|
| 1 | Charpoy GI pipe (FD-220)S & F following components of Charpoy GI pipe including dismantling unservicable one all as specified and as directed.(a) Long rail made of 32 mm dia GI Tubing medium grade ISI mark 1.88 mtr long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy. |
| 2 | (b)Ditto all as per item No. 1 above but 3 way 32 mm dia GI elbow ISI mark |
| 3 | (c)Ditto all as per item No. 1 above but check nuts of 32 mm dia |
| 4 | (d)Conversion of 32 mm dia long rail obtained from item No 1 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow, complete all as specified and as directed. |
| 5 | (e)Conversion of 32 mm dia short rail obtained from item No 4 above into two numbers leg including fixing to 3 way 32 mm dia after one end threaded, complete all as specified and as directed.. |
| 6 | (f)Removing old unserviceable/rusted /welded MS Square tubeand M&L new MS Plate of size900mmx40mm x 5mm duly painted with black colour after applying red oxide after making two Nos hole with 75mmx6mm nut & bolts each complete all as specified and as directed. . |
| 7 | (g)Removing old Nylon Newar and M&L New Nylon newar of 50/55mm width 1st quality(white in colour) .Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per drg Rest complete all as specified and as directed. |
| 8 | (h)Removing old Nylon Newar and M&L New12 mm BWR phenol bonded commercial plywood of size 2020 mm x 900 mm including providing 900mmx40mm x 5mm MS plate two Nos(duly painted with black colour after applying red oxide) for support with 12 Nos heavy duty Nut and bolts(75mmx6).Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per drg before fixing the ply top. Rest all as per directed |
| 9 | (j)Removing old U/S plywood and M&L New12 mm BWR phenol bonded commercial plywood of size 2020 mm x 900 mm including fixing of plywood with new 12NosNut and bolts (75mmx6).Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per drg before fixing the ply top. Rest all as per directed |
| 10 | Sofa five seater (TP) (a) Removing old unserviceable cushion with tapestry/leatherite cover complete and M&L 75mm thick new cushions, 32 Density with approved tapestry/leatheritecloth cover (rates of cloth not less than 750 Rs per Mtr)with pasting/staple/stitch on all side front/back/side complete all as specified and as directed. |
| 11 | (b)Removing old unserviceabletapestry/leatherite cover complete and S&Fnew approved tapestry/leatheritecloth cover (rates of cloth not less than 750 Rs per Mtr)with pasting/staple/stitch on all side front/back/side complete all as specified and as directed. |
| 12 | (c)Removing stains /dirts and fungal markfrom sofa five seater due to continous use /moistire etc from tapestry/leatherite cover complete sofa (3+1+1)by using vaccum cleaner andchemical/stain remover from all side ie. front/back/side complete all as specified and as directed. |
| 13 | Chair for computer Without Arm steel Cushioned Drg No- GE (K) -139 (a) Taking down oldunserviceable seat of chair for computer w/o arm steel cushioned and S&F new seat made out 50 mm thick cushion 32 Density covered with approvedtapestry cloth pasted on 12 mm BWR Ply complete all as specified and directed. |
| 14 | (b)Taking down oldunserviceable back of chair for computer w/o arm steel cushioned and S&F new back made out 50 mm thick cushion 32 Density covered with approvedtapestry cloth pasted on 12 mm BWR Ply complete all as specified and directed. |
| 15 | CHAIR COMPUTER MAP /Chair Revolving High/Mid Back : TP/FD/E6/MAP/12 & FD/E6/MAP/01(a)Taking down oldunserviceable seat of chair computer MAP and Chair Revolving High/Mid Back S&Fwith new seat made out from tapestry/ leatherite rexine cloth, best quality exactly shall be as per the sample approved including U foam cushion of 75mm thick 32 density pasted on 12 mm ply as approved, complete all as specified and directed. |
| 16 | (b)Taking down oldunserviceable back of chair computer MAP and Chair Revolving High/Mid Back S&F with new back made out from tapestry/ leatherite rexine cloth, best quality exactly shall be as per the sample approved including U foam cushion of 3\" thick 32 density pasted on 12 mm ply as approved, complete all as specified and directed. |
| 17 | (c)Taking down oldunserviceablePVC castorwheel from chair computer MAP/ executive/revolving and supply and fix new PVC wheel of best quality as approved, complete all as specified and directed. |
| 18 | (d)Taking down oldunserviceablehydraulic height adjustment lift of chair computer/chair executive/chair visitor and supply and fix hydraulic cylindrical type height adjustment lift of best quality as approved, complete all as specified and directed. |
| 19 | (e)S&F handle of chair revolving/computer of(soft/PV) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed. |
| 20 | (f)Taking down oldunserviceable PVC pedestal from chair computer/chair executive and supply and fix new five legged MSCP pedestal with 05 nos PVC castor wheel of best quality as approved, complete all as specified and directed. |
| 21 | Chair visitors /Chair Writing MAP Trade Pattern(a) Chair visitors of different Make and Model (SEAT & BACK) and re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted. |
| 22 | (b) Supply and Fix New SEAT & back (Cushion,tapestry & ply)50mm thick cushion complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted. |
| 23 | (c) Supply and fix handle of chair visitors of(soft/PU) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed. |
| 24 | (d) M&L for painting two coats of Black paintin Iron frame of Chair Visitor of various Make & Models including scraping old painted/rusted parts by emery paper all as specified and as directed. |
| 25 | Almirah Steel med (FD 67/1032)S & F following components of Almirah steel medincluding dismantling unservicable one all as specified and as directed(a) Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL) |
| 26 | (b)Ditto all as per item No. 25 above but handle 100 mm size chromium plated |
| 27 | (c)Ditto all as per item No. 25 above but 3 way locking devicewith necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer. |
| 28 | (d)Ditto all as per item No. 25 above but supply and fix leg made of 20guage thick CRCA sheetduly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved qualityover a coat of primer. |
| 29 | (e)Ditto all as per item No. 25 above but adjustment/welding of exsisting shelves by providing new clamps after removing unserviceable clamps all as directed |
| 30 | (f)S&F door shutters made of 20 guage thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device withlock with duplicate keys- 01 No,key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing.(Note for steel painting;- All steel surface shall be done with spray painting)(Make of Lock-LICO/Tulsi/VRL) |
| 31 | (g)S&F shelves made of 20 guage thick CRCA sheetwelded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved qualityover a coat of primer. |
| 32 | (h)Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outsideincluding dents/bends complete all as specified and as directed. |
| 33 | Almirah steel large (FD-67/1031)S & F following components of Almirah steel medincluding dismantling unservicable one all as specified and as directed(a) Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL) |
| 34 | (b)Ditto all as per item No. 33 above but handle 100 mm size chromium plated |
| 35 | (c)Ditto all as per item No. 33 above but 3 way locking devicewith necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer. |
| 36 | (d)Ditto all as per item No. 33 above but adjustment/welding of exsisting shelves by providing new clamps after removing unserviceable clamps all as directed v |
| 37 | (e)S&F leg made of 1mm thick CRCA sheetduly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved qualityover a coat of primer. |
| 38 | (f)S&F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No,key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing Make of Lock-LICO/Tulsi/VRL) |
| 39 | (g)S&F shelves made of 1mm thick CRCA sheetwelded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved qualityover a coat of primer. |
| 40 | (h)Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed. |
| 41 | Table dining 900x 900 mm steel (FD-1009)S & F following components of Table dinning 900x900 mmsteelincluding dismantling unservicable one all as specified and as directed.(a) Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion all as specified and as directed . |
| 42 | (b)Table top made of 18mm thick pre-laminated MDF board exterior quality of teak line shade including provision of 4mm thick teakwood beading all around all as specified and as directed. |
| 43 | (c)Preparation of the old painted steel surfacesby scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality all as specified and as directed. |
| 44 | (d)Ditto all as per item No. 41 above but PVC shoe |
| 45 | Table 900x 600 mm steel with /W/O drawer (FD-1009)S & F following components of Table dinning 900x600 mmsteelincluding dismantling unservicable one all as specified and as directed.(a) Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion all as specified and as directed. |
| 46 | (b)Table top made of 18mm thick pre-laminated MDF board exterior quality of teak line shade including provision of 4mm thick teakwood beading all around all as specified and as directed. |
| 47 | (c)Removing old U/S Drawer and S/F new drawer made of 1mm CRCA sheetincluding painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing and providing new lock 6 lever to top drawer all as specified and as directed. |
| 48 | (d)Preparation of the old painted steel surfacesby scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality all as specified and as directed. |
| 49 | (e)Ditto all as per item No. 45 above but PVC shoe |
| 50 | Teapoy verandah (TP) -(a)Taking down old unserviceable top and providing new top made up 18 mm thick BWR plywood pasted with .8mm thick white laminated sheet including 4 mm thick teak wood beading all roundall as per drawing, all as specified and as directed. |
| 51 | (b)Preparation of the old painted steel surfacesby scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of whiteshade of approved quality all as specified and as directed. |
| 52 | Chair Verandah(FD-256)-(a)Taking down old existing unserviceable cane from chair verandah and M&L for reweaving the same with new 4mm wide white plastic cane oval type best quality, in seat and back half round including removing of old paint after scrapping and applying two coats of sybnthetic ename paint white color including fixing4 NosPVC Shoesto the legs, complete all as shown on drawing and as directed. |
| 53 | (b)M&L for point welding of Chair verandah(One point means welding to broken point alaround the pipe) all as specified and as directed. |
| 54 | Bed Hard Map Steel(FD/E6MAP/8)-(a)Removing old U/S plywood top from Bed hard Steel MAP and S&F new BWR plywood top of size 7\"x4\"x12 mm thick confirming to IS: 303 as shown on drg.Rest all as per drg and directed. |
| 55 | (b)Removing old U/s Particle board from Head board. and S/f New Headboard made out of 18mm thick prelaminated MDF board of teakshade both side .Edges all aroundpasted with 4mm thick foam/ pvc beading all as specified and as directed. |
| 56 | (c)Removing old U/s Particle board from foot board. and S/f New footboardt made out of 18mm thick prelaminated MDF board of teakshade both side .Edgesall aroundpasted with 4mm thick foam/ pvc beading all as specified and as directed. |
| 57 | (d)Preparation of old painted steel sufaces of Bed hard steel steel by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying one coats of black synthetic enamel paintincluding fixing of four Nos ofPVC shoes to each Bed all as specified and as directed. |
| 58 | Charpoy hardMap Steel(FD/E6MAP/8)-(a)Removing old U/S plywood top from Charpoy hard Steel MAP and S/F vnew BWR plywood top of size 7\"x4\"x12 mm thick confirming to IS: 303 as shown on drg.Rest all as per drg and directed |
| 59 | (b)Preparation of old painted steel sufaces of Charpoy hard steel steel by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying one coats of black synthetic enamel paintincluding fixing of four Nos ofPVC shoes to each Charpoy |
| 60 | Charpoy folding steel -(a)Removing old u/s plywood and S&F new plywood top BWR 12mm thick with Nuts and bolts as per drg all as specified and as directed. |
| 61 | (b)Preparation of the old painted steel surfacesby scraping with emery paper, cleaning and applying one ctwo of synthetic enamel paint of black shade of approved quality all as specified and as directed. |
| 62 | Chair School with Hand board(a)Removing seat and back in one piece and S&F newPVC seat & Back (in one pieceof make Blowplast/Ballowal with four nos screw as per drg all as specified and as directed |
| 63 | (b)Removing old U/STop ( Handrest )and S/F new top (Handrest) with pvc edging made out of 18 mm thick MDF board of approved shade as per drg with four nos screw as per drg all as specified and as directed |
| 64 | (c)Removing old U/S bottom basketand S/F new basket made out of MS baras per drg with four nos screw as per drg all as specified and as directed |
| 65 | (d)Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of black shade of approved quality complete all as specified and as directed. |
| 66 | Chair writing tubuler steel w/Arms- (a)Removingof old unserviceable seats and back and S/F new seats and backof chair tubular steel with arm duly cannedwith heavy duty screw/nut all as specified and as directed . |
| 67 | (b)Removingof old unserviceable handle and S/F new handleof chair tubular steel with arm with heavy duty screw all as specified and as directed. |
| 68 | (c)S & F Screw with plate washer for seat & back for chair writing for cadet of Godrej (CH-07 /FD 75) as per manufacturers description. |
| 69 | (d)Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality complete all as specified and as directed. |
| 70 | Table Computer Steel size 1350 mm x 560 mm x760mm (Steel)- (a)Removingold u/s top and S&F New top of Size 1350 mm x 560 mm of 18 mm thick MDF Board with screw all as specified and as directed . |
| 71 | (b)Removingold u/s side and S&F New side of Size 620 mm x 450 mm of 18 mm thick MDF Board with screw all as specified and as directed . |
| 72 | (c) Removingold u/s Back and S&F New Back of Size 1270 mm x 300 mm of 18 mm thick MDF Board with screw all as specified and as directed. |
| 73 | (d)Removingold u/s Shelves/Bottom and S&F Newshelves /Bottom of Size 1220 mm x 450 mm of 18 mm thick MDF Board with screw all as specified and as directed. |
| 74 | (e)Removingold u/s Telescopic channel and S&F New telescopic channel 0f 12 inch/14 inch of make Hettick/Godrej for Keyboard of table all as specified and as directed. |
| 75 | (f)Removingold u/s Keyboard tray and S&F New keyboard tray of Size 1350 mm x 280 mm of 18 mm thick MDF Board with screw all as specified and as directed . |
| 76 | (g)Removingold u/s partition and S&F New partition of Size 450 mm x 260 mm of 18 mm thick MDF Board with screw all as specified and as directed. |
| 77 | (h)Preparation of old painted steel sufaces of Table computersteel steel by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of black synthetic enamel paintincluding fixing of four Nos ofPVC plingth screw to each table. |
