|
| 1 | M&L for preparation of old polished surface of following wooden furniture article by emery paper to get the surfaces smooth with filling of putty where ever required and applying two coat of french polish high glossy as directed by Engr-in-Charge. Bed plywood top (Drg No: FD-246) |
| 2 | Book case wooden (Drg No: FD-237) |
| 3 | Chair dining (Drg No: FD-228,279) |
| 4 | Chair dining (Drg No: FD/E6/MAP/10,FD/MAP-II/04) |
| 5 | Chair easy(Drg No: FD-201,229) |
| 6 | Chair writing (Drg No: FD-250,280) |
| 7 | Hat stand with mirror (Drg No: FD-233) |
| 8 | Peg table (Drg No: FD-236, 277,384) |
| 9 | Sofa set 05 seater(Drg No: FD-281,373, FD/MAP-II/02) |
| 10 | Sofa set 04 seater(Drg No: FD-281,373, FD/MAP-II/02) |
| 11 | Table centre (Drg No: FD-235,274) |
| 12 | Table dining for 06 persons (Drg No: FD-273,FD/MAP-II/03) |
| 13 | Table dining for 08 persons (Drg No: FD-273) |
| 14 | Table 3\" x 2\" with/without drawer (Drg No: FD-223,224,283,284) |
| 15 | Table 3\" x 3\" with sunmica top (Drg No: FD-291) |
| 16 | Table writing (Drg No :FD-249,275) |
| 17 | Table dressing gents with mirror (Drg No: FD-230,379) |
| 18 | Table dressing ladies with mirror (Drg No: FD-251,378) |
| 19 | Teapoy wooden (Drg No: FD-232,278,382) |
| 20 | M & L for Preparation of old painted surfaces of the following steel furniture article including removal of dent etc to get the surfaces smooth by applying of puttywherever necessary andPainting with one coat of synthetic enamel paint with spray gun(Mandatory) as per existing colour and all as specified and directed by Engr-in-Charge.Almirah med steel (Drg No: FD-67M,1032 ) |
| 21 | Almirah large steel (Drg No: FD-67M,1031) |
| 22 | Rack shoe steel (Drg No: FD/E6/MAP/02 (R) |
| 23 | Locker bed side steel (Drg No: FD-257,1029,TP) |
| 24 | Book case steel open large (Drg No: FD-69) |
| 25 | Rack steel (Drg No: FD-106,TP,similar pattern) |
| 26 | Bed hard steel (Drg No: FD/E6/MAP/08(R) |
| 27 | M&L for re-canning of \"CHAIR VERANDAH\" using 4 mm wide half round plastic cane of pale cream / white colour of superior quality in mat design including removal of old plastic cane and including preparation of old painted surface of chair frame and applying two coats white synthetic enamel paint all as specified and shown in drg and as directed by Engr-in-Charge. (Drg No FD-359) |
| 28 | Supply and fix in repair hard rubber shoeto chair verandah/chair verandah steel. |
| 29 | M&L for Removing the existing worn-out cane and Recanning of furniture chairs uising 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-in-Charge. (Drg No FD-228,279,201,229,250,280, similar pattern) |
| 30 | Almirah large steel (FD-1031) :- Overall size shall be all as shown on drawing. It shall be made of 20 gauge thick mild steel sheet. The almirah shall have four shelves equally spaced five compartments. The almirah shall have one normal handle 120 mm long having three way locking system with proper workmanship. All joints and welding, fixing shall be done according standard workmanship.Rest all as per drg.Make of Lock :- Link/Godrej/Harrison.Finish & Paint :- All steel surfaces exposed to viewwhen placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab. |
| 31 | Bath Stool PVC (FD/E6/MAP/07) : - Overall size shall be all as shown on drg. Make- Amko or equivalent |
| 32 | Bed hard (FD/E6/MAP/08 (R) :- Overall size shall be all as shown on drg. All steel shall be rectangular MS pipe of 18 gauge thick. The head board shall be 800 mm high and foot board shall be 500 mm high. The head and foot board shall be provided with 18 mm thick MDF board exterior grade BSL (Colour and shade as approved by GE). 2 mm thick PVC half round edge beading without joints shall be provided all around . The top of bed hard shall be 12mm thick BWR densified film face shuttering plywoodall layers glued shall be provided as shown on drg. All joints and welding, fixing shall be done according standard workmanship. Rest all as per drg.Make of Plywood : Archidply/Century/Green Ply/KitplyFinish & Paint :- All steel surfaces exposed to viewwhen placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab. |
| 33 | Bin linen multipurpose(FD/E6/MAP/09):- The sides, partitions, shelves, drawers of the bin linen shall be made of 18 mm thick MDF exterior grade BSL (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided as per drg.The back of the bin linen shall be of 12mm thick commercial BWR grade densified film face shuttering plywoodall layers glued . Shutters shall be provided with magnetic catchers. In addition wooden base frame to be provided with 925 mm long rail of size 25x40 mm both sides, 300 mm short rail of size 25x40 mm both side and 45x45 mm legs to each cornersat 75 mm height as directed by Engr-in-charge. Rest all as per drg.Polish & Finish:- All wood surface shall be Melamine polished with high glossy finish. |
| 34 | Chair writing (FD/E6/ MAP/12) :-The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.12mm thick hot pressed BWR plywood upholstered with superior quality fabric as approved by GE and moulded polyurethane foam of approved make with PVC lipping alround shallbe provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.All joints and welding, fixing shall be done according standard workmanship. Rest all as per drg.Make of cushion:- Sleepwell/Kurlon/Godrej interio Finish & Paint :-All steel surfaces exposed to viewwhen placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab. |
| 35 | Chair executive revolving high back :- (TP) High back chair in black colour with leather padded wooden arms and mechanism. Size of chair 660 mm (L) x 500 mm m(D)x 1265 mm (H) Make : Durain (HOPE/HB) or equivalent in Godrej or equivalent in Methodex |
| 36 | Chair dining (FD/MAP-II/04) :- Overall size shall be all as shown on drg.All wood shall be first class teak wood.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiffners of size 20mmx25mm three in nos shall be fixed as specified in drg.75x75x25 teak wood stopper shall be fixedwith main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of foam covered with approved tapestry cloth shall be fixed over 12mm thick BWR plywood as specified in drg.Side frame of back of the chair shall be ofsection 40x50mm.Four teak wood vertical stiffnersof section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffersshall be provided to bottom of all legs.Rest all as per drg.Make of cushion:- Sleepwell/Kurlon/Godrej interio Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. |
| 37 | Hat stand with mirror (FD-233) :- Overall size shall be all as shown on drawing. All wood shall be of Ist class well seasoned teak wood. The Frame of Hat Stand shall be provided with 4mm thick teak ply in front (one side teak face). The back of Hat Stand shall provided with 4mm thick commercial BWR plywood. A mirror of 440mm high and 300mm wide,free from all distorition and defects shall be provided on right hand side of Hat Stand. four brass pegs of 75mm wide and 120mm high of shape as approved by GE shall be fixed on left side of mirror. Rest all as per drg.Make of mirror : Modigaurd/ Swastik/Saint gobin Polish & Finish:All wood surface shall be Melamine polished with high gloss finish. |
| 38 | Table peg (FD-384):- Overall size shall be all as shown on drg.All wood shall be first class MP teak.The top shall be of 18 mm thick MDF board exterior grade BSL (Colour and shade as approved by GE). 4 mm thick half round teak wood beading without joints shall be provided all round the top of table.280 mm long of two Nos short rails of size 20x40 mm to be provided at top and centre rail of size 20x50 mm shall also be provided lengthwise at centrein between the side bottom rails as directed by Engr-in-charge. Hard rubber/PVC shoe shall be fixed to the bottom of all legs as per drg.Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. |
| 39 | Receptacle PVC (FD/E6/MAP/13) :- Overall size shall be all as shown on drawing. The receptacle shall be of capacity 20 ltrs. The body of receptacle PVC shall be made up of thick polymer plastic of thickness not less than 2.5mm, providedwith swivel lid and handles on both sides as shown in drg. Make -Cello, Tupperware, Amko or equivalent as shown in drg. |
| 40 | Rack shoe steel (FD/E6/MAP/02) :- Overall size shall be all as shown on drg.The frame shall be 25 mm dia MS pipe with 18 gauge wall thickness.MS rod shall be welded to 20 mm dia MS pipe of 18 gauge thick.Rest all as per drg and as directed by Engr-in-charge.Finish & Paint: All steel surfaces exposed to viewwhen placed in position shall be powder coated (colour as approved by GE) in seven tank process.The test certificate for powder coating is to be submitted through NABL accredited Lab. |
| 41 | Side board (FD-1112) :- Overall size shall be all as shown on drg. 18 mm thick MDF exterior grade BSL (Colour and shade as approved by GE) shall be provided at top and sides (Colour and shade as approved by GE). Four drawers shall be provided equally in this space and telescopic channel to be provided to each drawer as directed by Engr-in-charge.The shutters shall be of 18 mm thick MDF board exterior grade BSL with 4 mm thick half round TW beading without joint shall be provided alround the front shutters and front of shelves. All drawers and shutters shall be provided with one handle each of powder coated mild steel and 100mm long. In addition wooden base frame to be provided with 925 mm long rail of size 25x40 mm both sides, 300 mm short rail of size 25x40 mm both side and 45x45 mm legs to each cornersat 75 mm height as directed by Engr-in-charge. Rest all as per drg.Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. |
| 42 | Sofa set 05 seater with cushion (FD-281) :- Overall size shall be all as shown on drawing.All wood shall be of first class well seasoned teak wood (MP).The cushion shall be of size 4\" and of 40 density as approved by GE. Cushion shall be covered with best quality tapestry cloth not less then Rs. 250/Mtr and as apporoved by GE. PVC hard rubber shoes of 25 mm dia shall also be provided to bottom of all legs with 20 mm long screws.Rest all as per drg.Make of cushion: Sleepwell/Kurlon/Featherlite/Godrej interio Polish & Finish:-All wood surface shall be Melamine polished with high gloss finish. |
| 43 | Sofa set 04 seater with cushion (FD-281):- Overall size shall be all as shown on drawing.All wood shall be of first class well seasoned teak wood (MP).The cushion shall be of size 4\" and of 40 density as approved by GE. Cushion shall be covered with best quality tapestry cloth not less then Rs. 250/Mtr and as apporoved by GE. PVC hard rubber shoes of 25 mm dia shall also be provided to bottom of all legs with 20 mm long screws.Rest all as per drg.Make of cushion: Sleepwell/Kurlon/Featherlite/Godrej interio Polish & Finish:-All wood surface shall be Melamine polished with high gloss finish. |
| 44 | Teapoy (FD-382) :- Overall size shall be all as shown on drg.All wood shall be first class MP teak.Top shall be of 18 mm thick MDF board exterior grade BSL (Colour and shade as approved by GE) and 4 mm thick half round teak wood beading without joints shall be provided all around of top.390 mm longof two Nos short rails of size 30x50 mm to be provided at top and centre rail of size 30x50 mm shall also be provided lengthwise at centre in between the side bottom rails.Hard rubber/PVC shoe shall be fixed to the bottom of all legs. Rest all as per drg.Polish & Finish:-All wood surface shall be Melamine polished with high glossy finish. |
