|
| 1 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness(below or above ground level) complete . |
| 2 | M&L 100 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed. |
| 3 | M&L for 25 mm thick Sand cushion under floors complete all as specified and as directed. |
| 4 | M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cementpigment, confirming to IS 15658-2006of 60 mm thickness M 35 Grade complete all as specified and as directed. |
| 5 | M&L 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed. |
| 6 | M&L for coloured cement concrete chequered tiles 20cmx20cmx25 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors incl screed bed 1:6 CM 15mm thick complete all as specified and directed. |
| 7 | M&L PCC 1:2:4 type B-1 (using20 mm graded stone agg) as in coping ,edging & other similar work including necessary form work complete all as specified. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 9 | Rolled sections as in main and cross beams, hip and jack rafters; purlins of Fe 410 W (gde- E-250) quality Awhere connected to common rafters and and connecting platesguides for sliding doors; fixed with angle cleats or otherrunning rails |
| 10 | Prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 11 | Excavating in post holes(or similar holes) each n exc 0.5 Cum getting outin layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50m and making good surface complete |
| 12 | PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundations filling and mass concrete etc complete |
| 13 | Dismantling of Asbestos cement (corrugated , semicorrugated , etc.) sheetsas in roof coverings. |
| 14 | S& F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 15 | Material and labour for Cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof padding, laid to slopes, surface finished even and smooth without using extra cement average thickness of concrete 50mm complete all as specified and directed. |
| 16 | Material and labour for 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, includingcleaning the roof top by water etc all as specified and directed. |
| 17 | Supply and applying high built elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of waterpressure as per DIN 1048, min 88% solid content. The system includes cleaning of surface and made free from dust for final base preparation, epoxy primer 1: (resin: harder) application with 100% water dilution and pure polyurethane applicationin 2 coats with a tortal min consumption of 1.25 kg per Sqm. Applicationshouldbe done with Graco sprauer by a company authorised applicator |
| 18 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removingrubbish outsideMD land complete all as specified |
| 19 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.. |
| 20 | M&L for Non skid ceramic coloured 7 to 8 mm thick area of each tile exc 0.11 sqm but n.exc 0.18 Sqm on vertical surface such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white orcoloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4) complete all as specified and directed. |
| 21 | M&L for non skid ceramic tiles/ non skid tiles coloured 7 to 8 mm thick area of eachtile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile,including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed. |
| 22 | M&L for glazed ceramic coloured tiles of size 450x300x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plasterin cement mortar 1:4 finished rough to fix tiles complete all as specified and directed. |
| 23 | S&Fbib taps, cast copper alloy,fancy typechromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 24 | S&Fstop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed . |
| 25 | S&F angle cock/stop valves 15 mm nominal bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, fancy type,chromium plated,complete all as specified and directed . |
| 26 | S&F 125 mm size Brass chromium plated shower roses withswivel joints, including fixing to steel pipe or union complete, fixed in repair,all as specified and directed. |
| 27 | S&F pillar taps, brass, with capston heads, fancytype, chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and flynuts screwed for 15mm bore iron pipe andfixed in repair, complete all as specified and directed. |
| 28 | S&Fbrass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified. |
| 29 | S&Ftubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified. |
| 30 | S&F in repairs bevelled edge looking mirror of selected quality glass, 5.5 mm thick of size 450 x 600 mm,PVC moulded case mounting on 6 mm thick AC building board or commercial ply wood on back and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs, complete all as specified and directed |
| 31 | S&F in repairvitreous china wash hand basin, white,flat back size 550 x 400 mm including one number brass CP waste coupling, 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 32 | S&F for 32 mm bore size waste coupling for WHB etc with PVC capcomplete fixed in repairs all as specified. |
| 33 | S&Fof any dia PVC waste pipe for WHB, complete all as specified. |
| 34 | Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified. |
| 35 | S&F galvanised steel water tubes \"medium grade\", 15 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed |
| 36 | S&F 1000 ltrrotational moulded polythene water storage tankcylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description,complete all as specified and directed. |
| 37 | S&F 20 mm boreBall valve high pressure of PTMTwith epoxy coated Aluminiumrod& high density plastic ball screwed for iron pipe and fixed.(Minimum weight25mm-455gms)complete,fixed in repairs, all as specified. |
| 38 | Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store. |
| 39 | S & F 110 mm PVC (SWR) pipessingle socketed in any length with rubber joints fixed to wall or laid in floors/trenches with & including existing/new MS stack clamps of FI 50X3mm, complete all as specified and directed |
| 40 | S & F 75 mm PVC (SWR) pipessingle socketed in any length with rubber joints fixed to wall or laid in floors/trenches with & including existing/new MS stack clamps of FI 50X3mm, complete all as specified and directed |
| 41 | S & F110 mmPVC (SWR) branch pieces (Tee) with cement joint complete all as specified and directed |
| 42 | S & F75 mmPVC (SWR) branch pieces (Tee) with cement joint complete all as specified and directed |
| 43 | S & F 110mm bore PVC(SWR)bend/shoe of any radius,with cement joint complete all as specified and directed. |
| 44 | S & F 75mm bore PVC(SWR)bend/shoe of any radius,with cement joint complete all as specified and directed. |
| 45 | Taking down cement plaster on brickwalls etc including Rcking out joints hacking to key scrubbing down with water etc , complete all as specified and directed by Engr-in-Charge |
| 46 | M&L renderingon concrete/brick surfaces 15mm thick in CM 1:4 (externally) finished even and fair without using extra cement including water proofing compound complete all as specified and directed (Water proofing compound should be paid seperately) . |
| 47 | Supply only of integral water proofing compound. |
| 48 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint , complete all as specified and directed. |
| 49 | M&L rendering 15 mm thick in CM 1:6 on concrete surfaces finished surface even and smooth without using extra cement complete all as specified and directed. |
| 50 | M&L for prepration of newly plastered surfaces of walls including cornicespilasters etc and applying two coat of oil Emulsion Distemper(OBD) over a coat of priming surfacecomplete all as specified. |
| 51 | M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces finished surface even and smooth without using extra cement as in ceiling surfaces complete all as specified and directed. |
| 52 | M&L for preparation of newly plastered surface of ceiling including cornices pilasters etc.and applying three coat of white wash on ceiling complete all as specified and as directed. |
| 53 | Taking down chowkhats or frame with shutter without taking off shutter from the frame areaexc 1.5Sqm but n exc 4.0 sqm each and removal to store complete all as specified |
| 54 | Taking down shutters of exc 1.00 sqm but n. exc 2.00 sqm each, complete all as specified and directed. |
| 55 | S&F 35 MM thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated complete all as specified. |
| 56 | S&F 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.23 (a) of SSR Part-I. |
| 57 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 58 | M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 59 | S&F 100mmsizeMSbutthingesmediumweightcoldrolled (zinc cromate)., complete all as specified and directed. |
| 60 | Supply and fixing MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed. |
| 61 | Material and labour mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 62 | Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed. |
| 63 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller platecomplete all as specified and directed. |
| 64 | Supply & fixed floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel springfixed to dooroverall length of cover plate 140mm complete all as specified |
| 65 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings with waterproofing compund.complete all as specified |
| 66 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 67 | Preparation of old steel surfaces of any description over 10cm width or girth and applying twocoats of synthetic enamel paint with red oxide zinc chrome primer complete all as specified and directed. |
| 68 | S&F Framed work as in doors or gates of angle or other sectionwith gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) complete all as specified and directed. |
