Tender For Repair Replacement Maint Re-Routing Of Ci Di Gi Distribution System Including Ms Pipe Line Header And Connected Items At 2 Signal Coy And Ihq Tpt Coy, Sp Marg, Dk Ii Area, Nicholsan Range, Ridge And Rising Main Including Ms Pipe Line Head, Delhi-Delhi

TDR : 52785295

Tender Notice
BOQ

14 Days Left

Delhi , Delhi

Tender Brief : Tender For Repair Replacement Maint Re-Routing Of Ci Di Gi Distribution System Including Ms Pipe Line Header And Connected Items At 2 Signal Coy And Ihq Tpt Coy, Sp Marg, Dk Ii Area, Nicholsan Range, Ridge And Rising Main Including Ms Pipe Line Head

Document Fees
₹ 1000 /-

EMD
₹ 167500.0 /-

Tender Value
₹ 95 Lakhs /-

Submission Date
02-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep for pipe line in any type of soil getting out and levelling of bottom surface to required level complete all as specified and directed.
2	Excavation in trenches by cutting of road crossing, PCC hard standing for taking out/laying of pipe including making good the existing surface to match the original surface by using PCC 1:2:4 (using 20 mm graded stone aggregate) etc complete all as specified and directed.
3	Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
4	Removing excavated material from site to a distance not exc 50mtr away and depositing where directed at a level not exc 1.5mtr from the starting point complete all as specified and as directed.
5	Taking up existing CI/DI water mains ofthe followingbore size including all fittingscomplete all as specified andas directed :-
6	80 mm bore pipe.
7	100 mm bore pipe.
8	150 mm bore pipe.
9	200 mm bore pipe.
10	250 mm bore pipe.
11	300 mm bore pipe
12	400 mm bore pipe
13	600 mm bore pipe
14	Laying only, jointing, testing and commissioning ofCI/DI pipe of following bore (Dismantled above against srl item No. 5.01 to 5.08) into trenches in position complete all as specified and as directed.
15	80 mm bore pipe
16	100 mm bore pipe
17	150 mm bore pipe
18	200 mm bore pipe
19	250 mm bore pipe
20	300 mm bore pipe
21	400 mm bore pipe
22	600 mm bore pipe
23	Supplying, Laying, jointing, testing and commmisioning of DI Pipe of following sizes, with spigot and socketed ends centrifugally castClass K-7 Push on joint confirming to IS 8329laid in trenches with andincluding rubber tyton joints complete all as specified and as directed.
24	80 mm bore pipe
25	100 mm bore pipe
26	150 mm bore pipe
27	200 mm bore pipe
28	250 mm bore pipe
29	300 mm bore pipe
30	400 mm bore pipe
31	600 mm bore pipe
32	M&L for DI fittings for spigot/socket pipes such as bends of any radius and angle, collars, tapers, tail pieces, Tee pieces, caps and plugs suitable for above 150 mm bore dia of pipe complete all as specified and as directed.
33	Taking down existing unserviceable sluice valve offollowing sizes complete all as specified andas directed :-
34	80 mm bore
35	100 mm bore
36	150 mm bore
37	200 mm bore
38	250 mm bore
39	300 mm bore
40	400 mm bore
41	Supply and fixing, jointing and testing of cast iron Sluice ValveISI marked(PN-1.0) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets etc complete all as specified and as directed.
42	80 mm bore
43	100 mm bore
44	150 mm bore
45	200 mm bore
46	250 mm bore
47	300 mm bore
48	400 mm bore
49	Taking down existing unserviceable NRV offollowing sizes complete all as specified andas directed :-
50	80 mm bore
51	100 mm bore
52	150 mm bore
53	200 mm bore
54	250 mm bore
55	300 mm bore
56	Supply & Fixing, jointing and testing of cast iron NRVISI marked(PN-1.0) confirming to IS 5312, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets etc complete all as specified and as directed.
57	80 mm bore
58	100 mm bore
59	150 mm bore
60	200 mm bore
61	250 mm bore
62	300 mm bore
63	Taking down old unserviceable CI strainers of following sizes :-
64	100 mm bore
65	150 mm bore
66	200 mm bore
67	250 mm bore
68	300 mm bore
69	400 mm bore
70	Supplying and fixing Cast Iron flanged strainers of following sizes with stainless steel mesh in PN 1.0 ISI marked complete all as specified and as directed.
71	100 mm bore
72	150 mm bore
73	200 mm bore
74	250 mm bore
75	300 mm bore
76	400 mm bore
77	Taking down old unserviceable CI foot valve of any size
78	Supply and fixing Cast Iron foot valve flange ends, double door of size 300mm with rubber seal ISI Marked complete all as specified and as directed.
79	Supply and fixing Cast Iron foot valve flange ends single door of size 150mm with rubber seal ISI Marked complete all as specified and as directed.
80	Labour for cutting of existing CI / DI pipe for insertion of CI specials /valvesetc. all as required including dewatering of lekage water of following size :-
81	400 mm bore pipe.
82	300 mm bore pipe.
83	200 mm bore pipe.
84	Material and labour for Rubber Gasket Joint (tyton joint)including jointingmaterial for DI/CI pipe of following sizes, complete all as specified and as directed.
85	300 mm bore
86	200 mm bore
87	150 mm bore
88	100 mm bore
89	80 mm bore
90	Taking down old unserviceable MS (ERW) pipe of following sizes :-
91	400 mm dia pipe.
92	300 mm dia pipe.
93	250 mm dia pipe.
94	200 mm dia pipe.
95	150 mm dia pipe.
96	100 mm dia pipe.
97	Supply, laying jointing & testing, MS(ERW) pipe, (Heavy duty) ofthe following sizes,6.3 mm wall thickness confirming to IS - 3589 (1981) complete all as specified and as directed.
98	400 mm dia pipe.
99	300 mm dia pipe but thickness 5.6 mm.
100	250 mm dia pipe.
101	200 mm dia pipe.
102	150 mm dia pipe but thickness 4.5 mm.
103	100 mm dia pipe.
104	Supply and fixing welded flanges on ends of MS pipe of size 400mm bore, flange not less than 15m thick, complete all as specified and as directed.
105	Ditto, all as per item No. 22 but 300 mm bore of pipe.
106	Ditto, all as per item No. 22 but 250 mm bore of pipe.
107	Ditto, all as per item No. 22 but 200 mm bore of pipe.
108	Ditto, all as per item No. 22 but 150 mm bore of pipe.
109	Ditto, all as per item No. 22 but 100 mm bore of pipe.
110	M&L for Joints with rubber or fibre board gasket of 400 mm bore complete with nut,bolt and double washers.
111	Ditto all as per item No. 23 here-in-before but 300 mm bore
112	Ditto all as per item No. 23 here-in-before but 250 mm bore
113	Ditto all as per item No. 23 here-in-before but 200 mm bore
114	Ditto all as per item No. 23 here-in-before but 150 mm bore
115	Ditto all as per item No. 23 here-in-before but 100 mm bore
116	Ditto all as per item No. 23 here-in-before but 80 mm bore
117	Taking down/out GI pipe water mains of the following sizes including all fittings complete all as specified and directed.
118	15 mm bore of pipe.
119	20 mm bore of pipe.
120	25 mm bore of pipe.
121	40 mm bore of pipe.
122	50 mm bore of pipe.
123	Refixing/laying only for GI pipe in old or new position with all fittings after cleaning thoroughly and removal of scale/blockageseffectively complete all as specified and directed, (pipe obtained from item No 24.01 to 24.05 here-in-before) including all fittings complete of following sizes :-
124	15 mm bore of pipe.
125	20 mm bore of pipe.
126	25 mm bore of pipe.
127	40 mm bore of pipe.
128	50 mm bore of pipe.
129	Supply &laying GI pipe (medium grade) including all fittings in old/new position complete all as specified and as directed of following sizes :-
130	15 mm bore of pipe.
131	20 mm bore of pipe.
132	25 mm bore of pipe.
133	40 mm bore of pipe.
134	50 mm bore of pipe.
135	M&L for Brick work with sub class \"B\" bricks, straight or curved on plan, n.exc 6 mtr mean radius in CM (1:4) complete all as specified and as directed.
136	M&L for PCC (1:4:8) type D-2 finished even and smoooth without using extra cement for foundation etc, complete all as specified and as directed.
137	M&L for PCC (1:2:4) type B-2 finished even and smoooth without using extra cement complete all as specified and as directed.
138	M&L for Rendering plaster 10 mm thick plaster on brick work/concrete surface in cement mortar (1:4) finished even and smooth without using extra cement as specified.
139	Material and labour for MS works of any sizes of angles irons/flat iron/MS sheet works for U/G Sumps for making grills and stair steps etc. complete all as specified and as directed.
140	M&L for excavation in any type of soil through trenchless technology by HDD (Horizontal directional drilling method) including preparing and setting up the plant and equipment .Preparing new pipe work material including all related civil work and mechanical work like excavation, shoring/strutting etc drilling, stringing, reaming and pulling back the new pipe work on the path alignment proper disposal of drilling fluid and ground penetrating radar survey to protect any exiting utilities at the pipe installation location restoration of site agter completion all inclusive as per and STT IS No.2.3.2.2.2.2. second edition 2008 code of pactice for trenchless technology suiting Indian condition for making horizontal bore of size 450mm dia suitable for HDPE pipe insertion under road crossing /hard standing including HDPE pipe 400 mm nominal dia of 28.3 mm min. wall thickness of grade PE 80 for protection of MS/DI pipe to any sizeby manually or any means complete all as specified and directed.Note:- (a) MS Pipe/DI will be measured and paid for seprately under respective items.(b) Permission required from civil authrority/department prior to executing the work is the responsibility of contractor and the cost for the same shall be deemed to be included in unit rate quoted by the contractor.
141	Taking down/out unserviceable waltman type flow meter complete all as specified and directed of the following sizes :-
142	100 mm bore.
143	150 mm bore.
144	200 mm bore.
145	250 mm bore.
146	300 mm bore.
147	400 mm bore.
148	600 mm bore.
149	Supply and fixing of waltman type water flow meter class \"B\" conforming to IS :779/1994 complete all as specified and as directed.
150	100 mm bore.
151	150 mm bore.
152	200 mm bore.
153	250 mm bore.
154	300 mm bore.
155	400 mm bore.
156	600 mm bore.
157	Supply and fixing in renewal of MJ collar/ DI joint of following sizes, IS:9532 complete all as specified and as directed.
158	200 mm bore pipe.
159	300 mm bore pipe.
160	400 mm bore pipe.
161	600 mm bore pipe.
162	(xi) All existing earthing of the lifts shall be maintained and made fully functional by the contractor to the entire satisfaction of the Engr-in-Charge.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Delhi Tenders

Construction Tenders

Pipe Line Project Tenders

Pipe Laying Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair Replacement Maint Re-Routing Of Ci Di Gi Distribution System Including Ms Pipe Line Header And Connected Items At 2 Signal Coy And Ihq Tpt Coy, Sp Marg, Dk Ii Area, Nicholsan Range, Ridge And Rising Main Including Ms Pipe Line Head, Delhi-Delhi

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep for pipe line in any type of soil getting out and levelling of bottom surface to required level complete all as specified and directed.
2	Excavation in trenches by cutting of road crossing, PCC hard standing for taking out/laying of pipe including making good the existing surface to match the original surface by using PCC 1:2:4 (using 20 mm graded stone aggregate) etc complete all as specified and directed.
3	Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
4	Removing excavated material from site to a distance not exc 50mtr away and depositing where directed at a level not exc 1.5mtr from the starting point complete all as specified and as directed.
5	Taking up existing CI/DI water mains ofthe followingbore size including all fittingscomplete all as specified andas directed :-
6	80 mm bore pipe.
7	100 mm bore pipe.
8	150 mm bore pipe.
9	200 mm bore pipe.
10	250 mm bore pipe.
11	300 mm bore pipe
12	400 mm bore pipe
13	600 mm bore pipe
14	Laying only, jointing, testing and commissioning ofCI/DI pipe of following bore (Dismantled above against srl item No. 5.01 to 5.08) into trenches in position complete all as specified and as directed.
15	80 mm bore pipe
16	100 mm bore pipe
17	150 mm bore pipe
18	200 mm bore pipe
19	250 mm bore pipe
20	300 mm bore pipe
21	400 mm bore pipe
22	600 mm bore pipe
23	Supplying, Laying, jointing, testing and commmisioning of DI Pipe of following sizes, with spigot and socketed ends centrifugally castClass K-7 Push on joint confirming to IS 8329laid in trenches with andincluding rubber tyton joints complete all as specified and as directed.
24	80 mm bore pipe
25	100 mm bore pipe
26	150 mm bore pipe
27	200 mm bore pipe
28	250 mm bore pipe
29	300 mm bore pipe
30	400 mm bore pipe
31	600 mm bore pipe
32	M&L for DI fittings for spigot/socket pipes such as bends of any radius and angle, collars, tapers, tail pieces, Tee pieces, caps and plugs suitable for above 150 mm bore dia of pipe complete all as specified and as directed.
33	Taking down existing unserviceable sluice valve offollowing sizes complete all as specified andas directed :-
34	80 mm bore
35	100 mm bore
36	150 mm bore
37	200 mm bore
38	250 mm bore
39	300 mm bore
40	400 mm bore
41	Supply and fixing, jointing and testing of cast iron Sluice ValveISI marked(PN-1.0) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets etc complete all as specified and as directed.
42	80 mm bore
43	100 mm bore
44	150 mm bore
45	200 mm bore
46	250 mm bore
47	300 mm bore
48	400 mm bore
49	Taking down existing unserviceable NRV offollowing sizes complete all as specified andas directed :-
50	80 mm bore
51	100 mm bore
52	150 mm bore
53	200 mm bore
54	250 mm bore
55	300 mm bore
56	Supply & Fixing, jointing and testing of cast iron NRVISI marked(PN-1.0) confirming to IS 5312, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets etc complete all as specified and as directed.
57	80 mm bore
58	100 mm bore
59	150 mm bore
60	200 mm bore
61	250 mm bore
62	300 mm bore
63	Taking down old unserviceable CI strainers of following sizes :-
64	100 mm bore
65	150 mm bore
66	200 mm bore
67	250 mm bore
68	300 mm bore
69	400 mm bore
70	Supplying and fixing Cast Iron flanged strainers of following sizes with stainless steel mesh in PN 1.0 ISI marked complete all as specified and as directed.
71	100 mm bore
72	150 mm bore
73	200 mm bore
74	250 mm bore
75	300 mm bore
76	400 mm bore
77	Taking down old unserviceable CI foot valve of any size
78	Supply and fixing Cast Iron foot valve flange ends, double door of size 300mm with rubber seal ISI Marked complete all as specified and as directed.
79	Supply and fixing Cast Iron foot valve flange ends single door of size 150mm with rubber seal ISI Marked complete all as specified and as directed.
80	Labour for cutting of existing CI / DI pipe for insertion of CI specials /valvesetc. all as required including dewatering of lekage water of following size :-
81	400 mm bore pipe.
82	300 mm bore pipe.
83	200 mm bore pipe.
84	Material and labour for Rubber Gasket Joint (tyton joint)including jointingmaterial for DI/CI pipe of following sizes, complete all as specified and as directed.
85	300 mm bore
86	200 mm bore
87	150 mm bore
88	100 mm bore
89	80 mm bore
90	Taking down old unserviceable MS (ERW) pipe of following sizes :-
91	400 mm dia pipe.
92	300 mm dia pipe.
93	250 mm dia pipe.
94	200 mm dia pipe.
95	150 mm dia pipe.
96	100 mm dia pipe.
97	Supply, laying jointing & testing, MS(ERW) pipe, (Heavy duty) ofthe following sizes,6.3 mm wall thickness confirming to IS - 3589 (1981) complete all as specified and as directed.
98	400 mm dia pipe.
99	300 mm dia pipe but thickness 5.6 mm.
100	250 mm dia pipe.
101	200 mm dia pipe.
102	150 mm dia pipe but thickness 4.5 mm.
103	100 mm dia pipe.
104	Supply and fixing welded flanges on ends of MS pipe of size 400mm bore, flange not less than 15m thick, complete all as specified and as directed.
105	Ditto, all as per item No. 22 but 300 mm bore of pipe.
106	Ditto, all as per item No. 22 but 250 mm bore of pipe.
107	Ditto, all as per item No. 22 but 200 mm bore of pipe.
108	Ditto, all as per item No. 22 but 150 mm bore of pipe.
109	Ditto, all as per item No. 22 but 100 mm bore of pipe.
110	M&L for Joints with rubber or fibre board gasket of 400 mm bore complete with nut,bolt and double washers.
111	Ditto all as per item No. 23 here-in-before but 300 mm bore
112	Ditto all as per item No. 23 here-in-before but 250 mm bore
113	Ditto all as per item No. 23 here-in-before but 200 mm bore
114	Ditto all as per item No. 23 here-in-before but 150 mm bore
115	Ditto all as per item No. 23 here-in-before but 100 mm bore
116	Ditto all as per item No. 23 here-in-before but 80 mm bore
117	Taking down/out GI pipe water mains of the following sizes including all fittings complete all as specified and directed.
118	15 mm bore of pipe.
119	20 mm bore of pipe.
120	25 mm bore of pipe.
121	40 mm bore of pipe.
122	50 mm bore of pipe.
123	Refixing/laying only for GI pipe in old or new position with all fittings after cleaning thoroughly and removal of scale/blockageseffectively complete all as specified and directed, (pipe obtained from item No 24.01 to 24.05 here-in-before) including all fittings complete of following sizes :-
124	15 mm bore of pipe.
125	20 mm bore of pipe.
126	25 mm bore of pipe.
127	40 mm bore of pipe.
128	50 mm bore of pipe.
129	Supply &laying GI pipe (medium grade) including all fittings in old/new position complete all as specified and as directed of following sizes :-
130	15 mm bore of pipe.
131	20 mm bore of pipe.
132	25 mm bore of pipe.
133	40 mm bore of pipe.
134	50 mm bore of pipe.
135	M&L for Brick work with sub class \"B\" bricks, straight or curved on plan, n.exc 6 mtr mean radius in CM (1:4) complete all as specified and as directed.
136	M&L for PCC (1:4:8) type D-2 finished even and smoooth without using extra cement for foundation etc, complete all as specified and as directed.
137	M&L for PCC (1:2:4) type B-2 finished even and smoooth without using extra cement complete all as specified and as directed.
138	M&L for Rendering plaster 10 mm thick plaster on brick work/concrete surface in cement mortar (1:4) finished even and smooth without using extra cement as specified.
139	Material and labour for MS works of any sizes of angles irons/flat iron/MS sheet works for U/G Sumps for making grills and stair steps etc. complete all as specified and as directed.
140	M&L for excavation in any type of soil through trenchless technology by HDD (Horizontal directional drilling method) including preparing and setting up the plant and equipment .Preparing new pipe work material including all related civil work and mechanical work like excavation, shoring/strutting etc drilling, stringing, reaming and pulling back the new pipe work on the path alignment proper disposal of drilling fluid and ground penetrating radar survey to protect any exiting utilities at the pipe installation location restoration of site agter completion all inclusive as per and STT IS No.2.3.2.2.2.2. second edition 2008 code of pactice for trenchless technology suiting Indian condition for making horizontal bore of size 450mm dia suitable for HDPE pipe insertion under road crossing /hard standing including HDPE pipe 400 mm nominal dia of 28.3 mm min. wall thickness of grade PE 80 for protection of MS/DI pipe to any sizeby manually or any means complete all as specified and directed.Note:- (a) MS Pipe/DI will be measured and paid for seprately under respective items.(b) Permission required from civil authrority/department prior to executing the work is the responsibility of contractor and the cost for the same shall be deemed to be included in unit rate quoted by the contractor.
141	Taking down/out unserviceable waltman type flow meter complete all as specified and directed of the following sizes :-
142	100 mm bore.
143	150 mm bore.
144	200 mm bore.
145	250 mm bore.
146	300 mm bore.
147	400 mm bore.
148	600 mm bore.
149	Supply and fixing of waltman type water flow meter class \"B\" conforming to IS :779/1994 complete all as specified and as directed.
150	100 mm bore.
151	150 mm bore.
152	200 mm bore.
153	250 mm bore.
154	300 mm bore.
155	400 mm bore.
156	600 mm bore.
157	Supply and fixing in renewal of MJ collar/ DI joint of following sizes, IS:9532 complete all as specified and as directed.
158	200 mm bore pipe.
159	300 mm bore pipe.
160	400 mm bore pipe.
161	600 mm bore pipe.
162	(xi) All existing earthing of the lifts shall be maintained and made fully functional by the contractor to the entire satisfaction of the Engr-in-Charge.

Tender For Repair Replacement Maint Re-Routing Of Ci Di Gi Distribution System Including Ms Pipe Line Header And Connected Items At 2 Signal Coy And Ihq Tpt Coy, Sp Marg, Dk Ii Area, Nicholsan Range, Ridge And Rising Main Including Ms Pipe Line Head, Delhi-Delhi

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us