Name of Work: Supply of Machinery, PVC Pipe & Sprinklers for various parks at Andrews Ganj Ward No. 145, Central Zone
Sl. No.
Item Description
1
Hedge TrimmerEngine: 2- Stroke - Single Cylinder Air cooled.ENGINE DISPLACEMENT: Should be between 20-25 CCPower Output: Should be minimunm 1 HPFUEL TANK CAPACITY: Minimum 400 mlWEIGHT: Should not be more than 6.0KGCLUTCH: Clutch Linning should be metal only.HANDLE: Must have Rotating multi-function handleANTI VIBRATION SYSTEM: Must have spring loaded technology for Anti Vibration SystemDesign: Should have Double sided blade with tooth spacing minimum 35mmBar Length: Minimum 600 mmBlade: Should have Chrome Plated -Anti Corrsion. Stroke Rate ( l/min): Minimum 3000 Vibration Level m/s2 at Right Handle: Should not be more than 3.5 m/s2.Sound pressure level (dB..(A)): Should not be more than 95Certification: Should have TUV with EN ISO 10517:2009
2
Brush CutterEngine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLYENGINE DISPLACEMENT: 40.2CCPower Output: 2Kw/2.7HPMax Output shaft speed at cutting attachment: Should be minimum 9000 RPMCARBURETOR: Diaphragm with compensator technology.Fuel Tank Capacity: Minimum 600 ml.WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 KgCLUTCH: Centrifugal Type, Clutch Shoe Support base & liningMetal Only.MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right handle.BRUSHCUTTER HARNESS: Should be double shoulder harness only.ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system.Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2Sound Pressure Level Db(A): Should not be more than 105 dB(A)Drive shaft design: Must have drive shaft ends square design type only.Certification : Must have valid EN Certificaton
3
Operated Chain SawEngine : SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLYDisplacement: 45.4CCPOWER OUTPUT : 2.3Kw. 3.0 HP Max.engine speed (with guide bar & chain ): At least 12500 RPMCarburetor: Diaphragm type & compensator technology.Fuel tank capacity: Should be minimum 450 ml.Dry weight( without cutting attachment ): Should not be more than 5.0 KGClutch: Clutch shoe LININING metal ONLY.Guide Bar Design: Should be Rollomatic type.Guide Bar Length: Guide bar length must have 50 cm/20\" inch. Guide bar and Chain: Should have same manufacture only.Chain Type: Every drive link require groove & small oil receiver hole for better Lubrication. 0.325 inch Pitch & 1.6 mm thickness only.chain Lubrication System: Fully automatic ,speed controlled rotary oil pumpChain oil tank capacity: Should be minimum 200 ml.Oil Pump Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable.Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off.Guaranteed Sound power level: Should not be more than115 Db(A)Maximum chain velocity to ISO 11681: Should be minimum 28 m/sCertification: Productshouldhave valid DPLF certificate with test standard EN ISO 11681.
4
Petrol Operated Pole PrunerEngine : Single Cylinder, 2 Stroke, Air cooled OnlyDisplacement: Should be between 25-30 CC POWER OUTPUT : Should be minimum 1.2 HPWeight (Dry without cutting attachment & fuel ): Should not be more than 7.5 KgFuel tank capacity (ml): Should be minimum 400mlChain oil capcity (ml): Must have minimum 200 ml.Clutch : Clutch shoe linining should be metal only.Guide bar length : Minimum 30cm Guide bar And Chain : Should have same manufacture only.Chain Type : Every drive link need groove & small oil holes for better Lubrication. Saw chain pitch should be 1/4\" OR 3/8Picco only and drive link thickness must have 1.1 mm or 1,3 mm.Max.output shaft speed (RPM): Should be minimum 8000 RPM at chain sprocket.Equipment total Length with guide bar and chain ( cm ) : Should be mimimum 220 cm - compressed & total length of equipment - minimum 350 cm - Extended. Sound Pressure Level (Db/A): Should not be more than 95 Db(A)Vibration Measurement m/s2 at control handle - Extended Poistion : Should not be more than 5.5 m/s2Certification :Must have TUV certification with test standard EN ISO 11680.
5
Pole PrunerSupply of Telescopic Pole Pruner:-Specification:- Pole length incuding blade: 6.5m Blade Material: Hardened & Tempered high carbon steel .The head of the blade shall have a hooked tip useful for cutting twigs Saw Blade Shape: Hooked type curved saw blade Type & no of cutting teeth :Tripple grounded 86 teethBlade Length : 15\"-16\" Pole type: Light weight telescopic tubular aluminium alloyextendable poleNo of positions for pole HeightAdjustment : 10 positionsLocking Mechanism : Ergonomicvally designed two way locking mechanism Total Working length : Max 21\"9\"(6623 mm), MIn 10\"3\" (3103mm) Branch cutting capacity: 200mm max
6
Lawn MowerSupply of Lawn Mower:-Specification:- Type of Machine Walk behind Lawn MowersPower Source Petrol EngineStart Type Recoil / Pull StartSpeed control Variable SpeedDrive Type All Wheel DriveBlade style Rotary TypeBlade Engagement ElectromagneticCut Width (mm) 500 to 524Minimum Cut Height 1 millimeterMaximum Cut Height 26 millimeterBlades MetallicNumber of Blades 1Number of positions for cut - height adjustment 2Number of levers for Cut - height adjustment Single leverNumber of Wheels 4Front Wheel Size 200 millimeterRear Wheel Size 200 millimeterWheel Tyres PneumaticIf yes, Grass Catcher / Collector / Bag Volume 88 liter\"Engine Power Rating (Watt)\" 4000 to 4999Engine Fuel Tank Capacity - 1 Ltr.
7
PVC PipeSupply PVC Pipe MADE OF Nylon with Braiding, Inner Diameter 30 mm, Length of Coil 30 Mtr. & Wall Thickness 3 mm up of 1st grade PVC (As per Sample)
8
Rain gun StainedsRain gun staineds: Anastain Jaguar water gun-alluminium alloy body and ARM, gun matel hex nutt and inlet jeckt and plactic nozal.
9
Tryport StandTryport Stand: 1-1/2” rain gun stained: 1-1/2” with GI riser 1-1/2” x 4 fit.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
