|
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. |
| 2 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. Extra rate for each addl. Floor over the rate of ground floor. |
| 3 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 4 | Dismantling E.P. or Anglo-Indian W.C. |
| 5 | 25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 ] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency]. |
| 6 | Supplying,fitting & fixing 1st quality Ceramic tiles in wall and floor to match with the existing work & four nos of key stones (10 mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface if necessary or by synthetic adhesive & grout materials etc.-Floor-With Polymerised Adhesive and Epoxy grout pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface)-Area of each tile upto 0.09 sqm--Floor -Coloured decorative. |
| 7 | Supplying,fitting & fixing 1st quality Ceramic tiles in wall and floor to match with the existing work & four nos of key stones (10 mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface if necessary or by synthetic adhesive & grout materials etc.-WWiitthh PPoloylmymereirsiesded AdAhdeshievseive & Eapnodxy Egproouxyt pogirnotiuntg pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface)-Area of each tile upto 0.09 Sq.m [using adhesive 3 mm thick]-Coloured decorative. In wall- Coloured decorative. |
| 8 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. With \"S\" trap (with vent). |
| 9 | Supplying fitting and fixing Cast iron soil pipe only confirming to IS 3989 /1970 and IS 1729 /1964 with bobbings nails etc including making holes in the wall ,floor etc. and cutting trenches etc. in any floor through masonry concrete if necessary,and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete(measurement will be made along the center line of the total pipe line in fitted condition including specials ,payment for specials & painting will however be paid seperately). With valamoid joints including sealing with sand cement mortar (4:1) upto quarter depth. 100 mm dia.( internal). |
| 10 | Construction of septic tank of different capacities as per approved drawing with first class brick work in cement mortar (1:4) including two 560mm dia R.C.C manhole cover of approved make supplied fitted and fixed in the 100 mm thick RCC (1:1.5:3)top slab with necessary fittings 20 mm thick cement plaster (4:1) with neat cement finished to the internal surfaces and 15mm thick cement plaster (4:1) to outside wall upto 200mm below G.L floor finished with 25mm thick grey artificial stone over 100 mm thick RCC(1:1.5:3) bottom slab including supplying fitting and fixing all necessary specials fittings S.W. tees, C.I foot rest etc. including excavating earth in all sorts of soil, shoring, bailing and pumping out water as necessary, ramming dressing the bed and refilling the sides of the tank with earth removing spoils filling of the chamber with clear water removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costsof all labour and material. For 30 users. with Bazree (N.B. Varity) (other than SAIL/TATA/RINL). |
| 11 | Construction of circular soak well 2.5 mt deep in all sorts of sandy soil with dry brickwork upto 1.6 mt from the bottom having 150 mm intermidiate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.9 mt from top with 20 mm thick cement plastering (1:4) to inside face upto the depth of cement brick work ,12 mm thick cement plaster (1:4) on outer face from top of the well upto GL and 6 mm thick cement plaster (1:4) on top of the RCC cover slab including filling bottom 1 mt of inside of the well with brick metal (50 m to 63 mm size) including RCC cover slab 100 mm thick with cement conc. (1:1.5:3) with stone chips with necessary reinforcement with shuttering including one 560 mm dia RCC manhole cover (heavy type) of approved make supplied ,fitted and fixed in the cover slab with necessary fittings making necessary arrangements for pipe connections ,excavation of well incding shoring ,dewatering and removingthe excess earth from the premises as per direction complete in all respect with all cost of labour and materials. With 250 mm thick dry brick work and 250 thick cement brick work (6:1) and 1.00 m inside dia. (other Manufactures Not specified) |
| 12 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor) With 1:4 cement mortar. 10 mm thick plaster |
| 13 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor) With 1:6 cement mortar. 15 mm thick plaster |
| 14 | Supplying & laying in the specified pattern of Interlocking Concrete Block Pavements (ICBP) with concrete blocks (with Concrete grade as specified as per table 1 of IS 15658:2006) manufactured from BIS licensce manufacturer, with spacer nib (small protruding profiles on the vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per Cl. No.3.26 of IS:15658) and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block, as per Table 2 of IS :15658 with flexural strength/ breaking load as per Annexure G of IS: 15658 on the preparedbase course of specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and filling up the gaps in between paver blocks with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2 of IRC SP 63) and completing the edges with cut blocks as per Cl. No. 8.7 of IRC SP-63(2018) with proper confinement of bedding and joint filling sand, compaction, levelling and filling up of the edge gap. 60 mm thick.Coloured Decorative |
| 15 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. in cluding using of approved putty etc. on the surface, if necessary On timber or plastered surface with super gloss(hi-gloss) of approved quality Two coats (with any shade except white). |
| 16 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 17 | Wood work in door and windows frame fitted and fixed complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete ,iron butt hinges and MS Clamps .(the quantum should be corrected upto three decimals). Sal Siliguri |
| 18 | Z-batten shutters of door and window as per design havings tongued and groove -half lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position ,but excluding the cost of hinges and other fittings in ground floor. Shutter with 19 mm thick planks ,19 mm thick battens. |
| 19 | Supplying fitting and fixingbib cock or stop cock Chromium plated bib cock short body (Equivalent to code no. 511 & Model-Tropical/Sumthing Special of ESSCO or similar brand) |
| 20 | Supplying PVC water storage tank of approved quality with closed top with lid (Black) multilayer 1000 ltr capacity |
| 21 | Labour fpr hoisting plastic water storage tank Upto 1500 ltr capacity Upto 1st storey from GL |
| 22 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. 250mm x 19mm dia. bolt. |
| 23 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: With continuous plate base (Hexagonal/ Round rod) 100 mm grip x 10 mm dia rod. |
| 24 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: 150mm long x 12mm dia. bolt. |
| 25 | Iron butt hinges of approved quality fitted & fixed with steel screws, with ISI mark. 75mm x 40mm x 1.12mm) |
| 26 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) 40mm X 6mm, 250mm Length |
| 27 | Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top,bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in- Charge. |
| 28 | Wash basin white vitreous china of approved make(without fittings) supplied ,fitted and fixed in position on 75 mm x 75 mm x 75 mm wood blocks and CI brackets including two coats of painting of CI brackets. 550 mm x 400 mm size. |
| 29 | Supplying ,fitting & fixing approved patent vent cowlICI conforming to ISS and painting two coats to the exposed surface with approved paint complete.(payment of painting will however be paid seperately). 100 mm dia. |
| 30 | Supplying fitting and fixing G.I. of TATA make with all necessary accesaries specialsviz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes,making threads fitting,fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials andtwo coats of painting withapproved paint in any position above ground ( Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials.)a(ii) 15mmdia. medium quality |
| 31 | Supplying fitting and fixing G.I. of TATA make with all necessary accesaries specialsviz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes,making threads fitting,fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials andtwo coats of painting withapproved paint in any position above ground ( Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials.)a(ii) 32 mmdia. medium quality |
| 32 | Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings29-11-2016:White |
| 33 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 34 | Ordinary cement concrete Nominal (mix 1:2:4) Cement concrete with graded stone chips (20mm nominal size) excluding shuttering and reinforcement.if any in ground floor as per relevant IS Code. River Bazree. |
| 35 | 125 mm thick brick work with 1st class bricks in cement mortar (1:3) in ground floor |
| 36 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 37 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. in cluding using of approved putty etc. on the surface, if necessary On timber or plastered surface with other than hi-gloss of approved quality Two coats (with any shade except white) |
| 38 | White washing including cleaning and smoothening surface thoroughly, All floors:Two coats. |
| 39 | Stone Boulder 150 mm of N. Bengal variety (Materials delivered and stacked at site). |
| 40 | Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. |
| 41 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 635 mm X 395 mm X 420 mm. |
| 42 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make as per IS: 15965: 2012 and IS: 14246: 2013 (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).In Roof:- With 0.5 mm thick sheet. |
| 43 | Supplying, fitting and fixing shower of approved brand and make. Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand). |
| 44 | Supplying, fitting and fixing shower of approved brand and make. Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). |
| 45 | Supplying, fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary. Recess roll type size 150 mm X 150 mm. |
