|
| 1 | Demolition of brickwork or stone masonary built in cement mortar or cement lime mortar complete all as specified and directed. |
| 2 | Material & Labour for precast cement concrete 1:3:6, type C-1, (20mm graded stone aggregate ) masonary with solid blocks, exc 10cm in widthand setting in cement mortar (1:6) complete all as specified and directed. |
| 3 | All as per item No 2 above but except block using blocks recovered from demolition complete all as specified and directed. |
| 4 | Material & Labour for Cement concrete 1:2:4 type B2 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 5 | Extra for fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 6 | Material & Labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed |
| 7 | Supply & fix mild steel work in framed work such as grills framed guard bars, gratings, ladders etc with ends of bars shouldered and / or riveted or forged into spikes and similar work complete all as specified and directed. |
| 8 | Material & Labour for Reinforced concrete pipes, class NP 2,200mm dia laid and jointed complete with or withoutcollars complete all as specified and directed. |
| 9 | Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 10 | Material & Labour for cement concrete 1:4:8 type D-2, (40mm graded stone aggregate) 75 mm thick sub base or similar items complete all as specified and directed. |
| 11 | Material & Labour for Sand filling under floors or in foundationincluding watering and consolidation complete all as specified and directed. |
| 12 | Material & Labour for 80mm thick coloured rubburised, glossy finish machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-40 Grade complete all as specified and directed by Engineer-in Charge. |
| 13 | Supply & fix Pre Polished Chequered cement concrete tiles glossy and rubburised finish 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:6 under tilescomplete all as specified and directed by Engineer-in Charge. |
| 14 | Material & Labour for PCC 1:3:6type C-1 ( 20 mm graded stone aggregate), 75 mm thickas in plinth protection, Path, floorcomplete all as specified and directed. |
| 15 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed. |
| 16 | Material & Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 complete all as specified and as directed. |
| 17 | Material & Labour for preparation of new and including undecorated surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 18 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 19 | Material & Labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240complete all as specified and directed. |
| 20 | Supply & fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws including dismantling of old Roof sheet CGI/ PGI Sheet as specified and directed by Engineer-in-charge. |
| 21 | Supply & fix Pre-painted galvalume aluminum zinc coating GI basedPlainsteelsheet 0.50mm thick of any colourhaving tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tappingscrewsincluding dismantling of old Roof sheet CGI/ PGI Sheet complete all as specified and directed. |
| 22 | Supply & fixfiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc. including dismantling of old Roof sheet CGI/ PGI Sheet complete all as specified and directed. |
| 23 | Material & Labour for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over and including a coat of red oxide primer complete all as specified and as directed. |
| 24 | Dismantling wall and ceiling boards (Fiber pulp, insulation etc or insulation boards any thickness including cover fillets complete all as specified and as directed. |
| 25 | Material & Labour for false ceiling of plain gypsum board 12mm thick including frame made out of MSGI BPS grade angle 24mmx24mmx0.35mm, ‘T’ section 24mmx25mmx0.30mm and main runner ‘T’ section 24mmx38mmx0.43mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c, hanging with 2.50 mm/3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with painting two coats of oil bound distemper over and including one coat of primer and preparation of surface complete all as specified and directed by the Engr-in-charge |
| 26 | Supply & fix POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling junction complete all as specified and directed. |
| 27 | Material & Labour for 10mm thick PVCpanels 600mmx600mm with EPS stuck to 1mm printed PVC sheet suitable placed in and including flase ceiling grid made of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web 27 mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2mtr length) of 0.55 mm fixed to the intermediate channel with connecting clips across the intermediate channel with connecting clips across the intermediate channel at 457 mm centre ot centre. Hangers 6 mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40mmx3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling of any type of ceiling complete all as specified and directed. |
| 28 | Supply & fix PVC wall lining (Paneling) consisting of 5mm thick wood grain printed & coloured PVC Sheet inclusive of solvent cement and fixing at wall on PVC frame as per manufacturers instruction complete all as directed by the Engr-in-Charge. |
| 29 | Supply & fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall and make PVC frame/grid as per manufacturers instruction complete all as directed by the Engr-in-Charge. |
| 30 | Material & Labour for snap grid ceiling with 19mm thicksemi - perforated edge 60cmx60cmin ceiling board over and including GIgrid prelude XL 24 mm gridmain runner height 37mm and secondary runner height 30mm including 2.6mm/2.8mm GI wire suspenders of suitable length as per manufacturers instructions complete all as specified and directed . |
