|
| 1 | Supply & fixexhaust fans steel body AC single phase 230/ 240 V of size 450 mm sweep with louver complete all as specified and directed by Engineer-in-Charge.Note:- Cost of making hole for Exhaust fan of required size at site is deemed to be included in quoted rates. |
| 2 | Supply & fixexhaust fans steel body AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed by Engineer-in-Charge.Note:- Cost of making hole for Exhaust fan of required size at site is deemed to be included in quoted rates. |
| 3 | M & L for Point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and includingproviding PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed by Engineer-in-Charge.One Exhaust Fan point controlled by one switch |
| 4 | All as per item No 03 here-in-before One light point controlled by one switch |
| 5 | All as per item No 03 here-in-before One Ceiling Fanpoint controlled by one switch |
| 6 | All as per item No 03 here-in-before One 3 pin socket outlet, 5 Amp independent |
| 7 | All as per item No 03 here-in-before One 3 pin socket outlet, 5 Amp on the same board with other switches |
| 8 | All as per item No 03 here-in-before One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size |
| 9 | All as per item No 03 here-in-before but wiring with cables of size 2.5 sqmm for wiring & cables of size 2.5 sqmm both (FRLS) as continuous earth wire for one 15 Amps, 3 pin Switch/Socket outlet on Independent board complete all as specified and directed by Engineer-in-Charge. (Note : cutting chases & making good of disturbed surfaces shall be measured and paid separately). |
| 10 | M&L for sub main wiring drawing through PVC casing and capping with Wiring alongwith earth wiresize2x2.5 sq. mm +1 x2.5 sq. mm earth wire earth wireof FRLS is PVC insulated copper conductor, single core cable in surface/recessed as required .Note:-Two run of 2.5 sqmm wire and Onerun of 2.5 sqmm wire and One run of PVC casing caping will be measured as one running meter. |
| 11 | M&L for sub main wiring drawing through PVC casing and capping with Wiring alongwith earth wiresize2x1.5 sq. mm +1x1.5 sq. mm earth wire earth wireof FRLS is PVC insulated copper conductor, single core cable in surface/recessed as required .Note:- Three run of 1.5sqmm wire One run of PVC casing caping will be measured as one running meter. |
| 12 | Supply and fixing SPN 32 amp rating 240V, 10KA \"C\" curve miniature circuit breakerin the MCB DB complete with connection testing and commissioning |
| 13 | Supply and fixing SP 32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning |
| 14 | S&F in replacemen MCB DB SPN 4 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surfaceall as specified and directed by Engineer-in-Charge. Make: Havells QVE series or equivlent legerend/standard/indoasian |
| 15 | Supply and fid sheet metal enclosure double door for DB 8 way |
| 16 | Supply and fid sheet metal enclosure Singhl doorfor DB 2 way |
| 17 | Supply and fid sheet metal enclosure double door for DB 12 way |
| 18 | Taking down carefully unserviceable aluminium/copperpoint wiring (light, fan, socket or power)including unserviceablelight fittings, switch board complete,switch sockets, ceiling roses, pendants, regulators, sockets, etcandremoving materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engineer-in-Charge. |
| 19 | S & F switch piano, 5 Amp, single pole, flush type one way 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 20 | S & F socket out let, 2 in 1, 3 pin,5 Amps, 240 volts complete all as specified and directed by Engineer-in-Charge. |
| 21 | S & F Switch socket combination, 2 in 1,5 Amps,flush type, 240 volts complete all as specified and directed by Engineer-in-Charge. |
| 22 | S & F Switch socket combination, 5 in 1, 5/15 Amps, 240 volts, flush type complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F Buzzer, Ding Dong AC, 230 Volts single pole. |
| 24 | S/F switch bell push, flush type 5 Amp. |
| 25 | S & F Ceiling rose, 3 way PVC insulated bodycomplete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for sub main wiring drawing through PVC casing and capping with Wiring alongwith earth wiresize2x4 sq. mm +1x4 sq. mm earth wire earth wireof FRLS is PVC insulated copper conductor, single core cable in surface/recessed as required . |
| 27 | M&L for Earthing complete with galvanizedsteel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer-in-Charge by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc |
| 28 | Supply, laying & testingcable XLPE insulated, screened, PVC bedded, galvanizedsteel strip or wire armoured, electric power cables(heavy duty)with stranded aluminium conductor,1100 volts grade, of size 2 core 10 sq mm.Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as directed by Engineer-in-Charge |
| 29 | Supply and fixing 415V 10KA \"B\" curve miniature circuit breaker (MCB) of 4POLE 40Amp in the DB complete withconnection testing and commissioning |
| 30 | S&F MCB SP 5-32 Amp single pole 230V 10 kA \"C\" curve, as per site requirement, complete all specified and directed by Engineer-in-Charge |
| 31 | S&F MCB SPN 6-32 A, 240V 10kA C curve complete all as specified and directed by Engineer-in-Charge |
| 32 | S&F MCB DP 32 Amp double pole 230V 10 kA \"C\" curve, as per site requirement, complete all specified and directed by Engineer-in-Charge |
| 33 | M&L for MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA and deposit the old MCCB to MES Store. |
| 34 | S&F Fan step regulator, 120W - 2 module |
| 35 | M&L for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep. |
| 36 | M& L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw. Note- the job includes cutting of existing earthing strip and joining them using GI Strip mentioned in Ser 2 and nut and bolt |
| 37 | Supply and fix earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25 x 4 mmgalvanised iron strip |
| 38 | Supply and fix Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V |
| 39 | Supply and fix GI tubes 25mm dia, \"light grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors |
| 40 | Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp |
| 41 | Supply and fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. |
| 42 | Supply and fixing ceiling fans complete with blades, down rods,and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) (Make Havells Efficiencia DX BLDC FHCEO5SWHT48) |
| 43 | Supply and fix in replacement of recessed mounted LED panel light 2\"x2\" size, 36 watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified. |
| 44 | Supply, installation, testing and commissioning of LED Post Top Gate Light, suitable for outdoor decorative lighting, with high efficiency energy saving LED lamp of40W , IP65 or higher protection, pressure die-cast aluminum housing with corrosion resistant powder coating, UV stabilized polycarbonate diffuser for uniform light distribution, operating on 230V ±10% AC supply, complete with necessary driver, mounting accessories and all required hardware, fixed on existing/new pole as directed by Engineer-in-Charge. The work shall be executed in a neat and workmanlike manner to the satisfaction of the Engineer-in-Charge (Make bajaj BRIL40WLEDWW) |
| 45 | Supply, installation, testing and commissioning of LED Bollard Light, suitable for pathway and landscape lighting, made of pressure die-cast aluminium housing with corrosion resistant powder coating, IP65 or higher protection, UV stabilized polycarbonate diffuser for glare-free uniform illumination, integrated high efficiency LED lamp of wattage not less than 15W, complete with electronic driver, operating on 230V ±10% AC supply, mounted on suitable foundation bolts with all required accessories and connections as directed by Engineer-in-Charge. (Make BAJAJ TLLUM15W 30K80C3GWS) |
| 46 | Supply and fix in replacement of recessed mounted LED panel light 105MM X 105MM size, 9W watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid /PVC panel false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified. |
| 47 | Supply and fixing of 20 Watt LED 6500 K (PRIDE PLUS)inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make:-LHEXACP7FN1W020 HAVELLS/ Shakti/Philips. |
| 48 | Supply & fixexhaust fans AC single phase 230/ 240 V of size 200 mm sweep with louver complete all as specified and directed by Engineer-in-Charge.Note:- Cost of making hole for Exhaust fan of required size at site is deemed to be included in quoted rates. (Make BAJAJ MAXIMA DXL-G02) Old UNSV exhaust fan to be deposited in MES Store |
| 49 | Supply and fixing ceiling fans complete with blades, down rods,and accessories, 230 V, 1200 mm sweep, 350RPM. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote (Make Bajaj Energos 26251143) |
| 50 | Supply and fixing wall mounted fans complete with accessories and double string for speed and rotation control, 240 V, 400mm sweep. (Make Bajaj ESTEEM 250552) |
| 51 | Supply and fix Inbuilt sensor based smart LED auto dimmable batten 4ft Alu, made from powder coated extruded aluminium housing, opaque glare free diffuser, prewired with all accessories. Option of engineering grade extruded polymer housing available . Dimming from 100% of rated wattage to 30% on sensing of movement. Make Shakti SZSLAMX020-iSS or equivalent. |
| 52 | Supply and errectof High intensity, auto revoling, multy directional, long beam, LED search light 1x300 watt, multy ckt SMD, Focus range 800 meter, CCT 5500K, LM6 body dia >440mm operating voltage: 90V- 30V, 50hz, PF > 0.95, THD <10%, CCT: 5500K, CRI >70, Optics used- PMMA/PC lens,narrow beam 7 degree, average lux level at 10 meter > 9000 with circle of approx 1meter, toughened clear glass with silicaon gasket, over volt / under volt & short circuit protected, confirming to LM79, LM80, IK07, IP66, lux report, Type tested as per IS:10322, IS:15885 and B.I.S. certifiedsearch-light should be installed on rotating disc of revolving mech to rotate 360˚ over night in horizontally and tiltable upto 45 deg. vertically.. wall mounted wired control panel (consist of MCB\"s, V-meter, Fuse, LED indicator) with inbuilt features of speed controller (1 to 10 rpm), Auto / Manual, Reverse / Forward, Up / Down The revolving mechanism is fully covered with weather & rust proof die cast fiber box cat number : MRSL-LRFLL-25PC30 , Make: Kalin complete all as specified and as directed by Engineer-in-Charge. |
