|
| 1 | construction of granular sub-base by providing coars graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at desired density, including cost of all material, labour, T&P including all taxes, royalty, labour cess complete, as per mort clause (A.R.) |
| 2 | M -150 Brick Work with 1:4 (one cement & four coarse sand mortar in foundation and plinth including supply of all materials, labour , T & P etc. required for proper completion of the work as per S.I. No 305 (a). |
| 3 | 12 mm thick plaster with cement and coarse sand mortar in 1:4 over brick work minimum thickness not be less than 1 cm including supply of all materials, labour, T & P etc. required for proper completion of the work as per S.I. No.584(a). |
| 4 | Cement concrete with 2 cm gauge stone grit, coarse sand & cement in the proportion of 4 :2:1 including supply of all materials, labour , T & P etc. required for proper completion of the work as per S.I. No. 279(a). |
| 5 | Supply of 80 mm thick Precast cement concrate I shaped interlocking paver blocks ISI mark confirming to IS:15658-2000 with top Layer of minimum 5 mm thickness having plan dimension 200 x (160+120 mm) of O.P cement , smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-compression mechanism. The compressive strenth of concrate paver block shall not be less then 40 MPa & weight 4.50 kg per including cost of material, with a blanket Layer 4.00 cm.thick fine sand . including labour,T&P etc.required for proper complition of the work as directed by Engineer-in-charge. |
| 6 | Supply and fixingof 6 to 8 mm thick ivory or light shades vitrefied tiles 600*600 mm size in flooring and skirting laid with 1:3 cement and Approved Coarse sand mortar finished with white cement slurry, jointing, and polishing complete, including supply of all materials, labour , T & P etc. required for proper completion of the work as per S.I. No.New item S.I 14.25 |
| 7 | Supply and fixing 6 mm China white glaged tiles in flooring or in skirting or dado laid with 1:3 cement and Approved Coarse sand mortar finished with white cement slurry, jointing, and polishing complete, including supply of all materials, labour , T & P etc. required for proper completion of the work as per S.I. No.628 |
| 8 | Providing wall putty on New surface with approvl quality material of Berjer J.K, Birla or similar make 02 coat including supply of all materials, labour , T & P etc. required for proper completion of the work as per S.I.N.O new item |
| 9 | Finishing wall with water proof cement paint(Weather coat) of approved make and quality on new work with three coat to give an even shade including supply of all materials, labour , T & P etc. required for proper completion of the work as per S.I.N.O. 660+661+662 new item |
| 10 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR NO. 18.48 |
| 11 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquitoproof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredW.C. pan with ISI marked white solid plastic seat and lid DSR NO. 17.3.1 |
| 12 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS : 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings ofcomposite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge. 1620 (20 mm OD) pipe DSR NO. 18.1.2 |
| 13 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.As per DSR item no 10.16.03 page 226 |
| 14 | Brick on edge pavement with straight over burnt brick on parties with bricks, laid dry joints filled with fine sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. ( 3 /8^ prime prime ) depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work.ITEM NO-763 Please Enable Macros to View BoQ information |
