|
| 1 | E/W embankment in inordinary soil, earth work in embankment to be in 20 cm Layers including remming and dressing the surface to required level and slope and also including Cartage lead upto 10 Kms as directed by the Engineer incharge.Including Royallity as S.I. No. 253(a)+231+261 |
| 2 | construction of granular sub-base by providing coars graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at desired density, including cost of all material, labour, T&P including all taxes, royalty, labour cess complete, as per mort clause (A.R.) |
| 3 | M -150 Brick Work with 1:4 (one cement & four coarse sand mortar in foundation and plinth including supply of all materials, labour , T & P etc. required for proper completion of the work as per S.I. No 305 (a). |
| 4 | 12 mm thick plaster with cement and coarse sand mortar in 1:4 over brick work minimum thickness not be less than 1 cm including supply of all materials, labour, T & P etc. required for proper completion of the work as per S.I. No.584(a). |
| 5 | Cement concrete with 2 cm gauge stone grit, coarse sand & cement in the proportion of 4 :2:1 including supply of all materials, labour , T & P etc. required for proper completion of the work as per S.I. No. 279(a). |
| 6 | Supply of 80 mm thick Precast cement concrate I shaped interlocking paver blocks ISI mark confirming to IS:15658-2000 with top Layer of minimum 5 mm thickness having plan dimension 200 x (160+120 mm) of O.P cement , smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-compression mechanism. The compressive strenth of concrate paver block shall not be less then 40 MPa & weight 4.50 kg per including cost of material, with a blanket Layer 4.00 cm.thick fine sand . including labour,T&P etc.required for proper complition of the work as directed by Engineer-in-charge.COLOR |
| 7 | Supply of 80 mm thick Precast cement concrate I shaped interlocking paver blocks ISI mark confirming to IS:15658-2000 with top Layer of minimum 5 mm thickness having plan dimension 200 x (160+120 mm) of O.P cement , smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-compression mechanism. The compressive strenth of concrate paver block shall not be less then 40 MPa & weight 4.50 kg per including cost of material, with a blanket Layer 4.00 cm.thick fine sand . including labour,T&P etc.required for proper complition of the work as directed by Engineer-in-charge. GRAY |
| 8 | Structural steel work riveted, bolted or welded in builtup section , trusses and framed work including cutting , hoisting , fixing in position and applying a primary coat of approved steel primer all completeDSR -2023 , S.No.10.2 |
| 9 | Providing and fixing G.I chain link fabric fencing of required with in mesh size 50x50 mm including strenthing weight 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of engineer-in-charge, made of G.I wire of dia 4mm DSR-16.70.1 Please Enable Macros to View BoQ information |
