|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 2 | M&L for coloured joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified. |
| 3 | M&L for coloured Glazed ceramic tiles as in vertical surface 450X300X 7mm thick set and jointed in skirting over 10mm thickrendering in CM 1:4 using neat cement slurry and pointed in white or colour cement to match. |
| 4 | M&L for 20 mm thick Graniteblack work (in one single piece table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 5 | M&L for machine cut kota stone flooring 20-22mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing over and including 20 mm thick screed bed in CM 1:4 . |
| 6 | Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles |
| 7 | M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified. |
| 8 | M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in cement mortar 1:4 complete all as specified. |
| 9 | M&L for Brickwork with subclass \"B\" old size bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified. |
| 10 | Taking down cement or cement limeplaster on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc. |
| 11 | M&L for 15mm thick rendering in two layer on stone masonry surfaces or surfaces other than fair face of brick work of walls consisting of 1st layer of 10mm thick plaster in CM 1:4 and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM 1:4 mixed with water proofing compound (ISI marked) @ 200 ml per bag of cement or as per manufacturer’s instructions, finished fair & even, complete, all as specified and directed.Note : - Supply only water proofing compound shall be measured and paid for separately. |
| 12 | M&L rendering 10 mm thick onfair faces of brick surfaces or concrete surfaces and finished surfaces even & fair in CM 1:6 all as specified |
| 13 | M&L for Preparation of newly plastered surfaces of walls and applyingtwo coats of cement base paint white or tinted over a coat of primer complete all as specified and as directed. |
| 14 | M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed. |
| 15 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified. |
| 16 | M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and as directed |
| 17 | Supply only liquid water proofing compound. |
| 18 | Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sq. m each. |
| 19 | Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each. |
| 20 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples. |
| 21 | S&F Factory made solid panel PVC molded door shutter 28-30 mm thick (style)with 2 or 6 raised panneled desighned with 2mm thick moulded prelam pvc sheet on bothfacewith partical board core as per specification & drawings. |
| 22 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 23 | S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 24 | S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 25 | S&F 200 mm long aluminium anodised handles, cast type complete all as specified and as directed. |
| 26 | Taking up or down 15 mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store. |
| 27 | Taking up or down 20 mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store. |
| 28 | Supplying & FixingCPVC pipes SDR 11 & Plain CPVC SDR 1120mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed. |
| 29 | Supplying & FixingCPVC pipes SDR 11 & Plain CPVC SDR 1125mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed. |
| 30 | Taking downPVC SWRpipe(any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 31 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed. |
| 32 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed. |
| 33 | S&F 110mm bore PVC (SWR) bends any radius |
| 34 | S&F 75mm bore PVC (SWR) bends any radius |
| 35 | S&F 75mm outlet dia bore PVC (SWR) floor trap plain with grating including jointing with solvent cement |
| 36 | M&L for Cutting chases, pinning in, making good to facing where required & pointing in CM 1:3 to ends or edges of landings ,steps cill sunshade ,shelves ,lintel , concealed water tubing and like not exc 10CM girth in brick wall |
| 37 | S&F in repair cast copper alloy chromium plated 15 mm Bib cock with wall flange, cast copper alloy with crutch, screwed down, screwed for iron pipe or for brass ferrule and fixed complete. NOTE:- The minimum weight of item should be400gm each |
| 38 | S&F in repair Angular Stop valve/angular cock 15mm borecast copper alloy chromium plated with wall flange,chromium plated screwed down, high pressure fancy type screwed both end for iron pipe or for unions and fixed all as specified and directed.NOTE:- The minimum weight of item shouldbe400gm each |
| 39 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm including fixing complete. |
| 40 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed |
| 41 | S&F in repair water closet squatting pan \"Orissa Pattern\"of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) with P\" or \"S\" trap complete incl connection to trap,and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor. |
| 42 | S&F in repair PVC valveless 10 ltr capacity, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. |
| 43 | S&f in repair Health faucet (ABS body) chromium plated including SS flexible tube15 mm dia 1.5mtr and wall hook including making connection and fixed in position complete. |
| 44 | S&F in repair counterVitreous Chinarwarewash hand basin,counter top of size 550x400 mmincluding brackets,brass waste coupling complete all as specified and as directed |
| 45 | S&F beveled edge looking mirror of selected quality glass of 6mm thick, mounted on wall fixed with steel screws studscomplete all as specified and directed by Engineer-in-charge. |
| 46 | S&F in repair chromium plated Soap dish holder complete all as specified |
| 47 | S&F in repair chromium plated towel ring complete all as specified |
| 48 | S&F vitreous china urinal,half stall type ,size (375x390x590) white (excluding flushing cistern, flush pipe and waste pipe), |
| 49 | S&F in repair Gun matel, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed |
| 50 | Demolition of Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness below or above ground levelunreinforced. |
| 51 | M&L for 50mm thick Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate finished cement concrete surface even and fair without using extra cement as in plinth protection laid in panelscomplete all as specified & directed. |
| 52 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 53 | M&L for Mild steel work angle / hollow sectionin purlins, rafter including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed. |
| 54 | Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required not exc half bricks |
| 55 | M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Note : Make of the material \"Smart Care damp block 2K\"as approved. |
| 56 | S&F in repair rotational moulded, polythene PVC water storage tank (Cylindrical vertical with closed top) tripple layer white in colour1000 Ltr capacity hoisted and fixed in position including 20mm brass ball valveand tak nipple complete all as specified and as directed. |
| 57 | DismantlingAsbestos cement (corrugated,semicorrugated ,etc ) in roof covering complete all as specified and directed by Engineer-in-Charge. |
| 58 | M&L for Pre- painted galvalume aluminum zinc coating GI basedsemi corrugated /manglore pattern steel sheet 0.50mm thick of red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 59 | S&F pre paintedPlain galvanised, mild steel sheet .50 mm thick , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating150all as specified and directed. |
| 60 | Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 61 | S&F anodised grid (of size 605 mm x 605 mm) frame make for false ceiling including providing hangers of 6mm GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed. |
| 62 | M&L for 4mm thick Nonasbestos fibre cement designer building/ceilingboards size (600mmx600mm) fixed with screws to snap grid works in ceiling complete all as specified and directed by Engineer -in-charge |
| 63 | M&L for 75mm thick Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub basecomplete all as specified & directed. |
| 64 | M&L for 80 mmfactory made chamfered edgeprecast concrete interlocking paver blocksany shape and size locally available of best quality and confirming to IS 15658-2006 , M-30 Gradewithgrey cement and pigmentswith appproved colour design &pattern as in footpath, parks, lawan,or light traffic ways of required strength made by table vibratory method usingPU mouldlaid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, compacted and proper embedding /laying of inter locking paver blockinto the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with fine sand and cutting of paver block as per required size and pattern finishing and sweepingextra sand complte grey cement and pigments complete all as specified and as directed. |
| 65 | M&L for P.C.C 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping or roof kerbs on roof chamfered on edge including troating slightly complete all as specified and as directed. |
| 66 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders, cooler stand ; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 67 | S&F in repairpillar tap 15mm bore cast copper alloy with fancy type, chromium plated screwed down high pressurelong screwed shank and fly nuts for iron pipe all as specified and directed. |
| 68 | S&F welded steel wire fabric of weight n exc 4 kg per Square metre supplied and fixed complete to wood or steel memberscomplete all as specified and as directed. |
| 69 | Demolition of roof treatment including PCC/ Brick Tiles, Mud phuska, PCC padding, plastering, APP membrane complete completeof any thicknesss and in any position and removing the demolished material out of MoD land complete all as specified and as directed. |
| 70 | M&L forwater proofing treatment using APP based polymeric membrane not less than 3 mm thick, weighing not less then 3.00 kg / Sqm, reinforeced with polyster non-woven fabric (weighing not less than 150 gm/sqm) laid over and including cold bitumen primer appliedat the rate of 0.30 kg/sqm by forced application complete all as specified and as directed. |
| 71 | M&L for providing cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) as in roof padding to achieve the required slope and smooth surface and in coping, benching etc mixed with liquid water proofing compound 200 ml per bag of cement by weight of cement or as per manufactures instructions complete all as specified and as directed.Note : Liquid WPC shall be measured and paid separately under relevant item of this BOQ. |
| 72 | M&L for cement concrete tiles 20cm x 20cm x 20mm thick, with grey cement and no pigments, machine pressed, set jointed and pointed in neat cement slurry in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 and filling the joints with Tile Mix premium cementitious grout material of JK Cement or its equivalent complete all as specified and as directed. |
| 73 | M&L for P.C.C 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping or roof kerbs on roof chamfered on edge including troating slightly complete all as specified and as directed. |
| 74 | Demolition and breaking up 150 mm internal dia drain pipe (salt glazed ware, AC or reinforced cement concrete) set in cement mortar including cement concrete bedding and haunching and removing the demolished material out of MoD land complete all as specified and as directed. |
| 75 | Construction of Soakage well of 1.80 mtr dia and 3.0 mtr deep complete all as specified and as shown in drawing No CEJZ/2004/S-35 sheet 1/1 dated 11 May 2004 (Revised 06-08-2005) which includes the following:-(i)Excavation and earth work, including R/F and removal of surplus soil.(ii)Cement concrete in foundation, brick work honey comb brick work.(iii)Reinforced cement concrete, form work, reinforcement(iv)Precast cover slab, plastering, filling brick agreggate and all Pipes and fitting complete all as shown in drawingas specified and as directed. |
| 76 | Construction of septic tank for 25 users which includes, excavation in ordinary soil, PCC in foundation, brick work, RCC slab, rainforcement, Manhole covers, CI vent shaft and sludge chamber etc complete all as shown in drawing No CEJZ/2004/TD/S-17, Sheet No- 1/1 dated 11 May 2004 (Revised 06 Aug 2005) complete all as specified and as directed. |
| 77 | Excavating over areas, not exceeding 1.50 m deep and getting out soft / loose soil, complete all as specified and as directed. |
| 78 | Excavating over areas, exc 1.5m & nexc 3m depthdeep and getting out soft / loose soil, complete all as specified and as directed. |
| 79 | Excavation in trenches in any type of soil n exc 1.5 m wide and n exc 1.5 m deep and getting out including forming bottom to required level or slope for laying pipes on concrete bed or for manholes n exc 10 Sqm on plan and n exc 1.5m deep all as specified and shown on drawings. Complete all s specified and directed. |
| 80 | Returning filling in excavated soil and ramming into excavation after laying pipes, construction of manhole etc including spreading, levelling and watering and well ramming in 25 cms layers Complete all s specified and directed. |
| 81 | Removing of surplus excavated earth to a distance exceeding exc 250m but n exc 500m and deposited where directed at a level no exc 1.5m above the starting point Complete all s specified and directed. |
| 82 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed. |
| 83 | M&L for Brickwork with sub class \"B\" bricksstraight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed. |
| 84 | M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 even and fair complete all as specified |
| 85 | M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 even and fair complete all as specified |
| 86 | M&L for salt glazed stone ware (SWG) drain pipes 150 mm bore grade \"A\" (ISI marked) laid in trench and jointed in cement mortar (1:1) Complete including dismantle of old pipe all s specified and directed. |
| 87 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in bedding to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested complete for 150 mm bore. Complete all s specified and directed. |
| 88 | M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in surface channels and drains. |
| 89 | M&L for MS TMT bars 6 to 8 mm dia in reinforcement cut to length bent to shape required including bending, cranking and hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 90 | M&L for providing precast reinforced cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) as in cover slab for manholes, chajja, shelves and similar articles including required form work complete all as specified and as directed.Note : Reinforcement shall be measured and paid separtely |
| 91 | Dismantling timber scantlings 40sqcm and over in section, in any position in framed work complete all as specified and as directed. |
| 92 | M&L PCC (1:3:6) type C-2 (40 m graded broken stone aggregate ) as in foundation complete all as specified and directed. |
| 93 | M&L for formwork (rough finish surface) to sides of concrete foundation, footings, bases of column , plinth beams and similar work complete all as specified & directed. |
| 94 | M&L for formwork (rough finish surface) to faces of walls, retaining walls, parapets and similar work complete all as specified & directed. |
| 95 | M&L for formwork (rough finish surface) to side and soffits of beams and similar work complete all as specified & directed. |
| 96 | M&L for formwork to edge of concrete (rough finish surface)exc 10 cm but n. exc 20 cm widesuch as roof slabs ,floor slabs landings and similar work complete all as specified & directed. |
| 97 | M&L for reinforced cement concrete (design mix) M-30 (20mmgradedaggregates) in foundation, raft, plinth beam, bases of column and mass concretecomplete all as specified & directed. |
| 98 | M&L for reinforced cement concrete (design mix) M-30 (20mmgradedaggregates) in walls and similar workscomplete all as specified & directed. |
| 99 | M&L for reinforced cement concrete (design mix) M-30 (20mmgradedaggregates) in Slabs supported on walls, beams and column in floors roofs, landings, balconies, canopies ,deck slabscomplete all as specified & directed. |
| 100 | S&F for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 101 | M&L for mild steel round bar 10 mm dia and above in rungscut to length bent to shape required including cranking bending and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips etc.complete all as specified and as directed. |
| 102 | S & ffor cast iron soil (spun pipes), waste and vent pipes 100 mm dia in any length with or without ears with cement joints fixed on walls complete |
| 103 | S & F for CI cowls cpmplete |
| 104 | M & L for trial bore 200 mm dia upto 200 mtr deep below ground level in any kind of soilstrata including hard stone / boulder including electric logging, MA cap, MA flat iron clamp, reducing socket etcincluding reaming upto 525 mm dia for 60 rm from ground level including MS casing pipe of 200 dia and thickness 8 mm and pea gravel etc. complete as directed. |
| 105 | M&L for gravity sewers with RCC NP-3, 200 mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional for the depth 0.70 mtr -1.65 m mtr Type of Bedding. 150 mm th. PCC 1:4:8 |
| 106 | M & l for hard core broken stone of gauge exc 63mm but n. exc 100, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled/ rammed to a true surface complete |
| 107 | M&L for providing pre cast cement concrete as in cover slab (factory made)with plain faces with cement concrete 1:2:4 type B1 set in cm 1:4 etc.complete all as specified and as directed. |
| 108 | Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtureS&Fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the materialfrom site and making good the disturbed surfaces of walls ceiling etc complete all as directed.(Note: Credit for above items should be made as per credit Schedule separately) |
| 109 | Taking down carefully by submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge. |
| 110 | Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrapincluding MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and directed |
| 111 | M & L for Point wiring for One light/ fan point controlled by one way switch 5 amp with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, inuniversal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases (making good all to the disturbed surfaces as per existing) including with modular flush metal boxes with modular cover plateS&Frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5Sqmmsize in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge as described below:- |
| 112 | All as per item No. 11600 butfor One 3 pin 5 Amps socket point controlled by one way switch on same board. |
| 113 | All as per item No. 116.00 butfor 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed . |
| 114 | S&F ceiling rose, PVC / Polycarbonate, isolated body 65mm x 50mm three terminals complete. |
| 115 | S&F switch piano, flush type, 5 Amps single pole one-way complete. |
| 116 | S&F switch piano, flush type, 15 Amp single pole one way complete all as specified. |
| 117 | S&F socket outlet, flush type, 2-in-1, 5 pins 5 Amps complete. |
| 118 | S&F socket outlet, flush type, 2-in-1, 3 pins 5 /15 Amps complete. |
| 119 | Supply & fixing indoor decorative ultra slim surface /Wall mounted LEDbatten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts, co- related colour temperature (CCT) of 6500K, >100 Lm/Wattcomplete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 120 | Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LEDbatten tube light complete fitting 1x10 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- relatedcolour temperature (CCT) of 6500K,>100Lm/Wattcomplete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 121 | Supply and install of 35 W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainablewith heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- relatedcolour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280Vincluding all connections complete all as specified. |
| 122 | M&L for building securitylight bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubularpole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description. |
| 123 | S&F MCB distribution board, SPN 8 way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified. |
| 124 | All as per Item No 135.00 but for 4 Way |
| 125 | S&F powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted, TPN 4 way complete. |
| 126 | S&F 415V 10KA \"C\" curve miniature circuit breaker (MCB), TPN 63-100 Amps, complete with connection (Note 100 Amp 3 Nos, 63 Amps 2 Nos) |
| 127 | S&F MCB SPN32 Amps,\" C\" series , bracking cap 10KA, 240V complete. |
| 128 | S&F MCB SP 6-32 Amps, \" C\" series ,bracking cap 10KA, 240V complete. |
| 129 | M&L for Sub Main Wiring for DB to DB with two runs single core 10 Sqmm PVC insulated unsheathed(FRLSH) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roofwith and including 10 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.nOTE - 02 run 10 Sq mm single core cable,one run of 10 Sq mmearth wire & One run ofPVC conduitwill measured as one RM. |
| 130 | S&F exhaust fan, steel body AC single Phase 230V of size 300mm sweep with blades, and frame and louvers complete all as specified and as directed.(Note : Old Fan should be deposited in MES Store) |
| 131 | Cutting holes for air ducting of exhaust fan in Circle / square shape as per requirement and making good to facing where required & pointing in CM 1:3 to ends or edges complete all as specified and as directed. |
| 132 | Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor cable size 16 sq mm 4 core laid in trenches / duct / fixing on walls / poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panelfrom pole / Main Panel Box and testing complete all as specified and directed. Note:- HDPE pipe rate shall be deemed in quoted rate above. |
| 133 | M&l for Earthing complete with GI earthplate 600mm x 600mm x 6.3 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm asearth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate,reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling incl necessary excavation and earth work complete all as specified and as directed. |
