|
| 1 | Dismantling of brick or brick tiles bedded and pointed in any mortar on roof including cleaning for refixing etc complete all as specified and directed. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed. |
| 3 | M&L for providing PCC 1:2:4 type-B1, (using 20mm graded stone aggregate) in roof paddingcomplete all as specified & directed. |
| 4 | M & L for providing 15 mm thick plaster in CM 1:4 mixed with polymer based water proofing compound when concrete is still green etc complete all as specified and directed. |
| 5 | M&L cutting out crack in V section in existing roof, chajjas or similar work up to 40mm deep and cleaning the same with water jet to get rid any loose material and wetting, grouting with cement & sand mortar 1:3 mixed with liquid WPC all as specified & directed. |
| 6 | M&L for applying Smart Care Damp Proof Ultra Fibre reinforced elastomericliquid applied water proofing membrane as in roof treatment @ 1 Litre per 10 Sqft inclusive of all three coats as per following application process :-(a) Prepare the surface by cleaning with high pressure water jet/wire brushes to ensure that it is free of dust, oil, grease, grime and loose particles.(b)Damaged portion if any to be repaired before application of roof treatment as per manufacturer\"s instruction.(c)Applying self priming coat of Smart Care Damp proof Ultra duly diluted with water in 3:1 ratio by volume. Allow the primed surface to dry for at least 3-4 hours prior to application of subsequent coat.(d)Applying 2 perpendicular coats of Smart Care Damp proof Ultra without any dilution to achieve a forced system coverage. Allow it ot dry for at least 4-6 hours between two coats. (Note : WORK SHALL BE CARRIED OUT BY THE AUTHORISED APPLICATORS OF THE MANUFACTURER IN CLOSE SURERVISION OF EXECUTIVE STAFF UPTO ENGINEER - IN- CHARGE LEVEL. |
| 7 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm including making good of jambs of opening with rendering in cement mortar 1:4, complete all as specified and directed. |
| 8 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm including making good of jambs of opening with rendering in cement mortar 1:4, complete all as specified and directed. |
| 9 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube as per specification & drawing. |
| 10 | S&FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 11 | S&F pressed steel framesof size 105mm x 60mm made outof size 1.25mm thick MS sheet for doorssingle rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixinglugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 complete all as Specified. |
| 12 | M&L for 30 mm thick Flush shutters, solid core construction,with block board core and plywood face panels, commercial type on both side etc complete all as specified and directed |
| 13 | Material & labourfactory made steel windows double shutter box type, outer frame made out of ERW TUBE \"P\" section(60x45x25mm) and shutters of ERW TUBE \"P\" section (50x35x20mm) operable shutters side hung includingpistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of \"Z\" section as specified complete with sash bars dove tailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/opening for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specified and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge.NOTE: The quoted rate against this item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/concrete surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs. |
| 14 | All as per above Item No. 13 but in ventilators of any size complete all as specified and directed |
| 15 | S&F of 4.0 mmthick sheet glass, ordinary qualityand size n.exc 0.50 Sqmand fixed to door/window shutter and partition wall by means of glazing clips rubber strips etc complete all as specified and directed. |
| 16 | S&F of 4.0 mmthick sheet glass ,ordinary qualityand size exc 0.50 Sqmand fixed to door/window shutter and partition wall by means of glazing clips rubber strips etc.complete all as specified and directed. |
| 17 | Supply and fixing4.8mm thick (minimum) glass sheet selected quality coloured/tinted/ground or obscured or frosted, on one sideand glazed in squares, not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 19 | M&L machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 20 | M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 21 | Material and labour glazed ceramic colouredDigital tiles in vertical surface300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 complete all as specified and directed. |
| 22 | Material and labourNon - skid DigitalCeramicjoint lesscoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 23 | Material and labourNon - skid DigitalCeramicjoint lesscoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 24 | All as per Item No 23 above but as in vertical surfaces as in dado/skirting over and including rendering 10mm thickbacking coat in CM 1:4, etc complete all as specified and as directed |
| 25 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting,complete all as specified and directed. |
| 26 | M & L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed. |
| 27 | Dismantling boarding, any description, fixed in any position with screwscomplete all as specified and directed. |
| 28 | M&L in replacement of E-boards, ceiling, 4mm thick withframed work with main Tee of size 24 x 28.5 mm made out of PGI sheet 3mm thick double at web and single at flange, flange coveredwith powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated ceiling, pre-painted ceiling boards 60cm x 60cm x 4 mm thick, suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel raw/plug @ 600mm C/C ceiling board shall be pressed to the ceiling tee with staple clips at all four sides incl making good all the disturbed portion complete all as specified and directed. |
| 29 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed . |
| 30 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 31 | S & FPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 32 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 33 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 34 | S&F tubular steel trusses including special shape washers etc. including forcolumns complete using ERW or induction butt welded tubesconfirming to IS -1239 -1997 GRADE ST-240 complete all as specified and directed. |
| 35 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for |
| 36 | M&L for formwork to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, etc for rough finished flat surfaces of concrete complete all as specified and directed |
| 37 | M&L for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels complete all as specified and directed.(Note: Steel reinforcement shall be measured & paid separately) |
| 38 | M&L for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 39 | Demolition of un-reinforced concrete in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing rubbish to out side MoD land complete all as specified and directed. |
| 40 | M & L for providing cement concrete type-C-11:3:6 (using 20 mm grade stone aggregate) as in plinth protection or similar work finished even and smoothcomplete all as specified and directed. |
| 41 | M&L Chequered cement concrete tiles 30cmx30cmx 25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment, complete all as specified and directed. |
| 42 | M&L Chequered cement concrete tiles 30cmx30cmx 25mm thick set jointed and pointed in neat cement slurry on vertical surfaces as in skirtings, dados and risers of steps with grey cement and pigment, complete all as specified and directed. |
| 43 | M & L for providing 75 mm thick cement concrete type-B-11:2:4 (using 20 mm graded stone aggregate) as in floor finished even and faircomplete all as specified and directed. |
| 44 | S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and type B-22 etc complete all as specified and directed. |
| 45 | S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed. |
| 46 | S & F200 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 47 | S & F of 125mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 48 | S & F of250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 49 | Taking up or down15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 50 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 51 | Cutting chases, forwater tubing or concealed, etc, and making good to facings where required and plastering in cement mortar (1:3)cutting not exceeding 10cm girth in brick walls complete all as specified and directed. |
| 52 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 53 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 54 | S&F in replacement of 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 55 | S&F in replacement 15mm Bib with wall flange, chromium plated fancy type long shank screwed for Iron Pipe or for brass ferrule complete all as specified and as directed. |
| 56 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 57 | S&F in repair vitreous china squatting pan Orrisa Pattern size 580x440 mm white with integral foot rest complete all as specified and directed including lime concrete bedding complete all as specified and directed. |
| 58 | S&F in repairPVC flushing cistern 10 ltrs capacity valve less syphonic action type low level complete with inlet valve handles including brackets, chromium plate brass flush pipe 32 mm dia PVC connection and including taking down old high level cistern complete all as specified and directed. |
| 59 | S & F CP brass Soap dish, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 60 | S & F in repair vitreous china Urinal, half stall type, white (including waste pipes) etc complete all as specified and directed. |
| 61 | S & Fin repair 25mm dia, stainless steel curtain rods including brackets and latto complete all as specified and directed. |
| 62 | S&Fin replacement of 15mm boreStop valves, cast copper alloy, fancy type, chromium plated with long shankandcup (concealed type) screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed, complete all as specified and directed. |
| 63 | S&F in replacement of Tubular towel rail, 20mm dia, D type, 60cm long between flangescomplete all as specified and directed. |
| 64 | Dismantling water tanks and removing to store of water storage tanks (Capacity 500 ltr to 1000 ltr ) complete all as specified and directed. |
| 65 | Dismantling water tanks and removing to store of water storage tanks (Capacity 250 ltr to 500 ltr ) complete all as specified and directed. |
| 66 | Supply and fixingRotational moulded polyethylene water storage tanks of1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified and directed. Make : Vectus,Sintex, Sheetal. |
| 67 | Supply and fixingRotational moulded polyethylene water storage tanks of 500 litres capacity, (cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified and directed.Make : Vectus, Sintex, Sheetal. |
| 68 | Taking down existing cementplaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 69 | M&L for rendering 5 mm thickon ceiling surfaces in cement mortar 1:3 and finished smooth and even without using extra cement complete all as specified and directed. |
| 70 | M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 71 | M&L for preparing old plastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed. |
| 72 | M&L for complete removal of existing treatment from surfaces of RCC/stone/concrete/brick walls of any description including preparation of scraped surface by removing all depression and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and includingpriming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified and directed including necessary scaffolding arrangement. |
| 73 | M&L for Rendering 15mm thick on brick walling in CM(1:4) ,finished even and smooth without using extra cement complete all as specifiedincluding necessary scaffolding arrangement and as directed. |
| 74 | M&L for preparation of newly plastered surfaces applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and includingpriming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed. |
| 75 | M & L for rendering 10 mm thick cement plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces as on chajja, facia and the like, finished even and fair without using extra cement complete all as specifiedincluding necessary scaffolding arrangement and as directed. |
| 76 | M&L for preparing newly plastered surfaces of walls and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 1mm to 2mm thick wall care putty, complete all as specified and directed. |
| 77 | M&L for Complete removal of existing treatment on surface of wall and applying 2 coats of oil bound distemperemulsion including a coat of alkali resistant primer over 1mm to 2mm thick wall care putty, complete all as specified and directed. |
| 78 | M & L for complete removal of existing paint for preparing ofzinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, from steel surfaces of CGI or PGI sheets/rolling shutters of any description over 10 cm width or girth and applying two coats of synthetic enamel paint as throughout base coat over a coat of red oxide primer and two additional coats of synthetic enamel paint as in patches of different colours for making camouflage pattern as directed at site as per existing pattern complete all as specified including necessary scaffolding arrangement and as directed. |
| 79 | Dismantling of cast iron/PVC Pipe 75mm to 150mm dia or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 80 | Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors, complete all as specified and as directed. |
| 81 | Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ringjoints fixedto wallsincluding stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center, complete all as specified and as directed. |
| 82 | Supply and fixing UPVC (SWR)type B pipes 75 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors, complete all as specified and as directed. |
| 83 | Supply and fixing UPVC(SWR)type B pipes 75 mm bore single socketed, in any length with rubber ringjoints fixedto wallsincluding stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center, complete all as specified and as directed. |
| 84 | Supply and fixing, UPVC (SWR) , bends for75 mm bore , complete all as specified and as directed. |
| 85 | Supply and fixing, UPVC (SWR) , bends with access doorfor75 mm bore , complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex |
| 86 | Supply and fixing, UPVC(SWR) , bendsfor110 mm borecomplete all as specified and as directed. |
| 87 | Supply and fixing, UPVC(SWR) , bends with access door, for110 mm borecomplete all as specified and as directed. |
| 88 | Supply and fixing, UPVC(SWR), junction single,(single \"T\") with access door equal or unequal for 75 mm bore , complete all as specified and as directed. |
| 89 | Supply and fixing, UPVC(SWR), junction single,(single \"T\") with access door equal or unequal for 110 mm bore, complete all as specified and as directed. |
| 90 | S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified and directed. |
| 91 | Supply and fixing in repair UPVC (SWR) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 92 | S&F in repair,UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 93 | Dismantling of brickwork/stone boulder masonry built in cement mortar including all quoins, arches,pillars,etc. complete all as specified and as directed. |
| 94 | M&L forstonewalling of random rubble stone masonary, uncoursed, well bounded, bedded & solidely hearted built in cement mortar (1:6) using locally available best stone complete all as specified and directed |
| 95 | All as per Item No 94 above but except stone (stone shall be obtained from demolition all as directed by EIC. |
| 96 | Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for RR walling uncoursed or brought upto courseshammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm for lime or sand stone complete all as specified and directed. |
| 97 | M&L for raised pointing to RR or Polygon rubble uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed. |
| 98 | Removing mortar from and cleaning stonesobtained from stone masonary of any description (except ashlar facings and dressed stonework stacking formeasurementincluding all extra handlingcomplete all as specified and directed by EIC. |
| 99 | M&L brick work with sub class \"B\" bricks old size best quality bricks straight or curved on plan exc 6m mean radius built in CM (1:4) all as specified and directed. |
| 100 | M & L Cement concrete type B1 (1:2:4) (20 mm graded stone aggregate) in surface channels and drains etc complete all as specified and directed. |
| 101 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed. |
| 102 | M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping benching including necessary form work complete all as specified and directed. |
| 103 | Taking down of old/unserviceable kitchen cabinet/cupboard including all fixture and fitting, complete all as specified and directed.Note: For measurement superficial area in elevation shall be measured. |
| 104 | M&L for 18 mm thick PVC board one side UV printed designing and back side plain colour printed for cup board boxes or kitchen cabinet with shelf, drawer, shutter and frame full size fitted under cooking platform and other platform including fittings etc complete all as specified and directed. |
| 105 | S&F stainless steel L hinges complete all as specified and directed. |
| 106 | S&F stainless steel handles 100 mm long fabricated type, bright polished decorative type fixed with brass screws complete all as specified and directed. |
| 107 | S&F magnetic catcher complete all as specified and directed. |
| 108 | S&F in replacement of25mm thick 2nd class hardwood boarding, clean sawn, fixed with screw in ceilingincluding dismantling old and decayed in patches or whole including cutting out old, piecing, heading joints etc and removing dismantling boarding to store etc complete all as specified and as directed |
| 109 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should bemade as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. |
| 110 | M&L for point wiring complete with FRLS PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wireto common earth dolly in and including cutting/chasing on brick wall not exc. 10 cm girth (excluding ceiling surface for existing pipe) and supply and fixing concealedPVC conduit pipe medium grade of nominal size 20 mm dia along with connected fittings/junction boxes and sunkenterminal boxes pressed MS/GI steel terminal boxes not less than 1.20 mm thick for mounting switch, socket etc including 3 mm thick Hylam brand sunmicalaminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and matching surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface complete all as specified and directed and suitable for the following: - |
| 111 | One light point or one fan point controlled by one way, single pole switch |
| 112 | One 3 pin socket outlet, 6 Amp on “independent board” |
| 113 | All as per item No. 110 here in above butpoint wiring using 2.5 Sqmm (Nominal area) FRLS PVC insulated unsheathed copperconductor 1100 volts for one 3/6 pin socket outlet, suitable for 6/16 amps on “independent board” with 1.5 Sqmm with one single run copper wire as continuous earth wireto common earth dolly complete all as specified and directed. |
| 114 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 115 | Supply & Fixing switch piano flush button type, 6 Amp one way, 240 Volt, single pole, ISI marked conforming to IS 3854 style single colour series with complete all as specified and directed. |
| 116 | Supply & Fixing socket out let, 2 in 1, 5 pin, 6 Amp, 240 Volt AC, flush type, style single colour series with complete all as specified and directed. |
| 117 | Supply & Fixing switch multipurpose 5 in 1, 6 pin, 6 and 16 Amp, 240 Volt AC, style with singlecolour series\" complete all as specified and directed. |
| 118 | Supply & Fixing socket multipurpose 5 in 1, 6 pin, 6 and 16 Amp, 240 Volt AC, style with singlecolour series\" complete all as specified and directed. |
| 119 | Supply & Fixing Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed. |
| 120 | Supply only SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, confirming to IS 13032 & 8623 complete all as specified and directed.Cat No. Indo Asian optipro/Schneider (Electric)/Legrand or equivalent. |
| 121 | Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity \"C\" Series,\" ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. |
| 122 | Supply only MCB SPN, 40 to 65 Amps 240 volts, AC , 10 KA breaking capacity \"C\" Series,\" ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. |
| 123 | Supply and fixing in replacement PVC conduit of size 25 mm by Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusiveof all tees, bends ,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed. |
| 124 | M & L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 4.00 Sqmm FR PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments and drawing in PVC rigid conduit, connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect all as specified and directed. Note :- 1.Two run of single core cable with one run of continuous earth wire of copper conductor wire Flexible (Multistrand) of FR PVC insulated shall be measured and paid as one unit length.2.PVC conduit pipe with fitting shall be measured and paid separately . |
| 125 | S&F in replacement PVC conduit by Non Metallic Rigid PVC conduit, ISI Marked, conforming to IS 9537, medium grade of size 25 mm dia including all fittings like bends, elbow reducer, junction boxes, tee bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete including Cutting & Chasing required on brick wall not exceeding 10 cm girth for concealed conduit wiring and making good to disturbed surface with cement mortar 1:3 and distemper / colour wash etc to match with existing surfacesincluding facing / finishing complete all as specified and directed. |
| 126 | M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 metre below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4.0mm by means of bolts nuts check nuts and protection with 50 mm dia GI Medium grade pipe and washers of galvanised iron or steel, GI strip 7.5 mtr long and plate surrounded with salt charcoal dust etc and 20 mm bore GI light grade pipe for watering, excavation and earth wire including PCC pit in cement concrete 1:3:6 type CI and 40mm thick pit cover of RCC 1:2:4 type 30 reinforced width 8mm dia MS bar @ 150 C/C both ways, furnel wiremesh and testing after completion complete all as specified and directed. |
| 127 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 128 | Material and labour for repairingof pre fab structured static water tank of capacity of 75000 litres, which includethe packing materials and insulating material and adhesives to arrest the leakage in tank by opening the old nut bolts with spanner and some other specific tools and by opening the panel and making good surfaces and with the help of adhesive gasket will be fixed on the properly rubbed surface and make all the joints leak proof, if any nut bolts washers get damaged or rusted need to be replacedby contractor in all surfaces of water tank , and refixing the panel at specific location all as specified and directed |
| 129 | Material and labour for repairingof pre fab structured static water tank of capacity of 25000 litres, which includethe packing materials and insulating material and adhesives to arrest the leakage in tank by opening the old nut bolts with spanner and some other specific tools and by opening the panel and making good surfaces and with the help of adhesive gasket will be fixed on the properly rubbed surface and make all the joints leak proof, if any nut bolts washers get damaged or rusted need to be replacedby contractor in all surfaces of water tank , and refixing the panel at specific location all as specified and directed. |
| 130 | Material and labour for repairingof pre fab structured static water tank of capacity of 60000 litres, which includethe packing materials and insulating material and adhesives to arrest the leakage in tank by opening the old nut bolts with spanner and some other specific tools and by opening the panel and making good surfaces and with the help of adhesive gasket will be fixed on the properly rubbed surface and make all the joints leak proof, if any nut bolts washers get damaged or rusted need to be replacedby contractor in all surfaces of water tank, and refixing the panel at specific location all as specified and directed. |
