IT and Telecommunications, Computers, Work Station, Medical Related Equipment and Supplies, Medical Equipments, Medical Equipment-Maharashtra

Supply Of A. Basic Unit:General Description:-The Unit Should Be A Cost-Effective, Flexible Anaesthesia Workstation For Performing And Monitoring Inhalation Anaesthesia, Suitable For Adult As Well Child Upto Neonatal Age. It Should Be Capable Of Providing Low-Flow Techniques To Minimize Gas And Anaesthetic Agent Consumption For Economical Day-To-Day Operationintegrated Systems:-The Anaesthesia Workstation Should Havea. In-Built & Intergated Ventilator With Coloured Tft Display,B. Intergareted Co2 Absorber,C. In-Built & Intergated Anaesthesia Gas Monitoring Facility D.Multi Parameter Monitor E.All These Components Should Be Of The Same Manufacturer Or Brand With Their Label On Each Component.Gas Supply:-The Unit Should Be Able To Connect To Central Pipeline & There Should Be Provision Of One Pin Index Yoke To Connect To One Emergnecy Gas Cylinder Of O2 & N2o Each.Trolley:-The Unit Should Have Powder Coated Steel Trolley With 4 Wheels & 2 Drawers & The Front Wheels Should Have Locking Device. The Unit Should Have Rail On One Side To Mount Other Equipments.Flow Meters:-Machine Should Provide Electronic Gas Mixing With Cascade Type Flow Meters .Hypoxia Guard:-It Should Have Proven Hypoxia Guard Design Using The Pin-Valve Mechanism.The Unit Should Equipped With Integrated Ratio System To Maintain 25 Vol% O2 In Fresh Gas & On Accidental Opening Of Only N2o Flow With O2 Valve Closed, The Ratio System Should Automatically Open O2 Valve To Maintain 25 Vol% O2 In Fresh Gas.Water & Particle Trap:-The Unit Should Have Water & Particle Trap To The Inlet Central Gas Pipe-Line Connections Of O2, N2o & Air.Patient Module:-It Should Have Fully Autoclavable Patient Module Having Anodized Metallic Casing. It Should Have 34?C Heated Patient Module To Deliver Warm Fresh Gas To Patient & To Prevent Condensation.The Patient Module Should Have Pressure Graduated Metallic Apl Valve, Inspiratory Valve, Expiratory Valve ,A Controlled Room Air Valve & Active Gas Scavenging Port. Co2 Absorber:- Patient Module Should Be Integrated To The Co2 Absorber Of 1.4 Kg & Co2 Absorber Should Be Single/Double Chamber Design Having Screw Type Threading For Easy Removal & Re-Fitting During The Operation.O2 Flush:-The Unit Should Have O2 Flush Facility To Give Approximately 50Ltr/Min Flow.Common Gas Outlet:-The Unit Should Have Common Gas Outlet For Using Open Circuit & The Unit Should Have Easy Change Over From Open Circuit To Closed Circuit Or Vice-Versa.Vaporizers:-It Should Have Provision To Connect Two Selectatec Mount Vaporizers & The Unit Should Be Provided With Two Vaporizers Equivalent To Tec-7 Type ,One Of Isoflurane & One Of Sevoflurane.

INR 2000 /-

Refer document

Refer document