 x 1/2) (MTA/FBTA) complete all as specified and directed. |
| 48 | S&F of CPVC 20 mm Outer dia female Brass threaded Adoptor (3/4 x 1/2) (MTA/FBTA) complete all as specified and directed. |
| 49 | S&F of CPVC 25 mm Outer dia female Brass threaded Adoptor (3/4 x 1/2) (MTA/MBTA) complete all as specified and directed. |
| 50 | S&F of CPVC 20 mm Outer diaBrass Tank Adoptor complete all as specified and directed. |
| 51 | S&F of CPVC 25 mm Outer diaBrass Tank Adoptor complete all as specified and directed. |
| 52 | S&F of CPVC 20 mm Outer diaBrass Union complete all as specified and directed. |
| 53 | S&F of CPVC 25 mm Outer diaBrass Union complete all specified and directed. |
| 54 | S&F 1000 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I. |
| 55 | S&F Gun-metal, globe or gate valves 25mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed. |
| 56 | S&F Gun-metal, globe or gate valves 40mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed. |
| 57 | S&F white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 58 | S&F in repair vitreous china squating pan \"Orissa\" pattern WC size 580x440 mm white with integral foot rest and trap andincluding connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 59 | S&F 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float & handle including brackets complete all as specified and directed. |
| 60 | S&F PVC (SWR) nahani/ floor trap, plain with grating including jointing with solvent cement 75mm dia etc complete all specified and directed. |
| 61 | S&Fin repair bib tap 15 mm bore,cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 62 | S&F 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and directed. |
| 63 | S&F CP two way angle valvewith wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed |
| 64 | S&FPVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed. |
| 65 | S&F CP brass tubular tower rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 66 | S&F angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 67 | S&F plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified anddirected. |
| 68 | S&F PVC (SWR) \"P\" trap for 110 mm dia etc complete all as specified and directed. |
| 69 | S&F in repair vitreous chinacounter shank oval type including PTMT bottle trap but excluding pillar tap, etc complete. |
| 70 | S&F in RepairVitreous China Urinal, full stall type, white incl waste coupling (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed |
| 71 | S & Ffor Urinal spreader of PTMT of any colour for fixing with 15 mm dia pipe. (Minimum weight 60gmscomplete all Asdirected ) |
| 72 | S & F Vitreous china urinal partition white of size 310x700 mm. complete all as specified and direted. |
| 73 | M&L for RCC 1:2:4 type B1 as in kitchen platform, shelves & chajjas etc (using 20 mm graded stone aggregate) including necessary form work complete. |
| 74 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 75 | M/L PVC(SWR) bend of110mm dia of any radius etc complete all as specified and directed. |
| 76 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed |
| 77 | M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protectionfinishing even & smooth without using extra cement laid in bays with construction complete all as specified and directed. |
| 78 | M&L for 150 mm dia reinforced concrete pipes, class NP 2with one collar per length of pipe complete all as specified. |
| 79 | M&L for concrete bed to drain pipes of 150mm dia including packing under & haunching against the sides of pipes after they are laid and tested;in PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) complete all as specified anddirected. |
| 80 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening complete all as specified and directed. |
| 81 | S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed. |
| 82 | S&F Gun metal, globe or gate valve with iron wheel head, 20 mm bore,screwed both ends for iron pipe complete all as specified anddirected. |
| 83 | S&F Vitreous China Urinal, Half stall type, white incl spreader (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed |
| 84 | M& LforPre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 85 | S&F framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-W (Gde-E-250) quality-A, including taking down old steel gates. |
| 86 | M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 87 | Dismantling of floor, walls, roof tiles including bedding but backing and rubbish off permises all as specified. |
| 88 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick (Mat finish) (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc with and including over 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed with white or coloured cement to match complete. |
| 89 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick Mat Finish (Square/rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 Sqm , in vertical surface such as skirtings, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match with shade of tiles, including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed. |
| 90 | M&L for glazed ceramics coloured tiles of size 450x300x7mm/600x300x7mm thick in vertical surfaces such as skirting/dados/wall, etc with and including over 10mm thick rendering in cmeent mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces. |
| 91 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete. |
| 92 | M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protectionfinishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete. |
| 93 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 94 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer\"s instructions and finished the surfaces even and fair without using extra cement complete.Note:Liquid WPC will be measured and paid separately. |
| 95 | Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and as directed. |
| 96 | All as per above item No but exc 1.5 Sqm but n.exc. 4 Sqm each. |
| 97 | Taking down shutter of any description exc 1 sq. m and n exc 2 sw. m each and removing to store. |
| 98 | S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats. |
| 99 | S&F steel ventilators with top hung shutters including hinges, steel peg stay complete. |
| 100 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. |
| 101 | S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as spd. |
| 102 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long. |
| 103 | S&F mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete all as specified and as directed. |
| 104 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as spd. |
| 105 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 106 | S&FGI wire cloth 0.56 mm nominal dia of wire andbrick average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 107 | S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 108 | S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane. |
| 109 | S & F 3 mm thick figured glass pin head type and glazing with oil putty in squaresn exc 0.5 Sqm in each pane etc complete. |
| 110 | Taking up or down steel tubing and connections, including cleaning for re-fixing of 15 mm dia. |
| 111 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia. |
| 112 | Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete. |
| 113 | S&F inHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 114 | S&FinPVC connection 15mm dia size and 600 mm long with 2 Nos check nuts its washers complete all as specified and as directed. |
| 115 | S&F in repair 5 mm thick looking mirror 600 x 450 mm selected quality glass mounted on 6 mm thick commercial plywood, with aluminium beading and fixed to wall with brass screws, cups and washers complete as specified and directed. |
| 116 | S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia. |
| 117 | S&F in repair of stainless steel soap dish, of standard size and shape complete. |
| 118 | S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed |
| 119 | Taking down AC/PVCpipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mmdia pipe. |
| 120 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete. |
| 121 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 122 | S&F PVC (SWR) pipes 50mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 123 | S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipecomplete. |
| 124 | M/L PVC(SWR) bend of110mm dia of any radius etc complete all as specified and directed |
| 125 | S&F PVC (SWR) bends any radius provided with access door of 110 mm dia |
| 126 | M/L PVC(SWR) Tee of110mm dia etc complete all as specified and directed |
| 127 | S&F PVC (SWR) bends any radiusprovided with access door of 75 mm dia |
| 128 | S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia etc complete. |
| 129 | Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs all as spd. |
| 130 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminiumrod& high density plastic ball screwed for iron pipe and fixed.(Minimum weight20mm-210gms) complete. |
| 131 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore,screwed both ends for iron pipe complete. |
| 132 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 133 | M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed. |
| 134 | S&F in repair vitreous chinacounter shank oval type including PTMT bottle trap but excluding piller tap, etc complete. |
| 135 | S&F in RepairVitreous China Urinal, full stall type, white incl waste coupling (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed |
| 136 | S&F in repair 5.5mm thick looking mirror selected quality glass exc 0.50Sqm each and fixed to wall with brass screws, cup and washers including polishing, rounded off edges of glass and drilling holes in glass complete all as specifed and as directed. |
| 137 | Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete. |
| 138 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)complete all as specified and as directed. |
| 139 | S&F MS angle Iron as in fencing posts/angle horn and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc conforming to Fe 410-O or Fe 310-O complete all as specified and directed. |
| 140 | S&F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or typing at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line wire to be measured). |
| 141 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level)all as specified and directed |
| 142 | M&L 25 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete. |
| 143 | M&L for 20 mm thick granite slab (of any type) work(table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete. Note ( Granite in single peice and three no\"s grooved on each Step) |
| 144 | M&L for 20 mm thick Granite (of any type) work (table rubbed andpolished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete |
| 145 | Taking down carefully aluminium point wiring(any type)for one light point, fan point ,exhaust fan point, bell point, power point complete including all fittings such as switches, socket, pendents holder, ceiling rose, sketch fittings, tube light fittings, regulatores unscrewing the switch sockets, ceiling rose, regulators from boards/outlet boxesand making good the disturbed surfaces of wall/ ceiling and colour washing matching with the existing colour wash all as specified and directed by Engineer-in-Charge. |
| 146 | M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding MS boxes for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed. |
| 147 | All as per item no 146above but one 5 Amps socket out let point controlled by one switch on same board with other switches. |
| 148 | All as per item no 146 above but one 5 Amps socket out let point on independent board controlled by one switch. |
| 149 | All as per item no 146 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. |
| 150 | All as per item no 146 above but wiring with 4.0 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. |
| 151 | S & F for switch piano, flush type, 5 amps, single pole ,one way , 230 voltcomplete all as specified and directed. |
| 152 | Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed. |
| 153 | Supply and fixingswitch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed. |
| 154 | Supply and fixingsocket outlet flush type multipurpose 2 in1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed. |
| 155 | Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 156 | Supply and fixingdouble door SPN DBs eight wayof powder coated DB\"s suitable for MCB\"s fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed . |
| 157 | Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 158 | Supply and fixingMCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity,\"C\" type including connection with suitable size aluminium / copper lugs complete all as specified and directed . |
| 159 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type(enhances safety) with high quality polycarbonate diffuser , 4 ft,2000lm,voltage protection range 140V -270 V,NW 4000K,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make : Philips, Bajajor eqivalent. |
| 160 | Supply and fixing LED lights fitting 1x 10W, 220V,AC decorative box type(enhances safety) with high quality polycarbonate diffuser , 2 ft,voltage protection range 140V -270 V,NW ,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make : Philips,Bajaj or eqivalent. |
| 161 | Supply and fixing LED light fitting 1x9W/10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Crompton/ Bajaj/Havells. |
| 162 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm andgrouting withnut , bolts & Fastenaron the wall and make good the disturbed surface and electric connection with 1.5 Sqmmthree core PVC insulated round flexible copper wire upto ceiling rose complete all as specified and directed .Make: Crompton/ Bajaj/Havells/Usha. |
| 163 | M&L for Sub main wiringtwo single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete. |
| 164 | Supply and fixing ofEarthing to panel with galvanised steel earth plate electrode60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point includingexcavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete |
| 165 | S & F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in GI pipe fixed to pole complete all as specified and directed. |
| 166 | Supply and laying for galvanised iron tubing medium gradeof 25 mm dia with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed . |
| 167 | S & F for Gun metal gate valvewith iron wheel head screwed both ends ISI markedfixed to GI pipe of 25 mm dia complete all as specified and as directed. |
| 168 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core. Make: Havell\"s/Polycab/ KEI/MESCAB |
| 169 | M & L clean dry river sandin trenches/ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth after laying the cable complete all as specified. Note:- Punned thickness shall be measured and paid. |
| 170 | M & L for old sizesub class ‘B’ bricks, laid in trenches as cable covers / protectioncomplete all as specified and directed. |
| 171 | Supply and fix electric water heater( Geyser) , storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc |
