|
| 1 | Excavation in trenches not exceeding 1.5 mtr width and not exceeding 1.5 mtr deep, in any type of soil including forming sides and bottom surfaces to required level / slope / gradients etc for taking down/laying of the pipe lines complete all as specified and directed by Engineer in charge.Note: The disturbed surfaces of roads/paths/plinth etc shall be made good by the contractor to match with the existing surfaces without any extra cost). |
| 2 | Returning, fillingin, excavated soil in trenches, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. |
| 3 | Removing of excavated surplus soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 4 | Disconnecting and taking down old existing steel tubing and connections of any description/ grade and in any position in trenches/under floors / on walls etc including all fittings/accessories and fixtures such as bends, union,elbow socket etc, all as directed and specified for the following sizes :- |
| 5 | 80 mm bore |
| 6 | 50 mm bore |
| 7 | 40 mm bore |
| 8 | 25 mm bore |
| 9 | 20 mm bore |
| 10 | 15 mm boreNote :- Excavation & earth work shall be measured and paid separetely under respective item of Sch \"A\". |
| 11 | Laying Only galvanized iron water tubing, medium grade, including allnecessary GI fittings /accessories laid in trenches complete all as specified and directed for the following sizes:(Old serviceable pipes retrieved from iem no 4 shall be reused. |
| 12 | 80 mm bore |
| 13 | 50 mm bore |
| 14 | 40 mm bore |
| 15 | 25 mm bore |
| 16 | 20 mm bore |
| 17 | 15 mm bore |
| 18 | Supply, laying, jointing and testinggalvanized iron water tubing, medium grade, including allnecessary GI fittings /accessories laid in trenches complete all as specified and directed for the following sizes |
| 19 | 80 mm bore |
| 20 | 50 mm bore |
| 21 | 40 mm bore |
| 22 | 25 mm bore |
| 23 | 20 mm bore |
| 24 | 15 mm bore |
| 25 | Disconnecting and taking down old existing cast iron/DI pipe line/ water main and connections of any description/ grade including lead if any and in any position in trenches/under floors / etc including all fittings/accessories and fixtures such as bends, union,elbow socket etc, all as directed and specified for the following sizes :- |
| 26 | 150 mm bore |
| 27 | 100 mm bore |
| 28 | 80 mm bore |
| 29 | Laying only ductile iron pipes complete all as specified and directed for the following size:- (Old serviceable CI/DI pipes retrieved from iem no 07 shall be reused.NOTE :- Earth work,and CI specials/ fittings of the pipes shall be measured and paid for separately under respective item of Schedule `A\". |
| 30 | 150 mm bore |
| 31 | 100 mm bore |
| 32 | 80 mm bore |
| 33 | Supplying ,laying, jointing & testing in trenches ductile iron pipes with spigot and socketed ends centrifugally cast (spun cast) class K-9 suitable for Titen jointscomplete all as specified and directed for the following size:- |
| 34 | 150 mm bore |
| 35 | 100 mm bore |
| 36 | 80 mm bore NOTE :- Earth work,and CI specials/ fittings of the pipes shall be measured and paid for separately under respective item of Schedule `A\". |
| 37 | S&F in repair forISI Marked, gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe complete all as specified and directed for following bore of pipes:-- |
| 38 | 50 mm bore |
| 39 | 40 mm bore |
| 40 | 25 mm bore |
| 41 | 20 mm bore |
| 42 | 15 mm bore |
| 43 | S&F in repair for 15mm dia bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed |
| 44 | Supplying, fixing, jointing and testingof GI fitting of any size upto 15 mm dia to 80 mm dia pipe like union, Tee, long , nipple, bend , male / female socket, dead cap , elbow all as specified and directed by Engr - in charge |
| 45 | Supply, installation, fixing, jointing and testing, ISI Marked, cast iron sluice valve of class PN-1.6 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, jointedwith and including jointing material such as rubber or fibre gasket, nuts, bolts washers etc and tested including taking down old sluice valve complete all as specified and directed for following bores :- |
| 46 | 150 mm bore |
| 47 | 100 mm bore |
| 48 | 80 mm bore |
| 49 | S&F in repair 100mm bore, ISI Marked, cast iron non return valve, both ends flanged jointed and tested complete all as specified and directed |
| 50 | S&F in repair80 mm bore, ISI Marked, cast iron non return valve, both ends flanged jointed and tested complete all as specified and directed |
| 51 | Supplying, fixing, jointing and testingcast iron/ductile iron specials/fittings such as bend, tee, socket, color, Reducer, Tail Pieces etc. suitable for spigot and socketed/ flanged end pipesupto 150 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 52 | M&L for cutting of road/floorby electric hammer / mannual depth up to 1.5 mtr below the normal ground level of suitable size to lay pipe upto 150 mm dia pipe across the road in horizontal position complete all as directed by the Engr-in-Charge.. |
| 53 | M & L for cement plastering15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finish even and fair complete all as specified and directed. |
| 54 | M & L for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 55 | M & L for construction of valve chamber in replacement600 x 600 x 950 mm internal dimensions,6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6) 230 mm thick,PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces incl dismantling and removal of old unserviceble valve pit remains all as specified and directed by Engr in charge |
| 56 | Cutting and removing unwanted grass and wild growth including bushes and shrubs from the roots at various E&M installations including removing and levelling the entire area to even finish complete all as specified and directed at site. |
| 57 | Supply & fix in replacement ofsubmersible pumpof 20 Hp 3 phase AC 415 Volt, 13 stage suitable for suction line of 80 mm dia all as directed by Engr - in-Charge |
| 58 | Supply & fix in replacement ofsubmersible motorof 20 Hp 3 phase AC 415 Volt,suitable for 13 stage pumpof 80 mm dia suction line all as directed by Engr - in-Charge |
| 59 | Supply & fix in replacement ofsubmersible pumpof 17.5 Hp 3 phase AC 415 Volt, 13 stage suitable for suction line of 80 mm dia all as directed by Engr - in-Charge |
| 60 | Supply & fix in replacement ofsubmersible motorof 17.5 Hp 3 phase AC 415 Volt,suitable for 13 stage pumpof 80 mm dia suction line all as directed by Engr - in-Charge |
| 61 | M&L for drilling hole at a depth up to 1.8 mtr below the normal ground level of suitable size to insert upto150 mm dia pipe across the road in horizontal position complete all as directed by the Engr-in-Charge |
| 62 | S&F in repairflat copper conductor submersible cable of size 6 Sqmm, 3 core complete including necessary achoring accessies for fixing along the columm pipe etc all as specified and directed. |
| 63 | S&F in repairflat copper conductor submersible cable of size 4 Sqmm, 3 core complete including necessary achoring accessies for fixing along the columm pipe etc all as specified and directed. |
