|
| 1 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres As per Clause 202 (Bridge work) including All Taxes but excluding GST |
| 2 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 (Bridge work) including All Taxes but excluding GST |
| 3 | Filling in Foundation Trenches as per Drawing & Technical Specification Sr No. 11.2 Ref No.300 & 1200 including supply of all material, labour, T&P all taxes royalty,labour cess etc. required for proper completion of work as per direction by the Engineer In-charge. (Bridge work) including All Taxes but excluding GST |
| 4 | Providing concrete for Plain cement concrete (M-10) in open foundation complete as per drawing and technical specifications Clauses 802,803,1202&1203 Sr No. 11.4 Ref No.800 & 1200 in leveling coarse including supply of all material, labour, T&P all taxes royalty,labour cess etc. required for proper completion of work as per direction by the Engineer In-charge. (Bridge work) including All Taxes but excluding GST |
| 5 | Providing concrete for Reinforced cement concrete (M-25) in open foundation complete as per drawing and technical specifications Clauses 802,803,1202&1203 Sr No. 11.4 Ref No.800 & 1200 including necessary centering and shuttering etc.complete including supply of all material, labour, T&P all taxes,labour cess etc. required for proper completion of work as per direction by the Engineer In-charge (Bridge work) including All Taxes but excluding GST |
| 6 | Providing concrete for Reinforced cement concrete (M-25) in sub structure complete as per drawing and technical specifications Clauses 802,803,1202&1203 Sr No. 12.5 Ref No.800 including necessary centering and shuttering etc.complete including supply of all material, labour, T&P all taxes,labour cess etc. required for proper completion of work as per direction by the Engineer In-charge (Bridge work) including All Taxes but excluding GST |
| 7 | Supplying, Fitting and Placing TMT bar Reinforcement (Fe 415) in substructure complete as per Drawing and Technical Specifications. Clauses 1002,1005,1010 & 1202 including supply of and all material, labour, T&P all taxes, labour cessetc. as per direction by the Engineer In-charge (Bridge work) including All Taxes but excluding GST |
| 8 | Providing concrete for Reinforced cement concrete (M-25) in super structure complete as per drawing and technical specifications Clauses 802,1205.4&1205.5 Sr. No. 13.1 Ref. No. 800 including necessary centering and shuttering etc.complete including supply of all material, labour, T&P all taxes,labour cess etc. required for proper completion of work as per direction by the Engineer In-charge (Bridge work) including All Taxes but excluding GST |
| 9 | Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 Sr. No. 13.2 Ref. No. 1000 including supply of and all material, labour, T&P all taxes, labour cessetc. as per direction by the Engineer In-charge (Bridge work) including All Taxes but excluding GST |
| 10 | Providing & Fixing of Weep Hole in abutment wall & retaining wall completed as per drawing & specification.including supply of all material, labour, T&P all taxes, labour cess etc. required for proper completion of work as per direction by the Engineer In-charge . (Bridge work) including All Taxes but excluding GST |
| 11 | Providing & Fixing in position 20 mm thick premoulded joint filler in expension joint for fixed ends of simply supported spans, coverd with sealant complete as per drawing & specification. Sr,. No 13.2 Ref No. 1200 (Bridge work) including All Taxes but excluding GST |
| 12 | Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications (Bridge work) including All Taxes but excluding GST |
| 13 | Providing & Fixing of Drainage spout in slab completed as per drawing & specification.including supply of all material, labour, T&P all taxes, labour cess, royalty etc. required for proper completion of work as per direction of Engineer In-charge . (Bridge work) including All Taxes but excluding GST |
| 14 | Providing and laying boulders apron on bed for protection against scour with stone boulders weighing not less than 25 kg each complete as per drawing and Technical specification Sr No. 15.4 Ref No. 2504 (Protection work) including All Taxes but excluding GST |
| 15 | Backfilling behind the abutment wall and return wall complete as per drawing and technical specification Clause 1204.3.8 Sr No. 12.10 Ref No. 1200 including supply of all material, labour, T&P all taxes, royalty, labour cess etc. required for proper completion of workas per direction of Engineer In-charge . (Protection work) including All Taxes but excluding GST |
| 16 | Providing and laying of Filter media with granular materials/stone crushed aggregates as per specification to a thickness of not less then 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. Clause 1204.3.8 Sr No. 12.11 Ref No. 1200 complete as per drawing and Technical Specification. (Protection work) including All Taxes but excluding GST |
| 17 | Construction of embankment with approved material obtained from borrow pits with all lift and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. As per MORTH Specification cluase 3.16.305 (Diversion work) including All Taxes but excluding GST |
| 18 | Brick on edge pavement with straight over burnt brick on parties with bricks, laid dry joints filled with fine sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8\") depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work(SOR 20.05) (Diversion work) including All Taxes but excluding GST |
| 19 | Providing & laying of 1000 mm hume pipe in position including supply of all material, labour, T&P all taxes, labour cess etc. required for proper completion of work as per direction of Engineer In-charge .(SI. No. New Item 20.27(B)(IV))etc. required for proper completion of work as per PWD specifications (Diversion work) including All Taxes but excluding GST |
| 20 | Removing all type of Hume Pipes and Stacking within a lead of 1200 metres including Earthwork and Dismantling of Masonry Works. As per MORT&H Specification cluase 2.4(ix) (Diversion work) including All Taxes but excluding GST |
| 21 | Filling empty cement bag & placing in position including cost of all material, labour, T&P, labour cess, all taxes complete. (Diversion work) including All Taxes but excluding GST |
| 22 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density. Sr No. 4.1 Ref No. 401 (Approch Road) including All Taxes but excluding GST |
| 23 | Providing, laying, spreading and compacting stone aggregates of 45-63 mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.Sr No. 4.8 Ref No. 405/2 (Approch Road) including All Taxes but excluding GST |
| 24 | Providing, laying, spreading and compacting stone aggregates of 22.4-53 mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.Sr No. 4.8 Ref No. 405/2 (Approch Road) including All Taxes but excluding GST |
| 25 | Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 Sr No. 5.1 Ref No. 502 (Approch Road) including All Taxes but excluding GST |
| 26 | Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. Sr No. 5.2 Ref No. 503 (Approch Road) including All Taxes but excluding GST |
| 27 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.Sr no. 5.9 Ref No. 508 (Approch Road) including All Taxes but excluding GST |
| 28 | Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 .Sr no. 5.12 Ref No. 510 (Approch Road) including All Taxes but excluding GST Please Enable Macros to View BoQ information |
