Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats)
2
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade, Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface
3
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.
4
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture,over the plasterd wall surface to prepare the surface even and smooth complete.
5
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
8
P/F pre coated galvanised iron profile sheets 0.50mm (+0.05%) total coated thickness with zinc coating 120gms per sqm as per IS:277 in 240 mps steel grade, 5-7 microns epoxy primer on both sides of sheet and polyster top coat 15-18 microns. Sheet should have protective gaurd film of 25 micron minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by E-I-C. The sheet shall be fixed using self drilling /self tapping screws of sizes (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins,rafters and trusses and including cutting of size and shape wherever required.
9
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 m lead of: G.S. Sheet
10
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make , in all coloursand shade, laid on 20mm thick cement mortar1:4 including grouting the joints with white cement and matching pigments etc. complete : Size of tiles 600 x 600mm
11
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard,jointed with neat cement slurry mixed with pigment to match the shade of tiles,including rubbing and cleaning etc. complete, on 20 mm thick bed of cementmortar 1:4 (1 cement: 4 coarse sand).
12
Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
