|
| 1 | Taking down Chowkats or frames , window any typenot exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame) any height and any locationcomplete all as specified and directed by Engr-in-Charge. |
| 2 | Taking down chowkhat or frames, window any type with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqmcomplete all as specified and directed by Engr-in-Charge. |
| 3 | Material & labour for powder coatedaluminium window/ventilators with double side hungshutter forglazing and gauging and frame with one or more rebates made outanodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminiumbeading screws, type B20 100mm long suitable handle and anodised aluminium fittings such asstay, hinges glazing with 5.0 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm apperture except fixed glazing (FG) all as specified and directed. (Tint of glass shall be approved by GE ,5mm thick glass sheet glass ortinted glassappx 0.70 Sqm And wiremesh appx 0.70 Sqm included in this item).complete all as specified and directed by Engr-in-Charge. |
| 4 | Material & labour for powder coated aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mmmade out of standard aluminium moulded section of size 4.4 mm x 7mm incl C section beading for opening window panels bottom and top of window 4 Nos opening both side of middle section of window frame inbult to prevent any injury while opening window panels complete all as specified and directed by Engr-in-Charge. |
| 5 | Repairs to aluminium window shutters of any descriptioneasing & adjusting without taking downarea exc 1 sqm but n. exc 2 sqm incl repairs to lock , roller,glass wool,rubber biddings, refixing wiremesh excl glass etc complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply & fix framed work as in doors frame orgates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing with hold fast complete all as specified and directed by Engr-in-Charge. |
| 7 | Taking down shutters of any descriptionexc 1 sqm but n exc 2 sqm each complete all as specified and directed by Engr-in-Charge. |
| 8 | Supply & fix 30 mm thick flush shutters, solid core construction, with Block board core and plywoood face panels,commercial type on both sides with one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply & fix 30mm thick 2nd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reoundedmiltred and related sash bars number to received glass gauze etc edges of framingplain chamfered or reounded fitted with cutand mitred beads for securing glass etc size of members of shutters as specified inSSR Part-I section 8 clause 8.20(a)supplied and fitted to chawkats complete all as specified and as directed byEngineer-in-Charge. |
| 10 | Supply & fix in repairs 30mm thick 2nd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reoundedmiltred and related sash bars number to received glass gauze etc edges of framingplain chamfered or reounded fitted with cut,inclboth side laminations,and mitred beads for securing glass etc size of members of shutters as specified inSSR Part-I section 8 clause 8.20(a)supplied and fitted to chawkats complete all as specified and directed by Engineer-in-charge. |
| 11 | Supply & fix in repais stainlesssteel wire cloth 0.40 to 0.76mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed by Engr-in-Charge. |
| 12 | Material & labour for solid PVCdoor frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing incl hold fast, will be painted to match with printed sheed complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply & fix factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed byEngineer-in-Charge. |
| 14 | Material & labour for preparation of new steel surface not otherwise described and applying two coats of Synthetic enamel paint over a coat red oxide primer complete all as specified and directed by Engineer-in-charge. |
| 15 | Demolition of precast concrete block walling of any description built in cement mortar complete all as specified and as directed byEngineer-in-Charge. |
| 16 | Material & labour for precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:3:6) 20mm graded stone aggregate and setting in cement mortar 1:6 incl toothing & backing for old and new wall etc complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material & labour for stone masonary, block masonary or brick masonary cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and as directed byEngineer-in-Charge. |
| 18 | Material & labour for cutting holes into or through brick, block masonary walls exc 150 Sq cm but n exc 400 Sq cm built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l complete all as specified and directed by Engineer-in-charge.. |
| 19 | Material & labour for cutting openings, through brick walls, block masonary wallfor door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core,etc.. to store and rubbish not exc. 50m complete all as specified and directed by Engineer-in-charge.. |
| 20 | Material & labour for forming jambsin Cement mortar 1:4 etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work,also facing, jointing and pointing to match existing work complete all as specified and directed by Engr-in-Charge. |
| 21 | Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc any height any location upto 12m height with scaffolding etc complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material & labour for 10 mm thick rendering in CM 1:6 onconcrete surfaces / fair faces of brick masonary wall, finishedeven and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge |
| 23 | Material & labour for applying two coats of oil bound distemper over a coat of primer on previously untreated surfaces of wall including preparation complete all as specified and directed by Engr-in-Charge. |
| 24 | Material & labour for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3% by weight of cement including 10m height steel scaffoldingcomplete all as specified and directed by Engr-in-Charge.[Note:- WPCshall be measured and paid separately ] |
| 25 | Supply of integral water proofing compoundcomplete all as specified and directed by Engr-in-Charge. |
| 26 | Material & labour for preparing new plaster surfaces of walls applying one coat of weather coat primer and two coats of weather proof acrylic emultion paint all as per manufacturers instructions and directed including 12m height steel scaffolding complete all as specified and directed by Engr-in-Charge. |
| 27 | Material & labour for preparation of old plastered or unplastered washing, rubbing down painted surfaces of walls and applying one coat of distemper oil emulsion over primer ( as approved by GE) complete all as specified and directed.After Perodical serviceof the Qtr/building the contractor will clean all the paint marks from glass panes , electric switch boards and fittings , doors windows and should clean the floor , dado and all scraped material debris shall thrown away MOD land complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material & labour for preparation of oldplastered or unplastered washing, rubbing down painted surfaces of ceiling and applying two coats of white washcomplete all as specified and directed. After perodical serviceof the Qtr/building the contractor will clean all the paint marks from glass panes , electric switch boards and fittings , doors windows , should clean the floor , dado and all scraped material, debris shall thrown away MOD land complete all as specified and as directed byEngineer-in-Charge. |
| 29 | Material & labour for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying two coats of damp proof paint complete all as specified and directed by Engineer-in-charge. |
| 30 | Material & labour for complete removalof existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying Two coat of weatherproof acrylic emultion paint over one coat of primerall as per manufacturers instructions and directed including scaffolding any height complete all as specified and directed by Engineer-in-charge. |
| 31 | Material & labour for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and applyone coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 32 | Supply & fix door sliding bolt aldrop 250 mm long aluminium anodised complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply & fix in repair mild steel 300mm ordinary rat tail rod pettern springs including roller and roller platec complete all as specified and as directed byEngineer-in-Charge. |
| 34 | Material & labour for 25 x 3mm flat iron holdfasts complete all as specified and directed by Engineer-in-charge. |
| 35 | Supply & fix stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame including taking down old hinges complete all as specified and directed by Engineer-in-Charge |
| 36 | Supply & fix 150 mm size of handleextruded aluminium alloy handle febricated type anodised complete all as specified and directed by Engineer-in-charge. |
| 37 | Supply & fix ialuminium andodized, 150mm length of bolt barrel tower bolts ofextruded section complete all as specified and directed by Engineer-in-Charge |
| 38 | Material & labour for prepartion newwooden surfaces ofany description, not otherwise described over 10cm width or girth andapplying two coats of synthetic enamed paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge.. |
| 39 | Supply & fix in repairs double action floor spring hydrauilically regulated made up of minimum 1.25 mm thick aluminium alloy sheeet foundationbox, main body with stainless steel cover governing pivotmade of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-charge.. |
| 40 | Supply & fix in repairsbrassmortice lock, vertical type, size 100 mm , 4 levers with 2 keys complete all as specified and directed by Engineer-in-charge.. |
| 41 | Supply & fix floor door stoppers of aluminium alloy body andtoungue anodized with hard drawn steel spring over all length 140mm complete all as specified and directed by Engineer-in-charge.. |
| 42 | Material & labour for floor door stopper 150mm long , of brass body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-charge.. |
| 43 | Supply & fix hat pegs brass, solid body, 125mm to 175 mm etc complete all as specified and directed by Engineer-in-charge.. |
| 44 | Demolition of unreinforced concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) removing debris outside MOD land complete all as specified and directed by Engineer-in-charge.. |
| 45 | Material & labour for 75 mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection finishing even and smouth without using extra cement complete all as specified and directed by Engineer-in-charge.. |
| 46 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge. . |
| 47 | Material & labour for screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed by Engineer-in-charge. . |
| 48 | Material & labour for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles0.36 sqm in flooretcset and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-charge. . |
| 49 | Material & labour for light shade vetrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in skirtingetcset and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-charge. . |
| 50 | Material & labour in repairs for 18-20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), gates,Window cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded, making groves, moulding , using partation in self etc complete all as specified and directed by Engineer-in-charge.. |
| 51 | Supply & fix in repairs 5.5 mm thick glass,looking mirror size exc 0.5 Sqmandnot exc 3 Sqm of selected quality glass, mounted on 10 mm thick commercial plywoodwith chromium plated brass screws/ Bracketsincluding taking down old looking mirror complete all as specified and directed by Engineer-in-charge.. |
| 52 | Material & labour for providing and fixing powder coated aluminium (minimumthickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,Aluminium composite panel,C.P. brass/ stainless steel screwsr complete all as specified and directed by Engineer-in-charge.. |
| 53 | Supply & fix 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lappingin square not exc 0.58 Sqm each in each pane complete all as specified and directed by Engineer-in-charge.. |
| 54 | Supply & fix 3 mm thick Figure glass/ tinted glass ordinary quality and glazing with oil putty/wooden lappingin square not exc 0.58 Sqm in each pane, lovers etc complete all as specified and directed by Engineer-in-charge.. |
| 55 | Supply & fix 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work complete all as specified and directed by Engineer-in-charge.. |
| 56 | Taking up or down steel tubing and connection incl cleaning for refixing of the following bore of pipe complete all as specified and directed by Engineer-in-Charge of following sizes:- |
| 57 | 15mm bore |
| 58 | 20mm bore |
| 59 | 25/32mm bore |
| 60 | 40/50mm bore |
| 61 | Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cementcomplete to walls consealed in wall making grove in wall etc and ceilings or laid in floors of following sizes: (SDR-13.5 complete all as specified and directed by Engineer-in-Charge of following sizes:- |
| 62 | 15mm bore |
| 63 | 20mm bore |
| 64 | 25mm bore |
| 65 | 32mm bore |
| 66 | 40mm bore |
| 67 | Material & labour for in repair anodised aluminium snap gridsize of grid 605mm x605mm frame work made out of 0.5mm thick GI tee 32x24mm for main, 25x44mm for cross tee and 20x20mm angle fixed on wall , powder coated finish on exposed faces of tee and angle , hung from ceiling using 2mm thick GI suspension wires spaced of 1200mm on main runners for anytype POPfalse ceiling complete all as specified and directed by Engineer-in-charge.. |
| 68 | Material & labour in repair 10mm thick plaster of paris ceiling(Gypsum anhydrous) to flat ,curved and raised mouldingentricate design surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wiremeshincl 2mm thick putty and Oil bound distemper2 coats complete all as specified and directed by Engineer-in-charge.. |
| 69 | Material & labour in repair 10mm thick and Girth 120mm ,plaster of paris ceiling (Gypsum anhydrous) to flat ,curved and raised mouldingentricate design ,surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wiremesh complete all as specified and directed by Engineer-in-charge.. |
| 70 | Supply & fix in repairs stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm to 100 mm dia pipe complete all as specified and directed by Engineer-in-charge.. |
| 71 | Material & labour for in repairs for anodised aluminium snap grid frame work of size (605mm*605mm ) for false ceiling & Hangers 6mm dia. G.I. (upto 1200 mm length) size of grid (605mm*605mm ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.Flat 40*3 mm size 60 mm long and expansion hold fastners 12.50mm dia. 40mm long completeincl taking down any electric wiring, cables and refixing into same without any damage etc complete all as specified and directed by Engineer-in-charge.. |
| 72 | Supply & fix PVC insulation pannels 10mm thick with EPS stuck to 1mm printed PVC sheet used in lieu of plain PVC sheet placed in false ceiling grid made of Aluminium/G.I./M.S complete all as specified and directed by Engineer-in-Charge. |
