|
| 1 | Demolition of mud in roofs of any thickness including cement concrete of any description, and removal of debris at a distance exc 250m but not exc 500m and deposited where directed by Engineer-in-Charge. |
| 2 | M&L for 15 mm thick plaster in CM 1:4 over concrete surfaces of roofs finished even and smooth using extra cement with WPC @ 3% by weight of cement (WPC will be measured and paid seperately) |
| 3 | M&LforAPPbasedmodifiedpre fabricatedfivelayer3 mm thick andweighingnotlessthan3.6 Kg/Sqmwater proofing membrane reinforcedwithpolyesternon wovenfabricmatwith150 gm/Sqm blackfinishedwith compatibleprimerconformingto IS 3488 @ 0.30 Lit/ Sqm andbonding material85/25bitumen1.2 Kg/Sqmbefore layingmembranelaidbytorchapplicationsideoverlapof 75 mm andoverlapof 100 mm longtitudinally, At thejunctionof roof andparapet walla groveof 20 x 20mmshall be madeatthehtof100 mmandmembrane shall be inserted andsealedwithbituminious masticjoints/overlap shallve saledwithhotbitumen85/25 all as directedby Engineer-in-Charge. |
| 4 | Supply only integral water proofing compound ISI marked. |
| 5 | M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and no pigments as on roof, including 15mm thick screed bed in CM 1:6. complete all as specified . |
| 6 | Materialand labourfor plaincementconcrete PCC (1:2:4) type B1 using (20mm qraded aggregate)as in roofpaddingcompleteall as specified and directed |
| 7 | Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed. |
| 8 | M&Lforbrickwork with old size sub class\"B\"brick straightor curvedonplan exc6 m mean radiusand builtin cement mortar 1 : 6 .complete all as specified & directed |
| 9 | M&L for Anti termite treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed. |
| 10 | M&L for anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified & directed. |
| 11 | M&L for post construction treatment ATT invoids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & directed. |
| 12 | Dismantling stone and tiles of any description or thickness in floor aprons etc |
| 13 | M&L for Machine cut kota stone slab flooring 18-20mm thick over 15mm thick screed bed in CM 1:6laid and jointed with grey cement slurry mixed with pigment to match theshade of the slab including rubbing and polishing complete all as specified & directed |
| 14 | M&L for Kota stone slab 18-20mm thick in riser and tread of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 10mm thick rendering in CM 1:4 including rounding of edges of stone rubbing and polishing complete complete all as specifdied & directed |
| 15 | Material and labour for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as spd and directed |
| 16 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removal complete all as specified and directed. |
| 17 | Demolition of Cement concrete of any description in any position not otherwise specifically provided for sunkan floors including removal of debrish our of MOD land complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | M&L for 15mm thick cement plaster 1:4 with water proofing compound for sunkan floor treatmentfinishing even and fair without using extra cement complete all as specified and as directed by Engineer-In-Charge.(WPC will be paid separately). |
| 19 | M&L polythene , 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm as directed by Engineer-In-Charge. |
| 20 | M&L Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces all as specified and directed. |
| 21 | M&L cement concrete Type E2 1:5:10 (40mm graded crushed stone aggregate) in sunkan floor complete all as specified and as directed by Engineer-in-Charge. |
| 22 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.50mm graded crushed stone aggregate) in floorcomplete all as specified and as directed by Engineer-in-Charge. |
| 23 | Demolision of existing precast cement concrete jallies complete all as specified and as directed by Engineer-in-Charge |
| 24 | Supply and Fixingprecast cement concrete jallies, 35mm thick, type B0 1:2:4 (using 12.5mm graded crushed stone aggregate) including wire fabric set and jointed in cement mortor 1:6 complete all as directed by Engr-in -charge |
| 25 | M&L for non skid ceramic coloured tiles 7-8 mm thick, (square/rectangular) area of each tile exc. 0.11 but n.exc. 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete. |
| 26 | M & L for joint free glazed coloured ceramic coloured tiles of 350mm x 250mm x 7mm /450X 300X 7mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, all as specified and directed by engr-in charge. |
| 27 | M&L for 20mm thickGranite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including20 mm thick screed bed in CM 1:6 complete all as specified .Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd. |
| 28 | Taking down chowkhats with shutter without taking off shutters from the frames (area n. exc. 1.50 sqm each)complete all as specified & directed. |
| 29 | Supplying & fixing in opening solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheets re-inforced with MS tube Square tube, suppling & fixing in opening complete all as specified & directed |
| 30 | M&L factory made solid panel pvc door shutter 30mm thickconsisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail . paneling of plain colour PVC sheets to be filted in MSframe welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as spd. |
| 31 | Supply and fixing Mild steel butt hinges medium weight , clod rolled, 75mm, ISI marked, complete all as specified & directed. |
| 32 | Material & Labour barrel tower bolts aluminium anodised extruded section of size 100 mm complete all as specified & directed. |
| 33 | Supply and fixing aluminium fabricated type extruded handles of size 100mm complete all as specified & directed. |
| 34 | S&F Steel window 1.25mm thick box typeERW hollow P section of each frame size 60mmx25mm double rebated comprises of glazed & gausedSkelton shutterERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thickwith following fittings welded to the frame shutter :- (i)Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window (ii)Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.(iii) MS tower bolt 100mm long 2 No per leaf. (iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. (v) 10mm square Guard bar @ 10 cm c/c.(vi) Two coat of Synthetcitc enamel paint over one coat of primer (vii) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in glazed / gazed skelton shutter ofwindow(viii) 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5sqm in each pane fixed in glaxed / gazed skelton shutter of window.(ix) Fabrication and fixing arrangements as per specificationincluding taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.(x) Taking down also included in this same item |
| 35 | Taking down chowkhats with shutter without taking off shutters from the frames (area exc. 1.50 sqm but n. exc. 4.00 sqm each) incl making good the disturbed surfaces complete all as specified & directed. |
| 36 | Material & Labour for pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mmwelded with frame and making arrangement for fixing of door springincluding filling ofPCC 1:2:4 in hole of frame etccomplete all as specified. |
| 37 | Supply and fixing plain, framed, Plain framed, panelled shutter (two panel) 35 mm thick of 2nd class hardwood rail and stylewith lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed. |
| 38 | M&LFactory Made 35mm thick 2st class hard wood glazed & gauged skeleton shutters open rebated and prepared to received glass/gauge etc ( without sash bars) edges of framing plains chamfered or rounded fitted with cut and mitered bead for securing glass etc .all as specified .Note : - Wire mesh and glazing shall be measured and paid separatly in respected items . |
| 39 | S & F pressed steel factory made cupboard shutter with frame of 1.25 mm thick and shutter 1 mm thick PBI sheet with 6 nos 3. 15 mm thick and 100 mm long steel (hinges godrej patern ) locking arrangement incl 12 mm dia vertical rod incl spray painting in factory as approved pattern all as directed. |
| 40 | Material & Labour barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed. |
| 41 | Supply and fixing aluminium fabricated type extruded handles of size 150mm complete all as specified & directed. |
| 42 | Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts, fixed on plate or staple plate complete all as specified & directed. |
| 43 | Supply and fixing Mild steel butt hinges medium weight , clod rolled, 100 mm, ISI marked, complete all as specified & directed. |
| 44 | Supply and fixingin in repair 300 mm long aluminium anodised sliding door bolt fixedwith hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed. |
| 45 | Supply and fixing Galvanised mild steel wire cloth, in new doors and windows 0.56mmnominal dia of wire and avrg widh of aperature 1.18mm incl fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified & directed. |
| 46 | Supply and fixing Galvanised mild steel wire cloth,as in repairs, 0.56mmnominal dia of wire and avrg widh of aperature 1.18mm incl fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified & directed. |
| 47 | S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or with clip in squares n. exc. 0.50 sqm in each pane complete all as specified and as directed. |
| 48 | S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or with clip in squares exc. 0.50 sqm in each pane complete all as specified and as directed. |
| 49 | Materialand Labour for preparation of newsurfaces of wood & wood based surfaceof any description not otherwise described, over 10 cm width & girth and applyingtwo coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 50 | Materialand Labourfor preparation of newsteel & steel based surfaceof any description not otherwise described, over 10 cm width & girth and applying twocoat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 51 | Material & Labour for Plain Cement concrete type B-0 (1:2:4) using 12.5 mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed. |
| 52 | Taking up or down 15 mm dia steel tubing and connectionand removal from site complete all as specified and directed. |
| 53 | Taking up or down 20 mm dia steel tubing and connectionand removal from site complete all as specified and directed. |
| 54 | Supply and fixing 15mm bore tubes \"medium grade\" galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as specified & directed. |
| 55 | Supply and fixing 20mm bore tubes \"medium grade\" galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as specified & directed. |
| 56 | S&F as in repair fancy typepillar taps of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered \"hot\" or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 57 | Supply and fixingin repairs long body Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe complete all as specified and directed. |
| 58 | Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n.exc. 10cm girth in brick walls all as directed. |
| 59 | Supply and fixing in repairs fancy type angle stop valve half turn type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 60 | Supply& fixing in PVC connections 15mm size with PTMTnuts of length 450 mmcomplete all as specified anddirected. |
| 61 | Supply and fixing as in repair vitreous China squatting pan \"Orissa\" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap, and to flushing pipe, anti-siphonage pipe, etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed. |
| 62 | Supply and fixing as in repair PVC valve less siphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified & directed. |
| 63 | Supply& fixingas in repair vitreous China wash hand basin, white flat back, size 300mm x 450mm including pillar tap 15mm diachromium plated with capstan head with long screwed shanks and fly nuts, and brass chromium plated waste coupling 32mm dia complete all as specified & directed. |
| 64 | S&F as in repairs vitreous China pedestal pattern, \"WC\" incl connection to trap Por S type 100 mm dia , and to flushing pipe anti-siphonage pipe, etc. complete, andsealing the joint withleadall as specified and directed. |
| 65 | S&Fas in repairs Chromium plated shower roses 125 mm size fixed with swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 66 | S&F as in repairs 110 mm dia mild steel chromium plated gratingwith waste pipe hole as per requirementcomplete all as specified and directed. |
| 67 | S&F in repair tubular towel Rail 20 mm dia of brass chromium plated complete all as specified and directed. |
| 68 | S&F in repair curtain road 30mm dia of brass chromium plated complete all as specified and directed |
| 69 | S&F in repair soap dish vitreous China white, approximate size 160x 160x90mm , any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 70 | M&L for gunniting work to RCC work in column, flooring, walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95 X 95 X 3 mm adhesive, plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 40 mm and making the surface even including 15mm thick plastering in CM 1:4 on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement including necessary form work to be carried out as specified and directed. |
| 71 | Material and labour for repairing of RCC projection, chajjas, facia, bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion of RCC at any height and in any situation / floor (including provn of support,formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling 1stcoat of 20 to 25mm thick in cm 1:3 finished rough and finishing coat of 10mm thick in cm 1:3finished even and smooth without using extra cement after applying cement slurry@ 3.00 Kg/Sqm and applying two coats of exterior emulsion paint complete all as specified and directed.Note : (i) Unit rate of this items includes the cost of scaffolding, form work, necessary water proofing agent etc and nothing extra shall be paid on account of variation if heights as specified and directed. |
| 72 | Dismantling boarding any description fixed in any position with screws as specified and directed. |
| 73 | S/F 18/19mm thick prelaminated particle board interior grade prelaminated both side with decorative choice lamination & other side balancing white lamination fixed with screwscomplete all as specified and directed by Engr-in-Charge |
| 74 | Taking down cement plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 75 | Material and labourrendering 15 mm in cement mortar 1:6 on fair faces of brickor concrete surfaces and finishing the surfaceseven and fair without using extra cement complete all as specified and directed. |
| 76 | M&L rendering 15mm in cement mortar 1:4 on fair faces of brick / concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and directed. |
| 77 | M&L rendering 5 mm in cement mortar 1:3 on fair faces of brick /concrete surface of ceiling and finishing the surfaces even and fair without using extra cement complete all as specified and directed. |
| 78 | M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed. |
| 79 | M&L preparation of newly plastered surfaces of ceiling / chajja or similar suspended work and applyingthree coats of white wash complete all as specified and directed. |
| 80 | M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint in camouflage / plain pattern of approved tint / shade(s) over a coat ofwater based primer complete all as specified and directed. |
| 81 | Material and Labour for preparation of plastered or unplastered old surfaces of walls and two coat of oil bound distemper on walls all as specified and as directed by Engr-in-Charge. |
| 82 | Material and Labour for preparation of plastered or unplastered old surfaces of ceilingand two coat of white wash on ceiling all as specified and as directed by Engr-in-Charge. |
| 83 | M&L for for 2 mm thick wall care putty on wall complete all specified and directed |
| 84 | M&L for for 2 mm thick wall care putty on ceiling complete all specified and directed |
| 85 | Complete removalofexisting paint on old plastered surface of wall and applyingtwocoatofexterior emulsion weather proof paint completeall as specified and directedbyEngineer - in- charge. Note:- The work shall be carried out in building of height up to 10m including scaffolding and safety equipment. |
| 86 | Demolition of plain cement concrete in ground floor and paving n.exc. 15 cm thick below or above ground level complete all as specified & directed. |
| 87 | M&L for PCC(1:3:6) type C2 using 20mm graded aggregate as in plinth protectionof avg 75mm thick and finishing cement concrete surface even and smooth without using extra cement all as specified and directed |
| 88 | Supply and fixing 140 mm door stopperhanging type, consisting two leg aluminium anodised natural shade matt finishaluminium rod with rubber shoe complete all as specified |
| 89 | S&F as in repair 600x 450mm bevelled edge mirror of selected quality glass , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers . all as specified |
| 90 | S&F mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate including welding or screwing to MS frame complete all as specified and directed. |
| 91 | Material & Labour Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified. |
| 92 | Dismantling wrought iron or steel work of any description not other wise or as specified |
| 93 | M&L for steel work in tubular pipes as in vertical surfaces including special shaped washer such as column complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 |
| 94 | M&L for rolled section as in main and cross beam , hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates in Fe 290 Gde E-165 complete all as specified |
| 95 | S&F for plates (plain or chequered ) channels ,square cut or notched (ordinary and counter sunk) forming holes , without any attachment in Fe 290 Gde E-165 complete all as specified. |
| 96 | M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n. exc 10 cm long complete all as specified. |
| 97 | Dismantling of Plain sheet, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 98 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 99 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 100 | S&F as 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, complete all as specified. |
| 101 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified. |
| 102 | S&F as 110mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified. |
| 103 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required complete all as specified. |
| 104 | S&F 75mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvent cement as required complete all as specified. |
| 105 | S&F PVC (SWR) junction single, (Single T) equal or unequal with access door110 mm bore complete all as specified |
| 106 | S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified. |
| 107 | M&L for PVC (SWR) floor trap plain with CP grating including jointing with solvent cement outlet dia 110 mm in repair all as specified. |
| 108 | Dismantling water tanks and removing from site of anycapacity complete all as specified and directed. |
| 109 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)with three layers white colour includinghoisted and fixed in position all as specified in SSR Part-I. all as specified. |
| 110 | S&F in repair 20mm PTMT nipple suitable for HDPE water tank (minimum weight 15 mm-38gms/20mm-45gms/25mm-65gms) complete all as specified . |
| 111 | S&Fball valve high pressure of PTMT with epoxy coatedaluminium rod & high density plastic ball screwed for iron pipe20 mm dia. |
| 112 | Supply and fixing in repairsGun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe, fixed as in repair complete all as specified and directed. |
| 113 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified. |
| 114 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified. |
| 115 | M & L forPoint wiring on concealed conduit with 1.5 Sq mm copper conductor single core PVC insulated unsheathed 1100 V grade multistranded drawn into and including rigid PVC conduit with accessories of suitable dia medium grade concealed in walls/floors and pressed steel terminal boxes MS, duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated sheet including one running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified. |
| 116 | One light point controlled by one, one way switch 6 A, SP |
| 117 | One ceiling fan/exhaust fan point controlled by one, one way switch |
| 118 | One light point controlled by two nos, 2-way, 6 Amps switch. |
| 119 | One 3 point 6 Amps switch socket outlet point controlled by one switch on the same board. |
| 120 | One 3 pin 6 Amps switch socket outlet point controlled by one switch on independent board. |
| 121 | Description all as per item No 3 here-in-before but using 4.0 Sq mm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps switch socket combination point including running of 4.0 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 122 | S & F Switch pianotype single pole one way flush type 6 Amps capacity 230 volts. |
| 123 | S&F of Switch piano type, single pole, two way, 230 volts, complete all as specified and directed. |
| 124 | S&F of Socket, two-in-one, 5 pin, 6 Amp, 230 volts, complete all as specified and directed. |
| 125 | S & Fixing of switch socket combination 2 in 1 multipurpose 2/3 pin 6 Amps flush type complete all as specified. |
| 126 | S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universalcomplete all as specified |
| 127 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified. |
| 128 | S&F of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed. |
| 129 | S&F LED lamp 9W complete all as specified and directed by the Engineer-in-Charge. |
| 130 | Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 131 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 132 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size |
| 133 | Supply and fix stepped type electronic ceiling fan regulator AC230 Voltssuitable for 1200 / 1400 mm sweep complete all as specified. |
| 134 | Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed |
| 135 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps |
| 136 | Supply and laying sub main wiring complete with 05 runs ( 3 nos for three phase, Neutral & Earthing ) of single core 10 sqmm fire retardant low smoke (FRLS)PVC insulated copper conductor cable multistranded and sheathedLT 1100 V grade drawn through and including concealed rigid PVCconduit of suitable dia ISI marked andaccessories surface fixedon wall /flooretc all as specified. Note:- 05 runs of cable 01 metre 01 run of PVC conduit shall be considered as one unit for measurement purposes. |
| 137 | M & L for Submain wiring with two single core 10 Sq mm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn in and including concealed rigid PVC conduit of suitable dia, conduit fittings and accessories concealed in wall/floor with one run of 10 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note 1: Two runs of 10 Sqmm cable, one run of 10 Sqmm earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. |
| 138 | M & L for Submain wiring with two single core 4.0 Sq mm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn in and including concealed rigid PVC conduit of suitable dia, conduit fittings and accessories concealed in wall/floor with one run of 4.0 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note 1: Two runs of 4.0 Sqmm cable, one run of 4.0 Sqmm earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. |
| 139 | Supply and fixing as in repairs Vertical TPN DB double door, IP 45 protection with powder coated enclosure 8 way insulated busbar assembly suitable for fixing MCCB 4 pole, 415 V, 125A, 16 kA - 01 No complete all as specified and directed.Make : IndoAsian(Optipro) / Legrand/ ABB (Note: MCCB and MCB shall be of same make as of DB) |
| 140 | Supply and fixing as in repairs TPN DB double door, IP 45 protection with powder coated enclosure 6 way insulated bus bar complete all as specified and directed.Make : IndoAsian/ Legrand/ ABB (Note: MCB shall be of same make as of DB) |
| 141 | Supply and fixing sheet Metal enclosure double door type for DB’s 240 Volts Single Pole and Neutral 12 way with 200 Amps rated bus bar complete all as specified andas directed |
| 142 | Supply and fixing MCCB 3 Pole, 415 V, fixed type, 125AAmps with breaking capacity 16 KA,complete all as specified andas directed |
| 143 | Supply and fixing MCB, 4 Pole, 63Amp, 415V 10KA \"C\" curve, complete with connection testing and commissioning. |
| 144 | Supply and fixing MCB SPN 40-63Amps , 240 volt, 10 KA,complete all as specified andas directed |
| 145 | Supply and fixing MCB single pole 6 to 32 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge. |
| 146 | Supply & fixexhaust fans AC single phase 230/ 240 V of size 300 mm sweep, metal body with louver including making of hole to the wall and making good the disturbed surface complete |
| 147 | Supply and fixing Energy saving and environmental friendly long life 35W LED bldg security light having IP66 protection complete with all accessories incl three run of 1.5 Sqmm Copper conductor cable from security light to ceiling rose complete |
| 148 | Supply and fixing GI pipe bracket made of 40 mm bore light grade pipe made to shape of overall length of 1.2 mtr for fixing of security light fittingincluding MS clamps , nuts & bolts of required size complete |
| 149 | Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth lead 4mm dia, by means of nuts, bolts,check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth elelctrode to DBs/main switchincl provn of concrete pit in PCC , GI pipelight grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoalwith fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr complete all as specified and directed. |
