|
| 1 | Excavating in post holes (or similar holes) each n exc0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in SOFT/LOOSE soil complete, all as specified. |
| 2 | Fair cutting n exc 5cm width or girth on exposed surfaces of brick work such as in splays chamfers etc including rubbed finish and waste complete all as specified. |
| 3 | PCC type C-1 (1:3:6) using 20 mm graded stone aggregates as in foundation, filling & mass concrete,complete all as specified. |
| 4 | Mild steel works in hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps gusset plate including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire / mosquito wire etc.) in-cluding all necessary drilling, bolting or riveting, etc., confirming to Fe-290-Gde E-165, complete all as specified. |
| 5 | 4mm dia plain mild steel wire, galvanised class 3 straining and fixing to wood ,concrete or steel straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc as directed (each line wire to be measured) in detached work such as for mosquito net and fixing to straining bolts, hooks eyes, etc complete all as specified. |
| 6 | Running welding in repair , thickness of welded n exc 6mm complete all as specified. |
| 7 | Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified. |
| 8 | 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished rough, as in sub floors or similar locations, complete all as specified. |
| 9 | Machine cut Kota stone slab flooring 18-22 mm thick and of size not less than 550x550 mm, in floors, laid over over & including 20 mm thick (average thickness) cement mortar (1:6) screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified. |
| 10 | Machine cut Kota stone slab 18-22mm thick on vertical surfaces as in staircase riser skirting/ dado etc over and including 10 mm thick rendering in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified. |
| 11 | Rendering 5 mm thickon fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified. |
| 12 | Rendering 15 mm thickon fair faces of brick work or concrete surfaces, finished even and fairon walls in cement mortar (1:6)complete all as specified. |
| 13 | Three coats of white washing on new undecorated ceiling surfaces, including preparation of surfaces, complete all as specified. |
| 14 | Two coats of white wash on old ceiling surfaces, including preparation of surfaces, complete all as specified. |
| 15 | Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in 3mm thick& smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemperover and including a coat of acrylic emulsion primer. |
| 16 | Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in 3mm thick& smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemperover and including a coat of acrylic emulsion primer |
| 17 | Preparation of old painted wood and wood basedsurfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified. |
| 18 | Peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified. |
| 19 | Two coatsof synthetic enamel paint over & including a coat of red oxide primer over steel or iron (new) surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified. |
| 20 | Taking down cement plaster of any description on brick walls or concrete surfaces etcincluding raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 21 | Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified |
| 22 | Dismantling wrought iron or structural steel works or of any description / type including doors, gates etc complete all as specified. |
